NPM-DX

Full specifications

Model Number	NPM-DX
PCB dimensions (mm)	Single-lane mode: L 50 × W 50 ~ L 510 × W 590Dual-lane mode: L 50 × W 50 ~ L 510 × W 300*When the long spec. conveyor is selected
PCB exchange	2.1 s ( L 275 mm or less); 4.8 s ( L 275 mm or over to L 460 mm or less)May differ depending on PCB specifications.When the short spec. conveyor is selected
Electric Source	3-phase AC 200, 220, 380, 400, 420, 480 V 5.0 kVA
Pneumatic Source	Min.0.5 MPa、200 L /min (A.N.R.)
Placement Head max Speed	Lightweight 16-nozzle head V2 (Per head): 46 200 cph(0.078 s/ chip)Lightweight 8-nozzle head (Per head): 24 000 cph(0.150 s/ chip)4-nozzle head (Per head):8 500 cph (0.424 s/ chip)8 000 cph (0.450 s/ QFP)
Placement Head Placement Accuracy (Cpk≧1)	Lightweight 16-nozzle head V2 (Per head): ±25 μm/Square chipLightweight 8-nozzle head (Per head): ±25 μm/ Square chip; ±40 μm/QFP □12 mmUnder; ±25 μm/QFP □12 mm to □32 mm4-nozzle head (Per head):±20 μm/ QFP
Placement Head Component Dimensions (mm)	Lightweight 16-nozzle head V2 (Per head): 0201 component / 03015 component; 0402 component to L 6 x W 6 x T 3Lightweight 8-nozzle head (Per head): 0402 component ~L 45 x W 45 or L 100 x W 40 x T 124-nozzle head (Per head):0603 chip ~ L 120 x W 90 or L 150 x W 25 x T 30
Component Supply Taping	Lightweight 16-nozzle head V2 (Per head): Tape: 4 / 8 / 12 / 16 / 24 / 32 / 44 / 56 mmLightweight 8-nozzle head (Per head): Tape: 4 / 8 / 12 / 16 / 24 / 32 / 44 / 56 mm4-nozzle head (Per head):Tape:4 ~56 /72 / 88 / 104 mm