Full specifications
| Projector type | 1-Chip DLPTM projector |
|---|---|
| Display method | DLPTM chip x 1, DLPTM projection system |
| Display Device -> Panel size | 17.0 mm (0.67 in) diagonal, 16:10 aspect ratio |
| Display Device -> Number of pixels | 2,304,000 (1920 x 1200) pixels |
| Light source | Laser diodes |
| Light output *1 *2 *3 | 8,000 lm |
| Light output (ANSI) *4 | 8,000 lm |
| Light output (Center) *5 | 8,400 lm (Center) |
| Time until light output declines to 50 % -> NORMAL *6 | 20,000 hours [NORMAL] |
| Time until light output declines to 50 % -> ECO *6 | 24,000 hours [ECO] |
| Resolution | 4,608,000 pixels / 2715 x 1697 dots (Smooth Pixel Drive: ON) |
| Contrast Ratio (typ.) *3 | 10,000:1 (Full On/Full Off)（Dynamic Contrast set to [3]） |
| Screen size (diagonal) | 1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio |
| Center-to-corner zone ratio *3 | 0.9 |
| Lens | PT-RCQ10: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm PT-RCQ10L: Optional powered zoom/focus lenses |
| Lens shift -> Vertical(from center of screen) | +50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered) |
| Lens shift -> Horizontal(from center of screen) | +30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered) |
| Keystone correction range | Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035),Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020) |
| Keystone correction range with optionalET-UK20 Upgrade Kit | Vertical: ±45 ° (±16 ° with ET-DLE060, ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055),Horizontal: ±40 ° (±10 ° with ET-DLE060, ±15 ° with ET-DLE105/ET-DLE085/ET-DLE055),When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
| Installation | Ceiling/floor, front/rear, free 360-degree installation |
| Terminals -> SDI IN | BNC x 1 : 3G/HD-SDI input |
| Terminals -> HDMI™ IN | HDMITM 19-pin x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input*5) |
| Terminals -> DVI-D IN | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
| Terminals -> MULTI PROJECTOR SYNC IN | BNC x 1 |
| Terminals -> MULTI PROJECTOR SYNC OUT | BNC x 1 |
| Terminals -> SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals -> SERIAL OUT | D-sub 9-pin (male) x 1 for link control |
| Terminals -> REMOTE 1 IN | M3 x 1 for wired remote control |
| Terminals -> REMOTE 1 OUT | M3 x 1 for link control (for wired remote control) |
| Terminals -> REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) |
| Terminals -> DIGITAL LINK IN / LAN | RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseTTM compliant), 100Base-TX, compatible with Art-Net, PJLinkTM (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5 |
| Terminals -> LAN | RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant with PJLinkTM (Class 2), Art-Net |
| Terminals -> USB TYPE A | USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA) |
| Terminals -> SLOT | Open slot for SLOT NX compatible interface board |
| Power supply | AC 100–240 V, 50/60 Hz |
| Maximum power consumption *9 | 880 W (890 VA) |
| On-mode power consumption(Operating mode) -> Normal *9 | [NORMAL] 770 W |
| On-mode power consumption(Operating mode) -> Eco *9 | [ECO] 590 W |
| Standby power consumption -> Normal | 8 W （Standby Mode）［NORMAL］ |
| Standby power consumption -> ECO | 0.5 W （Standby Mode）［ECO］ |
| Cabinet materials | Molded plastic |
| Filter | No |
| Operation noise -> Normal *3 | 40 dB [NORMAL] |
| Operation noise -> Quiet *3 | 38 dB [QUIET] |
| Dimensions (W x H x D) | PT-RCQ80: 498 x 200*6 x 581 mm (19 19/32˝ x 7 7/8˝ *6 x 22 7/8˝ ) (with supplied lens)PT-RCQ80L: 498 x 200*6 x 538 mm (19 19/32˝ x 7 7/8˝ *6 x 21 3/16˝ ) (without lens) |
| Dimensions -> Width (including protruding parts) | PT-RCQ10:498 mm (19 19/32˝)PT-RCQ10L:498 mm (19 19/32˝) |
| Dimensions -> Height (including protruding parts) | PT-RCQ80:200 mm (7 7/8˝)PT-RCQ80L:200 mm (7 7/8˝) |
| Dimensions -> Depth (not including protruding parts) | PT-RCQ80L:538 mm (21 3/16˝) |
| Dimensions -> Depth (including lens) | PT-RCQ80:581 mm (22 7/8˝) |
| Weight [kg] *10 | PT-RCQ80: Approx. 24.2 kg (53.4 lbs) (with supplied lens)PT-RCQ80L: Approx. 23.4 kg (51.6 lbs) (without lens) |
| Operating environment -> Operating temperature *11 | 0–45 °C (32–113 °F) |
| Operating Environment -> Operating humidity (No condensation) | 10–80 % (no condensation) |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/AndroidTM |
| Footnote Description |
|
Explore our all-inclusive Partner Success Tools built in the Connect Partner Portal. Our Partner Success team is there to support your business growth. Access all needed resources and use available marketing resources to generate leads, register your opportunities, learn about exciting new assets and more . . .
Once logged in, you’ll gain access on our webpage to enhanced features and exclusive downloads available only to our registered partners.
Customer service for Professional Display, Projector, Broadcast & ProAV products - The Home of Panasonic Connect Service
Customer service for Panasonic TOUGHBOOK - The Home of Panasonic Connect Service
Exclusive downloads await you, esteemed partner. Please ensure you are logged in to access the exclusive partner files.
