Products

FeaturesThe Manufacturing Operations Optimiser (MFO) is a newly developed product for drawing up production plans required  for on-site  operations  to  reduce the man-hours needed for the production  plan  and,  at  the same time, to enhance production efficiency. MFO creates detailed schedules for productions and pre-set-up operations and calculates the required resources for production by simulating the manufacturing process  of  the  entire  SMT production floor.  By simulating the planned  production, the  MFO  answers questions about estimated  production  completion, indicates which  production  sequence is to  be  used for higher efficiency, proposes optimal machine set-up for higher efficiency, and indicates the number of staff needed to  achieve  the  plan.  MFO  models  the  required  production  line, taking  into  account errors that can occur at the production machines, such as parts exchange. It optimises production taking into  account multiple  production  lines.  The  off-line  set-up  sequence  can  be  optimised  to  adjust  the requirement  of  staff  and  material. MFO  support  is  not  limited  to  machines  of the NPM-series  but also  supports  CMand  DT-series  machines  and  screen  printers. It also supports non-Panasonic equipment such as SPI, AOI, reflow ovens, screen printers and others.

Panasonic manufacturing operations optimizer (MFO) is the line management system to create detailed production schedules including pre-set-up operations. Those production plans are mandatory to optimize manufacturing processes and thus improves cycle times and production efficiency. It also calculates the number of operators required by simulating the entire SMT manufacturing operation.  Image of the systemMFO provides clear and easy to understand plans for production, process set-up and operator management plus simulation reports.

Beside this, it provides various optimization function, like mounting process, production plan, production-set-up plan and operator count, including a table of function list and machines.  

The APX300 (option S) Dry Etcher is the perfect dry etching equipment for silicon and compound semiconductors. It incorporates a multi-wafer direct cooling system for optimal control of wafer temperature, as well as MSC-ICP (Multi-Spiral Coil type ICP) and BM-ICP (Beamed-type ICP) plasma sources to generate high density plasma. In this way, it achieves a uniform etching profile in a very short timeframe. Building upon the single wafer process chamber of the previous model (Panasonic E620), combined with enhanced process options and two different handling systems, the APX300 (option S) is extremely fast and covers a wide range of process demands.

Features and benefits of Panasonic's APX300 (option S) Dry Etcher  The Panasonic APX300 (option S) Dry Etcher can process wafers such as power devices, SAW filters, communication devices, MEMS sensors and many more. The APX300 (option S) is the successor to the previous best-selling Panasonic E620 and utilizes the same single wafer process chamber.  Two plasma sources are available: MSC-ICP (Multi-Spiral Coil type ICP) and BM-ICP (Beamed-type ICP). MSC-ICP is Panasonic's latest technology, developed to realize highly accurate processing. BM-ICP offers higher electron density and achieves faster processing, covering a wide range of process demands.  In addition, two types of handling systems are available: Atmospheric Loading Supply and Vacuum Load Lock Supply.  The Panasonic APX300 (option S) Dry Etcher is CE certified.

The Stencil Printer SPV-DC enables high efficiency dual lane production in a compact design. The printer is designed for high speed production without changeovers. To reduce running costs the SPV-DC is equipped with the award-winning paperless cleaning function. Solder paste can refill automatically. Solder mask and the final printing result can be verified with an internal inspection. With the machine-to-machine-communication option the SPV-DC is using correction data to correct positional printing errors. The high-speed printer SPV-DC can print on board sizes from 50 x 50mm to 350 x 300mm. With the dual lanes the printer provides a cycle time of 13s, including transfer, positioning, recognition, high-precision printing and respective cleaning. Due to the non-stop changeover, the SPV-DC allows you to prepare the next production while running the printing process.

Mounting feed-forward function Components can be placed correctly based on the solder printing position. Placement skip data feed-forward/Block recognition data feed-forward Placement machine recognition time reduction based on feed-forward discrepancy data. Misplacement of components using a modular placement machine can be prevented based on feed-forward solder/land* printing defect block data.*When inspecting lands on which package components are placed using flux epoxy. Printing position data feedback The solder printing position misalignment is measured by the inspection machine. The positioning correction is transferred by means of feedback to the screen printer. The solder printing area is measured by the inspection equipment. The stencil cleaning direction can be compared with the reference value by means of feedback.

Automation / Labor-saving Solution + Intelligent system solution to achieve manufacturing that is further in line with production plan

Unit Level Manufacturing by the synchro-motion of dispensing and bondingThe MD-P200's die bonding is carried out immediately after epoxy dispensing, thereby making it possible to finish the bonding operation before the epoxy has deteriorated. This realizes stable and high quality bonding at all bond positions on a substrate. In addition, the bonding stage camera enables pre-bonding inspection immediately after epoxy dispensing and post-bonding control immediately after the bonding of a die. This process enables manufacturing with real-time quality inspection.User-friendly operationA large touch panel and interactive software realize an easy and reliable operating environment for all users from beginners to experts.

The PSX307 Plasma Cleaner provides 1.5 times the productivity of conventional plasma cleaners. Panasonic's parallel plate plasma chamber technology delivers superior etch uniformity compared to conventional batch-type plasma cleaner systems.By using an argon plasma treatment, ultra-thin gold-plated electrodes can be wire-bonded reliably without the formation of nickel compounds. The savings achieved in cheaper gold plating can provide the ROI justification alone. The PSX307 Plasma Cleaner's other capabilities include surface modification by oxygen plasma, improving mold resin adhesion and under-fill wettability, and reducing the incidence of peel-off, voids, and cracks.Panasonic's Plasma Monitoring System suppresses abnormal discharges for a secure and efficient production process. The option to include traceability functionality ensures high level process quality as well.

Building upon the PSX307 Plasma Cleaner, the PSX307A Plasma Cleaner features an enlarged plasma chamber capacity that improves productivity. In addition, the PSX307A system is able to handle full wafers (both bare and on dicing frames).  Besides the increased capacity, Panasonic's original Plasma Monitoring System suppresses abnormal discharges resulting in a secure and efficient production process.  Additionally, the option to include a traceability functionality  ensures high level process Quality.

The AM100 meets the high standards of reliability, capacity and flexibility that customers look forward to in a cost-efficient, gradationally scalable, high-mix SMT solution. It only takes one machine to start off production and extra units and/or technologies can be easily integrated according to requirements. The single-head (single beam) of Panasonic's AM100 modular placement machine is able to place an impressive component array including: 0402 mm to 120 x 90 x 2 8mm, odd-shaped components, large connectors, as well as advanced packaging types e.g.Features The single solution AM100 provides high net productivity and versatility. Equipped with a 14-nozzle head and 160 feeders the AM100 can place an impressive component range. On top the non-stop changeover allows you to prepare the next product process during running production. An off-line setup support station and a feeder set-up navigator option improves operating time and minimizes the downtime.

The NPM-GW SMT mounter combines flexibility, versatility, and precision.

Reduce offline data creation time and realization of machine downtime zero

14" ODOLNÝ NOTEBOOK SE SYSTÉMEM WINDOWS 11 PRO A DOTYKOVOU OBRAZOVKOU S ROZLIŠENÍM FULL HD