AK-UCU700 series

Key Features
1/5-type rack size remote operation panel
Colour LCD display allows GUI operation, and also supports PoE* and IP control
Camera serial control and IP control (RJ45 LAN cable) are supported.
Can be used for remote control of Panasonic studio camera, camera recorders, convertible cameras, and HD integrated cameras.
Functions for studio camera scene file store and load.
SD memory card slot for saving user files, scene file and updating firmware versions.
The robust LAN connector.

Key Features
1/5-type rack size remote operation panel
Colour LCD display allows GUI operation, and also supports PoE* and IP control
Camera serial control and IP control (RJ45 LAN cable) are supported.
Can be used for remote control of Panasonic studio camera, camera recorders, convertible cameras, and HD integrated cameras.
Functions for studio camera scene file store and load.
SD memory card slot for saving user files, scene file and updating firmware versions.
The robust LAN connector.

Full specifications

LAN	1 line,
Weight	AK-UCU700: Approx. 9.1 kg (20.1 lb), AK-UCU710: Approx. 9.3 kg (20.5 lb)
Dimensions (W x H x D)	424 mm x 88.5 mm x 400 mm (16-5/8 inches x 3-1/2 inches x 15-3/4 inches) (excluding protrusions)
Operating Temperature	0 ℃ to 40 ℃ (32 °F to 104 °F)
Power Consumption	550 W (Without camera connected: 130 W)
AUX Output	3G/HD-SDI 1 line
Video Output	3G/HD-SDI 5 lines 12G/6G/3G/HD-SDI 2 lines HD-SDI 1 line
Communication	Intercom input/output (ENG / PROD, 0 dBm, 600 Ω (4 W) / 1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM) : 2 lines*2 PGM input (0 dBm/600 Ω) : 2 lines Tally input (Red, Green, Yellow) : 1 input each
Humidity	10 % to 90 % (no condensation)
Power Supply	100 V - 240 V AC, 50 Hz/60 Hz
Capacity for Supplying Power to a Camera	240 V AC , 1.46 A , 50 Hz / 60 Hz
Microphone Output	0 dBm/600 Ω, 2 lines (XLR, 3-pin, male)
MSU	RS-422 1 line, GPI for control
LAN Trunk	1 line,
Reference Input	BB (black burst) / tri-level*1: 1 line (automatic termination, connect to upper connector; BB signal and tri-level signal automatically recognized, with loop-through output)
Return Input	3G/HD-SDI 4 lines
Tally Output	Tally Output (Red, Green), Alarm Output, Open collector output each
SFP+/SFP28 1, 2	AK-UCU710: SFP+/SFP28 slot* x 2 (for ST 2110 connection), AK-UCU700: SFP+/SFP28 slot* x 2 (for ST 2110 connection) when AK-NP701G (sold separetely) is installed.
Dante®	AK-UCU710: RJ45 x 2 (Primary/Secondary), AK-UCU700: RJ45 x 2 (Primary/Secondary) when AK-NP702G (sold separetely) is installed.
STREAM	RJ45 x 1 (for IP video streaming, SRT, and NDI®^4 ) When AK-NP703G (sold separately) is installed.
HD Trunk Output	3G/HD-SDI 1 line
HD TRUNK (PROMPTER) Input	3G/HD-SDI 1 line
ROP	RS-422 1 line, 16 V DC output
Note	1: First studio camera system to support Dante®, NDI®4 and SRT audio networks as of October 2023, according to Panasonic Connect research. 2: Standard in AK-UCU710/UCU710S and optional in AK-UCU700/UCU700S (requires ST 2110 interface board AK-NP701 sold separately). 3: Standard in AK-UCU710/UCU710S and optional in AK-UCU700/UCU700S (requires Dante® interface board AK-NP702 sold separately). 4: New protocol developed by NewTek, Inc. that supports IP video production workflow. NDI® is a registered trademark of Vizrt NDI AB in the United States and other countries. 5: Requires AK-NP703 streaming interface board sold separately. 6: When power is supplied from CCU. 7: When using AK-UC4000 or AK-UC3300 4K studio camera (Future support planned). 2x may vary depending on connected studio camera. 8: When using studio camera currently under development. 9: AK-UCU700 requires optional AK-NP701 interface board for SFP28 connection.

Camera Control Unit (CCU)

AK-UCU700 series

Key features

Product gallery

Accessories & Software

AK-HRP1015

AK-HRP1015

Related resources