1-Chip DLPTM RGB Laser Projector

PT-HTQ20

AVAILABLE FROM CY2026 Q4

Redefining Immersive Experiences with Rec. 2020 Color, 20,000 lm¹ Brightness, and Detailed 4K² Resolution

View specifications Share page

Key features of PT-HTQ20

Key features

Immersive Visual Expression for Diverse Environments

Flexible Installation with Flagship Features

High Reliability for Demanding Applications

PT-HTQ20
Light Output	20,000 lm¹ / 20,000 lm (ANSI)⁹ / 20,400 lm (Center)¹⁰ (TBD)
Resolution	4K (3840 x 2400 pixels)²
Dimensions (W x H x D)	Approx. 590 x 220 x 600 mm (23 7/32 x 8 21/32 x 23 5/8") (Excluding feet, protruding parts, and lens) (TBD)
Weight¹⁰	Approx. 38 kg (83.8 lbs) or less (TBD)

_{1. When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped.}
_{2. Maximum physical resolution is 3840 x 2400 pixels with Quad Pixel Drive [ON].}
_{3. The display frame rate corresponds to the input signal frame rate.}
_{4. Excluding lenses for the PT-RQ50K and D75 series lenses (excepting the ET-D75LE95).}
_{5. Preliminary specification for the US only. Full brightness requires AC 120 V or above. Operation at 100 V is supported but brightness may be reduced. Brightness may also be reduced depending on the operating environment, regardless of the supply voltage.}
_{6. Optional proprietary and third-party function boards are sold separately. Panasonic Projector & Display Corporation cannot guarantee the operation of third-party devices.}
_{7. Visual Software Suite for Windows® is available free from the PASS website. Some functionality described may require use with an optional ET-FMP50 Series media processor and a compatible camera (sold separately).}
_{8. Primary and backup terminal assignment is fixed. Input signals must be identical.}
_{9. When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.}
_{10. Average light-output value of all shipped products measured at the center of the screen in [NORMAL] Mode.}
_{11. Requires optional TY-SB01DL DIGITAL LINK Terminal Board. YPBPR 4:2:0 format only for 4K/60p signals input via DIGITAL LINK.}

Immersive Visual Expression for Diverse Environments

VIVID PRIME™ RGB laser technology supports the Rec. 2020 color gamut standard, delivering vividly expressive 20,000 lm¹ images that bring immersive attractions to the next level. With color brightness approaching 3-Chip DLP™ models, its proprietary RGB-plus-phosphor design maintains smooth gradations for Rec. 709 content and reduces rainbow effect. The projector delivers smooth 4K² visuals with Quad Pixel Drive technology and supports high-frame-rate 2K/240 Hz playback³. An enhanced Gradation Smoother can reduce tonal banding across six levels.

Flexible Installation with Flagship Features

The PT-HTQ20 brings 3-Chip DLP™-class features and flexibility to the 1-Chip category, with a compact size close to the PT-RQ25K and compatibility with Panasonic lenses for 3-Chip DLP™ projectors⁴. Full brightness is maintained on AC 120–240 V power⁵, broadening deployment options. In addition to a built-in 12G/3G/HD-SDI-compatible terminal, the projector features an Intel® SDM standard-compatible slot for optional function boards including the ET-SBFMP10 media processor⁶, and integrates with Visual Software Suite⁷ to automate complex adjustment workflows.

High Reliability for Demanding Applications

The dust-resistant optical engine, together with the advanced cooling system and filterless design, enhances long-term reliability while reducing maintenance requirements. A built-in mechanical shutter helps protect the DMD from stage lighting effects, while key PCBs feature a proprietary coating to improve resistance to dust and humidity in harsh conditions. Backup Input⁸ and Multi-Laser Drive Engine minimize interruptions during mission-critical presentations.

Specifications of PT-HTQ20

Specifications table

Projector type	1-Chip DLP™ RGB laser projector
Display method	DLP™ chip x 1, DLP™ projection system
Display Device -> Panel size	24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
Display Device -> Number of pixels	2,304,000 pixels (1920 x 1200 dots)
Light source	Laser diodes (Red LD, Green LD, Blue LD)
Light output^1^2	20,000 lm^*3 (TBD)
Light output (ANSI)^1^2	20,000 lm^*4 (TBD)
Light output (Center)^1^2	20,400 lm^*5 (TBD)

View specifications Download specifications

Accessories & Software

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEW600

0.924-1.28:1 Throw Ratio Zoom Lens for 3-Chip DLP Projectors

View product

Key Features
Deepens the immersive experience with top-to-bottom coverage projection image
Seamlessly covering wall surface
Large image reproduction from short distance

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LET30

2.4 - 4.7:1 throw ratio (WUXGA) Zoom Lens for 3-Chip DLP Projectors

View product

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEU101

Deliver Spectacular Images at Short Distance with New Zero-Offset Lenses

View product

Key Features
Minimize Throw Distance, Increase Flexibility
Wide-Range Adjustment After Projector Installation
Lens Design Delivers an Unobstructed View

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEW201

Deliver Spectacular Images at Short Distance with New Zero-Offset Lenses

View product

Key Features
Minimize Throw Distance, Increase Flexibility
Wide-Range Adjustment After Projector Installation
Lens Design Delivers an Unobstructed View

Showing 4 of 11

Brackets

ET-PKD520S

The Low ceiling mount bracket is designed for compatibility with PT-DZ21K2E, PT-DS20K2E, PT-DW17K2E, PT-DZ16K2, PT-RZ12K, PT-RQ13K projectors.

View product

Brackets

ET-PLF20

The Lens Fixing Kit is designed for compatibility with PT-RQ32K, PT-RZ31K, PT-RS30K series PT-RQ22K, PT-RZ21K, PT-RS20K series PT-RQ13K, PT-RZ12K, PT-RS11K series projectors and ET-D3LEU100 / ET-D3LEW200 lenses.

View product

Showing 2 of 2

Interface board/conversion cable

TY-SB01FB

The 12G-SDI Optical Function Board (TY-SB01FB) is compatible to be used with the PT-RQ7 Series projectors.

View product

Showing 1 of 1

Media Processor

ET-SBFMP10

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Media Processor

ET-FMP20

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Showing 2 of 2

Media Processor

ET-SBFMP10

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Media Processor

ET-FMP20

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Showing 2 of 2

EU Data Act Notice for data generated by our products

Connect with Panasonic Visual

Full specifications

Download specifications

Projector type	1-Chip DLP™ RGB laser projector
Display method	DLP™ chip x 1, DLP™ projection system
Display Device -> Panel size	24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
Display Device -> Number of pixels	2,304,000 pixels (1920 x 1200 dots)
Light source	Laser diodes (Red LD, Green LD, Blue LD)
Light output^1^2	20,000 lm^*3 (TBD)
Light output (ANSI)^1^2	20,000 lm^*4 (TBD)
Light output (Center)^1^2	20,400 lm^*5 (TBD)
Time until light output declines to 50 % -> NORMAL^*6	20,000 hours [NORMAL]
Time until light output declines to 50 % -> ECO^*6	24,000 hours [ECO]
Resolution	4K (3840 x 2400 dots) (Quad Pixel Drive: ON)
Contrast Ratio (typ.)^*3	25,000:1 (All white/All black, Dynamic Contrast [3]) (TBD)
Screen size (diagonal)	1.78–25.40 m (70–1000 in) (Depending on attached lens) (TBD)
Center-to-corner zone ratio^*3	90 % or above
Lens	Optional (No lens included with this model)
Lens shift -> Vertical(from center of screen)	±55 % (Max, depending on attached lens) (TBD)
Lens shift -> Horizontal(from center of screen)	±20 % (Max, depending on attached lens) (TBD)
Keystone correction range	Vertical: ±55 % (Max, depending on attached lens) (TBD) Horizontal: ±20 % (Max, depending on attached lens) (TBD)
Installation	Ceiling/floor, front/rear, free 360-degree installation
Terminals -> SDI IN	12G/3G/HD-SDI signal compatible
Terminals -> HDMI^™ IN	HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)
Terminals -> MULTI PROJECTOR SYNC IN	BNC x 1, TTL high impedance
Terminals -> MULTI PROJECTOR SYNC OUT	BNC x 1, TTL output: Maximum 10 mA
Terminals -> SERIAL IN	D-sub 9-pin (Female) x 1 for external control (RS-232C compliant)
Terminals -> REMOTE 1 IN	M3 stereo mini-jack x 1 for wired remote control
Terminals -> REMOTE 1 OUT	M3 stereo mini-jack x 1 for link control (For wired remote control)
Terminals -> LAN	RJ-45 x 1 for network connection, PJLink^TM (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals -> DC OUT	USB connector Type A x 1 for connecting optional AJ-WM50 Series Wireless Module/USB memory or for power supply (DC 5 V, 2 A)
Terminals -> SLOT	Slot x 1, open slot, for function boards, Intel^® SDM standard-compatible
Protocol versions	IPv4, IPv6^*7
Power supply	Single-phase AC 100–120 V / Single-phase AC 200–240 V, 50/60 Hz
Maximum power consumption^*8	TBD
On-mode power consumption(Operating mode) -> Normal^8^9	TBD
On-mode power consumption(Operating mode) -> Eco^9^10	TBD
Cabinet materials	Molded plastic, processed metal parts
Operation noise -> Normal^*3	TBD
Operation noise -> Eco^*3	TBD
Operation noise -> Quiet^*3	TBD
Dimensions (W x H x D)	Approx. 590 x 220 x 600 mm (23 7/32˝ x 8 21/32˝ x 23 5/8˝ ) (Excluding feet, protruding parts, and lens) (TBD)
Weight [kg]^*10	Approx. 38 kg (83.8 lbs) or less (TBD)
Operating environment -> Operating temperature^*12	0–45 °C (32–113 °F)^*11(TBD)
Operating Environment -> Operating humidity (No condensation)	10–80 % (No condensation)(TBD）
Applicable software	Multi Monitoring and Control Software for Windows^®, Visual Software Suite for Windows^®, Projector Network Setup Software for Windows^®,Smart Projector Control for iOS/Android^TM
Control function via LAN	Crestron Connected^TM V2, Crestron XiO Cloud^TM, Art-Net, AMX^® DD, Extron^® XTP12, and PJLink^TM (Class 2)
Footnote Description	This is the value when the Zoom Lens (Model No.: ET-D3LES250) is used. The value varies depending on the lens. When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped. Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped. Average light-output value of all shipped products measured at the center of screen in NORMAL Mode. Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE] set to [DYNAMIC], [DYNAMIC CONTRAST] set to [3]). Estimated time until light output declines to 50 % varies depending on environment. Optional AJ-WM50 Series Wireless Module is not compatible with IPv6. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft). Average value. May differ depending on the actual unit. The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft) above sea level. Note that altitude of 4,200 m (13,780 ft) above sea level is the maximum height that the performance of this projector is guaranteed. When using the projector at an altitudelower than 1,400 m (4,593 ft) above sea level, and the operating environment temperature becomes 35 °C (95 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 1,400 m(4,593 ft) and 2,700 m (8,858 ft), and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector (TBD). Do not use the projector in a location where the ambient temperature exceeds40 °C (104 °F) regardless of the altitude when the optional AJ-WM50 Series Wireless Module is attached to the projector. Only when optional TY-SB01DL DIGITAL LINK Terminal Board is loaded.

1-Chip DLPTM RGB Laser Projector

PT-HTQ20

Key features of PT-HTQ20

Key features

Immersive Visual Expression for Diverse Environments

Flexible Installation with Flagship Features

High Reliability for Demanding Applications

Specifications of PT-HTQ20

Specifications table

Accessories & Software

ET-D3LEW600

ET-D3LET30

ET-D3LEU101

ET-D3LEW201

ET-PKD520S

ET-PLF20

TY-SB01FB

ET-SBFMP10

ET-FMP20

ET-SBFMP10

ET-FMP20

Related resources

Connect with Panasonic Visual