Products

Ondanks de hoge helderheid en verbluffende beeldkwaliteit is de PT-RQ35K2-serie het kleinste en lichtste 3-chip DLP-product™ in zijn klasse en kan het met slechts twee personen worden vervoerd en geïnstalleerd. Bespaar op arbeidskosten en geniet van meer gemak wanneer de ruimte in de achtertuin beperkt is. Een combinatie van twee blauwe en één rode laser vergroot de reproductie van de kleurruimte met 114 %*3 ten opzichte van de PT-RQ32K2. Levendige rode en puur blauwe reproductie verhoogt het realisme voor een meeslepende ervaring en tilt inhoud met een hoge resolutie naar een hoger niveau. Het opnieuw ontworpen luchtstroompad, het koelsysteem en de finless radiator versterken de betrouwbaarheid. Dynamic Digital Control regelt de uitvoer en koeling van rode lasers voor een consistente beeldkwaliteit. Verwacht 20.000 uur onderhoudsvrije projectie met back-upinvoer en laserfailovercircuits die gemoedsrust bieden wanneer de projectie niet kan worden onderbroken.

Ondanks de hoge helderheid en verbluffende beeldkwaliteit is de PT-RQ35K2-serie het kleinste en lichtste 3-chip DLP-product™ in zijn klasse en kan het met slechts twee personen worden vervoerd en geïnstalleerd.

De RQ45K-serie levert 42.000 lm met een behuizingsgrootte die gelijk is aan die van de RQ35K2/RQ35K-serie en stroomlijnt de logistiek voor transport, installatie en installatie. Compatibiliteit met bestaande monturen, flightcases en optionele lenzen maakt upgraden economisch.

The RL132 combines functionality and speed with an insertion rate up to 25,700cph (.14s/component), a board processing sizes up to 650 x 381mm, a 33% reduction in PCB transfer time, up to 18% reduction in electrical and air consumption per insertion and an improved parts lifespan for a very low cost of ownership. This through-hole machine features a 4-pitch span and is configurable with 40 or 80 components inputs. Meanwhile, its dual split carriage enables machine function at exchange mode and parts replenishment during production. The RL132 was designed for a non-stop productivity. The Lead V cut method enables the RL132 to insert radial lead components at a speed of 0.14s/component. Either a 2-pitch (2.5mm/5.0mm), 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) option can be selected. The fixed feeder unit method and an out-of-component detection function allow ongoing component replenishment and long-term runs. PCB of 650mm x 381mm can be processed.

The NPM-DX provides a greater line throughput, better quality and lower production cost featuring an autonomous line control, which guaranties a stable operation based on automatic functionality. This functionality in combination with the machine set up offers a labor-saving production with improved utilization. In combination with the Panasonic software environment and embedded into an Industry 4.0 philosophy, the user can expect a modern shop floor management system including various remote operation options, feeder setup navigation, component supply navigation etc. In total, the NPM-DX reduces downtimes and increase the line throughput. With 92 400 cph and a feeder capacity for up to 136 reels, the NPM-DX is the ideal solution to meet the expectation of an evolving electronics assembly industry. The NPM-DX can process PCB sizes of up to 510 x 590 mm and place large connectors (up to 150 x 25mm) and other components (up to 120 x 90mm). This and other features make the NPM-DX the best solution for high volume-mix manufacturing.

The AM100 meets the high standards of reliability, capacity and flexibility that customers look forward to in a cost-efficient, gradationally scalable, high-mix SMT solution. It only takes one machine to start off production and extra units and/or technologies can be easily integrated according to requirements. The single-head (single beam) of Panasonic's AM100 modular placement machine is able to place an impressive component array including: 0402 mm to 120 x 90 x 2 8mm, odd-shaped components, large connectors, as well as advanced packaging types e.g.Features The single solution AM100 provides high net productivity and versatility. Equipped with a 14-nozzle head and 160 feeders the AM100 can place an impressive component range. On top the non-stop changeover allows you to prepare the next product process during running production. An off-line setup support station and a feeder set-up navigator option improves operating time and minimizes the downtime.

Panasonic’s manufacturing operations optimizer automatically draws up production plans to reduce man-hours and enhancing production efficiency.

The NPM-WX  represents the  next  generation  of  Panasonic’s  mounting  production  concept “Smart manufacturing”. The platform represents higher  line  throughput  and  improved  quality  at  lower cost  thanks  to  integrated  automated  systems.  APC  system  and  automatic  recovery  are  integrated  to provide autonomous line control.  The  incorporated  floor-management system and  remote-operation option  improve  utilisation  combined  with  lower  labour  costs.  Feeder  set-up  and  component supply  navigation  systems  are available, helping  to  reduce  the  work  variations.The  NPM-WX  can  handle  a  wide variety  of  components, from  0402  chip  components  up  to  large  components with  a max. size  of 150x25x40 mm.  Parts can be supplied from  tape,  stick or tray-feeder . Feeder-cart  flexibility can be provided by selecting the existing 30-input feeder cart or inserting two 17-inpu

The fully automated printing solution is part of the "Autonomous Factory" Concept - a factory that immediately responds to every situation and continues to evolve autonomously. Ensuring the production of non-defective items through the integrated control of autonomous uninterrupted mounting lines and floors independent of any human intervention and judgment.

Building upon the PSX307 Plasma Cleaner, the PSX307A Plasma Cleaner features an enlarged plasma chamber capacity that improves productivity. In addition, the PSX307A system is able to handle full wafers (both bare and on dicing frames).  Besides the increased capacity, Panasonic's original Plasma Monitoring System suppresses abnormal discharges resulting in a secure and efficient production process.  Additionally, the option to include a traceability functionality  ensures high level process Quality.

The MD-P300 Flip-chip Bonder is process-flexible, combining flip-chip and thermosonic bonding in a single, small-footprint solution.The MD-P300 contributes to the cost-effective production (high yield, high throughput) of value-added devices. The MD-P300 can achieve high speed and high accuracy bonding through its low gravity point and lightweight bonding head. The MD-P300 supports 300 mm (12") wafers, and is an ideal solution for COB hybrid assembly in combination with an in-line Panasonic SMT placement machine.The MD-P300 is capable of fast cycle times and a placement accuracy of +/-5 μm at 0.5 seconds per IC (dry run) - with thermosonic processes at 0.65 seconds, including process times.

Automation / Labor-saving Solution + Intelligent system solution to achieve manufacturing that is further in line with production plan