The NPM-DX provides a greater line throughput, better quality and lower production cost featuring an autonomous line control, which guaranties a stable operation based on automatic functionality. This functionality in combination with the machine set up offers a labor-saving production with improved utilization.
In combination with the Panasonic software environment and embedded into an Industry 4.0 philosophy, the user can expect a modern shop floor management system including various remote operation options, feeder setup navigation, component supply navigation etc.
In total, the NPM-DX reduces downtimes and increase the line throughput.
With 92 400 cph and a feeder capacity for up to 136 reels, the NPM-DX is the ideal solution to meet the expectation of an evolving electronics assembly industry.
The NPM-DX can process PCB sizes of up to 510 x 590 mm and place large connectors (up to 150 x 25mm) and other components (up to 120 x 90mm).
This and other features make the NPM-DX the best solution for high volume-mix manufacturing.
|92 400 cph and feeding with up to 136 reels|
|Ready for line automatization|
|Available APC system|
|Integrated floor management|
|Lowest total cost of ownership (TCO) with maintenance services|
|PCB dimensions (mm)||Single-lane mode: L 50 × W 50 ~ L 510 × W 590 Dual-lane mode: L 50 × W 50 ~ L 510 × W 300 *When the long spec. conveyor is selected|
|PCB exchange||2.1 s ( L 275 mm or less); 4.8 s ( L 275 mm or over to L 460 mm or less) *May differ depending on PCB specifications. *When the short spec. conveyor is selected|
|Electric Source||3-phase AC 200, 220, 380, 400, 420, 480 V 5.0 kVA|
|Pneumatic Source||Min.0.5 MPa、200 L /min (A.N.R.)|
|Placement Head max Speed||Lightweight 16-nozzle head V2 (Per head): 46 200 cph (0.078 s/ chip) Lightweight 8-nozzle head (Per head): 24 000 cph (0.150 s/ chip) 4-nozzle head (Per head): 8 500 cph (0.424 s/ chip) 8 000 cph (0.450 s/ QFP)|
|Placement Head Placement Accuracy (Cpk≧1)||Lightweight 16-nozzle head V2 (Per head): ±25 μm/Square chip Lightweight 8-nozzle head (Per head): ±25 μm/ Square chip; ±40 μm/QFP □12 mm Under; ±25 μm/QFP □12 mm to □32 mm 4-nozzle head (Per head): ±20 μm/ QFP|
|Placement Head Component Dimensions (mm)||Lightweight 16-nozzle head V2 (Per head): 0201 component / 03015 component; 0402 component to L 6 x W 6 x T 3 Lightweight 8-nozzle head (Per head): 0402 component ~L 45 x W 45 or L 100 x W 40 x T 12 4-nozzle head (Per head): 0603 chip ~ L 120 x W 90 or L 150 x W 25 x T 30|