PT-DZ13K

Discontinued

3DLP - 12000 lumens - WUXGA - 2Lamps - Exchangeable lens - 3D / HD-SDI / Lens Memory - Edge Blending /Geo Adjustment

Key features

3-chip DLP, 12000 lumens, WUXGA
High brightness and high contrast ratio make bright, crisp and sharp image
Dual lamp system with Lamp Relay mode enables 24/7 operation
10,000:1 contrast ratio
Edge blending function and colour matching
  • High brightness and High contrast ratio of 10,000:1 makes bright, crisp and sharp image
  • Dual Lamp System with Lamp Relay mode enables 24/7 operation
  • Eco Filter enables up to 12,000 hours of Air filter replacement cycle.
  • 12,000 lumens brightness
  • WUXGA (1,920 x 1,200) resolution
  • 10,000:1 contrast ratio
  • New Geometric Adjustment function(+Upgrade kit)
  • Edge Blending Function and Color Matching
  • Portrait mode compatibility
  • HD-SDI Input
  • Wired LAN
  • 3D ready
     

Our innovative dual-lamp system, with its new lamp, helps to make this body compact while providing a full 12,000lm of brightness, with 220-240V AC operation. When in ‘Lamp Relay’ mode, the system also eliminates any interruptions if a lamp should fail and enables 24/7 projection.

The projector’s Dynamic Iris feature uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1 contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures.

An integrated Eco Filter combines with the dust-resistant cabinet to allow long-term use in harsh conditions, while a maintenance cycle of up to 12,000 hours reduces the time and cost of repair.

The wide adjustment range of the powered horizontal/vertical lens shift function can be easily adjusted with the remote control. The unit can also be rotated 360° vertically, to accommodate various installation conditions. The lens-centred design contributes to easy installation.

Specifications table

Power Supply120 V AC, 9.3 A, 50/60 Hz; 220-240 V AC, 5 A, 50/60 Hz
Power Consumption (120V AC, 50/60Hz)1,000 W (1,030 VA) (0.2 W with standby mode set to eco. 6 W with standby mode set to normal. Both with fan stopped.)
Power Consumption (220-240V AC, 50/60Hz)970 W (1,020 VA) (0.3 W with standby mode set to eco. 9 W with standby mode set to normal. Both with fan stopped.)
DLP™ Chip Panel Size24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
DLP™ Display MethodDLP™ chip x 3, DLP™ projection system
DLP™ Pixels2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
LensOptional powered zoom/focus lenses
Lamp380 W UHM lamps (x 2) (dual lamp, high mode)

Product series

PT-DZ13K series

PT-DZ13K series
 
Model
Lens test
Optional powered zoom/focus lenses
Projector Type
380 W UHM lamps (x 2) (dual lamp, high mode)
DLP™ Chip | Panel Size
24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
DLP™ Chip | Display Method
DLP™ chip x 3, DLP™ projection system
DLP™ chip | Number of Pixels
2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
Brightness
12,000 lumens (dual lamp, high mode)
Resolution
1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)
Contrast Ratio
10,000:1 (full on/full off, in dynamic iris 3 mode)
Screen Size
1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:10 aspect ratio
Lens
Optional powered zoom/focus lenses
Installation
Ceiling/floor, front/rear
Terminals | HDMI In
HDMI 19-pin x 1, Deep Color, compatible with HDCP; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz-162 MHz; NOTE: Compatible with non-interlaced signals only.
Terminals | DVI-D In
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz-162 MHz; NOTE: Compatible with non-interlaced signals only.
Terminals | RGB 1 In
BNC x 5
Terminals | RGB 1 In | R, G, B
R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 2 In
D-sub HD 15-pin (female) x 1
Terminals | RGB 2 In | R, G, B
R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | 3D Sync 1 In/Out
BNC x 1, 1.0 Vp-p, 75 ohms; Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals | 3D Sync 2 Out
BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals | Serial In
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | Serial Out
D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals | Remote 1 In
M3 jack x 1 for wired remote control
Terminals | Remote 1 Out
M3 jack x 1 for link control
Terminals | Remote 2 In
D-sub 9-pin x 1 for external control (parallel)
Terminals | LAN
RJ-45 x 1 for network connection, 100Base-TX/10Base-T, compliant with PJLink™ (class 1)
Power Supply
120 V AC, 9.3 A, 50/60 Hz; 220-240 V AC, 5 A, 50/60 Hz
Cabinet Materials
Molded plastic
Operating Temperature
0℃ - 45℃ (32℉ - 113℉)
Dimensions
530 x 200 x 548.5 mm (20-7/8 x 7-7/8 x 21-19/32 inches) (without lens)
Weight
24 kg (52.9 lbs) (without lens)

Accessories & Software

Lenses for 3-Chip DLP < 35.000 lumens

ET-D75MC1

Lens motor cover for 3-DLP projectors

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEF70

Fisheye lens for 3-Chip DLP projectors perfect for dome and planetarium projection

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEW50

0.7:1 throw ratio (WUXGA) Fixed-focus Lens for 3-Chip DLP Projectors

Showing 3 of 3

Lamps

ET-LAD310A

380 W UHM lamp x 1

Lamps

ET-LAD320P

380 W UHM lamp x 1, For portait mode

Lamps

ET-LAD310AW

380 W UHM lamp x 2

Lamps

ET-LAD320PW

380 W UHM lamp x 2, For portrait mode

Showing 4 of 4

Brackets

ET-PKD120H

High ceiling mount bracket

Brackets

ET-PKD120S

Low ceiling mount bracket

Showing 2 of 2

Filters

ET-EMF320

Eco filter

Filters

ET-SFD320

Smoke cut filter

Filters

ET-SFR320

Replacement smoke cut filter, for the ET-SFD320

Showing 3 of 3

Geometry Manager Pro

ET-UK20

Geometric adjustment option for 3D mapping and complex projection adjustments.

Showing 1 of 1

Autoscreen Adjustment

ET-CUK10_CUK10P

Expends Geometry Manager Pro software allowing automatic adjustment of multi-screen or curved-screen projections.

Showing 1 of 1

Software

Multi Monitoring and Control Software

Remote control, monitoring, and live status reporting about your projectors and displays fleet from an intranet.

Showing 1 of 1

Frames

ET-RFD40

The rental frames are sturdy, strong and visually appealing. In addition, they offer a horizontal and vertical adjustment feature for the ideal projector position. 

Showing 1 of 1

Related resources

Showing 4 of 38

Showing 4 of 17

Showing 4 of 10