All-in-one LED Display

TL-110AD12AW

A 110-inch all-in-one LED display that boasts high operability, long-term stable operation, and flexible installation and expandability

View specifications Share page

Key features of TL-110AD12AW

Key features

All-in-one model optimized for ease of use

Long-term stable operation is possible

Flexible installation and expandability

	TL-165AD19AW	TL-137AD15AW	TL-110AD12AW
Screen size (Diagonal)	164.78-inch / 4185.5 mm	137.32-inch / 3487.9 mm	109.86-inch / 2790.3 mm
LED type/Pixel pitch	SMD / 1.90 mm	SMD / 1.58 mm	SMD / 1.27 mm
Brightness	700 cd/m²
Resolution (H x V)	1920 x 1080

Features

User-friendly all-in-one model designed for convenience

These all-in-one model comes with a set of necessary equipment, including a display, controller, power supply, and mounting hardware. It uses an LED module with a luminance of 700 cd/m² and a pitch of 1.58 mm (137″) / 1.90 mm (165″) to display highly visible images. Much like a commercial display, it can be easily set up and operated using a remote controller. In addition to the wide color gamut that is unique to LEDs, it also has a color gamut conversion function, so it can deliver images that express the appeal of the content to the effective extent, depending on the intended use.

Long-term operation with stability

The brightness and power are controlled to suit the installation environment and the images being displayed, ensuring visibility while reducing power consumption. Because it uses highly reliable parts, it can be operated continuously for 24 hours a day. Thanks to the front access design, parts can be replaced and repaired from the front of the display in the event of a problem. It is equipped with a burn-in prevention and correction function, so it can stably display images even in environments where speciﬁc images are displayed for long periods of time.

Efferently installation and expandability

The thin, lightweight design reduces the weight load on the wall and the workload during installation. By assembling and adjusting the modules at the factory in advance and shipping them as semi-assembled products, high-quality images with minimal color deviations between modules are ensured. It is also equipped with two slots for Intel^® SDM speciﬁcations, and by mounting a function board, the system can be expanded.

All-in-one convenience

The AD Series is an all-in-one type that comes with all necessary equipment, including a display panel, power box, control box, and mounting brackets. Since multiple displays can be seamlessly combined without visible joints, text and images are displayed clearly without any obstruction at the seams.

Kit components

Cabinet module
Wall mount
Power box
Control box
Complete set of cables
Remote controller
Spare module and accessories

^{* Ex 110-inch model}

High Visibility

The high brightness level of 700 cd/m² ensures excellent visibility even in brightly lit rooms.
There’s no need to dim the lights during meetings, so documents and visuals remain crisp and easy to read, enabling smooth and comfortable meetings and presentations.

Easy to operate using a remote controller

Just like professional-use displays, the included remote controller allows for easy setup and operation. This allows you to perform operations such as turning the power on/off and input switching from a remote location, enabling intuitive operation.

Faithfully reproduces the appeal of content with a wide color gamut

LED displays are composed of RGB three-primary-color LED elements and are characterized by a wide color gamut. They realistically reproduce the texture and depth of subjects, making them ideal for use across a variety of industries.

Furthermore, they are equipped with color management settings that allow color gamut conversion, ensuring faithful reproduction of content created for the color gamuts of LCD displays or smartphones. This enables video output that maximizes the appeal of content according to its intended use.

Energy-saving operation optimized for installation environment

Panasonic's proprietary APL (Average Picture Level) power control is adopted. This feature adjusts brightness according to the displayed content, achieving both clear visibility and energy-efficient operation.

In addition, the built-in illumination sensor automatically adjusts the brightness of the LED display to match the brightness of the room, thereby reducing power consumption.

^{* Image for illustrative purposes only.}

Reliable 24-hour continuous operation

The AD Series supports 24-hour continuous operation, making it ideal for environments that require extended usage such as information boards and monitoring rooms.

Burn-in prevention and brightness correction functions

In addition to a burn-in prevention function that shifts screen pixels at fixed intervals, the system also calculates and corrects the degree of brightness degradation in affected areas, ensuring uniform and easy-to-view image display.

Humidity sensor function (warm-up operation)

When the LED display is started at 100% brightness in an environment with high humidity, malfunctions such as lighting failure are more likely to occur.
The AD Series gradually increases brightness upon startup, using self-heating to reduce humidity inside the LED panel, and this control mechanism helps minimize stress on the LED elements.

Quick response in case of panel trouble

LED modules can be removed from the front of the display.

In the event of panel trouble, modules can be replaced or repaired via front access, minimizing downtime.
Since repairs and maintenance can be performed from the front, installation is possible even in locations without sufficient rear space.

Lightweight, slim design for easier installation

A thinner and lighter design has been achieved while maintaining cabinet strength.
The AD Series is shipped as a semi-assembled product that has already been pre-assembled and adjusted at the factory. This reduces gaps and color misalignment between modules and shortens installation time.

^{A. (1) Hang the cabinet module (1x4) onto the wall mount.}
^{B. Connect (2) to (1), then connect the left and right cabinet modules.}

Expanding horizons with large screens

The all-in-one LED display can also be used in combination with multiple units (NxN).
For use in multi-display configurations, please contact each region's sales company.

Easy function expansion to suit your needs

The system can be expanded by installing function boards to add interfaces or other features as required.

Specifications of TL-110AD12AW

Specifications table

DISPLAY PANEL -> Screen Size（Diagonal）	110-inch (2790.3 mm/109.86")
DISPLAY PANEL -> Brightness (typ.)	700 cd/m²
DISPLAY PANEL -> Aspect ratio	16:9
DISPLAY PANEL -> Effective Display Area (W x H)	2432 x 1368 mm (95.74” x 53.85”)
DISPLAY PANEL -> Resolution	1920 x 1080
DISPLAY PANEL -> Contrast Ratio (typ.)	4000:1
DISPLAY PANEL -> Viewing Angle(H / V)	170°/160°
DISPLAY PANEL -> LED type / Pixel pitch	3-in-1 SDM / 1.27 mm

View specifications Download specifications

Accessories & Software

Compatible with Matrox ConvertIP range

Interface board/conversion cable

TY-IPMX-MVX-SDM

Matrox ConvertIP SDM is an Intel® smart display module that supports ST 2110 and IPMX inputs. Featuring two RJ45 and two SFP28 ports on a single device, ConvertIP SDM is designed for compressed or uncompressed workflows up to 25G and is optimal for zero latency applications. The device’s all-in-one design fits into displays and projectors, making it ideal for users that require the convenience and reliability of an integrated display solution.

View product

Key Features
Multi-network support 2x SFP28 (10G & 25G network support for media and control) 2 x RJ45 (1/2.5G network support for media and control transport) 1 x RJ45 (1G network support for independent control network)
Daisy Chain feature enables the reception and output of multiple streams from a single network port
Ensure uninterrupted operation in case of network problems with support of ST 2022-7 redundancy
Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
ConvertIP Command Center web interface for managing ConvertIP devices
Complimentary ConvertIP Manager Windows application for simple commission and deployment Quiet operation
HDCP 1.4 and 2.2 support

Interface board/conversion cable

TY-SB01DL

This DIGITAL LINK Terminal Board is compatible to be used with models; PT-REQ15, PT-REZ15, PT-REQ12, PT-REQ10, PT-REQ80.

View product

Interface board/conversion cable

TY-SB01QS

This terminal board is supported only when the main software version of the display is 2.30 or later and the sub software version of the display is 02.20 or later. Please contact your sales representative with regard to details.

View product

Showing 3 of 3

APantac SDM - compatible with Panasonic

SDM board

TY-SDVoE-SDM

SDVoE Receiver for SDM

View product

Key Features
SDVoE receiver for SDM-S
Supports HDMI 2.0/HDCP 2.2/1.4
Supports UHD RGB/4:4:4 8 bit, 4:2:0 10 bit and 12 bit HDR
Supports all resolutions up to 594 MHz
Supports HDR pass through

Apantac SDM - compatible with Panasonic

SDM board

TY-SDI-HDTV-SDM

12G SDI Receiver for SDM

View product

Key Features
UHD SDI receiver for SDM-S
Supports 12G/6G/3G/HD-SDI input
SDI loop out
Output follows Input on Rec 709/2020
9.5W maximum power consumption

Apantac SDM - compatible with Panasonic

SDM board

TY-HDBT-SDM

UHD HDBaseT Receiver for SDM-S and SDM-L

View product

Key Features
UHD HDBaseT receiver for SDM-S
Supports HDMI 2.0/HDCP 2.2
Extends HDMI signal (1080P@12 bit) up to 330 feet (100 meters)
Extends HDMI (UHD@4:4:4) signals up to 230 feet (70 meters)

SDM board

TY-SBPURE

Fully Integrated Wireless Presentation System. No cables, dongles or set-top boxes needed.

View product

Key Features
Simple integration
Flexible BOYD
4K UHD resolution
100% data encryption
Easy installation

Showing 4 of 4

Interface board/conversion cable

TY-SB01DL

This DIGITAL LINK Terminal Board is compatible to be used with models; PT-REQ15, PT-REZ15, PT-REQ12, PT-REQ10, PT-REQ80.

View product

Showing 1 of 1

Related resources

View in Downloads

Brochures

Select all

TL-110AD12A_pre_en

Download

Preliminary Brochure 2025

Download

Display Quick Reference Guide February 2025

Download

Brochure Display February 2025

Download

Sorry there was an error...
The files you selected could not be downloaded as they do not exist.

You selected items.
Continue to select additional items or download selected items together as a zip file.

You selected 1 item.
Continue to select additional items or download the selected item directly.

Download selected file

EU Data Act Notice for data generated by our products

Full specifications

Download specifications

DISPLAY PANEL -> Screen Size（Diagonal）	110-inch (2790.3 mm/109.86")
DISPLAY PANEL -> Brightness (typ.)	700 cd/m²
DISPLAY PANEL -> Aspect ratio	16:9
DISPLAY PANEL -> Effective Display Area (W x H)	2432 x 1368 mm (95.74” x 53.85”)
DISPLAY PANEL -> Resolution	1920 x 1080
DISPLAY PANEL -> Contrast Ratio (typ.)	4000:1
DISPLAY PANEL -> Viewing Angle(H / V)	170°/160°
DISPLAY PANEL -> LED type / Pixel pitch	3-in-1 SDM / 1.27 mm
CONNECTION TERMINAL(Control Box) -> AC Input	IEC C14 x 1
CONNECTION TERMINAL(Control Box) -> HDMI^™ IN	HDMI^TM TYPE A Connector × 3
CONNECTION TERMINAL(Control Box) -> HDMI^™ OUT	HDMI^TM TYPE A Connector × 1
CONNECTION TERMINAL(Control Box) -> SERIAL IN	D-sub 9-pin x 1, RS-232C Compatible
CONNECTION TERMINAL(Control Box) -> IR IN	Stereo mini jack (φ 3.5 mm) x 1
CONNECTION TERMINAL(Control Box) -> AUDIO 1 IN (L / R)	Stereo mini jack (φ 3.5 mm) x 1(Shared video input except USB and MEMORY VIEWER)
CONNECTION TERMINAL(Control Box) -> AUDIO OUT (L / R)	Stereo mini jack (φ 3.5 mm) x 1(Shared video input except USB and MEMORY VIEWER)
CONNECTION TERMINAL(Control Box) -> DIGITAL AUDIO OUT	SPDIF x 1
CONNECTION TERMINAL(Control Box) -> LAN	RJ45 x 1 for network connection, PJLink^TMsupported
CONNECTION TERMINAL(Control Box) -> USB TYPE A	USB Connector Type A x 1 (DC 5V/2A, USB 3.0 is supported)
CONNECTION TERMINAL(Control Box) -> SLOT	x 2 Intel® SDM specification SLOT1: SDM-S / SDM-L, Supply power 3.3 V / Max 1.1 A, 12 V / Max 5.5 A SLOT2: SDM-S / SDM-L, Supply power 3.3 V / Max 1.1 A, 12 V / Max 2.75 A
CONNECTION TERMINAL(Display Panel) -> AC Input	IEC C14 x 4
CONNECTION TERMINAL(Display Panel) -> VIDEO IN	RJ45 x 4
CONNECTION TERMINAL(Power Box) -> AC Input	Neutrik (NAC3MP-HC) Rating 30 A x 1
CONNECTION TERMINAL(Power Box) -> AC Output	IEC C13 x 6
CONNECTION TERMINAL(Power Box) -> Control Signal	RJ45 x 1
CONNECTION TERMINAL(Power Box) -> Sensor Input	Stereo Mini Jack (Φ2.5 mm) x 1
ELECTRICAL(All-In-One : Display Panel/Control Box/Power Box) -> Power Supply	AC 220 V - 240 V 50 Hz/60 Hz 10.0 A
ELECTRICAL(All-In-One : Display Panel/Control Box/Power Box) -> Power Consumption	1503 W (Shipping Condition) / 1980 W (Rated Condition)
ELECTRICAL(All-In-One : Display Panel/Control Box/Power Box) -> On Mode Average Power Consumption^*1	708 W (Shipping Condition)
ELECTRICAL(All-In-One : Display Panel/Control Box/Power Box) -> Power Off Condition	Approx.0.5 W
ELECTRICAL(All-In-One : Display Panel/Control Box/Power Box) -> Stand-by Condition	Approx.0.7 W
ELECTRICAL -> Energy efficiency class for Europe	G class
MECHANICAL -> Dimension(W x H x D)[Display Panel]	2442 x 1378 x 30.5 mm (96.14" x 54.25" x 1.20") (Thickest: 65.5 mm / 2.58")
MECHANICAL -> Weight[Display Panel]	Approx. 90.0 kg / 198.5 lbs.
MECHANICAL -> Dimension(W x H x D)[Control box]	441 x 62 x 696 mm (17.37" x 2.44" x 27.41")
MECHANICAL -> Weight[Control box]	Approx. 6.6 kg / 14.6 lbs.
MECHANICAL -> Dimension(W x H x D)[Power box]	300 x 300 x 62 mm (11.82" x 11.82" x 2.44")
MECHANICAL -> Weight[Power box]	Approx. 2.2 kg / 4.9 lbs.
INSTALLATION -> Orientation	Landscape
INSTALLATION -> Tilting Angle	0°
INSTALLATION -> Operating Time^*2	24h / day
ENVIRONMENTAL -> Operating Environment(Temperature)	0 °C to 40 °C (32 °F to 104 °F) for up to 1400 m (4593 ft) altitude)/ 0 °C to 35 °C (32 °F to 95 °F) for between 1400 m to 2800 m (4593 ft to 9186 ft) altitude
ENVIRONMENTAL -> Operating Environment(Humidity) (No condensation)	10% to 80%
Footnote Description	Based on IEC 62087 Ed.2 measurement method In case of running for a long time, the moving image is recommended to be displayed. Including the display panel, control box, powerbox, and wall-hanging bracket.
MECHANICAL -> Dimension(W x H x D)[All-in-one]^*3	2442 x 1378 x 98.5 mm (96.14" x 54.25" x 3.88")
MECHANICAL -> Weight[All-in-one]^*3	Approx. 109.4kg / 241.2 lbs
ELECTRICAL -> Apparent power	2064 VA