AJ-PX230

Discontinued

Handheld P2HD Broadcast Camcorder

Key features

AVC-Intra 200100/50 + AVC-LongG50/25/12
High quality 10bit/4:2:2 recording video recording
New compact / lightweight 22x lens (f=28mm-616mm/35mm)
Professional Outputs for Flexible Shooting
Dual microP2 card slots for cost efficient microP2 cards

P2HD handheld camera recorder to feature the AVC-ULTRA*1 codec family and microP2 cards

Master Qu​ality Codecs

The AJ-PX230 is a P2HD handheld camera recorder with AVC-ULTRA recording and built-in microP2 card slots. In addition to the established AVC-Intra100, the AJ-PX230 has AVC-LongG for extended recording and the optional AVC-Intra200 codec for master level recording offering a wide range of choice. This handheld camera features two built-in microP2 card slots with simultaneous recording functionality and an especially designed multipurpose compact zoom lens.

The AJ-PX230 covers both low-bit rate and high-bit rate recording thanks to its inherent support of the AVC-ULTRA codec family. The AVC-LongG25 enables extended 1920 x 1080 10 bit 4:2:2 broadcast-quality recording (four times longer than AVC-Intra100). The AJ-PX230 also supports DV, DVCPRO, DVCPRO50 as standard for SD recording and DVCPRO HD, AVC-Intra 50, AVC-Intra 100 along with the new AVC-LongG12, G25 and G50 as standard for HD recoding. For even higher quality recording, the AJ-PX230 supports the visually lossless AVC-Intra 200 codec, as an option for master quality all in one compact handheld camera.

Superb Image Quality - High Quality, High Sensitivity Sensor

Additional features of the camera include a newly designed built-in compact 22x zoom lens which covers a wide range from 28mm to 616mm (35mm camera equivalent). The three lens rings for Cam-Type Zoom, Focus and Iris operation provide comfortable manual control similar to that of interchangeable lenses. The newly developed high-sensitivity and low-noise 1/3 type 3MOS sensors produce superb image quality, even in dim light.

Ultimate Cost Effective Operation

Two microP2 card slots enable cost-effective operation. With the same reliability as the P2 card, the microP2 cards can be used without an adapter for either relay recording, when one card is full the AJ-PX230 seamlessly switches to the second card to continue recording; or simultaneous recording, where the same codec is recorded on to both cards at the same time for backup use. The microP2 slots can be used with standard SD cards for even greater efficiency when recording*3 codec’s with 50Mbps or less.

Professional Outputs for Flexible Shooting

The AJ-PX230 has all the A/V connections you would expect on a professional camera, including SD/HD/3G-SDI output and HDMI. The AJ-PX230 has two 3 pin XLR audio inputs; one in front behind the microphone mount for easy connection to an external mic and one at the rear side of the camera. 

New Ergonomic, Compact and Intuitive Design

The ergonomic design of the AJ-PX230 sees the common video and audio connections mounted on the side of the camera, keeping them out of the way when cables are connected. When it comes to control layout, the low weight and well balanced AJ-PX230 takes many of its inspirations from the professional shoulder mount style cameras. White balance and video gain control toggle switches are positioned easily to hand under the lens and an audio fader control and record start/stop are located at the front of the camera.

Please click here for a list of operation manuals to download.

*1: AVC-ULTRA is the name of Panasonic's professional video codec family. The AJ-PX230 does not support all of the formats included in the AVC-ULTRA family.
*2: Not all codec's support 10bit 4:2:2
*3 Not all SD cards are guaranteed to work with the AJ-PX230EJ or record. Recording speeds are limited to a maximum 50Mb/s.

Specifications table

General
PowerDC 7.2 V (when the battery is used) DC 12 V (when the AC adapter is used)
Power Consumption19.5 W (when the LCD monitor is used)
Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity10 % to 80 % (no condensation)
WeightApprox. 2.2 kg (4.9 lbs.) (body only, excluding lens hood, battery, and accessories) Approx. 2.6 kg (5.7 lbs.) (including lens hood, supplied battery, and microphone holder)
Dimensions176 mm (H) x 171 mm (W) x 329 mm (D) (excluding protrusions) (6-15/16 inches × 6-23/32 inches × 12-15/16 inches)
Camera Unit

Accessories & Software

Batteries and Chargers

AG-VBR118G

Battery for AG-DVX200 4K Camcorder and AJ-PX270 Handheld HD Broadcast Camcorder

Batteries and Chargers

AG-VBR89G

Battery for AG-DVX200 4K Camcorder and AJ-PX270 Handheld HD Broadcast Camcorder

Batteries and Chargers

AG-VBR59

Battery for AG-DVX200 4K Camcorder and AJ-PX270 Handheld HD Broadcast Camcorder

Batteries and Chargers

AG-BRD50

The AG-BRD50 Dual Battery Charger can be used with the AG-VBR battery series (AG-VBR118, AG-VBR89 & AG-VBR59) for AG-DVX200 and AJ-PX270.It is also compatible with the VW-VBD55 (AG-AC90 series) and VW-VBG6 batteries (AG-AC160/-130 series).

Showing 4 of 4

Microphones & Holders

AG-MC200G

XLR microphone

Showing 1 of 1

Mobile Solutions

AJ-PG50

Portable field recorder with AVC-ULTRA*1 codec and microP2 card compatibility, HDMI input/output, and data transfer over a network

Showing 1 of 1

Mobile Solutions

AJ-PG50

Portable field recorder with AVC-ULTRA*1 codec and microP2 card compatibility, HDMI input/output, and data transfer over a network

Showing 1 of 1

microP2 cards

AJ-P2AD1G

This adapter extends the benefits of the microP2 cards to existing P2 card user by adapting the SD form factor of the microP2 card into the PCMCIA form factor of the P2 card*.  Furthering the versatility of the microP2 card adapter, its design allows Class 10 or high-quality SD cards to be used in emergency situations to record content (at bit rates only up to 50Mbps) on P2 products.

  • The microP2 card and microP2 card adapter will not support all P2 products. To use the microP2 card adapter, a firmware upgrade of current P2 hardware is required and a fee maybe charged.

Showing 1 of 1

microP2 cards

AJ-P2AD1G

This adapter extends the benefits of the microP2 cards to existing P2 card user by adapting the SD form factor of the microP2 card into the PCMCIA form factor of the P2 card*.  Furthering the versatility of the microP2 card adapter, its design allows Class 10 or high-quality SD cards to be used in emergency situations to record content (at bit rates only up to 50Mbps) on P2 products.

  • The microP2 card and microP2 card adapter will not support all P2 products. To use the microP2 card adapter, a firmware upgrade of current P2 hardware is required and a fee maybe charged.

Showing 1 of 1

Related resources

Showing 12 of 25

Sorry there was an error...
The files you selected could not be downloaded as they do not exist.

You selected items.
Continue to select additional items or download selected items together as a zip file.

You selected 1 item.
Continue to select additional items or download the selected item directly.

Download selected file