LCD Projector
PT-CMZ50
Laser Projector Delivers Big Pictures from Ultra-Short Distances with Minimal Shadowing, Easy Installation, and Convenient Adjustment
Key features
| Project Large Images in Rooms with Limited Space |
| Simplified Installation, Setup, and Adjustment |
| Stress-free Daily Operation |
| PT-CMZ50 LCD Projector | |
| Brightness | 5,200 lm |
| Resolution | WUXGA (1920 x 1200 pixels) |
| Throw Ratio | 0.235:1 |
| Technology | LCD |
| Weight | Approx. 9.5 kg |
Big Pictures with Fewer Shadows
Share large 80–120-inch images in rooms of any size, from small huddle rooms to hybrid classrooms where installation space on the ceiling is limited. The compact ultra-short-throw design can deliver an 80-inch image from a distance of about 1 cm (1/3 in.)1. Since the lens is forward of the presenter, shadowing and dazzling are reduced so everyone can communicate comfortably. The large picture and detailed WUXGA resolution make it ideal for displaying small text.
1 Value is the distance from the projector body to the wall.
Stylish Design Harmonizes with Your Space
The projector’s minimal screen offset makes it a practical choice for rooms with low ceilings, where it installs almost flush to the wall. Available in black or white, its integrated body has no protrusions to spoil a clean, elegant style that harmonizes with any interior design. Installed in an office, classroom, or museum, this unobtrusive projector fades from the group’s awareness so attention remains focused on the presentation.
Ultra-Quiet Design for Hybrid Spaces
CMZ50’s heat-resistant light source significantly reduces exhaust noise and unwanted distractions when people are seated close to the projector. Quiet running also improves the audibility of conversations during hybrid lessons and meetings by reducing background noise. In Quiet Mode, its operating noise is just 25 dB1, about the same apparent loudness as rustling leaves. In fact, with a perceived loudness that is less than one third2 that of a comparable lamp-based projector, CMZ50 keeps everyone alert and focused on the presentation.
1 34 dB in NORMAL/ECO Mode.
2 Based on a comparison between PT-CMZ50 (25 dB) and PT-TW381R (30 dB) in QUIET Mode. The human ear perceives changes in sound intensity on a logarithmic scale. The perceived difference in sound volume between the two products was calculated using the following formula: Perceived difference = 10 ^ [(dB1 - dB2) / 10].
Smooth, Crisp Details at WUXGA
WUXGA (1920 x 1200) LCD panels improve text definition and clarify details for a more insightful and engaging presentation. Text edges are smooth, sharp, and easy to read. Documents and images are clearly reproduced, allowing stress-free viewing of documents and images. In addition, content from various devices can be projected at the same aspect ratio.
Effortlessly Delivers Widescreen Content
Widescreen video-conferencing software layouts can be output to a CMZ50 projector so that the faces of remote participants appear along the bottom of the screen at eye level to those seated in the room, improving communication fluency. CMZ50 accepts 2560 x 1080 (21:9) or 3240 x 1080 (27:9) input signals1 to enable the display of widescreen content at its original aspect ratio. It includes an HDMI™ OUT terminal and edge-blending function to support the connection of a second CMZ50 projector so that widescreen content can be displayed over two screens at its native resolution and aspect ratio. It’s also possible to share content from the main projector to a second projector or monitor the presentation on a remote display.
1 A 2560 x 1080 (21:9) input signal is displayed at 1920 x 810 (21:9), and a 3240 x 1080 (27:9) input signal at 1920 x 640 (27:9)
High Brightness and Contrast for Impressive Visual Impact
Projectors in classrooms, offices, and museums must be powerful enough to cut through bright ambient light. CMZ50 delivers up to 5,200 lm1 of brightness for sharp, well-saturated pictures in bright environments. Dynamic Contrast uses scene-linking technology to analyze each video frame and digitally adjust light output according to the contrast requirements of each scene. Its high 3,000,000:12 contrast ratio improves text legibility and defines detail in shadows even in brightly lit spaces.
1 When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. Measurement, measuring conditions, and method of notation are all compliant with
ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
2 Full On/Full Off, when [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1]. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
Detail Clarity Processor 4
Proprietary circuitry analyzes individual video frames to clarify areas of each image containing fine details. Algorithms extract data from four frequency bands of the signal, sharpening outlines, correcting contours, and reducing ringing noise for increased text definition and clearer detail resolution in video and graphics.
Powered Center and Periphery Focus via Remote Control
Once the unit is secured in place, post-installation adjustment is easily performed using the remote control: no more balancing on stepladders to reach manual controls on the projector body. Buttons for the powered center focus and powered periphery focus functions ensure uniform image sharpness from center to edges.
Digital Zoom Extender and Digital Image Shift
If it’s not possible to install your CMZ50 projector in the optimal position, the Digital Zoom Extender and Digital Image Shift functions may be useful. In addition to digitally adjusting the image size so it fits on the screen, you can digitally shift the projection by up to ±10% vertically and up to ±10% horizontally. The image position and size can be flexibly changed to fit your screen without touching the projector.
Wall Mount Saves Your Time and Resources
Optional ET-WBC100 hardware is available for wall-mount projection. The hardware is partially pre-assembled, reducing the number of screw points and the time and effort required for installation. Its lightweight design minimizes the burden during installation. In addition to sliding back and forth, left and right, and up and down, a dial provides ±5° vertical and horizontal tilt adjustment and ±5° of horizontal rotation adjustment. Corrections can be maintained after adjustment without needing a separate locking adjustment screw, allowing for quick and precise adjustment.
Equipped with Various Screen Correction Functions
When projecting obliquely, you can correct any resulting image distortion using screen adjustment functions accessed via the remote control. These include 4-Corner Correction and Vertical/Horizontal Keystone Correction, which resolve distortion based on the projection angle, and Curved Screen Correction1, which reduces image distortion when projecting onto curved surfaces such as a curved blackboard or thin board.
Integrates with Your 4K Audio-Visual System
CMZ50 accepts 4K input signals1 via HDMI™ and DIGITAL LINK connections. That’s a big help if you distribute 4K content from a media server to various display endpoints that have different screen resolutions. You don’t need to manually reencode the video content to suit this projector or use an external video converter, reducing system and workflow complexity.
1 Supports signals up to 4K/30p. A signal with different resolution is converted to the number of display dots (1920 x 1200 dots).
Includes a USB Port
The projector includes a USB terminal supporting DC 5 V/2 A power supply for the optional Wireless Presentation PressIT1 receiver or a compatible media streaming device2. The built-in power supply reduces cable clutter for a neat and tidy installation. It can also be used to connect the optional AJ-WM50 Series Wireless Module, perform firmware updates, or project still images3 stored on a USB memory device using the Memory Viewer function.
1 Wireless Presentation System PressIT is sold separately. Availability may vary by country or region. For more information, please click here.
2 Compatibility with third-party devices cannot be guaranteed.
3 For a list of image formats supported by Memory Viewer, please consult the Operating Manual.
Reduces Environmental Impact, from Unboxing to EOL
Make the change to eco-friendly Panasonic projection and reduce your organization’s impact on the environment. The CMZ50’s watts-per-lumen efficiency is about 31%1 better than comparable lamp-based projectors, with a maximum power consumption of 325 W (AC 100–120 V) or 310 W
(AC 200–240 V). You can improve energy efficiency further by projecting in ECO or QUIET mode. There are no more lamp disposal hassles, and the filter can be washed and reused twice2, making CMZ50 an eco-friendly choice from unboxing through to your next refreshment cycle.
Absolute Reliability with Minimal Maintenance
Consistent and long-lasting picture quality is just one benefit of the CMZ50 laser projector. The light source and ECO Filter don’t need maintenance until about 20,000 hours1. Comparable lamp projectors would need between one and four lamp changes plus filter replacement if operated for the same amount of time. Furthermore, laser projectors don’t need as much time to warm up and are less prone to unexpected downtime.
1 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C [86 °F], elevation 700 m [2,297 ft] with 0.15 mg/m3 of particulate matter). The estimated time until light output declines to 50 % varies depending on the environment. The filter can be washed and reused up to two times. Filter cleaning cycle: 20,000 hours (under dust conditions of 0.08 mg/m3), 10,000 hours (under dust conditions of 0.15 mg/m3).
Start Work Instantly
Start the class or meeting instantly without delays that can lose your group’s attention. Unlike lamp-based projectors, which take time to warm up, CMZ50 can project your content from Standby in about one second1. It also features a Direct Off function, so you can turn the projector off anytime via the room breaker switch without risk of damage.
1 When [ECO MANAGEMENT] > [QUICK STARTUP] is set to [ON]. [QUICK STARTUP] is unavailable after the [AVAILABLE PERIOD] setting has expired. When [QUICK STARTUP] is set to [ON], the projector continues to warm up, increasing power consumption. When [QUICK STARTUP] is set to [ON], the standby period when the [QUICK STARTUP] function is valid will be added as the projector runtime. [QUICK STARTUP] cannot be set when [STANDBY MODE] is set to [ECO]. Time varies depending on connection terminals, signals, and other conditions.
CEC Command-Compatible HDMI™ Makes Life Easy
Both of the projector’s HDMI™ inputs are compatible with CEC commands1 to enable use with fewer remote controllers. The projector will automatically switch on, play your content, and switch off when it detects these commands from a compatible source device such as a
Blu-ray™ player, media streamer, or optional Wireless Presentation System PressIT2.
1 Depending on the connected CEC command-compatible device, the link control may not operate normally.
2 Wireless Presentation System PressIT is sold separately. Availability may vary by country or region. For more information, please click here.
Project Wirelessly from Your Smartphone or Laptop
Share content wirelessly1 from your laptop or smartphone. Just scan the QR code shown in the on-screen display menu using your smartphone’s camera, and your device will connect to the projector automatically over wireless LAN, with no SSID or passwords required. Then use free Panasonic wireless apps2 to beam your media to the big screen.
1 Optional AJ-WM50 Series Wireless Module (sold separately) is required to enable wireless functions, including connection via QR code. Product availability may vary by country or region.
2 Free software is available for Windows® PC here. Wireless Projector app is available from the App Store or the Google Play store. Please check the compatibility of your device before installation.
PressIT for More Convenient Document Sharing
Share your screen wirelessly and switch presenters freely. PressIT is Panasonic’s optional Wireless Presentation System that allows easy screen sharing with just a single press of a button. PressIT comprises a receiver connected to the projector and transmitters that connect to PCs or mobile devices1. A neat, stylish layout is achieved by securing power from your CMZ50 projector, which supports DC 5 V/2 A power supply via its USB terminal. Learn more about PressIT here or visit our Wireless Solutions webpage.
Other Features
Monitor and control up to 2,048 display devices via LAN. The software enables status monitoring, device control, playlist delivery, playback scheduling, and system-map visualization. A free 90-day trial of optional Early Warning software is included. It notifies the admin of playback or device errors and sends alerts when symptoms of trouble are detected. The software links with compatible network cameras for live screen monitoring, and you can monitor devices remotely from a tablet via VPN. Software data can be acquired via Web API and installed onto an existing control application. For more information, visit our software information webpage.
- Built-in 10 W speaker, mic input, audio output, and shutter function
- DICOM Simulation Mode
- Supports PJLink™, Crestron Connected™, and AMX® DD
- Control emulation function
- Free 360° installation
- ECO Management System
- Presentation Support System
Specifications table
| Lens | Fixed zoom, powered focus lens, F = 1.7, f = 2.81 mm, throw ratio: 0.235:1 (16:10 aspect ratio) (Projection distance: 1 cm [1/3 in] for 80-inch image) |
|---|---|
| Installation | Ceiling/floor, front/rear, free 360-degree installation |
| Screen Size (Diagonal) | 2.03–3.05 m (80–120 in) (16:10 aspect ratio) |
| Dimensions (W x H x D) | 495 mm x 160 mm x 421 mm (19 1/2˝ x 6 19/64˝ x 16 37/64˝) (excluding feet and protrusions),495 mm x 176 mm x 421 mm (19 1/2˝ x 6 15/16˝ x 16 37/64˝) (with feet at shortest position) |
| Weight with supplied lens*10 | Approx. 9.5 kg (20.9 lbs) |
| Power Supply | AC 100 V–240 V, 50/60 Hz |
Accessories & Software
Brackets
ET-WBC100
The Wall Mount Bracket is designed for compatibility with the PT-CMZ50 projector.
Brackets
ET-PKD120H
High ceiling mount bracket
Brackets
ET-PKD120S
Low ceiling mount bracket
Brackets
ET-PKD130H
ET-PKD130H
Brackets
ET-PKE301B
Mount bracket for the PT-MZ16K, PT-MZ770, PT-MZ670, PT-MZ570 Series projectors
Showing 5 of 5
DIGITAL LINK Switcher
ET-YFB200G
2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.
Showing 1 of 1
DIGITAL LINK Switcher
ET-YFB200G
2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.
Showing 1 of 1
Digital Interface Box
ET-YFB100G
By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.
Showing 1 of 1
Digital Interface Box
ET-YFB100G
By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.
Showing 1 of 1
PressIT
TY-WPS1 series
“PressIT” is Panasonic’s Wireless Presentation System that allows easy screen collaboration with just a single press of a button. This elegant solution, designed to make collaboration quick and simple in meeting rooms, can connect up to 32 devices at one time, allowing users to present on screen or via a projector at the touch of a button..
Showing 1 of 1
Metadata Handling
AJ-WM50P
The AJ-WM50 is the dual band, compact wireless module for P2HD and AG-DVX200 camera recorders.
The WM50 dual band (2.4GHz and 5GHz) makes for a more reliable, stable connection to a network in various environments yet its compact size enables it to fit in the wireless module compartment of the P2HD cameras. 2.4GHz offers strong connection through obstacles and compatible with many devices whereas 5GHz offers stability from radio wave interference (Microwave, Bluetooth, etc).
Showing 1 of 1
Metadata Handling
AJ-WM50P
The AJ-WM50 is the dual band, compact wireless module for P2HD and AG-DVX200 camera recorders.
The WM50 dual band (2.4GHz and 5GHz) makes for a more reliable, stable connection to a network in various environments yet its compact size enables it to fit in the wireless module compartment of the P2HD cameras. 2.4GHz offers strong connection through obstacles and compatible with many devices whereas 5GHz offers stability from radio wave interference (Microwave, Bluetooth, etc).
Showing 1 of 1
Related resources
Showing 12 of 15
Sorry there was an error...
The files you selected could not be downloaded as they do not exist.
You selected items.
Continue to select additional items or download selected items together as a zip file.
You selected 1 item.
Continue to select additional items or download the selected item directly.
Share page
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: