PT-MZ20 Series

Backup Input* Function for Enhanced Reliability

Backup Input* function enables seamless projection even if the input signal is disrupted. With HDMI 1 set as the primary input and HDMI 2 set as the secondary input, the projector switches to HDMI 2 in as little as 0.3 seconds² if the signal to HDMI 1 is disrupted. This improves reliability and ensures stable operation in environments where video presentation must not be interrupted.

^{* Primary Input (HDMI 1) and Secondary Input (HDMI 2) terminal assignment is fixed. Input signals to primary and secondary inputs must be identical.
2 Varies depending on the Backup Input mode and the connected external device.}

Information Monitor for Changing Settings and Checking Status

Information Monitor is located on the main unit’s control panel and displays information such as temperature, voltage, operating hours, and input signals in real time. If a projector error occurs, the error number and associated details are immediately reported. The status of the main unit can be easily checked, and quick recovery from trouble is made possible.

Geometric Adjustment Corrects Trapezoidal Distortion and Curved Screens

With built-in Geometric Adjustment, various distortions on the screen can be corrected via remote control. In addition to trapezoidal distortion resulting from angled projection, Curved Screen Correction fixes distortion caused by projection onto curved surfaces. Corner Correction allows the user to specify four screen corners, such as the upper right and lower right, for correction. Screen proportions can be maintained and corrections can be saved as data.

Free Grid Enables Pinpoint Correction of Local Distortion

In addition to built-in Geometric Adjustment function, Free Grid allows pinpoint correction of local distortion within the screen. Grids between 2 x 2 and 17 x 17 lines can be selected to allow point-by-point correction, or batch correction by specifying vertical and horizontal lines. Correction data is maintained even after changing the number of grids or points, allowing smooth transition from basic to detailed correction. This convenient function allows adjustment of special screens, such as irregular or uneven wall surfaces, with the remote control.

Black Level Correction to Match Screen Shape

With conventional black level correction, only the width and angle of the black border are specified for correction, making edge-blending on curved screens difficult. To solve this problem, PT-MZ20K Series is equipped with a function that allows the shape of black borders to be adjusted to match the screen shape. Using up to 17 points, flexible black level correction is possible even on curved screens, enhancing the sense of cohesion in multi-screen applications.

Remote Preview LITE* for Remote Confirmation of Images

With Remote Preview LITE*, you can check input images in advance even when it’s not possible to project content, such as outdoors during the daytime or during performance rehearsals. When your PC and the projector are connected to the network, you can use a web browser or Multi Monitoring & Control Software to display thumbnail images of the input video. Check content even when the shutter is in use or the projector is in Standby² to quickly identify any problems between the source device and the projector for faster recovery.

^{1 Requires Multi-Monitoring & Control Software Version 3.3 or later available free here. For more information, click here.
2 Projector must be set to Pre-Show Mode.}

Lens Lineup is Compatible with AFO* (Active Focus Optimizer)

A variety of optional lenses (eight models² in total) are available to support a range of screen sizes between 80 and 600 inches, allowing you to select the optimal lens for your projection needs. These lenses are equipped with a temperature sensor and automatically correct focus in conjunction with the projector’s AFO² function. This technology maintains a sharp image regardless of the brightness of the content, eliminating need for manual focus adjustment. Of course, powered lens-shift and zoom adjustment is also supported via remote control or Smart Projector Control app³.

^{*Specifications vary depending on the lens. Please refer to the Operating Manual for details.
2 PT-MZ17KL/MZ14KL/MZ11KL are also compatible with previously released ET-EMS600/EMT700/EMT800 lenses.
3 Check device compatibility at the App Store or the Google Play store.}
 

Compatible with Ultra-Short-Throw Zoom Lens for Space-Saving Installation

ET-EMU100 Ultra-Short-Throw Zoom Lens has a throw ratio of 0.330–0.353:1 and a screen size range of 100–400 inches, and enables large-screen projection even from tight installation spaces. With no gap (offset area) between the ceiling and the screen, ET-EMU100 eliminates need for adjustment and expands the range of visual expression by supporting the zoom function despite its ultra-short focus.

Detail Clarity Processor 4 Improves Dimensionality and Sharpness

Panasonic Connect’s unique image quality correction circuitry reproduces details more clearly and sharply. It analyzes video signal frequencies in each scene and adjusts for optimal sharpness based on information extracted from the signal. Compared to conventional image processing technology, this system reproduces images with an even more natural and three-dimensional feel.

Supports 4K Signal Input*

Uncompressed 4K/60p input signals* are supported via HDMI^® or DIGITAL LINK. Since no external devices such as converters are required, 4K signals can be processed smoothly. This eliminates the need for re-encoding when the projector is used with other 4K-compatible equipment, making projection with 4K signals simple and efficient.

^{*Input signals are converted to the projector’s display resolution upon playback. 4K/60p signals are supported via HDMI and DIGITAL LINK terminals. 4K/60p and 4K/50p signals input via DIGITAL LINK are supported in YP_BP_R 4:2:0 format only.}