Closing the automation gap in manual assembly manufacturing
Many people unfamiliar to the world of electronics manufacturing are often surprised by the number of manual assembly processes that are still involved. The challenge of placing larger or odd-shaped components on a Printed Circuit Board (PCB) still requires human assistance.
Written by
Reinhard Windemuth
General Manager for Special Products
Many people unfamiliar to the world of electronics manufacturing are often surprised by the number of manual assembly processes that are still involved. The challenge of placing larger or odd-shaped components on a Printed Circuit Board (PCB) still requires human assistance. For every 4 automated Surface Mount Technology (SMT) production lines there might be 2 manual assembly areas for THT assembly behind it. Those may be limited to THT component insertion. But there may be some additional screwing, gluing, visual inspection steps and / or final product packing steps that are still handled manually. This requirement for manual labour is one of the last automation gaps remaining in the production process of Electronic Manufacturing and a challenge for any manufacturers.
The manual process means it is more exposed to human error and lacks the real-time data information feedback and traceability of automated production. That’s where the Panasonic Guided Manual Assembly (PGMA) solution comes in. PGMA is a reliable and effective manual Through Hole Technology mounting manufacturing solution. A computer-assisted manual workstation developed with our partner Computer Aided Works that uses software to provide specific work-instructions for manual assembly. With the support of PGMA, traceability as well as a reduction of error rates in manual manufacturing and effective, end-to-end material management all becomes possible.
So, how does PGMA work?
The PGMA system consists of a computer with interface to the MES and/or ERP software and database. There is a material assembly area including a conveyor if needed, the picking material boxes and a barcode reader, a Panasonic laser projector for visualisation onto the PCB and the working area. It also includes a high resolution camera with high intensity lighting for image recognition and 2 monitors for work instructions and local reporting.
Automated guidance
When some of the assembly, inspection and packing steps are still manual, this computer-aided manual workstation comes into its own. Each worker registers onto the system, for example by scanning their employee pass. The instructions for placing components on the board are then shown visually in sequence. Lights show which component to pick, and placement instructions are projected onto the board. If components are placed incorrectly, an error is indicted by a red light and an acoustic signal (beep). Each process step can also be supported by images and photos and detailed work instructions and/or drawings on the display. This can be as detailed as required to enable less experienced workers to deliver failure-free working from the beginning.
30 % reduced process cycles
With this effective automated guidance system and the removal of a requirement for manual confirmations, production process cycle times can be reduced by as much as 30%. There is also anecdotal evidence that points to a boost in motivation and productivity for the workforce as they become more confident in the system and reduce the number of errors they make.
All the work processes can be easily programmed into the system by the customer. Because the PGMA is collecting real-time data, it can be integrated into ERP systems in the same way as automated production data, improving material management and traceability.
Return on investment
With the PGMA system showing typical return on investment of less than one year, based on customer data and verified simulations, there has never been a better time to decide to close that automation gap on your manual assembly areas.
Read more insights…
blog
Innovations in Sheet Metal Working Technology: That was EuroBLECH 2024
The EuroBLECH 2024 fair, held in Hannover, Germany, once again established itself as the premier event for the sheet metal working industry. As the world's largest exhibition in this sector, EuroBLECH brought together industry leaders, innovators, and professionals from around the globe to showcase cutting-edge technology, exchange ideas, and discuss the future of sheet metal working.
blog
Connect2Customer Days: Showcasing how Customers are benefiting from the Autonomous Factory Concept
Introduced at last year’s Productronica, Panasonic’s own Autonomous Factory Concept has continuously evolved. One year after it’s official market introduction it is now a good time for a reflection – and for collecting feedback from the field as well as for discussions with partners and customers on the future technology roadmap of the concept.
Case Study
Paving the way for digitalization of the damper shopfloor
Increasing speed, flexibility and operator-friendliness of a thyssenkrupp Bilstein production line via retrofit upgrade to the new Panasonic TAWERS G4 Welding Robot System.
blog
Unmasking the Truth: Debunking the Biggest Myths in Electronics Manufacturing
Within every industry, rumours and myths are a common thing. But how do we know what’s real? Let’s clean up with some of the biggest myths within the electronics manufacturing industry!
Sorry there was an error...
The files you selected could not be downloaded as they do not exist.
You selected items.
Continue to select additional items or download selected items together as a zip file.
You selected 1 item.
Continue to select additional items or download the selected item directly.
Share page
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: