Breadcrumb
10,000 lumens-class compact Solid Shine laser projector
PT-RX110
DiscontinuedLaser 1-chip DLP, 10400 lumens (centre), XGA, 20000:1, Solid Shine Laser, Digital Link,
Key features
Laser 1-chip DLP, 10400 lumens (centre), XGA |
High brightness and excellent image quality with laser light source |
Maintenance free up to 20000 hours with dust-resistant optical block and long lasting laser engine |
Free 360 degrees installation |
10,000:1 contrast ratio |
PT-RZ970 | PT-RW930 | PT-RX110 | |
---|---|---|---|
Brightness | 10 000 lm (center) 9 400 lm (ANSI) | 10 000 lm (center) 9 400 lm (ANSI) | 10 400 lm (center) 10 000 lm (ANSI) |
Resolution | WUXGA (1920x1200) | WXGA (1280x800) | XGA (1024x768) |
Contrast | 10,000:1 (All White/All Black) (Dynamic Contrast3) | 10,000:1 (All White/All Black) (Dynamic Contrast3) | 10,000:1 (All White/All Black) (Dynamic Contrast3) |
High Picture Quality and Long-lasting Reliability
- Combines 1-Chip DLP™ imaging with proprietary SOLID SHINE laser technology for immersive picture quality at 10,400 lm (center) of brightness*1
- Dynamic Light Control for 10,000:1 contrast*2
- Accurate white balance and color reproduction in any projection mode
- Long-lasting picture quality
- Detail Clarity Processor 3 clarifies the finest details
- System Daylight View 2 ensures sharp and vivid images in bright environments
Consistently Stable and Reliable Performance
- Dust-resistant structure with airtight optical block
- Dual-drive laser optical engine ensures reliable 24//7 operation with light source failover protection
- Up to 20,000 hours of continuous maintenance-free operation*3
- Selectable operational modes extend service life to up to 10 years*4
- Efficient cooling system for stable operation in ambient temperatures of up to 45 °C (113 °F)*5
- High-speed backup input switching
Versatile System and Installation Flexibility
- Shares optional lenses with Panasonic 1-Chip DLP™ projector family
- Compact body and free 360-degree installation (vertical and horizontal)
- DIGITAL LINK supports transmission of uncompressed full HD video and control commands through a single CAT 5e or higher STP cable for distance up to 150 m (492 ft)*6
- Geometric Adjustment for specially shaped screens
*1 PT-RZ970/RW930 features brightness of 10,000 lm (Center), and PT-RX110 features 10,400 lm (Center), *2 With Dynamic Contrast Mode set to 3, *3 At 20,000 hours, projector brightness will have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after every 20,000-hour period (approximately). Light source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period, *4 With operating Mode set to Long Life 3, in which mode brightness is lowered to 1,900 lm. 24 hours/day x 365 days/year x 10 years = 87,600 hours. Replacement of parts other than the light source may be required in a shorter period, *5 Light output may be reduced to protect the projector depending on environmental conditions, *6 150 m (492 ft) transmission available only with ET-YFB200G DIGITAL LINK Switcher for signals up to 1080/60p (dot-clock frequency 148.5 MHz). Transmission distance is up to 100 m (328 ft) in other cases
Product gallery
Specifications table
Power Supply | AC100 - 240V 10.4-5.0A 50Hz/60Hz |
---|---|
Power Consumption | 1,050W NORMAL: 742W ECO: 617W LONG LIFE1: 410-588 LONG LIFE 2: 375-588W LONG LIFE 3: 349-588W SHUTTER: 82W STANDBY MODE [ECO]*1: 0.2W STANDBY MODE [NORMAL]: 3W STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft), ICE62087: 2008 Broadcast contents, Picture mode: Standard, Dynamic Contrast2 |
BTU Value | Max 3,584 BTU |
DLP™ Chip | Panel Size | 17.8 mm (0.7 in) diagonal (4:3 aspect ratio) |
DLP™ Chip | Display Method | DLP™ chip x 1, DLP™ system |
DLP™ Chip | Pixels | 786,432 (1024 x 768) x 1, total of 786,432 pixels |
Lens | PT-RX110B/W | Powered zoom/focus lenses (1.8-2.5:1), F 1.7-1.9, f 25.6-35.7 mm |
Lens | PT-RX110LB/LW | Optional powered zoom/focus lenses and xed-focus lens |
Product series
PT-RZ970 Series
PT-RZ970 Series | |||
---|---|---|---|
Model | |||
DLP™ Chip | Panel Size | 17.0 mm (0.67 in) diagonal (16:10 aspect ratio) | 17.8 mm (0.7 in) diagonal (4:3 aspect ratio) | 16.5 mm (0.65 in) diagonal (16:10 aspect ratio) |
DLP™ Chip | Display Method | DLP™ chip × 1, DLP™ system | DLP™ chip x 1, DLP™ system | DLP™ chip × 1, DLP™ system |
DLP™ Chip | Number of Pixels | 2,304,000 (1920 × 1200) × 1, total of 1,024,000 pixels | 786,432 (1024 x 768) x 1, total of 786,432 pixels | 1,024,000 (1280 × 800) × 1, total of 1,024,000 pixels |
Brightness | 10.000 lumens (centre)/ 9.400 lumens | 10,400 lumens (Center)/ 10,000 lumens | 10,000 lumens (Center)/ 9,400 lumens |
Light Source | Laser Diode Laser class 1(Class3R for US models)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 30°C (86°F), Altitude 700m (2,297 ft), Dust: 0.15mg/m3
Dynamic Contrast3
43,800 hours at constant luminance (LONG LIFE1)
61,320 hours at constant luminance (LONG LIFE2)
87,600 hours at constant luminance (LONG LIFE3) | Laser Diode Laser class 1(Class3R for US models)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 30°C (86°F), Altitude 700m (2,297 ft), Dust: 0.15mg/m3
Dynamic Contrast3
43,800 hours at constant luminance (LONG LIFE1)
61,320 hours at constant luminance (LONG LIFE2)
87,600 hours at constant luminance (LONG LIFE3) | Laser Diode Laser class 1(Class3R for US models)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 30°C (86°F), Altitude 700m (2,297 ft), Dust: 0.15mg/m3
Dynamic Contrast3
43,800 hours at constant luminance (LONG LIFE1)
61,320 hours at constant luminance (LONG LIFE2)
87,600 hours at constant luminance (LONG LIFE3) |
BTU Value | Max 3,584 BTU | Max 3,584 BTU | Max 3,584 BTU |
Resolution | 1920 × 1200 pixels | XGA 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.) | WXGA 1,280 x 800 pixels (Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.) |
Contrast Ratio | 10,000:1 (All White/All Black) (Dynamic Contrast3) | 10,000:1 (All White/All Black) (Dynamic Contrast3) | 10,000:1 (All White/All Black) (Dynamic Contrast3) |
Screen Size | 1.27- 15.24 m (50-600 inches) (16:10 aspect ratio)
*1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio)
*2.54 - 7.62 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio) | 1.27 - 15.24 m (50 - 600 inches) (4:3 aspect ratio)
*1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (4:3 aspect ratio )
*2.54 - 7.62 m (100 - 350 inches) with the ET-DLE030 (4:3 aspect ratio) | 1.27- 15.24 m (50-600 inches) (16:10 aspect ratio)
*1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio)
*2.54 - 7.62 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio) |
Optical Axis Shift | Vertical: +50%, -16%(powered),
Horizontal: +30%, -10%
(When using the ET-DLE085/DLE105, +28%, -10%) (powered)
NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055.
If using the ET-DLE030, the optical axis is fixed. | Vertical: +60%, -16%(powered),
Horizontal: +30%, -10%
(When using the ET-DLE085/DLE105, +28%, -10%) (powered)
NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055.
If using the ET-DLE030, the optical axis is fixed. | Vertical: +60%, -16%(powered),
Horizontal: +30%, -10%
(When using the ET-DLE085/DLE105, +28%, -10%) (powered)
NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055.
If using the ET-DLE030, the optical axis is fixed. |
Installation | Ceiling/floor, front/rear, 360 degree free installation | Ceiling/floor, front/rear, 360 degree free installation | Ceiling/floor, front/rear, 360 degree free installation |
Terminals | SDI In | BNC × 1,
3G-SDI signal: SMPTE ST 424 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant | ||
Terminals | HDMI In | HDMI 19-pin × 1, Deep Color, compatible with HDCP | HDMI 19-pin x 1, Deep Color, compatible with HDCP | HDMI 19-pin × 1, Deep Color, compatible with HDCP, |
Terminals | DVI-D In | DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP,
for single link only | DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP,
for single link only | DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, for single link only |
Terminals | RGB 1 In | BNC × 5 | BNC x 5 | BNC × 5 |
Terminals | RGB 1 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic |
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | Y:1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
Terminals | RGB 1 In | Video in | 1.0Vp-p, 75 ohms | 1.0Vp-p, 75 ohms | 1.0Vp-p, 75 ohms |
Terminals | RGB 2 In | D-sub HD 15-pin (female) × 1 | D-sub HD 15-pin (female) x 1 | D-sub HD 15-pin (female) × 1 |
Terminals | RGB 2 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic |
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms | Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms | Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms |
Terminals | Multi Sync In | D-sub 9-pin (female) × 1 for external control (RS-232C compliant) | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | D-sub 9-pin (female) × 1 for external control (RS-232C compliant) |
Terminals | Multi Sync Out | D-sub 9-pin (male) x 1 for link control | D-sub 9-pin (male) x 1 for link control | D-sub 9-pin (male) x 1 for link control |
Terminals | Remote 1 In | M3 jack x 1 for wired remote control | M3 jack x 1 for wired remote control | M3 jack x 1 for wired remote control |
Terminals | Remote 1 Out | M3 jack x 1 for link control (for wired remote control) | M3 jack x 1 for link control (for wired remote control) | M3 jack x 1 for link control (for wired remote control) |
Terminals | Remote 2 In | D-sub 9-pin (female) x1 for external control (parallel) | D-sub 9-pin (female) x1 for external control (parallel) | D-sub 9-pin (female) x1 for external control (parallel) |
Terminals | DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
connection, 100Base-TX, compliant with PJLink™(Class 1)
Deep Color, HDCP | RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
connection, 100Base-TX, compliant with PJLink™(Class 1)
Deep Color, HDCP | RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
connection, 100Base-TX, compliant with PJLink™(Class 1)
Deep Color, HDCP |
Power Supply | AC100-240V 3.5A 50/60 Hz | AC100 - 240V 10.4-5.0A 50Hz/60Hz | AC100 - 240V 10.4-5.0A 50Hz/60Hz |
Power Consumption | 1,050W
NORMAL: 742W ECO: 617W LONG LIFE1: 410-588
LONG LIFE 2: 375-588W LONG LIFE 3: 349-588W SHUTTER: 82W
STANDBY MODE [ECO]*1: 0.2W STANDBY MODE [NORMAL]: 3W
STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft),
ICE62087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic Contrast2 | 1,050W
NORMAL: 742W ECO: 617W LONG LIFE1: 410-588
LONG LIFE 2: 375-588W LONG LIFE 3: 349-588W SHUTTER: 82W
STANDBY MODE [ECO]*1: 0.2W STANDBY MODE [NORMAL]: 3W
STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft),
ICE62087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic Contrast2 | 1,050W
NORMAL: 742W ECO: 617W LONG LIFE1: 410-588
LONG LIFE 2: 375-588W LONG LIFE 3: 349-588W SHUTTER: 82W
STANDBY MODE [ECO]*1: 0.2W STANDBY MODE [NORMAL]: 3W
STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft),
ICE62087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic Contrast2 |
Operation Noise | 41dB (37dB[QUIET1] / 35dB[QUIET2]) | 41dB (37dB[QUIET1] / 35dB[QUIET2]) | 41dB (37dB[QUIET1] / 35dB[QUIET2]) |
Operating Temperature | 0-45 °C (32-113 °F) * 6 | 0-45 °C (32-113 °F) *6 | 0-45 °C (32-113 °F) * 6 |
Cabinet Materials | Molded plastic | Molded plastic | Molded plastic |
Dimensions | PT-RZ970B/RZ970W:
498 x 200*5 x 581mm
(19-19/32 x 7-7/8*5 x 22-7/8in ) with supplied lens
PT-RZ970LB/RZ970LW:
498 x 200*5 x 538 mm
(19-19/32 x 7-7/8*5 x 21-3/16in) without lens | PT-RW930B/RW930W:
498 x 200*5 x 581mm
(19-19/32 x 7-7/8*5 x 22-7/8in ) with supplied lens
PT-RW930LB/RW930LW:
498 x 200*5 x 538 mm
(19-19/32 x 7-7/8*5 x 21-3/16in) without lens | |
Weight | PT-RZ970B/RZ970W:
Approx. 23.2kg (51.1lbs) with supplied lens
PT-RZ970LB/RZ970LW:
Approx. 22.4kg (49.4lbs) without lens | PT-RW930B/RW930W:
Approx. 23.2kg (51.1lbs) with supplied lens
PT-RW930LB/RW930LW:
Approx. 22.4kg (49.4lbs) without lens | |
Technology | 1-Chip DLP Laser | 1-Chip DLP Laser | 1-Chip DLP Laser |
Accessories & Software
Lenses for 1-Chip DLP
ET-DLE085
0.8-1.0:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE150
1.3-1.9:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE250
2.3-3.6:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE350
3.6-5.4:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE450
5.4-8.6:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE170
1.7-2.4:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE105
1.0-1.3:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE035
0.380:1 throw ratio (WUXGA) Ultra Short Throw Lens capable of projecting on 100-350 inch diagonal screen sizes.
Showing 8 of 8
Brackets
ET-PKD120H
High ceiling mount bracket
Brackets
ET-PKD120S
Low ceiling mount bracket
Brackets
ET-PKD130H
ET-PKD130H
Brackets
ET-PKD130B
Bracket assembly
Showing 4 of 4
Frames
ET-RFD40
The rental frames are sturdy, strong and visually appealing. In addition, they offer a horizontal and vertical adjustment feature for the ideal projector position.
Showing 1 of 1
Related resources
Showing 12 of 35
Showing 12 of 14
Sorry there was an error...
The files you selected could not be downloaded as they do not exist.
You selected items.
Continue to select additional items or download selected items together as a zip file.
You selected 1 item.
Continue to select additional items or download the selected item directly.
Share page
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: