1-Chip DLP™RGB Laser Projector

PT-HTQ20

DISPONIBLE À PARTIR DU QUATRIÈME TRIMESTRE 2026

Une nouvelle référence en projection 4K : Rec.2020, 20 000 lm et une précision d’image exceptionnelle

20 000 lm Laser mono-DLP™ RGB 4K+ Slot compatible Intel® SDM

En savoir plus sur Vivid Prime™ Voir les spécifications Partager la page

Key features of PT-HTQ20

Principales caractéristiques

Immersive Visual Expression for Diverse Environments

Flexible Installation with Flagship Features

High Reliability for Demanding Applications

PT-HTQ20
Luminosité	20 000 lm¹ / 20 000 lm (ANSI) ⁹ / 20 400 lm (Centre) ¹⁰ (À déterminer)
Résolution	4K (3840 x 2400 pixels)²
Dimensions (L x H x P)	Environ 590 x 220 x 600 mm (23 7/32 x 8 21/32 x 23 5/8") (Hors pieds, parties dépassant et optique) (À déterminer)
Poids¹⁰	Environ 38 kg (83,8 lbs) (à déterminer)

_{1. Lorsque [MODE IMAGE] est réglé sur [DYNAMIQUE] et [LIGHT POWER] est réglé sur [NORMAL]. Les mesures, les conditions de mesure et la méthode de notation sont conformes aux normes internationales ISO/IEC 21118: 2020. La valeur est la moyenne de tous les produits lorsqu’ils sont expédiés.}
_{2. La résolution physique maximale est de 3840 x 2400 pixels avec le lecteur Quad Pixel Drive [ON].}
_{3. La fréquence d’images d’affichage correspond à la fréquence d’images du signal d’entrée.}
_{4. À l’exception des optiques des séries PT-RQ50K et D75 (à l’exception des ET-D75LE95).}
_{5. Spécifications préliminaires uniquement pour les États-Unis. La luminosité maximale nécessite AC 120 V ou plus. Le fonctionnement à 100 V est pris en charge, mais la luminosité peut être réduite. La luminosité peut également être réduite selon l’environnement de fonctionnement, quel que soit le taux de tension d’alimentation.}
_{6. Les cartes fonctionnelles propriétaires et tierces en option sont vendues séparément. Panasonic Projector & Display Corporation ne peut pas garantir le fonctionnement des appareils de tiers.}
_{7. Visual Software Suite pour Windows® est disponible gratuitement sur le site web de PASS. Certaines fonctionnalités décrites peuvent nécessiter une utilisation avec un processeur multimédia ET-FMP50 Series optionnel et un appareil compatible (vendu séparément).}
_{8. L’attribution des terminaux principal et de secours est fixe. Les signaux d’entrée doivent être identiques.}
_{9. Lorsque [PICTURE MODE] est défini sur [DYNAMIC] et [LIGHT POWER] est défini sur [NORMAL]. La mesure, les conditions de mesure et la méthode de notation sont toutes conformes aux normes de l’American National Standards Institute. La valeur est la moyenne de tous les produits au moment de l’expédition.}
_{10. Valeur lumineuse moyenne de tous les produits expédiés mesurée au centre de l’écran en mode [NORMAL].}
_{11. Nécessite une carte terminal DIGITAL LINK TY-SB01DL en option. Format YPBPR 4:2:0 uniquement pour l’entrée de signaux 4K/60p via DIGITAL LINK.}

Une immersion nouvelle grâce au gamut Rec. 2020, 20 000 lm et à la technologie laser RGB VIVID PRIME™

Grâce au laser RGB VIVID PRIME™, le PT‑HTQ20 déploie toute la richesse du gamut Rec. 2020 pour projeter 20 000 lm¹ de couleurs intenses et nuancées, avec une fidélité chromatique inédite en mono‑DLP, capables de métamorphoser toute installation immersive. Avec une luminosité de couleur proche des modèles 3DLP™, son architecture exclusive RGB + phosphore conserve des dégradés naturels pour les contenus Rec. 709 et réduit significativement l’effet arc‑en‑ciel. Le vidéoprojecteur restitue des images 4K² fluides grâce à la technologie Quad Pixel Drive, et prend en charge la lecture 2K/240 Hz³ pour les contenus ultra‑rapides. La fonction Gradation Smoother, améliorée, propose désormais jusqu’à six niveaux d'ajustements pour atténuer les effets de banding.

En savoir plus sur Vivid Prime™

Wide-Gamut Colour Supporting Rec.2020

VIVID PRIME™ supports the Rec.2020 colour gamut for more vivid, lifelike images. For Rec.709 content, it delivers 3-Chip DLP™-equivalent colour brightness with smoother tonal gradation. Rec.709 content can also be projected in Rec.2020 mode for enhanced colour expression on coloured projection surfaces or in bright environments.

Colour-Wheelless Design Reduces Rainbow Effect

Built on integrated RGB laser phosphor technology, VIVID PRIME™ combines high-speed colour switching—more than five times faster than conventional colour-wheel systems—with optimised DMD sequencing to produce smooth, clear images while significantly reducing rainbow effect for a natural, comfortable viewing experience.

Optimised Picture Modes for Diverse Applications

Dedicated picture modes optimise image reproduction for different source formats, content, and production environments, including NATURAL, CINEMA, REC709, REC2020, and the new DIGITAL ART mode supporting DCI-P3 color reproduction for immersive art experiences.

Smooth 4K Images with Quad Pixel Drive

Refined and improved over three generations of development, Quad Pixel Drive enhances perceived 4K image detail by applying high-speed pixel shifting in both the vertical and horizontal directions. Combined with 240 Hz signal processing, the system divides each frame into sub-frames and precisely aligns them on screen to create a denser, smoother image with reduced visible pixel structure. The result is exceptionally smooth, detailed 4K images, even at close viewing distances.

_{Note: Displayed resolution 4K (3840 x 2400 pixels) with QUAD PIXEL DRIVE: [ON].}

Supports High-Speed 240 Hz Video

The PT-HTQ20 supports 1080p/240 Hz video playback for smooth reproduction of fast motion with minimal blur with input-to-output latency of less than 6 ms. High-speed content can be displayed across multiple screens with edge blending enabled, ideal for eSports and other applications where fluid, low-latency motion reproduction is important.

_{Note: Image for illustration only. Supports input signals up to 1080p. The display frame rate corresponds to the input signal frame rate. Latency depends on the input signal, the peripheral devices used, and other factors.}

Improved 25,000:1 Dynamic Contrast Technology

Dynamic Contrast technology has been enhanced to achieve a 25,000:1 contrast ratio. Advanced scene analysis enables more precise recognition of light and dark areas, improving overall contrast expression. The system analyses content frame by frame and dynamically adjusts light output to match the requirements of each scene.

_{Note: Contrast ratio measured Full On/Full Off with Dynamic Contrast [3]. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards. Value is the average of all products when shipped.}

Gradation Smoother 2 – Precise and Powerful Control

Gradation Smoother 2 reduces banding noise in colour gradients. The updated system expands adjustment from three to six correction levels, enabling finer control and more effective suppression of noise in challenging material. Users can select the appropriate level via the remote or disable the function when not required, minimising the need for content re-editing.

_{Note: Projectors ship with Gradation Smoother 2 set to a factory default of [2].}

Une installation flexible, enrichie de fonctionnalités haut de gamme

Le PT‑HTQ20 apporte les performances et la flexibilité du Tri-DLP™ dans une plateforme mono‑DLP, avec un format compact proche du PT-RQ25K et une compatibilité avec les optiques des vidéoprojecteurs Panasonic Tri-DLP™⁴. La pleine luminosité est maintenue en alimentation 120–240 V⁵, ouvrant davantage de possibilités d’intégration. Outre une entrée 12G/3G/HD‑SDI, le vidéoprojecteur dispose d’un slot Intel® SDM permettant l’ajout de cartes fonctionnelles, notamment le processeur média ET-SBFMP10 ⁶, et s’intègre à la suite logicielle VSS⁷ pour automatiser les workflows de réglages avancés.

Compatible with D3LE-Series Lenses for Panasonic 3-Chip DLP™ Projectors

The PT-HTQ20 is compatible with current-generation D3LE-series lenses used with most Panasonic 3-Chip DLP™ projectors, helping to maximise asset utilisation and reduce the total cost of ownership. High-quality optics with Lens ID, Lens Memory, and Active Focus Optimizer (AFO) functions ensure precise setup and optimal image performance.

_{Note: Throw distances listed are for a 300-inch (16:10) image. The ET-D75LE95 ultra-short-throw lens is also supported. Lens ID, Lens Memory, and AFO are not available with some lenses.}

Efficient Logistics and Shared Compatibility

With compact body dimensions similar to the PT-RQ25K Series, the PT-HTQ20 can be carried by a crew of two, easing transport, storage, and deployment demands. Recessed side grips improve handling, while compatibility with existing PT-RQ25K Series frames, flight cases, and D3LE-series lenses helps streamline fleet upgrades and maximise return on existing assets.

_{Note: Some legacy lenses compatible with the PT-RQ25K Series are incompatible with the PT-HTQ20. See the optional accessories section.}

Operates on AC 100–120 V for Setup

The PT-HTQ20 supports both AC 200–240 V power for full-brightness projection and AC 100–120 V for setup and calibration. Complete setup and image calibration using power from the consumer grid and avoid delays while high-voltage power is rolled out on site.

_{Note: The maximum light output value is limited to less than 20,000 lm when using the projector with AC 100–120 V. However, the maximum value of light output is further decreased in following cases: When the projector is used with a voltage lower than AC 120 V; when ambient temperature exceeds 25 °C (77 °F); when a function board is installed in the slot; when an external device is connected to the <USB (DC OUT)> terminal; when the light source has deteriorated from use; or when there is dust on the optical parts.}

12G-SDI Input and Intel^® SDM Standard-Compatible Slot

The PT-HTQ20 equips a 12G-SDI input as standard, enabling stable transmission of high-bandwidth, high-resolution video content over long distances. An Intel^® SDM standard-compatible SLOT integrates optional third-party or proprietary function boards such as our ET-SBFMP10 Media Processor, which simplifies complex multi-projector systems and reduces setup time for projection mapping and other large-scale installations.

_{Note: Optional proprietary and third-party function boards are sold separately. The operation of third-party devices cannot be guaranteed.}

Flexible Black-Level Adjustment for Curved Screens

Black-level adjustment on curved and irregular screens is now more precise. Up to 33 adjustable control points—the highest number on any Panasonic projector to date—allow black-level adjustment boundaries to be reshaped to follow warped blend edges, enabling accurate black-level matching across blended areas for more seamless multi-screen images.

PT-RQ50K - Compatible with Visual Software Suite

Compatible with Visual Software Suite (VSS)

Visual Software Suite is a free, Windows^®-based platform that combines multiple functions into one intuitive graphical interface, enabling swift and efficient setup and onsite adjustments. Integrating and enhancing the capabilities of previously separate Panasonic software, it transforms your workflow into streamlined and cost-effective processes.

_{Note: Some described functions require use with an optional ET-FMP50 Series media processor and camera(s) (sold separately). Compatible cameras comprise NIKON D5200/D5300/D5500/D5600/D7500/Z50/Z5 and the IDS GV-5890CP-C-HQ. Note that the PT-HTQ20 is incompatible with Geometry Manager Pro software.}

Automatic Black-Level Matching with VSS

Visual Software Suite automatically matches black levels in overlapping areas of edge-blended horizontal and vertical images using an optional IDS or compatible Nikon camera, creating more seamless, uniform multi-screen images.

_{Note: Compatible cameras (sold separately) comprise NIKON D5200/D5300/D5500/D5600/D7500/Z50/Z5 and the IDS GV-5890CP-C-HQ.}

Optional Media Processors to Simplify Multi-Projection

The PT-HTQ20 works with Panasonic’s optional ET-FMP50 Series media processors to simplify multi-projection complexity. The processors, which comprise box-type and function board-type for the projector's Intel^® SDM standard-compatible SLOT, feature automatic warping/blending and media playback capabilities.

_{Note: Some described functions require use with a compatible camera(s). Compatible cameras (sold separately) comprise NIKON D5200/D5300/D5500/D5600/D7500/Z50/Z5 and the IDS GV-5890CP-C-HQ.}

Check Settings and Status with Information Monitor

A 2.4-inch OLED Information Monitor displays real-time operating status, including temperature, voltage, runtime, input signal, error codes, and projector posture with the newly added Angle Monitor function. Use the keypad to configure network settings, check system status, or update firmware while the projector is in standby, eliminating the need to project the OSD and streamlining setup and maintenance.

Contrast Sync and Shutter Sync via LAN

Enhanced multi-projector contrast and shutter sync is now supported over LAN only or, if preferred, conventional daisy-chain BNC connections. Reduce cabling requirements, lower system costs, and simplify installation without compromising on performance.

Smart Projector Control App Integration

Smart Projector Control app enables the control and adjustment of up to 64 projectors from a smartphone or tablet over wireless LAN. Access the projector menu via the Web Control UI and manage key functions including test pattern selection, lens setup, shift, zoom, and focus via the device camera, as well as shutter operation, brightness locking, and status monitoring.

_{Note: Available free from the App Store or the Google Play store. Some mobiles do not support the focusing function via the device camera.}

USB Control Connect: App Control Without Wireless LAN

Avoid delays during projector setup when network infrastructure is not yet available on site. USB Control Connect enables use of the Smart Projector Control app via a USB connection, allowing installers to perform screen adjustments and configure settings directly from their mobile device. Improve setup efficiency and keep your project on schedule.

NFC Function: Prep Without AC Power

Prepare your projectors before power is available on site and reset them after use without on-screen menu projection. Using the Smart Projector Control app and NFC, installers can assign projector IDs, set IP addresses, and prepare units for network connection while unplugged. After the event, settings can be initialised to factory defaults prior to crating, streamlining teardown and ensuring projectors are ready for the next deployment.

Pre-Show Video Checks with Remote Preview

Remote Preview allows projectionists to verify input signals via video thumbnails before projection. Accessible via Multi Monitoring & Control Software or web browser, it works in Standby or with the mechanical shutter activated, helping identify issues in advance and reduce on-site errors when screen access is limited.

Angle Monitor for Convenient, Resource-Friendly Adjustment

The PT-HTQ20 features a built-in sensor that detects changes in the projector’s pitch and roll angles, which can be displayed in the settings menu, over a test pattern, or via the projector’s Information Monitor display. A single technician can view the information and adjust the projection angle without needing assistance from another team member.

Fiabilité maximale pour les environnements exigeants

Le bloc optique résistant à la poussière, associé à un système de refroidissement avancé et un design sans filtre, garantit une fiabilité durable tout en limitant les besoins de maintenance. Un shutter mécanique intégré protège le DMD des effets de lumière scénique, et les cartes électroniques clés bénéficient d’un revêtement propriétaire pour améliorer la résistance à la poussière et à l’humidité dans les conditions difficiles. Les fonctions Backup Input⁸ et Multi‑Laser Drive Engine minimisent les interruptions lors des présentations critiques.

Coated Circuit Boards for Enhanced Durability

Selected circuit boards are treated with a proprietary coating that helps suppress corrosion caused by moisture and dust. This added layer of protection improves reliability in harsh environments. By reducing the impact of environmental factors on key components, the design supports stable, long-term operation in demanding conditions.

_{Note: Outdoor installation is not possible. Use of an enclosure is recommended in environments containing smoke, salt, oil, conductive dust, moisture, and other airborne contaminants.}

Built-In Mechanical Shutter

The PT-HTQ20 features an internal mechanical shutter. Designed for live event environments where laser lighting is often used, the shutter helps protect the DMD chip by blocking stray laser beams that may enter through the projection lens, reinforcing reliability in demanding production settings.

Low-Maintenance, Dust-Resistant Design

The PT-HTQ20’s optical engine and laser light source conform to the IP5X Dust Protected (IEC 60529) standard, eliminating the need for an air filter and reducing maintenance requirements. Sealed liquid-cooling system and refined airflow path help stabilise performance in demanding conditions. Reliability is proven through accelerated dust testing based on in-house standards, simulating environments with high levels of airborne particulates.

_{Note: The Dust Protected performance of this unit is not guaranteed to be free from damage or failure under all conditions (environments with conductive dust, etc.). Please use an enclosure in environments with smoke containing oil, salt, and moisture.}

Backup Input for Reliable Signal Redundancy

Backup Input mode safeguards projection by enabling automatic failover between two identical signals. When the source outputs the same content to designated primary and backup inputs—either HDMI™ or SDI—the projector instantly switches to the backup if the main signal is lost, with no screen blanking. This reduces the chance of image display interruption and provides greater peace of mind in mission-critical environments.

_{Note: The combination of primary and backup terminal assignments is fixed and input signals must be identical. Backup Input mode for SDI requires an optional TY-SB01QS 12G-SDI Terminal Board.}

Failover Circuitry Minimises Interruptions

Multiple laser modules incorporate unique Failover Circuitry. If a single diode fails, only the affected series is bypassed rather than the entire module, as with some conventional designs. Projection continues uninterrupted with minimal loss of brightness, providing an added layer of reliability where continuous image display is critical.

Reduced Operating Noise

To reduce the chance of distraction and maintain audience immersion in quiet production environments, operating noise in NORMAL/ECO mode is limited to just 42 dB—significantly lower than PT-RQ25K Series in the same operating mode.

Additional Features

Supports Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX^® DD, PJLink™, IPv6¹ and Web API
Data-cloning function via LAN or USB²
1 USB port for data communication and DC 5 V/2 A power supply
Compatible with the Multiple PJ Firmware Batch Update Tool
HDMI™ Auto Equalisation Function
Updated Web UI interface and screen marker tools
Multi-screen Support System
Multi-Unit Brightness and Colour Control
Waveform Monitor Function
Free 360-degree installation

_{1 Optional AJ-WM50 Series Wireless Module is not compatible with IPv6.}

_{2 Data-cloning is supported among identical models with the same resolution. Excludes passwords, projector ID, and network settings.}

Playlist

4 videos

Specifications of PT-HTQ20

Tableau des spécifications

Projector type	1-Chip DLP^TM RGB laser projector
Display method	DLP^TM chip x 1, DLP^TM projection system
Display Device -> Panel size	24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
Display Device -> Number of pixels	2,304,000 pixels (1920 x 1200 dots)
Light source	Laser diodes (Red LD, Green LD, Blue LD)
Light output	20,000 lm
Light output (ANSI)^1^3	20,000 lm
Light output (Center)^1^4	21,000 lm (Center)

Voir les spécifications Download specifications

Accessoires & Logiciels

ET-D3LES250

Optique zoom à rapport de projection 1,79-2,59:1 pour vidéoprojecteurs 3DLP™

Voir le produit

Devis

ET-D3LEW600

4K / WUXGA (0.924-1.28:1) 4K / WUXGA (1.12-1.55:1)(PT-RQ25K Series) Zoom lens for PT-RQ45K/RZ44K, PT-RQ35K2/RZ34K2, PT-RQ25K, PT-RZ24K, PT-RQ18K, PT-RZ17K, PT-HTQ20 with Auto Lens Identification and Stepping Motor

Voir le produit

Devis

ET-D3LET30

4K / WUXGA (2.40-4.66:1) 4K / WUXGA (2.88-5.61:1)(PT-RQ25K Series) Zoom lens for PT-RQ45K/RZ44K, PT-RQ35K2/RZ34K2, PT-RQ25K, PT-RZ24K, PT-RQ18K, PT-RZ17K, PT-HTQ20 with Auto Lens Identification and Stepping Motor

Voir le produit

Devis

ET-D3LEU101

Produisez des images spectaculaires à courte distance avec les nouvelles optiques zero offset

Voir le produit

Devis

Showing 4 of 12

ET-PKD520S

Support pour plafond bas

Voir le produit

Devis

ET-PLF20

Lens Fixed Attachment, compatible with PT-RQ45K/RZ44K, PT-RQ35K2/RZ34K2, PT-RQ35K/RZ34K, PT-RQ32K, PT-RZ31K/RS30K, PT-RQ22K, PT-RQ25K, PT-RZ24K, PT-RQ18K, PT-RZ17K, PT-RZ14K, PT-RZ21K/RS20K, PT-RZ16K, PT-RQ13K, PT-RZ12K, PT-RS11K, PT-HTQ20

Voir le produit

Devis

Showing 2 of 2

TY-SB01FB

La carte de fonction optique 12G-SDI à fibre optique (TY-SB01FB) est compatible avec les vidéoprojecteurs de la série PT-RQ7.

Voir le produit

Devis

Showing 1 of 1

ET-SBFMP10

Les premiers processeurs média Panasonic simplifient la création d'expériences immersives en multi-projection

Voir le produit

Devis

ET-FMP20

Les premiers processeurs média Panasonic simplifient la création d'expériences immersives en multi-projection

Voir le produit

Devis

Showing 2 of 2

ET-SBFMP10

Les premiers processeurs média Panasonic simplifient la création d'expériences immersives en multi-projection

Voir le produit

Devis

ET-FMP20

Les premiers processeurs média Panasonic simplifient la création d'expériences immersives en multi-projection

Voir le produit

Devis

Showing 2 of 2

Avis relatif au règlement européen sur les données (EU Data Act) concernant les données générées par nos produits

Connectez-vous avec Panasonic Visual

Full specifications

Download specifications

Projector type	1-Chip DLP^TM RGB laser projector
Display method	DLP^TM chip x 1, DLP^TM projection system
Display Device -> Panel size	24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
Display Device -> Number of pixels	2,304,000 pixels (1920 x 1200 dots)
Light source	Laser diodes (Red LD, Green LD, Blue LD)
Light output	20,000 lm
Light output (ANSI)^1^3	20,000 lm
Light output (Center)^1^4	21,000 lm (Center)
Time until light output declines to 50 % -> NORMAL^*4	20,000 hours [NORMAL]
Time until light output declines to 50 % -> ECO^*4	24,000 hours [ECO]
Résolution^*6	4K (3840 x 2400 dots) (Quad Pixel Drive: ON)
Contrast Ratio (typ.)^*5	25,000:1 (All white/All black, Dynamic Contrast [3])
Screen size (diagonal)	1.78–25.40 m (70–1000 in) (Depending on attached lens)
Center-to-corner zone ratio^*2	90 %
Lens	Optional (No lens included with this model)
Lens shift -> Vertical(from center of screen)　^*7	±55 % (+68 % to +78 % with ET-D75LE95, ±48 % with ET-D3LEW201, ±44 % with ET-D3LEW60/D3LEW300/D3LEW600,±27 % with ET-D3LEF70) (Powered)
Lens shift -> Horizontal(from center of screen)　^*7	±20 % (±15 % with ET-D3LEW60/D3LEW300/D3LEW600/D3LEW201, 0 % to +25 % with ET-D3LEU101,±12 % with ET-D75LE95/D3LEF70) (Powered)
Installation	Ceiling/floor, front/rear, free 360-degree installation
Terminals -> SDI IN	12G/3G/HD-SDI signal compatible
Terminals -> HDMI^™ IN	HDMI^TM x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)
Terminals -> MULTI PROJECTOR SYNC IN	BNC x 1, TTL high impedance
Terminals -> MULTI PROJECTOR SYNC OUT	BNC x 1, TTL output: Maximum 10 mA
Terminals -> SERIAL IN	D-sub 9-pin (Female) x 1 for external control (RS-232C compliant)
Terminals -> REMOTE 1 IN	M3 stereo mini-jack x 1 for wired remote control/projector connection control
Terminals -> REMOTE 1 OUT	M3 stereo mini-jack x 1 for wired remote control/projector connection control
Terminals -> LAN	RJ-45 x 1 for network connection, PJLink^TM(Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals -> SLOT	Slot x 1, open slot, for function boards, Intel® SDM standard-compatible
Protocol versions	IPv4, IPv6^*7
Power supply	Single-phase AC 100–120 V^*8 / Single-phase AC 200–240 V, 50/60 Hz
Maximum power consumption	AC 100–120 V: 1,430 W (1,440 VA), AC 200–240 V: 1,450 W (1,465 VA)
On-mode power consumption(Operating mode) -> Normal^*12	1,200 W(AC 100–120V), 1,165 W(AC 200–240V)[NORMAL]
On-mode power consumption(Operating mode) -> Eco^*12	990 W(AC 100–120V), 950 W(AC 200–240V)[ECO]
Cabinet materials	Molded plastic, processed metal parts
Operation noise -> Normal^*5	42 dB [NORMAL]
Operation noise -> Eco^*2	42 dB [ECO]
Dimensions (W x H x D)	Approx. 590 x 220 x 600 mm (23 7/32˝ x 8 21/32˝ x 23 5/8˝ ) (Excluding feet, protruding parts, and lens)
Weight [kg]^*10	Approx. 38.7 kg (85.3 lbs)
Operating environment -> Operating temperature^*11	0–45 °C (32–113 °F)
Operating Environment -> Operating humidity (No condensation)	10–80 % (no condensation)
Applicable software	Multi Monitoring & Control Software, Visual Software Suite, Projector Network Setup Software, Smart Projector Control for iOS/Android^TM
Control function via LAN	Crestron Connected^TM V2, Crestron XiO Cloud^TM, Art-Net, AMX® DD, Extron® XTP^*13, and PJLink^TM (Class 2), Web API
Terminals -> USB TYPE A	USB connector Type A x 1 for connecting optional AJ-WM50 Series Wireless Module/USB memory or for power supply (DC 5 V, 2 A)
Filtre	Yes
Body Colour	Black
NFC	No
Active 3D	No
SDM	Yes
EAN	HTQ20E: 8887549896613 HTQ20EJ: 5025232987528
Gross Dimensions (W x H x D in mm)	PT-HTQ20E: 836 x 836 x 442 mm PT-HTQ20EJ: 849 x 849 x 452 mm
Gross Weight (Kg)	PT-HTQ20E: 46.5 kg(102.6 lbs) PT-HTQ20EJ: 48.3 kg(106.4 lbs)
Keystone correction range^*9	Vertical: ±40 ° (±45 ° with ET-D3LET30/D3LET40/D3LET80, ±28 ° with ET-D3LEW60/D3LEW600,±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW201/D3LEW300, ±8 ° with ET-D3LEU101, +5 ° with ET-D75LE95);Horizontal: ±40 ° (±15 ° with ET-D3LEW50/D3LEW60/D3LEW600, ±5 ° with ET-D3LEU101/D3LEW201/D3LEW300,0 ° with ET-D75LE95)When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously,correction cannot be made exceeding total of 55 °.
Notes de bas de page	This is the value when the Zoom Lens (Model No.: ET-D3LES250) is used. The value varies depending on the lens. When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped. Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped. Average light-output value of all shipped products measured at the center of screen in NORMAL Mode. Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE] set to [DYNAMIC], [DYNAMIC CONTRAST] set to [3]). Estimated time until light output declines to 50 % varies depending on environment. Optional AJ-WM50 Series Wireless Module is not compatible with IPv6. The maximum light-output value is limited to 20,000 lm or less when operating on AC 100–120 V power. The maximum light-output value may be further reduced depending on operating conditions. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft). Average value. May differ depending on the actual unit. The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft) above sea level. Note that altitude of 4,200 m (13,780 ft) above sea level is the maximum height that the performance of this projector is guaranteed. When using the projector at an altitude lower than 1,400 m (4,593 ft) above sea level, and the operating environment temperature becomes 35 °C (95 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 1,400 m (4,593 ft) and 2,700 m (8,858 ft), and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector. Do not use the projector in a location where the ambient temperature exceeds 40 °C (104 °F) regardless of the altitudewhen the optional AJ-WM50 Series Wireless Module is attached to the projector. Only when the optional TY-SB01DL DIGITAL LINK Terminal Board is loaded.

1-Chip DLP™RGB Laser Projector

PT-HTQ20

Key features of PT-HTQ20

Principales caractéristiques

Une immersion nouvelle grâce au gamut Rec. 2020, 20 000 lm et à la technologie laser RGB VIVID PRIME™

Wide-Gamut Colour Supporting Rec.2020

Colour-Wheelless Design Reduces Rainbow Effect

Optimised Picture Modes for Diverse Applications

Improved 25,000:1 Dynamic Contrast Technology

Gradation Smoother 2 – Precise and Powerful Control

Une installation flexible, enrichie de fonctionnalités haut de gamme

Compatible with D3LE-Series Lenses for Panasonic 3-Chip DLP™ Projectors

Efficient Logistics and Shared Compatibility

Operates on AC 100–120 V for Setup

12G-SDI Input and Intel® SDM Standard-Compatible Slot

Flexible Black-Level Adjustment for Curved Screens

Compatible with Visual Software Suite (VSS)

Automatic Black-Level Matching with VSS

Optional Media Processors to Simplify Multi-Projection

Check Settings and Status with Information Monitor

Contrast Sync and Shutter Sync via LAN

Smart Projector Control App Integration

USB Control Connect: App Control Without Wireless LAN

NFC Function: Prep Without AC Power

Pre-Show Video Checks with Remote Preview

Angle Monitor for Convenient, Resource-Friendly Adjustment

Fiabilité maximale pour les environnements exigeants

Coated Circuit Boards for Enhanced Durability

Built-In Mechanical Shutter

Low-Maintenance, Dust-Resistant Design

Backup Input for Reliable Signal Redundancy

Failover Circuitry Minimises Interruptions

Reduced Operating Noise

Additional Features

Playlist

Specifications of PT-HTQ20

Tableau des spécifications

Accessoires & Logiciels

ET-D3LES250

ET-D3LEW600

ET-D3LET30

ET-D3LEU101

ET-PKD520S

ET-PLF20

TY-SB01FB

ET-SBFMP10

ET-FMP20

ET-SBFMP10

ET-FMP20

Ressources et téléchargements

Connectez-vous avec Panasonic Visual

Une immersion nouvelle grâce au gamut Rec. 2020, 20 000 lm et à la technologie laser RGB VIVID PRIME™

12G-SDI Input and Intel^® SDM Standard-Compatible Slot