World's Smallest and Lightest 30,000 lm 3-Chip DLP™ Projectors

PT-RZ34K

Vivid reds and truer blues heighten realism for ultra-detailed 4K or WUXGA image reproduction.

Scroll down

Key features

Laser 3-chip DLP, 32.000 lumens (centre), WUXGA
Lamp-free laser projection with dust resistant liquid cooling system for 20000 hours maintenance free operation
Smart Projector Control with NFC for mobile access to network con­figuration such as IP address setup
Preactivated Upgrade Kits for Geo Pro Software
Two blue and one red laser module expands colour-gamut reproduction
 PT-RQ35PT-RZ34
Brightness30,500 lm / 32,000 lm (center)30,500 lm / 32,000 lm (center)
Resolution4K (3840x2400 px)WUXGA (1920x1200 px)

Revolutionizing Projection with Streamlined Workflow

World's Smallest and Lightest 30,000-lumen-class 3-Chip DLP™ Projector*1 

Despite its high brightness and image quality, PT-RQ35K Series is the smallest and lightest 3-Chip DLP™ product in its class and can be transported and installed with two people. Save on labor and enjoy greater convenience when storage space is limited. PT-RQ35K Series is 40 %*2 smaller than the current PT-RQ32K, and its footprint is almost equivalent to the PT-RQ22K. With its manageable size and weight, PT-RQ35K Series creates exciting new opportunities for high-brightness projection in venues where installation space is limited.

*1 As of August 2020, *2 By cabinet volume according to internal research

Smart Projector Control with NFC Function*1 

Smart Projector Control is an application for iOS and Android™ devices. The app lets you prepare the PT-RQ35K Series for setup before power is available on site. Adjust settings such as Projector ID and IP address with the projector unplugged using NFC function (which can be set to read/write, read-only, or turned off). Navigate and configure OSD settings without projecting the menu. As well as enabling various lens adjustments, the app lets you focus the projection using your smartphone camera*2 from distances of up to 30 m*3 (98 ft) away. To quickly and easily connect the projector to the wireless network*2, scan a QR Code displayed on the projector’s Information Monitor. There’s no need for manual SSID selection and password entry. Smart Projector Control makes it easier to set up and control multiple projectors right from your device’s touchscreen. For more information, visit the Smart Projector Control website.

*1 Projectors sold in some countries or regions require an ET-NUK10 Upgrade Kit available from PASS to activate NFC function. See NFC Regional Compatibility List for details, *2 Some devices do not support projector autofocus function, *3 When projecting a 300-inch image. Maximum distance is 3 m (10 ft) for a 100-inch image, *4 Requires optional AJ-WM50 Wireless Module.

Spellbinding Picture Quality

Red and Blue Lasers for Deep, Accurate Colour

A combination of two blue and one red laser module expands colour-gamut reproduction to 114 %* of the PT-RQ32K with 91 % DCI coverage, saturating the screen in lavish colour and drawing the audience deeper into the artist’s world. Optimized blue-laser wavelengths achieve truer blue while the red laser intensifies red expression for a greater sense of realism.

* In comparison to the PT-RQ32K according to internal research.

Stable Design for Reliable Operation

Dynamic Digital Control for Stable Colour Performance

While red lasers heighten colour expression, their successful implementation has been challenged by inherent sensitivity to temperature fluctuations. Dynamic Digital Control solves the problem by modulating red-laser output frame-by-frame to achieve optimal RGB balance according to colour requirements and operating temperature, which is managed by a discrete cooling system. With stability guaranteed, multiple lasers are free to unleash awesome colour with luxuriant reds and pure blues taking the viewer closer to the artist’s intention.

Specifications table

Projector type3-Chip DLP™ projector
DLP™ Chip | Panel Size24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
DLP™ Chip | Display MethodDLP™ chip x 3, DLP™ projection system
DLP™ chip | Number of Pixels2,304,000 (1920 x 1200 pixels) x 3
Light SourceLaser diodes (Blue LD, Red LD)
Light output30,500 lm*1 /32,000 lm (Center)*2
Time until light output declines to 50 %*320,000 hours (NORMAL)
ResolutionWUXGA (1920 x 1200 pixels)

Product series

PT-RQ35K Series

 
PT-RQ35K Series
Model
Lens test
±20 % (±15 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW200, ±12 % with ET-D75LE95, +25 %, 0 % with ET-D3LEU100) (powered)
Projector Type
3-Chip DLP™ projector
DLP™ Chip | Panel Size
24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
DLP™ Chip | Display Method
DLP™ chip x 3, DLP™ projection system
DLP™ chip x 3, DLP™ projection system
DLP™ chip | Number of Pixels
2,304,000 (1920 x 1200 pixels) x 3
2,304,000 (1920 x 1200 pixels) x 3
Brightness
30,500 lm*1 /32,000 lm (Center)*2
Light Source
Laser diodes (Blue LD, Red LD)
Laser diodes (Blue LD, Red LD)
Time until light output declines to 50 %
20,000 hours (NORMAL)
Resolution
WUXGA (1920 x 1200 pixels)
Contrast Ratio
20,000:1 (Full On/Full Off, Dynamic Contrast [3])
20,000:1 (Full On/Full Off, Dynamic Contrast [3])
Screen Size
1.78–25.4 m (70–1,000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95
1.78–25.4 m (70–1,000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95
Center-to-corner zone ratio
90 %
90 %
Lens
Optional (no lens included with this model)
Optional (no lens included with this model)
Lens shift | Horizontal(From the origin point of the lens mounter)
±20 % (±15 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW200, ±12 % with ET-D75LE95, +25 %, 0 % with ET-D3LEU100) (powered)
±20 % (±15 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW200, ±12 % with ET-D75LE95, +25 %, 0 % with ET-D3LEU100) (powered)
Lens shift | Vertical(From the origin point of the lens mounter)
±55 % (+78 %, +68 % with ET-D75LE95, ±48 % with ET-D3LEW200, ±44 % with ET-D75LE6/ET-D3LEW60) (powered)
±55 % (+78 %, +68 % with ET-D75LE95, ±48 % with ET-D3LEW200, ±44 % with ET-D75LE6/ET-D3LEW60) (powered)
Installation
Ceiling/floor, front/rear, free 360-degree installation
Terminals | SDI In
BNC x 1: 3G/HD-SDI input
Terminals | HDMI In
HDMI x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input*5 )
Terminals | DVI-D In
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP) (Single-link only)
Terminals | Multi Projector Sync In
BNC x 1
Terminals | Multi Projector Sync Out
BNC x 1
Terminals | Serial In
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | Serial Out
D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals | Remote 1 In
M3 stereo mini-jack x 1 for wired remote control
Terminals | Remote 1 Out
M3 stereo mini-jack x 1 for link control
M3 stereo mini-jack x 1 for link control
Terminals | Remote 2 In
D-sub 9-pin (female) x 1 for external control (parallel)
Terminals | DIGITAL LINK
RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5
RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5
Terminals | LAN
RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals | USB
USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series)/USB Memory Stick
USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series)/USB Memory Stick
Terminals | DC Out
USB Type A x 2 (for power supply, DC 5 V total of 2 A)
Terminals | Expansion Slot
SLOT (one terminal, vacant) for interface boards, SLOT NX compatible
Power Supply
AC 200 V–240 V (Light output will decrease when using the projector with AC 100 V to AC 120 V)
AC 200 V–240 V (Light output will decrease when using the projector with AC 100 V to AC 120 V)
Power Consumption
2,550 W (Standby: 14 W)
2,450 W (Standby: 13 W)
Operating Environment
Operating temperature: 0–45 °C (32–113 °F*7), operating humidity: 10–80 % (no condensation)<p class="MsoNormal"><span lang="EN-US" style="font-family:&quot;Meiryo UI&quot;"><o:p></o:p></span></p>
Operating temperature: 0–45 °C (32–113 °F*7), operating humidity: 10–80 % (no condensation)
Dimensions
<span lang="EN-US" style="font-size:10.5pt;mso-bidi-font-size:&lt;br /&gt; 11.0pt;font-family:&quot;Meiryo UI&quot;;mso-bidi-font-family:&quot;Times New Roman&quot;;&lt;br /&gt; mso-bidi-theme-font:minor-bidi;mso-ansi-language:EN-US;mso-fareast-language:&lt;br /&gt; JA;mso-bidi-language:AR-SA">Approx. 598 x 353 x 780 mm (23 17/32˝ x 13 29/32˝ x 30 23/32˝ ) (not including protruding parts) </span>
Approx. 598 x 353 x 780 mm (23 17/32˝ x 13 29/32˝ x 30 23/32˝ ) (not including protruding parts)
Weight
68.6 kg (151.2 lbs)
Applicable Software/Application
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™

Accessories & Software

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEW200

Zero Offset Ultra Short Throw Fixed-Focus Lens

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEU100

Project in tight spaces from very short throw-distances. With zero offset capability, these two lens options widen the versatility of Panasonic’s 3-Chip DLP™ lineup.

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LET40

4.94-7.94:1 for PT-RQ32K/RQ22K (16:10 aspect ratio) 4.61-7.41:1 for PT-RZ31K/RZ21K (16:10 aspect ratio) 4.99-8.02:1 for PT-RS30K/RS20K (4:3 aspect ratio)

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LET30

2.4 - 4.7:1 throw ratio (WUXGA) Zoom Lens for 3-Chip DLP Projectors

Showing 4 of 17

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

Showing 1 of 1

Interface board/conversion cable

ET-MDNDV10

DVI-D input signal board

Interface board/conversion cable

ET-MDN12G10

12G-SDI signal board

Interface board/conversion cable

ET-MDNFB10

ET-MDNFB10

Showing 3 of 3

Early Warning System

ET-SWA100

Monitors projectors and displays through intranet and detects or predicts abnormality or symptoms of trouble. Minimizes downtime and saves time and costs.

Showing 1 of 1

Early Warning System

ET-SWA100

Monitors projectors and displays through intranet and detects or predicts abnormality or symptoms of trouble. Minimizes downtime and saves time and costs.

Showing 1 of 1

Related resources

Showing 4 of 6

Showing 4 of 14