Mainframe (AV-HS450U1N/E) | |
---|
General | |
---|
Power Supply | AC 100 V to 120 V, 50/60 Hz
• Redundant power supply standard supported |
---|
Power Consumption | 120 W |
---|
Ambient Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
---|
Humidity | 10 % to 90 % (no condensation) |
---|
Dimensions (W x H x D) | 2RU size 482 x 88 x 471 mm (19˝ x 3-7/16˝ x 18-9/16˝)
[excluding protrusions] |
---|
Weight | 9.8 kg (21.605 lbs.)
[excluding accessory parts when no options have been installed]
10.3 kg (22.707 lbs.)
[excluding accessory parts when all the possible options have been installed] |
---|
Video Terminal | |
---|
Video Inputs (20 Signal Lines, Maximum) | Standard SDI: 16 signal lines BNC x 16 (IN1 to IN16)
Optional: Up to 4 additional signal lines
(IN A1, IN A2, IN B1, IN B2)
(Up to two option boards can be installed in the two input/output slots.) |
---|
Video Outputs (10 Signal Lines, Maximum) | Standard SDI: 4 signal lines BNC x 5 (OUT1 to OUT4 x 1 line each, 2 distributed outputs for OUT1 only)
Standard DVI-D: 2 signal lines DVI-D x 2 (OUT5, OUT6)
Optional: Up to 4 additional lines (OUT A1, OUT A2, OUT B1, OUT B2)
(Up to two option boards can be installed in the two input/output slots.)
• PGM, PVW, AUX1 to AUX4, MV1 (MULTI_PVW1), MV2 (MULTI_PVW2), CLN and KEYOUT can be allocated to each output.
• CLN can be pre-selected from KEY, DSK1 or DSK2 using a menu. |
---|
Signal Formats | SD: 480/59.94i, 576/50i
HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF*, 1080/23.98PsF* *The following option boards are not supported: AV-HS04M1, AV-HS04M2, AV-HS04M3, AV-HS04M4, AV-HS04M5, AV-HS04M6,AV-HS04M7, AV-HS04M7D |
---|
Signal Processing | Y:Cb:Cr 4: 2: 2, 10 bit (8 bits for frame memory)
RGB 4:4:4, 8 bit |
---|
ME Number | 1ME |
---|
SDI Inputs | HD: Serial digital component (SMPTE 292M)
SD: Serial digital component (SMPTE 259M)
16 signal lines, standard: IN1 to IN16
20 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M1 boards are used; with active through)
HD [SMPTE 292M (BTA S-004B) standard complied with]
• 0.8 V [p-p] ±10 % (75 Ω)
• Input return loss More than 15 dB (5 MHz to 750 MHz) More than 10 dB (750 MHz to 1.5 GHz)
• Automatic equalizer 100 m (328 ft.) (when 5C-FB cable is used)
SD [SMPTE 259M standard complied with]
• 0.8 V [p-p] ±10 % (75 Ω)
• Input return loss More than 15 dB (5 MHz to 270 MHz)
• Automatic equalizer 200 m (656 ft.) (when 5C-2V cable is used) |
---|
SDI Outputs | HD: Serial digital component (SMPTE 292M)
SD: Serial digital component (SMPTE 259M)
4 signal lines, standard: OUT1 x 2; OUT2, OUT3, OUT4 x 1 each
8 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2
(When two AV-HS04M7 boards are used)
HD [SMPTE 292M (BTA S-004B) standard complied with]
• Output return loss: More than 15 dB (5 MHz to 750 MHz), More than 10 dB (750 MHz to 1.5 GHz)
• Output level: 0.8 V [p-p] ±10 % (75 Ω)
• Rise time: Less than 270 ps
• Fall time: Less than 270 ps
• Difference between rise ime and fall time: Less than 100 ps
• Alignment jitter: Less than 0.2 UI (130 ps)
• Timing jitter: Less than 1.0 UI
• Eye aperture ratio: More than 90 %
• DC offset: 0±0.5 V
SD [SMPTE 259M standard complied with]
• Output return loss: More than 15 dB (5 MHz to 270 MHz)
• Output level: 0.8 V [p-p]±10 % (75 Ω)
• Rise time: Less than 1.5 ns
• Fall time: Less than 1.5 ns
• Difference between rise time and fall time: Less than 0.5 ns
• Jitter: Less than 0.2 UI |
---|
Composite Input (Option) | Analog composite signal (NTSC/PAL) (1.0 V [p-p], 75 Ω)
4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2 (When two AV-HS04M6 boards are used; with loop-through) |
---|
Analog Input (Option) | SD/HD analog component Y/Pb/Pr (1.0 V [p-p], 75 Ω)
4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2 (When two AV-HS04M2 boards are used) |
---|
Analog Output (Option) | SD/HD analog component Y/Pb/Pr (1.0 V [p-p], 75 Ω)
4 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2 (When two AV-HS04M4 boards are used)
• 2 signal lines (OUT A1, OUT B1) when two AV-HS04M5 boards are used |
---|
DVI-I Input (Option) | Analog/digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024)
Vertical frequency: 60 Hz
4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2(When two AV-HS04M3 boards are used) |
---|
DVI-I Output (Option) | Analog/digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+*(1680 x 1050), UXGA* (1600 x 1200), WUXGA* (1920 x 1200) *Selectable only when digital signals are output
Vertical frequency: 60 Hz
2 signal lines, maximum: OUT A2, OUT B2(When two AV-HS04M5 boards are used) |
---|
DVI-D Input (Option) | Digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050),UXGA (1600 x 1200), WUXGA (1920 x 1200)
Vertical frequency: 60 Hz
Digital RGB: 1080/50P, 1080/59.94P
• This board is incompatible with the HDCP (High-bandwidth Digital Content Protection).
• Analog input signals are not supported.
4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2 (When two AV-HS04M8 boards are used)
• The DVI-I connector cable cannot be used.
• For the DVI-D connector cable, use a cable with a length of up to 5 m (16.4 ft.). |
---|
DVI-D Output | Digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200)
Vertical frequency: 60 Hz
Digital RGB: 1080/50P, 1080/59.94P
(The vertical frequency is the same as that of the system format. When the system format is 1080/23.98PsF or 24PsF, the images cannot be output.)
• Analog output signals are not supported.
• High-resolution multi view mode supported: Signals are also output with a high resolution even when SD has been selected as the system mode. With this mode setting, MV1 is output to OUT5 and MV2 to OUT6; MV1 and MV2 cannot be output to any other outputs.
2 lines, standard: OUT5, OUT6
• The DVI-I connector cable cannot be used.
• For the DVI-D connector cable, use a cable with a length of up to 5 m (16.4 ft.). |
---|
Synchronous Terminal | |
---|
Reference Input/Output | In gen-lock mode: Black burst or Tri-level Sync input signals (with loop-through)
In internal sync mode: Black burst output signals x 2
• Same field frequencies as those of the system formats supported
• With the 1080/23.98PsF and 24PsF formats, only GENLOCK mode supported
• With the 1080/23.98PsF format, black burst with 10F-ID (SMPTE318M standard met) or TRI signals supported |
---|
Video Delay Time | FS OFF, U/C OFF
1 line (H)
FS ON or U/C ON
1 frame (F)
• When the signals have passed through DVE, multi view, down-converter, DVI-IN or DVI-OUT, a maximum delay of 1 frame is applied in each case. |
---|
Control Terminal | |
---|
Panle | RJ45 x 1 100 Mbps
• When the control panel is connected |
---|
LAN | RJ45 x 1 100/10 Mbps
• Used for maintenance purposes |
---|
Editor | D-sub, 9-pin, female RS-422 control connector
• GVG standard protocol subset supported |
---|
COM | D-sub, 9-pin, female RS-422 control connector
• For Panasonic pan-tilt head system control, etc. |
---|
Tally/GPI | D-sub, 50-pin, female
INPUT: 8 inputs, general-purpose, photocoupler sensing
OUTPUT: 31 outputs; selected from R/G tally, general-purpose
ALARM: 1 output, open collector output (negative logic) |
---|
Control Panel (AV-HS450C1N/E) | |
---|
General (AV-HS450C1N/E) | |
---|
Power Supply (AV-HS450C1N/E) | DC 12 V, 0.8 A
• Redundant operation enabled by connecting two AC adapters
• Power consumption when using the AC adapter: AC 14 W |
---|
Ambient Operating Temperature (AV-HS450C1N/E) | 0 °C to 40 °C (32 °F to 104 °F) |
---|
Humidity (AV-HS450C1N/E) | 10 % to 90 % (no condensation) |
---|
(AV-HS450C1N/E) Dimensions (W x H x D) | 560 x 88 x 299 mm (22-1/16˝ x 3-7/16˝ x 11-3/4˝)
[excluding protrusions] |
---|
Weight (AV-HS450C1N/E) | 3.9 kg (8.598 lbs.) [excluding accessory parts] |
---|
Control Terminal (AV-HS450C1N/E) | |
---|
Mainframe | RJ45 x 1 100 Mbps
• For connecting the mainframe |
---|
Tally/GPI (AV-HS450C1N/E) | D-sub, 25-pin, female
INPUT: 8 inputs
OUTPUT: 8 outputs
ALARM: 1 output |
---|
Other | |
---|
SD Memory Cards | Memory size supported: Max. 32 GB
(SDHC memory cards supported)
Still image files: Load, save
Setup data: Backup |
---|
Accessories | Operating instructions, CD-ROM (Operating instructions/Image transmission software), AC adapters (for control panel), Power cords (for mainframe and AC adapter), CAT5E cable (STP, straight cable, 10 m (32.8 ft.) long) |
---|
Share page
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: