1-Chip DLP™ Projectors PT-RQ7 Series

PT-RZ6L

AVAILABLE FROM CY2024 Q3

WUXGA: With High contrast and vibrant colors

View full specifications Share page

Key features

Compact: Lightweight design for easy setup and transport.

Wide Scalability: Intel® SDM-compatible slot for flexible, streamlined integration.

Eco-Friendly Innovation with Proven Reliability and Recycled Materials.

Compact: Lightweight design for easy setup and transport.

Wide Scalability: Intel® SDM-compatible slot for flexible, streamlined integration.

Eco-Friendly Innovation with Proven Reliability and Recycled Materials.

PT-RQ7L	PT-RQ6L	PT-RZ7L	PT-RZ6L
7,500 lm² / 7,500 lm (ANSI)³ / 7,700 lm (Center)⁴	6,500 lm² / 6,500 lm (ANSI)³ / 6,700 lm (Center)⁴	7,500 lm² / 7,500 lm (ANSI)³ / 7,700 lm (Center)⁴	6,500 lm² / 6,500 lm (ANSI)³ / 6,700 lm (Center)⁴
4K (3840 x 2160 pixels)⁵	4K (3840 x 2160 pixels)⁵	WUXGA (1920 x 1200 pixels)	WUXGA (1920 x 1200 pixels)

_{1 PT-RQ7L/RQ6L only.}
_{2 When ET-DLE170 is attached. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.}
_{3 Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped.}
_{4 Average light-output value of all shipped products measured at the center of the screen in NORMAL Mode.}
_{5 Maximum physical resolution of 4K (3840 x 2160) with Quad Pixel Drive [ON].}
_{6 PT-RQ7L/RQ6L only. Supports input signals up to 1080p. The display frame rate corresponds to the input signal frame rate. When using the PT-RQ7L/RQ6L to display 1080/100p, 1080/120p, or 1080/240p content, edge blending and geometric adjustment cannot be used.}
_{7 Input signals to the PT-RZ7L/RZ6L are converted to the projector’s display resolution upon playback. YPBPR 4:2:0 format only for 4K/60p and 4K/50p signals input via DIGITAL LINK.}
_{8 PT-RQ7L/RQ6L only. Optional ET-SWR10 Real-Time Tracking Projection-Mapping System is sold separately.}
_{9 Optional proprietary and third-party function boards compatible with the Intel^® SDM standard-compatible SLOT are sold separately. Panasonic cannot guarantee the operation of third-party devices.}
_{10 The Dust Protected performance of this unit is not guaranteed to be free from damage or failure under all conditions (environment with conductive dust, etc.). Please use an enclosure in environments with smoke containing oil, salt, and moisture.}
_{11 Around this time, the light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, [NORMAL] Mode, [PICTURE MODE] set to [DYNAMIC], Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with 0.15 mg/m³ of airborne particulate matter. Panasonic recommends a checkup at the point of purchase after about 20,000 hours. Light-source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period. Estimated maintenance time varies depending on the environment.}
_{12 By weight of the total mass of plastic parts in the projector main unit. Excludes projection lenses, printed circuit boards, labels, cables, connectors, electronic components, color sensor cases, optical components, ESD components, EMI component adhesives, and coatings.}

Feel free to reach out to us for any further questions or more information about the RQ7 Series.

Compact: Lightweight design for easy setup and transport.

Rich Color Enhancer Brings the Creator’s Work to Life

Rich Color Enhancer is an original 2-mode color optimization technology. Dynamic Mode balances brightness and color for clear visibility in bright environments. Standard Mode optimizes color reproduction by expanding red-channel output for vibrant red expression. This is critical for the accurate and immersive reproduction of artwork and other color-rich content.

Digital Art Mode Increases Visual Impact

Digital Art Mode is a new picture mode that optimizes the presentation of high-quality digital artwork in museums, galleries, and immersive entertainment spaces. This mode allows you to easily enhance projection quality, emphasizing high contrast and vivid color reproduction for a more impactful viewing experience.

_{Note: Graphic is simulated for illustrative purposes only.}

Wide Scalability: Intel® SDM-compatible slot for flexible, streamlined integration.

Supports New Media Processors to Simplify Multi-Projection

The RQ7 Series works with Panasonic’s ET-FMP50 Series media processors to simplify multi-projection complexity. The processors, which comprise box-type and function board-type for the projector's Intel^® SDM standard-compatible SLOT, feature automatic camera-based¹ warping/blending and 4K media playback capabilities.

_{1 Compatible cameras (sold separately) comprise NIKON® D5200/D5300/D5500/D5600/D7500/Z50.}

Wide Scalability with Intel® SDM Standard-Compatible SLOT

The RQ7 Series is compatible with optional proprietary and third-party function boards that insert into its Intel^® SDM standard-compatible SLOT, making it easy to adapt, scale, and expand your projector’s connectivity.

_{Note: The terminal layout pictured is for reference only. Optional proprietary and third-party function boards are sold separately. Panasonic cannot guarantee the operation of third-party devices. The transmission method to the slot must be by HDMI™ signal.}

List of compatible function boards

Smart Projector Control App Smooths Your Workflow

Smart Projector Control app¹ lets you control up to 64 projectors from your phone or tablet. It enables projector setting adjustment from your device, which is useful when OSD menu projection isn’t possible. Other functions include test pattern selection, shutter control, Web Control UI access, lens settings adjustment, brightness locking, and focus adjustment via the device camera² from distances of up to 30 m (98 ft)³. The app enables swift connection to the projector via QR Code scanning⁴, eliminating password/SSID entry.

Visit Smart Projector Control

_{1 Available free from the App Store or the Google Play Store. Check device and OS compatibility before downloading and installing the app.}
_{2 Some devices do not support the projector autofocus function.}
_{3 When projecting a 300-inch image. The maximum distance is 3 m (10 ft) for a 100-inch image.}
_{4 Requires optional AJ-WM50 Series Wireless Module (sold separately). Product availability may vary by country or region.}

Geo Pro Automates Screen Adjustment and Blending

RQ7 Series offers built-in geometric adjustment tools, including a point-based Free Grid function to correct localized screen distortion. It ships with preactivated upgrade kit licenses for Geo Pro software. These comprise the ET-UK20 Geometry Manager Pro Software Upgrade Kit, which expands functionality and adds sophisticated line, shape, and bitmap masking tools, and the ET-CUK10 Auto Screen Adjustment Upgrade Kit, which automates edge-blending including brightness, color, and black level adjustment via a camera.

_{Note: Visit}_PASS_{to register your projector and download free Geometry Manager Pro software for Windows®. Compatible cameras comprise Nikon D5200/D5300/D5500/D5600/D7500. Other conditions apply. Please visit}_PASS_{for more information.}

Contrast Sync and Shutter Sync via LAN Cable Only

Traditionally, Dynamic Contrast control operated individually for each projector in a multi-screen system, leading to step noise in blends due to variations in the Average Picture Level (APL). Panasonic’s Contrast Sync resolves this issue by using the average APL of all projectors in the system, resulting in a seamless multi-screen image. The RQ7 Series is the first Panasonic projector to support Contrast Sync via LAN cable only, eliminating the need for a serial cable connection and reducing system complexity. Additionally, the shutter timing of all sub-projectors is synchronized with the main projector via the LAN connection, ensuring cohesive fade-in/fade-out effects across the entire projection.

Import and Save Custom Test Patterns

In addition to 10x built-in test patterns, users can import and save 4x custom images in JPEG, BMP, or PNG format to an RQ7 Series projector via its Web Control UI or USB memory device for use as test patterns, start-up logos, and no-signal screensavers. Installers can calibrate projectors using client content or custom images without connecting to a media source device.

_{Note: This function replaces Logo Transfer Software.}

Quickly Find the Projection Angle with Angle Monitor

RQ7 Series supports 360° projection angles, enabling image mapping on floors, walls, and 3D objects. However, aligning the projection angle with the design simulation can be challenging and requires two people. The projectors feature a built-in gyro sensor detecting changes in the projector’s pitch and roll angles, graphically displayed in the OSD settings menu. Installers can adjust the projection angle without needing assistance.

_{Note: The displayed values are based on the results of angle sensor detection and may differ from the actual projection angle. They are for reference only, and accuracy is not guaranteed.}

Refreshed Web Control User Interface

_{Note: The displayed values are based on the results of angle sensor detection and may differ from the actual projection angle. They are for reference only, and accuracy is not guaranteed.}

Eco-Friendly Innovation with Proven Reliability and Recycled Materials.

Dust-Resistant Optical Engine

RQ7 Series’s optical engine and laser light source conform to the IP5X Dust Protected (IEC 60529)¹ standard. This eliminates the need for a filter and enables 20,000 hours² of maintenance-free projection. Reliability is proven by accelerated dust-chamber testing in significantly dustier conditions than those in which some competitive products are tested.

_{1 The Dust Protected performance of this unit is not guaranteed to be free from damage or failure under all conditions (environment with conductive dust, etc.). Please use an enclosure in environments with smoke containing oil, salt, and moisture.}
_{2 Around this time, the light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, [NORMAL] Mode, [PICTURE MODE] set to [DYNAMIC], Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with 0.15 mg/m³ of airborne particulate matter. Panasonic recommends a checkup at the point of purchase after about 20,000 hours. Light-source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period. Estimated maintenance time varies depending on the environment.}

Eco Boost Maintains Perceived Brightness with Reduced Consumption

A new Eco Boost mode further reduces energy consumption when Dynamic Contrast is enabled while maintaining perceived brightness.

_{Note: Graphic is simulated for illustrative purposes only.}

Reducing Environmental Impact with Recycled Materials

In addition to using responsibly procured materials, the plastic parts in the main projector body contain about 73%¹ recycled resins, reducing the utilization of virgin materials. By supporting eco-friendly manufacturing processes and pursuing recycling-based programs at end-of-life, your organization helps minimize environmental impact throughout the product’s lifecycle.

_{1 By weight of the total mass of plastic parts in the projector main unit. Excludes projection lenses, printed circuit boards, labels, cables, connectors, electronic components, color sensor cases, optical components, ESD components, EMI component adhesives, and coatings.}

Backup Input Redundancy

Two identical signals can be simultaneously transmitted to HDMI™ 1 (Primary) and HDMI™ 2 (Backup). If transmission to the primary input is interrupted, the projector switches to the backup automatically in a minimum of 0.3 seconds¹ without screen-blanking. This layer of insurance gives greater peace of mind during events where image display can’t be interrupted.

_{1 Varies depending on the Backup Input mode and the connected external device.}
_{Note: Primary and backup terminal assignments are fixed. The input signals to primary and backup inputs must be identical.}

Multi-Laser Drive Engine Enhances Reliability

Multiple laser modules are equipped with Failover Circuitry. In the unlikely event a single diode fails, Failover Circuitry continues to supply electricity to the functional diodes in the series, minimizing brightness loss. If the same issue were to occur in projectors without Failover Circuitry, all diodes in the module might shut down, resulting in a significant loss of brightness.

Reduce Errors with Remote Preview LITE

Remote Preview LITE allows projectionists to confirm connectivity and assess image adjustments before the video is projected by viewing preview thumbnails on a laptop. This is valuable at live events where checking content on the screen is limited due to soundchecks and other logistical factors. Accessible via software or web browser, it works with the projector in Standby¹ or with the shutter on, minimizing errors before performances.

_{1 Projector must be set to Pre-Show Mode.}
_{Note: Requires Multi-Monitoring & Control Software Version 3.3 or later.}

Multi-Monitoring & Control Software Download Multi-Monitoring & Control Software

Other Features

Supports Art-Net DMX, PJLink™, Crestron Connected^® V2, Crestron^® XiO Cloud, and Extron XTP^®
Supports IPv6¹ network protocol
Supports widescreen 21:9 input signals
USB port for DC 5 V/2 A power supply, optional AJ-WM50 Series
Wireless Module, and data transfer
Compatible with the Multiple PJ Firmware Batch Update Tool
Data-Cloning Function² via LAN or USB
Quick Start and Quick Off
Multi-screen Support System
Multi-Unit Brightness and Color Control
DICOM Simulation Mode
Waveform Monitor Function

_{1 Optional AJ-WM50 Series Wireless Module is not compatible with IPv6.}
_{2 Data cloning is supported among models in the same series with the same resolution. Passwords, projector ID, and network settings are excluded.}

Specifications table

Projector type	1-Chip DLP™ projector
DLP™ Chip \| Panel Size	17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
DLP™ chip \| Number of Pixels	2,304,000 (1920 x 1200 pixels)
Light Source	Laser diodes
Resolution	WUXGA (1920 x 1200 pixels)
Contrast Ratio*2	15,000:1 (Full On/Full Off, Dynamic Contrast [3])
Screen Size (Diagonal)	1.27–5.08 m (50–200 in) with ET-DLE055, 1.27–15.24 m (50–600 in) with ET-DLE060/ET-DLE085/ET-DLE105/ET-DLE150/ET-DLE170/ET-DLE250/ET-DLE350/ ET-DLE450, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020G/ET-DLE020

View full specifications

Accessories & Software

Lenses for 1-Chip DLP

ET-DLE085

0.8-1.0:1 throw ratio (WUXGA)

Key Features
Compact size, fits inside camera body same as WM30.
Dual Band 2.4GHz and 5GHz (IEEE802.11 a/b/g/n/ac compliant)
High security WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/AES), WEP (64 bit/128 bit)

Key Features
Compact size, fits inside camera body same as WM30.
Dual Band 2.4GHz and 5GHz (IEEE802.11 a/b/g/n/ac compliant)
High security WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/AES), WEP (64 bit/128 bit)

Key Features
Long-distance DIGITAL LINK transmission of up to 150 m through a single LAN cable
Lower cabling costs and reduced wiring complexity
Self-contained with integrated splitter, switcher, scaler, and DIGITAL LINK conversion technology
Connect multiple ET-YFB200G switchers to accommodate extra display devices
Compact half-rack dimensions

Key Features
Long-distance DIGITAL LINK transmission of up to 150 m through a single LAN cable
Lower cabling costs and reduced wiring complexity
Self-contained with integrated splitter, switcher, scaler, and DIGITAL LINK conversion technology
Connect multiple ET-YFB200G switchers to accommodate extra display devices
Compact half-rack dimensions

1-Chip DLP™ Projectors PT-RQ7 Series

PT-RZ6L

Key features

Feel free to reach out to us for any further questions or more information about the RQ7 Series.

Compact: Lightweight design for easy setup and transport.

Rich Color Enhancer Brings the Creator’s Work to Life

Wide Scalability: Intel® SDM-compatible slot for flexible, streamlined integration.

Supports New Media Processors to Simplify Multi-Projection

Wide Scalability with Intel® SDM Standard-Compatible SLOT

Smart Projector Control App Smooths Your Workflow

Geo Pro Automates Screen Adjustment and Blending

Contrast Sync and Shutter Sync via LAN Cable Only

Import and Save Custom Test Patterns

Quickly Find the Projection Angle with Angle Monitor

Refreshed Web Control User Interface

Eco-Friendly Innovation with Proven Reliability and Recycled Materials.

Dust-Resistant Optical Engine

Eco Boost Maintains Perceived Brightness with Reduced Consumption

Reducing Environmental Impact with Recycled Materials

Backup Input Redundancy

Multi-Laser Drive Engine Enhances Reliability

Reduce Errors with Remote Preview LITE

Other Features

Specifications table

Accessories & Software

ET-DLE085

ET-DLE150

ET-DLE250

ET-DLE350

AJ-WM50P

AJ-WM50P

ET-PKD120H

ET-PKD120S

ET-PKD130H

ET-PKD130B

ET-YFB200G

ET-YFB200G

TY-SDVoE-SDM

TY-SDI-HDTV-SDM

TY-HDBT-SDM

TY-SB01FB

ET-SBFMP10

ET-FMP20

ET-FMP50

ET-SBFMP10

ET-FMP20

ET-FMP50

TY-WPS1 series

Related resources