6,000 lm LCD laser projector

PT-VMZ6ST

Reduce Shadows,Enhance Flexibility with Eco-Friendly Short-Throw Projection

View full specifications Share page

Key features

Stress-free Installation Adapts to Various Layouts

Clear Projection in Bright Spaces

Eco-Friendly Design

	PT-VMZ7ST	PT-VMZ6ST
Brightness	7,000 lm¹ / 7,000 lm (ANSI)²	6,200 lm¹ / 6,200 lm (ANSI)²
Resolution	WUXGA	WUXGA
Throw ratio	0.797–1.01:1	0.797–1.01:1

^{Note: Product availability varies by country or region.}

^{1 Measurement, measuring conditions, and notation methods comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.}
^{2 Measurement, measuring conditions, and notation methods comply with American National Standards Institute standards. Value is the average of all products when shipped.}
^{3 4K input signals are converted to the projector’s resolution (1920 x 1200 pixels) upon projection. YP}_^B^P_^R^{4:2:0 format only for 4K/30p signals input via DIGITAL LINK.}
^{4 Requires the optional AJ-WM50 Series Wireless Module (sold separately).}
^{5 The displayed values are based on the results of angle sensor detection and may differ from the actual projection angle. They are for reference only, and accuracy is not guaranteed.}
^{6 Supported on identical models only. Excludes passwords, projector name/ID, and network settings.}
^{7 Full On/Full Off, when [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1]. Measurement, measuring conditions, and notation method comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.}
^{8 By total weight of plastic parts in the projector main unit. Excludes projection lenses, printed circuit boards, labels, cables, connectors, electronic components, optical components, ESD components, EMI component adhesives, and coatings.}
^{9 Around this time, the light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of particulate matter). The estimated time until light output declines to 50 % varies depending on the environment. Filter cleaning cycle: 20,000 hours (under dust conditions of 0.08 mg/m3), 10,000 hours (under dust conditions of 0.15 mg/m3).}
^{10 Settings cannot be made when [STANDBY MODE] is set to [ECO] or when [IN STANDBY MODE] is set to [ON] in the [AUDIO SETTINGS] menu. Auto Power On is supported when the input signal is transmitted via HDMI™ or COMPUTER IN terminals.}

Stress-free Installation Adapts to Various Layouts

Project vivid 100-inch images from 1.72 m (5.6 ft) with minimal shadowing in tight spaces. Powered focus eliminates manual adjustment hassle, while 1.2x zoom, V/H lens shift, and 6-Point Screen Correction enhance layout flexibility. Grid, Angle Monitor⁵, and data-cloning⁶ via LAN/USB further streamline installation.

Learn more

Clear Projection in Bright Spaces

Enjoy bright, sharp, and realistic visuals with up to 7,000 lm¹ brightness, 3,000,000:1⁷ Dynamic Contrast, and Daylight View Basic, which optimizes image quality in any lighting. Advanced color adjustment enables precise fine-tuning for vibrant reproduction—ideal for golf simulators or digital museum displays.

Learn more

Eco-Friendly Design

The projector body’s plastic contains about 56%⁸ recycled resins, reducing the usage of virgin materials. The laser light source and long-life ECO Filter need no maintenance for 20,000 hours⁹, reducing cost and waste. Auto Power On¹⁰ conserves energy, and built-in scheduling supports automated operation, saving resources.

Learn more

Bright, Efficient, and Flexible Performance

Discover the VMZ7ST Series: compact, eco-friendly short-throw projectors to fit diverse applications, from offices and classrooms to golf simulators and digital museums. Delivering vivid, shadow-free visuals up to 250 inches, its high brightness and customizable color adjustment bring content to life. With resource-friendly features, the series integrates into any layout, exceeding your expectations for stable, efficient, and reliable long-term operation.

Stress-free Installation Adapts to Various Layouts

Short-Throw Lens with Powered Focus via Remote Control

Unlock stunning visuals in compact spaces. The VMZ7ST Series’ 0.797–1.01:1 throw ratio projects large images up to 250 inches while minimizing shadows from presenters or guests. Powered focus offers swift adjustment via remote control without the hassle of manual adjustment in hard-to-reach locations.

Installation Freedom: 1.2x Optical Zoom and Wide-Range Shift

Enjoy greater installation flexibility thanks to the 1.2x optical zoom, which provides about 460 mm (18.05 inches) of mounting distance adjustment¹ to avoid ceiling obstacles. The projector offers +50% vertical and ±20% horizontal lens shift, accommodating off-axis or high mounting positions while maintaining image geometry. This adaptability is ideal for challenging layouts where the optimal projector position isn’t available.

_{1 When projecting a 100-inch image.}

Digital Zoom Extender: Installation Freedom for Any Layout

Digital Zoom Extender and Digital Image Shift functions are useful when the desired mounting position is too far from the screen, or on-axis placement is impractical. Digital Image Shift supports 10% image shift in any direction, enabling off-axis or high-ceiling mounting. Digital Zoom Extender lets you retain your previous projector’s mount position by extending the throw distance beyond the optical zoom range, saving construction work.

_{Note: Resolution decreases when using Digital Zoom Extender and Digital Image Shift, and Digital Image Shift reduces image size to 80%. Some screen correction functions are unavailable when using this function. Using the same projector mounting position may not be possible in every situation.}

PT-VMZ7ST Series - Digital Zoom Extender- Installation Freedom for Any Layout

Quickly Find the Projection Angle with Angle Monitor

Aligning the projection angle with the design simulation can be challenging and usually requires two people. The VMZ7ST Series features a built-in angle sensor that detects changes in the projector’s pitch and roll angles, which are graphically displayed in the OSD settings menu. Installers can adjust the projection angle without needing assistance.

_{Note: The displayed values are based on the results of angle sensor detection and may differ from the actual projection angle. They are for reference only, and accuracy is not guaranteed.}

PT-VMZ7ST Series - Quickly Find the Projection Angle with Angle Monitor

Correct Localized Distortion with Grid

Operable via remote control, Free Grid offers pinpoint correction of localized distortion on the screen caused by obstructions. Users can select grids ranging 17 x 11 lines, enabling point-by-point and line-based batch corrections. Correction data is saved when grid or point numbers are changed for seamless transitions from basic to detailed adjustments.

Flexible 6-Point collection

The VMZ7ST Series features 8-Point Screen Adjustment, which allows you to remove trapezoidal distortion when projecting from an angle using the 4-Corner and H/V Keystone Correction functions. Additional control points at the top and bottom of the screen can be used to remove distortion when projecting into a corner.

Built-in Geometric Adjustment Functions

Geometric Adjustment includes essential tools for correcting image distortion when projecting at angles or onto curved and irregular surfaces. It supports spherical, cylindrical, and complex screen shapes without a connected PC. Features such as Maintain Aspect Ratio and Independent Corner Adjustment simplify the correction process. Additionally, users can save and reapply adjustment settings, making it easy to manage corrections and track progress.

Single-Cable 4K DIGITAL LINK Solution

4K DIGITAL LINK is a connection based on HDBaseT™ that supports long-distance video, audio, and control-signal transmission via a single CAT 5e LAN cable, reducing installation complexity in large venues with a remote server room.

_{Note: 4K input signals are converted to the projector’s resolution (1920 x 1200 pixels) upon projection. YPBPR 4:2:0 format only for 4K/30p input via DIGITAL LINK.}

Accepts 4K Signals via HDMI™ and DIGITAL LINK

The VMZ7ST Series accepts 4K¹ video signals via DIGITAL LINK and HDMI™ terminals, simplifying projector integration into your existing infrastructure. This capability enables 4K¹ signal transmission to display endpoints with varying screen resolutions, eliminating the need for external converters or content re-encoding.

_{1 4K input signals are converted to the projector’s resolution (1920 x 1200 pixels) upon projection. YPBPR 4:2:0 format only for 4K/30p signals input via DIGITAL LINK.}

Supports Next-Generation Control Protocols

Dedicated LAN terminal and DIGITAL LINK connections support the latest protocols, including IPv6, Art-Net DMX, PJLink™ (Class 2), Crestron Connected® V2, Crestron® XiO Cloud, and Extron XTP®. The projector also includes an emulation function to ensure compatibility with legacy management software.

_{Note: Requires projector firmware Ver. 2.00 or higher. The optional AJ-WM50 Series Wireless Module does not support IPv6.}

Data Cloning Function via LAN or USB Memory Devices

Applying the same adjustments to each projector in your fleet can be time-consuming. To expedite this task, the VMZ7ST Series features a data cloning function that allows main projector settings, including saved adjustment data, to be copied to sub-projectors via LAN or USB flash memory device.

_{Note: Supported on identical models only. Excludes passwords, projector name/ID, and network settings. Data can be copied to a maximum of 99 sub-projectors via LAN.}

Clear Projection in Bright Spaces

Enhance Visual Impact with Striking Graphics

The VMZ7ST Series features a high-efficiency optical engine that delivers up to 7,000 lm¹ brightness, ensuring vibrant, consistently beautiful visuals even on large screens. Its 3,000,000:1 contrast ratio² boosts the impact of colorful content, providing depth and dimensionality essential for an engaging viewing experience.

_{1 PT-VMZ7ST only. When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. Measurement, measuring conditions, and notation method comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.}

_{2 Full On/Full Off, when [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1]. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.}

Dynamic Contrast Adds Depth and Impact

Dynamic Contrast analyzes the input signal frame-by-frame and uses scene-linking to digitally adjust light output based on each scene’s contrast requirements. The technology accurately reproduces challenging content where light and dark scenes frequently interchange. Enjoy clearer detail in shadows with deeper blacks, brighter whites, and more vibrant colors.

Color Adjustment for Tailored Reproduction

The VMZ7ST Series introduces a new color adjustment system that allows precise hue, saturation, and color value adjustment across all RGBMYC axes. You can effectively fine-tune color expression to match specific content or environment. Whether enhancing the lush greens of a golf course or accurately reproducing a digital artwork palette, this technology gives you the control needed to create a bold, impactful experience.

Image Brilliance in Bright Spaces

Daylight View Basic uses a sensor to measure ambient light levels in your space and adjusts sharpness, halftone color, contrast, and brightness to optimize image visibility regardless of room illumination. The result is a clearer, more detailed image, even in challenging conditions.

Eco-Friendly Design

Features Eco-Friendly Recycled Materials

The plastics used in the main projector body contain about 56%¹ recycled resins, reducing the utilization of virgin materials. Recyclable cardboard insulation replaces foam in the shipping carton, and unnecessary packaging materials have been eliminated to reduce waste. By supporting eco-friendly manufacturing and recycling-based programs at end-of-life, you can help reduce your organization’s environmental impact.

_{1 By total weight of plastic parts in the projector main unit. Excludes projection lenses, printed circuit boards, labels, cables, connectors, electronic components, optical components, ESD components, EMI component adhesives, and coatings.}

No Light-Source Maintenance for 20,000 Hours¹

The VMZ7ST Series offers more than consistent, long-lasting picture quality. Its laser light source also operates for about 20,000 hours¹ without maintenance, outperforming lamp projectors that require several lamp replacements over the same period. This reduces operating costs and eliminates mercury lamp disposal.

_{1 Around this time, the light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m³ of particulate matter). The estimated time until light output declines to 50 % varies depending on the environment.}

Long-Life ECO Filter Reduces Downtime

ECO Filter includes a Micro-Cut Filter that collects minute dust particles with an electrostatic effect. With the dust-resistant projector cabinet design, ECO Filter enables low maintenance and long-term use with less downtime. Filter replacement is recommended at about 20,000 hours¹ when used in typical commercial environments. If it’s necessary to maintain the filter before then, it can be washed and reused², reducing waste, cost, and labor.

_{1 Filter cleaning cycle: 20,000 hours (under dust conditions of 0.08 mg/m³), 10,000 hours (under dust conditions of 0.15 mg/m³).}

_{2 Filter can be washed and reused up to two times. When washing the filter with water, please follow the procedures listed in the operating instructions.}

Auto Power On Function Limits Energy Waste

Panasonic laser projectors can enter Quick Startup standby mode after a certain period without an input signal, allowing playback to resume swiftly. However, if no signal is detected before the Quick Startup timer expires, the projector shuts down and must be powered on again manually. The VMZ7ST Series resolves this with Auto Power On. This feature automatically powers up the projector and resumes playback when an input signal is detected, even after the projector has shut down, minimizing interruptions and conserving energy.

_{Note: Settings cannot be made when [STANDBY MODE] is set to [ECO] or when [IN STANDBY MODE] is set to [ON] in the [AUDIO SETTINGS] menu. Auto Power On is supported when the input signal is transmitted via HDMI™ or COMPUTER IN terminals.}

PT-VMZ7ST Series - Auto Power On Function Limits Energy Waste

Dual HDMI™ Inputs Support CEC Command-Compatible Signals

Both HDMI™ inputs support Consumer Electronics Control (CEC) command-compatible signals from compatible devices. This feature allows limited projector control via the source device, streamlining operation.

_{Note: The link control may not operate normally depending on the connected CEC command-compatible device.}

Effortless Automation with Built-In Scheduling

The VMZ7ST Series introduces a new scheduling feature accessed via the OSD settings menu. You can program the projector to perform automated actions, including power on/off, shutter activation, and input selection, at specific times throughout the week. This functionality streamlines operations, reduces manual labor, and optimizes resource management.

Works with Multi Monitoring & Control Software

The VMZ7ST Series is compatible with Multi Monitoring & Control Software, enabling management of up to 2,048 display devices from a remote PC over LAN. The software facilitates status monitoring, device control, playlist delivery, playback scheduling, and system-map visualization. For more information, please visit our software information webpage.

Other Features

Supports widescreen 21:9 and 27:9 input signals
Wireless projection with optional AJ-WM50 Series Wireless Module
Shutter function and Auto Image Rotation function
Quick On/Quick Off and Direct Power Off
Audible remote control feedback for projector on/off
Security slot and customizable startup logo
USB port for DC 5 V/2 A power supply, data transfer, and optional wireless module
Compatible with the Multiple PJ Firmware Batch Update Tool
Presentation Support System
Multi-Screen Support System
Multi-Unit Brightness and Color Control
DICOM Simulation Mode

Specifications table

Projector type	LCD projectors
LCD Panel \| Panel Size	16.3 mm (0.64 in) diagonal (16:10 aspect ratio)
LCD Panel \| Display Method	Transparent LCD panel (x 3, R/G/B)
LCD Panel \| Pixels	2,304,000 (1920 x 1200) pixels
Light Source	Laser diode
Light output*1	6,200 lm2 / 6,200 lm (ANSI)3

View full specifications

Accessories & Software

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

View product

Key Features
Long-distance DIGITAL LINK transmission of up to 150 m through a single LAN cable
Lower cabling costs and reduced wiring complexity
Self-contained with integrated splitter, switcher, scaler, and DIGITAL LINK conversion technology
Connect multiple ET-YFB200G switchers to accommodate extra display devices
Compact half-rack dimensions

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

View product

Key Features
Long-distance DIGITAL LINK transmission of up to 150 m through a single LAN cable
Lower cabling costs and reduced wiring complexity
Self-contained with integrated splitter, switcher, scaler, and DIGITAL LINK conversion technology
Connect multiple ET-YFB200G switchers to accommodate extra display devices
Compact half-rack dimensions

Showing 1 of 1

Brackets

ET-PKV400B

The Bracket assembly is designed for compatibility with PT-VZ575N/VZ570/VW535N/VW530/VX605N/VX600/VW350/VW355N/VX420/VX425N projectors.

View product

Brackets

ET-PKL100H

The High ceiling mount bracket is designed for compatibility with ET-PKL420B/PKL430B/PKV400B projectors.

View product

Brackets

ET-PKL100S

The Low ceiling mount bracket is designed for compatibility with PT-TW341R, PT-TW340, PT-TW250, PT-TX400, PT-VZ575-Series, VW350/VW355N/VX420/VX425N, FZ570/FW530 PT-LB360, PT-LB330, PT-LW330, PT-LB280 projectors.

View product

Showing 3 of 3

Metadata Handling

AJ-WM50P

The AJ-WM50 is the dual band, compact wireless module for P2HD and AG-DVX200 camera recorders.

The WM50 dual band (2.4GHz and 5GHz) makes for a more reliable, stable connection to a network in various environments yet its compact size enables it to fit in the wireless module compartment of the P2HD cameras. 2.4GHz offers strong connection through obstacles and compatible with many devices whereas 5GHz offers stability from radio wave interference (Microwave, Bluetooth, etc).

View product

Key Features
Compact size, fits inside camera body same as WM30.
Dual Band 2.4GHz and 5GHz (IEEE802.11 a/b/g/n/ac compliant)
High security WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/AES), WEP (64 bit/128 bit)

Showing 1 of 1

Metadata Handling

AJ-WM50P

The AJ-WM50 is the dual band, compact wireless module for P2HD and AG-DVX200 camera recorders.

The WM50 dual band (2.4GHz and 5GHz) makes for a more reliable, stable connection to a network in various environments yet its compact size enables it to fit in the wireless module compartment of the P2HD cameras. 2.4GHz offers strong connection through obstacles and compatible with many devices whereas 5GHz offers stability from radio wave interference (Microwave, Bluetooth, etc).

View product

Key Features
Compact size, fits inside camera body same as WM30.
Dual Band 2.4GHz and 5GHz (IEEE802.11 a/b/g/n/ac compliant)
High security WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/AES), WEP (64 bit/128 bit)

Showing 1 of 1

PressIT

TY-WPS1 series

“PressIT” is Panasonic’s Wireless Presentation System that allows easy screen collaboration with just a single press of a button. This elegant solution, designed to make collaboration quick and simple in meeting rooms, can connect up to 32 devices at one time, allowing users to present on screen or via a projector at the touch of a button..

View product

Key Features
For video and audio signals from PCs, iOS/Android, and other mobile devices
Two types of receivers: Set top box compatible with all displays and projectors, SDM board for SQ1 and SQE1 displays
Compatible with HDMI-CEC command control, linked operation with CEC compatible devices
Up to 4 simultaneous display sources, and up to 32 Transmitter simultaneous connections
No need for software and driver installation or network connection

Showing 1 of 1

Projector type	LCD projectors
LCD Panel \| Panel Size	16.3 mm (0.64 in) diagonal (16:10 aspect ratio)
LCD Panel \| Display Method	Transparent LCD panel (x 3, R/G/B)
LCD Panel \| Pixels	2,304,000 (1920 x 1200) pixels
Light Source	Laser diode
Light output*1	6,200 lm2 / 6,200 lm (ANSI)3
Time until light output declines to 50 %*4	20,000 hours (NORMAL/QUIET), 24,000 hours (ECO)
Resolution	WUXGA (1920 x 1200 pixels)
Contrast Ratio*2	3,000,000:1 (Full On/Full O) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1].)
Screen size [diagonal]	2.03–6.35 m (80–250 in), 16:10 aspect ratio
Center-to-corner zone ratio*2	85 %
Lens	1.2x manual zoom (throw ratio: 0.797–1.01:1), powered focus, F 1.53–1.66, f 11.3–14.2 mm
Digital Zoom Extender*5	Throw Ratio 0.797–1.27:16 (Corresponding value. When used together with optical zoom.)
Lens shift \| Horizontal(From the origin point of the lens mounter)	±20 %
Lens shift \| Vertical(From the origin point of the lens mounter)	+50%
Keystone Correction Range	Vertical ±25 %, Horizontal ±35 %
Terminals \| HDMI 1/2 IN	HDMI™ 19-pin x 2 (Compatible with HDCP, Deep Color, 4K/30p7 signal input), CEC supported8
Terminals \| Computer In	D-sub 15-pin (female) (RGB/YPBPR/YCBCR) AUDIO IN
Terminals \| Audio In	M3 stereo mini-jack x 1
Terminals \| Audio Out	M3 stereo mini-jack x 1
Terminals \| Serial In	D-sub 9-pin (female) x 1 for computer control (RS-232C compliant)
Terminals \| DIGITAL LINK/LAN	RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], HDCP, Deep Color, 4K/30p*7 signal input)
Terminals \| LAN	RJ-45 x 1 for network control, 10Base-T, 100Base-TX, compatible with PJLink™ [Class 2]
Terminals \| USB(VIEWER/WIRELESS/DC OUT)	USB connector (Type A) x 1 for Memory Viewer function, optional AJ-WM50 Series Wireless Module, power supply (DC 5 V, maximum 2 A*9)
Protocol versions	IPv4, IPv6*10
Power Supply	AC 100 V–240 V, 50/60 Hz
Maximum power consumption*11	368 W (4.0–1.7 A) (395 VA) (TBD) (Power consumption is 358 W at 200–240 V)
Power consumption*11 \| On-mode power consumption(Operating mode) )[Normal]	355 W (100–240 V), 345 W (200–240 V) (TBD)
Power consumption*11 \| On-mode power consumption(Operating mode) )[ECO]	275 W (100–240 V), 265 W (200–240 V) (TBD)
Power consumption*11 \| On-mode power consumption(Operating mode) )[QUIET1]	320 W (100–240 V), 310 W (200–240 V) (TBD)
Power consumption*11 \| On-mode power consumption(Operating mode) )[QUIET2]	270 W (100–240 V), 260 W (200–240 V) (TBD)
Built in Speaker	10 W monaural
Cabinet Materials	Molded plastic
Filter*12	Included (Estimated maintenance time: approx. 20,000 hours)
Operation Noise*2	35 dB (NORMAL), 35 dB (ECO), 30 dB (QUIET 1), 25 dB (QUIET 2) (TBD)
Dimensions (W x H x D)	414 x 120 x 424 mm (16 5/16˝ x 4 23/32˝ x 16 11/16˝ ) (not including protruding parts), 414 x 167 x 424 mm (16 5/16˝ x 6 9/16˝ x 16 11/16˝ ) (with feet at shortest position)
Weight*13	Approx. 8.3 kg (18.30 lbs) (TBD)
Operating Environment	Operating temperature: 0–45 °C (32–113 °F)14, 15, Operating humidity: 20–80 % (no condensation)
Applicable Software	Multi Monitoring & Control Software, Presenter Light Software for Windows®16, Wireless Projector App for iOS/Android™17

6,000 lm LCD laser projector

PT-VMZ6ST

Key features

Stress-free Installation Adapts to Various Layouts

Clear Projection in Bright Spaces

Eco-Friendly Design

Bright, Efficient, and Flexible Performance

Stress-free Installation Adapts to Various Layouts

Short-Throw Lens with Powered Focus via Remote Control

Installation Freedom: 1.2x Optical Zoom and Wide-Range Shift

Digital Zoom Extender: Installation Freedom for Any Layout

Quickly Find the Projection Angle with Angle Monitor

Correct Localized Distortion with Grid

Flexible 6-Point collection

Built-in Geometric Adjustment Functions

Single-Cable 4K DIGITAL LINK Solution

Accepts 4K Signals via HDMI™ and DIGITAL LINK

Supports Next-Generation Control Protocols

Data Cloning Function via LAN or USB Memory Devices

Clear Projection in Bright Spaces

Enhance Visual Impact with Striking Graphics

Dynamic Contrast Adds Depth and Impact

Color Adjustment for Tailored Reproduction

Image Brilliance in Bright Spaces

Eco-Friendly Design

Features Eco-Friendly Recycled Materials

No Light-Source Maintenance for 20,000 Hours1

Long-Life ECO Filter Reduces Downtime

Auto Power On Function Limits Energy Waste

Dual HDMI™ Inputs Support CEC Command-Compatible Signals

Effortless Automation with Built-In Scheduling

Works with Multi Monitoring & Control Software

Other Features

Specifications table

Accessories & Software

ET-YFB200G

ET-YFB200G

ET-PKV400B

ET-PKL100H

ET-PKL100S

AJ-WM50P

AJ-WM50P

TY-WPS1 series

Related resources

Connect with Panasonic Visual

No Light-Source Maintenance for 20,000 Hours¹