50,000 lumen 4K+ Solid Shine Laser Projector and 3-Chip DLP Technology.
PT-RQ50K
World’s most compact 50,000 lumen Laser Projector with Native 4K Resolution...
Key features
| Laser 3-chip DLP, 50,000 lumens, Native 4K. |
| Lamp-free laser projection with hermetically sealed optics and filter-less design, for 20,000 hours maintenance free operation |
| Compact body allows for simplified transport, install and adjustment |
| Dualised design provides the ultimate in backup and reliability... |
| 20,000:1 contrast ratio... |
The world’s smallest 50klm native 4K projector
The PT-RQ50K is an all-in-one projector built to create breath-taking experiences with ease and reassurance. It combines Panasonic’s finest image quality and long-proven reliability.
| PT-RQ50 | |
|---|---|
| Brightness | 51 000 center lumen / 50 000 lumen |
| Resolution | Native 4K |
| Contrast | 20 000:1 |
Awe-Inspiring Color, Brightness, and Resolution
The PT-RQ50K represents a milestone in projection technology. Serving flawless Native 4K (4096 x 2160) images with a laser engine that combines one red laser and two blue lasers operating at different wavelengths, light output is doubled from the same footprint as our 26,000 lm PT-RQ32K 4K projector. Deployed at sporting events, arena concerts, outdoor mapping attractions, or museum exhibitions, the PT-RQ50K’s refined power will exceed the highest expectations.
Newly Developed Laser Engine Expands the Color Gamu
An all-new laser engine expands color-gamut to 114 % of our current PT-RQ32K flagship, achieving lush, vibrant hues that pull audiences into the artist’s world. A new red laser enhances two blue lasers, which output light at different wavelengths for high color accuracy. Combined with digital frame-by-frame control to manage light output according to the scene’s contrast and brightness requirements and dedicated red-laser cooling to precisely control temperature, the PT-RQ50K attains vivid reds and deep, natural blues for spectacular on-screen color expression.
Gradation Smoother Reduces Banding
Panasonic’s original Gradation Smoother function reduces banding noise in gradients of shaded color evident in content that lacks the optimal color bit-depth. Operators can select three levels* of image correction appropriate to the severity of the problem, or disable the function when it’s not needed. Gradation Smoother is your go-to solution when banding is evident in the projection, but there’s no time to re-edit the content.
Remote Preview Saves Time and Unnecessary Stress
Newly introduced within Multi Monitoring & Control Software and also accessible via web browser, Remote Preview allows projectionists to check the content being received by the projector via a Wi-Fi®- or LAN-connected laptop. It works with the projector in Standby, with the shutter on, or when direct sunlight makes inspecting on-screen images difficult. It gives a chance to fix errors between the source and projector before setup is completed.
Built-in Upgrade Kits for Geo Pro Software Now Preactivated
With the PT-RQ50K, upgrade features for Geometry Manager Pro are built into the software and do not require paid activation. Simply download and install Geo Pro to a PC to simplify advanced multi-screen geometric adjustments. Built-in capabilities include uniformity correction and Auto Screen Adjustment for automatic and simultaneous calibration of multiple screens (including curved-screen correction) using a compatible camera. These features expedite edge-blending and color-matching in mapping applications with automatic calibration for black level, brightness uniformity, and stacking.
Geometric Adjustment with Free Grid Correction via Remote Control
Free Grid is a function in Geometric Adjustment that enables convenient grid-based image adjustment using the projector’s remote controller. Grid resolutions of 2 x 2, 3 x 3, 5 x 5, 9 x 9, or 17 x 17 can be projected and areas of the image reshaped or geometrically altered to compensate for screen distortions. This correction is easily performed by adjusting control points located at grid-line intersections. Move freely between grid resolutions to achieve the desired level of granularity without losing work progress. This clever data-saving function allows technicians to smoothly create a distortion-free projection in a wide range of installation situations.
Smart Projector Control App
Smart Projector Control is a remote app for iOS and Android™ devices*1 that can adjust and control up to 64 projectors individually or simultaneously from anywhere within range of the wireless network. Use the app to connect the projector to the wireless network*2 without manually entering SSID and password simply by scanning a QR Code displayed on the projector’s Information Monitor. Once connected, you can switch the unit on or off, select an input signal, and adjust the projector’s OSD menu settings via your device’s touchscreen with the unit in standby. Installers avoid delays when it’s not possible to project the OSD menu, and can set up a fleet of projectors while other event infrastructure is assembled. As well as OSD menu operations, the app can adjust lens settings and select test patterns and lets you focus the projection using your phone camera*3 from distances of up to 30 m*4 (98 ft) away. For more information, visit the Smart Projector Control website.
NFC Function
PT-RQ50K projectors can be paired with your smartphone via NFC* (Near Field Communication) when the projector is off and disconnected from AC power by touching the device against the projector’s NFC touchpoint. Adjust selected projector settings using Smart Projector Control app, such as Projector ID and IP address, while waiting for power to be connected and setup to begin. Fleets of projectors can be prepped for immediate network connection and setup the moment power rolls out on the installation site, saving time and resources. After the event, projectors can be reset to factory defaults while unplugged and ready for crating, an action that used to require OSD menu projection.
New Information Monitor
To further simplify setup and operation of the PT-RQ50K, an Information Monitor is located on the side panel adjacent to terminals and physical controls. The monitor provides menu-based navigation for smooth setup of Projector ID and basic network configuration. It also shows projector status including temperature, runtime, and active signal data, as well as error codes should a problem be detected.
Dedicated Lenses Cover All Throw-Ratios
An exclusive new lineup of optional lenses for the PT-RQ50K provides throw-ratio coverage from 0.55:1 to 7.76:1, adapting projections to suit the installation site. All seven models support powered zoom, lens-shift, as well as lens memory and lens ID for easier on-site adjustments. AFO (Active Focus Optimizer) feature optimizes focus based on content APL, keeping images sharp and in focus.
Reliable Red-Laser Performance for Intense Color
Red lasers demonstrably heighten color expression. However, implementation of the technology has been a challenge due to the laser’s sensitivity to temperature fluctuation. Panasonic innovates a highly stable red-laser drive that digitally controls light output within precise parameters frame-by-frame using Dynamic Digital Control and an independent cooling system. The additional red laser is key to the PT-RQ50K’s vivid red reproduction and a superior RGB balance.
Shielded Laser Drive with Finless Radiator
Hermetically sealed DMD block, shielded laser drive, and filterless cooling system is reinforced by a new finless radiator that improves cooling efficiency by as much as 30 % over previous implementations while protecting critical components from dust intrusion. The projector exceeds common international dustproofing guidelines and is manufactured in Japan to extremely rigorous quality control standards. Business operators can expect up to 20,000 hours* of reliable maintenance-free projection at full brightness.
Solid-State Laser Modules with Failover Circuitry
The SOLID SHINE Laser drive groups laser diodes into discrete modules. In the unlikely event one single diode in a module goes out, Failover Circuitry enables the diodes in the affected series to be bypassed—the remaining, functional diodes continue to operate with imperceptible loss in brightness. If a laser diode fails in other laser projectors, the whole module goes down and the brightness loss is so great that the projector must be taken offline. Panasonic laser diode failover technology adds yet another layer of insurance for events projection when image presentation must be maintained.
Backup Input Guarantees Picture Display
If the primary signal is disrupted, the projector switches to a backup input in just 0.3 seconds at the fastest, so image display is maintained when projection mustn’t be interrupted. No screen-blanking occurs during backup input-switching.
Additional Features
- Quick Start and Quick Off
- Laser Safety Guaranteed
- Multi-screen Support System
- Multi-Unit Brightness and Color Control
- Data-cloning Function
- Art-Net DMX, Crestron Connected™, and PJLink™
- DICOM Simulation Mode
- Waveform Monitor Function
- Power Management Reduces Downtime
Specifications table
| Projector type | 3-Chip DLP™ projector |
|---|---|
| DLP™ Chip | Panel Size | 35.1 mm (1.38 in) diagonal (17:9 aspect ratio) |
| DLP™ Chip | Display Method | DLP™ chip x 3, DLP™ projection system |
| DLP™ chip | Number of Pixels | 8,847,360 (4096 x 2160) pixels x 3 |
| Light Source | Laser diodes (Blue LD, Red LD) |
| Light output | 50,000 lm*1 / 51,000 lm (Center)*2 |
| Time until light output declines to 50 %*3 | 20,000 hours (NORMAL) |
| Lens | New optional lenses for PT-RQ50K (no lens included with this model) |
| Weight*4 | Approx. 126 kg (278 lbs) (without lens) |
Accessories & Software
Lenses for 3-Chip DLP > 35.000 lumens
ET-D3QS400
1.4-2.1:1 Throw Ratio 3-Chip DLP™ Zoom Lens for PT-RQ50 projector with Lens Memory and Stepping Motor
Lenses for 3-Chip DLP > 35.000 lumens
ET-D3QT500
2.0-3.4:1 Throw Ratio 3-Chip DLP™ Zoom Lens for PT-RQ50 projector with Lens Memory and Stepping Motor
Lenses for 3-Chip DLP > 35.000 lumens
ET-D3QT600
2.69~3.88:1 throw ratio (Aspect 17:9) Zoom Lens for the PT-RQ50K
Lenses for 3-Chip DLP > 35.000 lumens
ET-D3QT700
3.9-5.5:1 Throw Ratio 3-Chip DLP™ Zoom Lens for PT-RQ50 projector with Lens Memory and Stepping Motor
Showing 4 of 7
Digital Interface Box
ET-YFB100G
By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.
Showing 1 of 1
Digital Interface Box
ET-YFB100G
By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.
Showing 1 of 1
DIGITAL LINK Switcher
ET-YFB200G
2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.
Showing 1 of 1
DIGITAL LINK Switcher
ET-YFB200G
2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.
Showing 1 of 1
Interface board/conversion cable
ET-MDNDV10
DVI-D input signal board
Interface board/conversion cable
ET-MDN12G10
12G-SDI signal board
Interface board/conversion cable
ET-MDNFB10
ET-MDNFB10
Showing 3 of 3
Lenses for 3-Chip DLP < 35.000 lumens
ET-D75MC1
Lens motor cover for 3-DLP projectors
Showing 1 of 1
Frames
ET-RFD80
The Rental Frame is designed for compatibility with PT-RQ50 projector.
Showing 1 of 1
Software
Multi Monitoring and Control Software
Remote control, monitoring, and live status reporting about your projectors and displays fleet from an intranet.
Showing 1 of 1
Related resources
Showing 12 of 27
Sorry there was an error...
The files you selected could not be downloaded as they do not exist.
You selected items.
Continue to select additional items or download selected items together as a zip file.
You selected 1 item.
Continue to select additional items or download the selected item directly.
Share page
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: