1-Chip DLP™ Projectors PT-REZ12 Series

PT-REZ80

Evolved 1-Chip DLP™ Projectors Transform Your Experience with a Smooth, Frictionless Workflow

View full specifications Share page

Key features

High-Contrast Visuals Deepen Engagement

Flexibility and Expandability for Timesaving Workflow

New Compact Body Supports Maintenance-free Projection

PROJECTOR TYPE	PT-REQ12 SERIES
MODELS	PT-REZ12	PT-REZ10	PT-REQ80
RESOLUTION	WUXGA (1920 x 1200)	WUXGA (1920 x 1200)	WUXGA (1920 x 1200)
BRIGHTNESS	12,000 lm³	10,000 lm³	8,000 lm³

Ships with ET-C1S600 lens included.

Panasonic Projector: 1-Chip DLP Projector PT-REQ12 Series Introduction

Dramatic Visuals Take Production to New Heights

Deep, Smooth, and Dimensional 4K Images

Quad Pixel Drive produces smooth 4K^*1 images with fascinating depth. The technology meets demand for absolute visual realism in immersive spaces (particularly museums and 360° projection mapping) by creating detailed images without visible pixels or pixel-gridding, even when viewed up close. Engage your guests in the creator’s world with a true-to-life visual experience that brings the whole story to life.

^{*1 With Quad Pixel Drive [ON].}

Rich Color Enhancer for Vivid, Accurate Colors

Rich Color Enhancer is an original color optimization technology with two selectable modes. Dynamic Mode balances brightness and color for clear image visibility in bright environments. Standard Mode optimizes color reproduction by expanding red-channel output, leading to more naturally vibrant red expression. This is critical for the accurate reproduction of artwork and other color-rich content.

Gradation Smoother to Reduce Color Banding

Gradation Smoother reduces banding in gradients of shaded color that can become evident in images that lack enough color bit-depth. Use the projector remote to select from three levels of image correction depending on how much banding is present, or disable the function when it’s not needed. Gradation Smoother is a lifesaver when banding is apparent in the projection, and there’s no time to re-edit the content.

Evolved Dynamic Contrast

In addition to a higher 25,000:1¹ contrast ratio, Evolved Dynamic Contrast gains new scene analysis circuitry that more accurately recognizes light and dark areas of the image. The difference between black, white, and contrasting colors stands out more dramatically than ever before. It minimizes dimming when projecting contrast-rich content and makes black deeper and whites brighter. Each video frame is analyzed in real-time, and light output is continuously adjusted to meet the precise contrast requirements of each scene.

Detail Clarity Processor 4 Improves Image Clarity and Sharpness

Detail Clarity Processor 4 analyzes video signal frequency bands for each scene, extracting distribution information of ultra-high, high, mid, and low-frequency components. Panasonic’s unique image quality correction circuitry then applies optimal processing enhancement to each area of the screen. Building on the capabilities of Detail Clarity Processor 3 available on previous Panasonic 1-Chip DLP™ projectors, Detail Clarity Processor 4 significantly improves the sense of clarity, making fine details seem crisp, sharp, and lifelike.

Adjust Black Levels on Curved Screens

Achieving uniform black levels inside blended areas on curved screens has always been difficult. This is because the screen's curvature distorts the width of the black borders that define the adjustment area. Panasonic answers the problem with flexible black-level adjustment to suit arbitrary screen shapes. You can use up to 17 control points to reshape black borders so they fit the screen symmetrically without distortion. Black levels can be set precisely within a half-pixel margin, so blends are indiscernible even when viewing the screen at close range.

Adjust Black Levels Inside and Outside the Image Display Area

Panasonic’s black-level adjustment has evolved to eliminate distracting black-level bumps that can appear in blends outside of the image display area after geometric adjustment is applied. By unlinking black-level adjustment from geometric adjustment, black-level settings can be applied to the entire blend, including the image overlaps outside the image display area, for a completely seamless multi-screen image.

^{Note: Black-level area setting must be performed before black-level adjustment. The ability to unlink black-level adjustment from geometric adjustment is supported only on flat screens when adjacent images are aligned vertically or horizontally.}

Smooth Playback of 2K/240 Hz1 Content

REQ12 Series can play 2K/240 Hz¹ video with an input-to-output latency of just 6 ms², smoothly reproducing fast-moving objects and action sequences with minimal blur. High-speed 2K/240 Hz¹ content can be displayed over multiple screens with edge-blending enabled, making REQ12 Series ideal for sharing gameplay action with audiences at eSports events or for any application where fluid motion and fast response are important. REQ12 Series also supports Panasonic’s optional ET-SWR10³ Real-Time Tracking Projection-Mapping System. This ready-to-use Software Development Kit (SDK) works with infrared cameras to enable image projection onto fast-moving objects at 2K/240 Hz¹, enabling the seamless combination of digital and analog worlds in your interactive XR attraction.

^{1 The display frame rate corresponds to the input signal frame rate.}
^{2 Value is approximate. May vary depending on the input signal, peripheral devices, and other conditions.}
^{3 Optional ET-SWR10 is used in conjunction with third-party devices (sold separately). Compatibility with third-party devices cannot be guaranteed. Other limitations apply. For more information, please visit the ET-SWR10}^webpage^.

Supports Widescreen Input Signals

Single-chip DLP™ projectors are a popular choice for bringing on-site and remote teams together in hybrid conferencing spaces. The latest video-conferencing software can output a 21:9 signal to a REQ12 Series projector so that the faces of remote participants appear along the bottom of the screen at eye level with those seated in the room. This improves communication fluency among members of the group. In addition, with more games, films, and other immersive content produced with a 21:9 aspect ratio, it makes sense to invest in a projector that can deliver a cinematic experience.

Effortless Workflow, Improved Expandability

Wide Scalability with Intel® SDM-ready Slot

Intel^® SDM-ready slot integrates optional proprietary or third-party¹ function boards. These reduce installation complexity and make it easier to adapt, scale, and expand your projector’s connectivity to suit different applications and event-site infrastructure. The projector works with Panasonic’s DIGITAL LINK Terminal Board (TY-SB01DL), 12G-SDI Terminal Board (TY-SB01QS), 12G-SDI Optical Function Board (TY-SB01FB), and Wireless Presentation System PressIT Receiver Board (TY-SB01WP), as well as selected third-party¹ PC boards, terminal boards, and AVoIP boards.

Interface Expandability with SLOT

^{Note: The projector terminal layout pictured is for illustrative purposes only.}

^{1 Proprietary and third-party Intel® SDM-ready function boards sold separately. A list of third-party function boards tested for compatibility with the PT-REQ12 Series will be announced. Panasonic cannot guarantee the operation of third-party devices. The transmission method to the slot must be by HDMI™ signal.}

Import and Save Your Custom Test Patterns

In addition to 10 built-in test patterns, you can now import and save up to three custom test patterns to the projector. You can save your preferred test patterns or use your client’s content to calibrate the projector before the video source is connected. Access compatible BMP or PNG image files saved to USB memory via the Test Pattern menu, where they can be saved, renamed, or deleted using the projector remote control.

^{Note: Supports PNG (1/8/16/24/32/48/64-bit, non-transparent, alpha blending disabled) and BMP (1/8/24-bit) formats with a maximum resolution of 3840 x 2400 dots.}

Smart Projector Control1 App Smooths Your Workflow

Smart Projector Control¹ app simplifies projector setup and operation. Connection is easy: just scan the QR Code² displayed in the projector’s OSD menu with your smartphone camera. You can control up to 64 projectors simultaneously and adjust settings without needing to project the OSD menu. You can select test patterns, adjust lens settings via the new lens-control UI, lock brightness, and perform focus adjustment using your smartphone camera³ from distances of up to 30 m (98 ft)⁴ away. For more information, visit the Smart Projector Control webpage.

^{1 Available free from the App Store or the Google Play store. Check device and OS compatibility before downloading and installing the app on your device.}
^{2 Requires optional AJ-WM50 Series Wireless Module (sold separately). Product availability may vary by country or region.}
^{3 Some devices do not support the projector autofocus function.}
^{4 When projecting a 300-inch image. The maximum distance is 3 m (10 ft) for a 100-inch image.}

Save Prep Time Before Setup with NFC Function1

NFC function¹ allows you to prepare your projector for installation and setup at the event site when AC power is unavailable or when OSD projection isn’t possible. Just place your phone on the NFC decal to connect, and use the Smart Projector Control² app to read and write settings such as Projector ID and IP address. Projectors can be prepped for immediate network connection and setup the moment power rolls out on the installation site, saving time and resources. After the event has concluded, projector settings can be reset to factory defaults while unplugged, an action that used to require OSD menu projection.

^{Save Prep Time Before Setup with NFC Function1}

Flexible Screen Adjustment via Remote Control

Free Grid lets you easily fix image distortion caused by uneven projection surfaces or objects on flat or curved screens using the projector remote control. Reshape the image by adjusting control points or V/H lines on an overlaid grid. Select from various grid resolutions between 2 x 2 and 17 x 17 lines depending on the precision you require. Work progress is saved automatically, and grid and control-point colors can be changed for best visibility over the background image.

Preactivated Upgrade Kits for Geo Pro1 Software

REQ12 Series ships with preactivated licenses for upgrade kits that come bundled with our free Geometry Manager Pro¹ software. ET-UK20 Geometry Manager Pro Software Upgrade Kit expands the software’s functionality and adds sophisticated edge-blending, color uniformity, and masking tools. ET-CUK10 Auto Screen Adjustment Upgrade Kit uses data from a connected camera² to automatically calibrate edge-blended areas by adjusting their brightness, color, and black level, saving you the time and hassle of manual calibration.

^{1 Visit}^PASS^{to register your projector and download free Geometry Manager Pro software for Windows® (upgrade kits included). Visit the Panasonic Geometry Manager Functions}^webpage^{for more information.}

^{2 Compatible cameras comprise Nikon D5200/D5300/D5500/D5600/D7500. Use of the Auto Screen Adjustment function with these cameras requires installation of the Auto Screen Adjustment Plug-in (a free camera driver available from}^PASS^{). Use of the Auto Screen Adjustment function with D7500 requires Geometry Manager Pro Ver. 6.1.10 or later and Auto Screen Adjustment Plug-in Ver. 5.1.10 or later.}

Quickly Find the Correct Projection Angle

Laser projectors can be installed at any angle through 360° to map images over floors, walls, and 3D objects. However, adjusting the projection angle to match the one specified in the design simulation can be tricky, especially if the projector is difficult to reach. REQ12 Series features a gyro sensor that detects changes to the projector’s body pitch and roll angles and displays the information graphically in the OSD settings menu. Installers no longer need assistance to check the projection angle as the body is adjusted. They can view the on-screen graphic and adjust the projector angle as necessary before securing the unit.

^{Note: The displayed values are based on the results of angle sensor detection and may differ from the actual angle representing the posture of this projector. The displayed values are for reference only, and accuracy is not guaranteed.}

New Cabinet Design for Reliable Operation

Dust-Resistant Optical Engine and Liquid Cooling System

REQ12 Series features an optical engine and laser light source that conform to the IP5X Dust Protected (IEC 60529)¹ standard, eliminating the need for an air filter and enabling 20,000 hours² of maintenance-free projection. Reliability is proven by accelerated dust-chamber testing in significantly dustier conditions than those in which some competitive products are tested. A refined liquid-cooling system enables continuous operation in dusty environments with significantly lower noise levels than the previous series, ideal for quiet spaces such as museums. In addition, the stylish new cabinet design blends unobtrusively into the space to minimize distractions.

^{1 The Dust Protected performance of this unit is not guaranteed to be free from damage or failure under all conditions (environment with conductive dust, etc.). Please use an enclosure in environments with smoke containing oil, salt, and moisture.}

^{2 Around this time, the light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, NORMAL Mode, Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Panasonic recommends a checkup at the point of purchase after about 20,000 hours. Light-source lifetime may be reduced depending on the environmental conditions. Replacement of parts other than the light source may be required in a shorter period. Estimated maintenance time varies depending on the environment.}

Remote Preview LITE for Monitoring During Events

Remote Preview LITE lets the projectionist confirm connectivity and assess image adjustment changes prior to video projection by viewing thumbnails of the input signal on a laptop. This is useful at events such as live concerts where opportunities to check content on screen are limited due to soundchecks, sunlight on the screen, and other logistical factors. Accessed via software or web browser, Remote Preview LITE works with the projector in Standby¹ or with the shutter on and reduces the chance of errors before the performance.

^{Note: Requires Multi-Monitoring & Control Software Version 3.3 or later available free}^here^{. For more information, click}^here^.

^{1 Projector must be set to Pre-Show Mode.}

Backup Input Redundancy

Two identical signals can be simultaneously transmitted to HDMI 1 (Primary) and HDMI 2 (Backup). If transmission to the primary input is interrupted, the projector switches to the backup automatically in a minimum of 0.3 seconds¹ without screen-blanking. This layer of insurance gives greater peace of mind during events where image display can’t be interrupted.

^{Note: Primary Input (HDMI 1) and Backup Input (HDMI 2) terminal assignment is fixed. Input signals to primary and backup inputs must be identical.}

^{1 Varies depending on the Backup Input mode and the connected external device.}

Highly Reliable Multi-Laser Drive Engine

Multiple laser modules are equipped with our unique Failover Circuitry technology. In the unlikely event a single diode fails, Failover Circuitry continues to supply electricity to the functional diodes in the series, minimizing brightness loss. If the same issue were to occur in projectors without Failover Circuitry, all diodes in the module might shut down, resulting in a significant loss of brightness.

Specifications table

Projector type	1-Chip DLP™ projectors
DLP™ Chip \| Panel Size	0.8 in diagonal (16:10 aspect ratio)
DLP™ chip \| Number of Pixels	2,304,000 (1920 x 1200 pixels)
Light Source	Laser diode
Light Output1 2	8,000 lm / 8,200 lm (Center)*3
Time until light output declines to 50 %*4	20,000 hours (NORMAL/QUIET), 24,000 hours (ECO)
Resolution	WUXGA (1920 x 1200 pixels)
Contrast Ratio*1	25,000:1 (Full On/Full Off, Dynamic Contrast [3])
Screen Size (Diagonal)	70–700 inches (with supplied lens)
Center-to-corner zone ratio*1	90 %
Lens	PT-REZ12/REZ10/REZ80: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus; PT-REZ12L/REZ10L/REZ80L: Optional powered zoom/focus lenses

View full specifications

Accessories & Software

Frames

ET-RFD40

The rental frames are sturdy, strong and visually appealing. In addition, they offer a horizontal and vertical adjustment feature for the ideal projector position.

View product

Key Features
Convertible Design
Improved adjustment possibilities
Full stacking compability to earlier frame models
Built-in galvanic inslation
DGUV V17 verified

Showing 1 of 1

Lenses for 1-Chip DLP

ET-C1T700

1-Chip DLP™ Projector Zoom Len - Throw Ratio 16:10 (2.07 - 3.38:1)

View product

Key Features
Bring out the best image reproduction
Support efficient workflow
Maintaining stable image quality

Lenses for 1-Chip DLP

ET-C1W500

1-Chip DLP™ Projector Zoom Len - Throw Ratio 16:10 (0.940 - 1.39:1)

View product

Key Features
Bring out the best image reproduction
Support efficient workflow
Maintaining stable image quality

Lenses for 1-Chip DLP

ET-C1W400

1-Chip DLP™ Projector Zoom Len - Throw Ratio 16:10 (0.680 - 0.950:1)

View product

Key Features
Bring out the best image reproduction
Support efficient workflow
Maintaining stable image quality

Lenses for 1-Chip DLP

ET-C1W300

1-Chip DLP™ Projector Zoom Len - Throw Ratio 16:10 (0.550 - 0.690:1)

View product

Key Features
Bring out the best image reproduction
Support efficient workflow
Maintaining stable image quality

Lenses for 1-Chip DLP

ET-C1U100

1-Chip DLP™ Projector Zoom Len - Throw Ratio 16:10 (0.308 - 0.330:1)

View product

Key Features
Bring out the best image reproduction
Support efficient workflow
Maintaining stable image quality

Lenses for 1-Chip DLP

ET-C1S600

1-Chip DLP™ Projector Zoom Len - Throw Ratio 16:10 (1.36 - 2.10:1)

View product

Key Features
Bring out the best image reproduction
Support efficient workflow
Maintaining stable image quality

Showing 6 of 6

AVAILABLE FROM CY2024 Q4

Media Processor

ET-SBFMP10

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Media Processor

ET-FMP20

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Media Processor

ET-FMP50

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Showing 3 of 3

AVAILABLE FROM CY2024 Q4

Media Processor

ET-SBFMP10

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Media Processor

ET-FMP20

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Media Processor

ET-FMP50

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Showing 3 of 3

Connect with Panasonic Visual

Full specifications

Download specifications

Projector type	1-Chip DLP™ projectors
DLP™ Chip \| Panel Size	0.8 in diagonal (16:10 aspect ratio)
DLP™ chip \| Number of Pixels	2,304,000 (1920 x 1200 pixels)
Light Source	Laser diode
Light Output1 2	8,000 lm / 8,200 lm (Center)*3
Time until light output declines to 50 %*4	20,000 hours (NORMAL/QUIET), 24,000 hours (ECO)
Resolution	WUXGA (1920 x 1200 pixels)
Contrast Ratio*1	25,000:1 (Full On/Full Off, Dynamic Contrast [3])
Screen Size (Diagonal)	70–700 inches (with supplied lens)
Center-to-corner zone ratio*1	90 %
Lens	PT-REZ12/REZ10/REZ80: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus; PT-REZ12L/REZ10L/REZ80L: Optional powered zoom/focus lenses
Lens shift \| Vertical(From the origin point of the lens mounter)	±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100)
Lens shift \| Horizontal(From the origin point of the lens mounter)	±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100)
Keystone Correction Range	Vertical: ±40 ° (±5 ° with ET-C1U100; ±10 ° with ET-C1W300; ±16 ° with ET-C1W400; ±22 ° with ET-C1W500),Horizontal: ±40 ° (±3 ° with ET-C1U100; ±5 ° with ET-C1W300; ±10 ° with ET-C1W400; ±15 ° with ET-C1W500)
Terminals \| HDMI™ 1/2 IN	HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input*5)
Terminals \| DisplayPort™	DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input*5)
Terminals \| Multi Sync In	BNC x 1
Terminals \| Multi Sync Out	BNC x 1
Terminals \| Serial In	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| Serial Out	D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals \| REMOTE 1 IN	M3 stereo mini-jack x 1 for wired remote control
Terminals \| REMOTE 1 OUT	M3 stereo mini-jack x 1 for link control (for wired remote control)
Terminals \| Remote 2 In	D-sub 9-pin (female) x 1 for external control (parallel)
Terminals \| LAN	RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals \| USB	USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory
Terminals \| DC Out	USB Type A x 1 (for power supply, DC 5 V, 2 A)
Terminals \| Expansion Slot	Open slot for for function boards, Intel® SDM compatible
Protocol versions	IPv4, IPv6*6
Power Supply	AC 100–240 V, 50/60 Hz
Power Consumption*7 \| Maximum power consumption	730 W (7.7–3.2 A) (740 VA) (Power consumption is 700 W at AC 200–240 V)
Power Consumption*7 \| On-mode power consumption (Operating mode) Nomal	570 W (AC 100–120 V), 540 W (AC 200–240 V)
Power Consumption*7 \| On-mode power consumption (Operating mode) ECO	440 W (AC 100–120 V), 425 W (AC 200–240 V)
Power Consumption*7 \| On-mode power consumption (Operating mode) QUIET	435 W (AC 100–120 V), 420 W (AC 200–240 V)
Operation noise*1	35 dB (NORMAL/ECO), 32 dB (QUIET)
Dimensions (W x H x D)	PT-REZ12/REZ10/REZ80: 498 x 212 x 648 mm (19 19/32˝ x 8 11/32˝ x 25 1/2˝) (With feet at shortest position) PT-REZ12L/REZ10L/REZ80L: 498 x 212 x 538 mm (19 19/32˝ x 8 11/32˝ x 21 3/16˝) (With feet at shortest position)
Weight*7	PT-REZ12/REZ10/REZ80: Approx. 28.7 kg (63.27 lbs) (with supplied lens), T-REZ12L/REZ10L/REZ80L: Approx. 27.0 kg (59.52 lbs) (without lens)
Operating Environment	Operating temperature: 0–45 °C (32–113 °F)*9, operating humidity: 10–80 % (no condensation)
Applicable Software	Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™
Control function via LAN	Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2)
Note	1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped. 2 When [OPERATING MODE] is set to [NORMAL]. 3 Average light-output value of all shipped products measuredat the center of the screen in NORMAL Mode. 4 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Theestimated time until light output declines to 50 % varies depending on the environment. 5 4K signals are converted to WUXGA (1920 x 1200 pixels). 6 Optional AJ-WM50 Series Wireless Module is not compatible with IPv6. 7 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft). 8 Average value. May differ depending on the actual unit. *9 When the optional AJ-WM50 Series wireless module is attached, the operating temperature range becomes 0–40 °C (32–104 °F). The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft).

1-Chip DLP™ Projectors PT-REZ12 Series

PT-REZ80

Key features

Panasonic Projector: 1-Chip DLP Projector PT-REQ12 Series Introduction

Dramatic Visuals Take Production to New Heights

Deep, Smooth, and Dimensional 4K Images

Rich Color Enhancer for Vivid, Accurate Colors

Gradation Smoother to Reduce Color Banding

Evolved Dynamic Contrast

Detail Clarity Processor 4 Improves Image Clarity and Sharpness

Adjust Black Levels on Curved Screens

Adjust Black Levels Inside and Outside the Image Display Area

Smooth Playback of 2K/240 Hz1 Content

Supports Widescreen Input Signals

Effortless Workflow, Improved Expandability

Wide Scalability with Intel® SDM-ready Slot

Import and Save Your Custom Test Patterns

Smart Projector Control1 App Smooths Your Workflow

Save Prep Time Before Setup with NFC Function1

Flexible Screen Adjustment via Remote Control

Preactivated Upgrade Kits for Geo Pro1 Software

Quickly Find the Correct Projection Angle

New Cabinet Design for Reliable Operation

Dust-Resistant Optical Engine and Liquid Cooling System

Remote Preview LITE for Monitoring During Events

Backup Input Redundancy

Highly Reliable Multi-Laser Drive Engine

Specifications table

Accessories & Software

ET-RFD40

ET-C1T700

ET-C1W500

ET-C1W400

ET-C1W300

ET-C1U100

ET-C1S600

ET-SBFMP10

ET-FMP20

ET-FMP50

ET-SBFMP10

ET-FMP20

ET-FMP50

Related resources

Connect with Panasonic Visual