Kompakter Solid Shine-Laserprojektor mit 12.000 Lumen
PT-RZ12
DiscontinuedKonzipiert für dauerhaft stabile Helligkeit in Events und Staging. 3 Chip DLP-Projektor mit Laserlichtquelle, 12.000 Lumen und WUXGA.
Hauptmerkmale
| 3 Chip DLP Laser, 12.000 Lumen, WUXGA |
| Hohe Frame-Rate von 120 Hz für exzellente und scharfe Filmwiedergabe |
| Lampenfreie Laserprojektion mit staubfestem Flüssigkeitskühlsystem für 20.000 Stunden wartungsfreien Betrieb |
| Kontrastverhältnis von 20.000:1 |
- 120-Hz-Hochgeschwindigkeits-Real-Motion-Prozessor und Frame-Creation für fließende Bewegungsreproduktion
- Mit 12.000 lm unglaublich hell
- Der weltweit leichteste 3-Chip-DLP™-Projektor mit einem Gewicht von nur 45 kg (Stand: Juni 2015)
- Dynamisches Kontrastverhältnis von 20.000:1*1 durch Steuerung der Laserlichtquelle
- Detail Clarity Processor der neuesten Generation verleiht auch feinsten Details natürliche Schärfe
- System Daylight View 3 für verbesserte Farbwahrnehmung in hellen Räumen und Mapping-Anwendungen
- DICOM-Simulationsmodus für medizinische Präsentationen und Schulungen*2
- REC 709-Modus gewährleistet originalgetreue Farbwiedergabe bei HDTV-Projektionen
Niedrige Betriebskosten, höchste Zuverlässigkeit
- Äußerst lange Lampenlebensdauer von 20.000 Stunden*3
- Geräuscharmer Betrieb dank neuem Flüssigkeitskühlsystem
- Stabiler Betrieb bei Umgebungstemperaturen bis zu 45 °C*4
- Gleichbleibende Farbwiedergabe ohne Qualitätsverlust selbst über längere Zeit
- Laserlichtquelle ermöglicht Dauerbetrieb
- Staubfester Optikblock
- Motorbetriebener weiter Lens-Shift-Verstellbereich
Flexible 360-Grad-Installation
- Vertikale, horizontale und 360°-Schwenkprojektion dank Laserlichtquelle
- Multi-Screen Support System zur nahtlosen Zusammensetzung mehrerer Projektionsflächen: Edge-Blending, Farbabgleich und digitale Bildvergrößerung
- Geometrieanpassung für Projektion auf gewölbte oder kugelförmige Oberflächen
- Kompatibel mit Auto Screen Adjustment-Kit ET-CUK10*5
- Multi-Unit Brightness Control
- Kompatibel mit Panasonic Multi Monitoring & Control Software und Frühwarnsoftware
- Einkabelige DIGITAL LINK-Verbindung überträgt Video- und Steuerungssignale über bis zu 100 m.
- Kompatibel mit Art-Net DMX, einem Protokoll zur Beleuchtungsverwaltung
- Zahlreiche Anschlüsse wie 3G-SDI, DIGITAL LINK, DVI-D und HDMI
- Gleiche Objektiv-Ausstattung (inkl. des Ultra-Kurzdistanzobjektivs ET-D75LE90) wie die 3-Chip-DLP™-Projektoren-Reihe von Panasonic
*1 Full an/aus, mit dynamischem Kontrast auf „3“, *2 Dieses Gerät ist kein medizinisches Instrument. Niemals für medizinische Diagnosen verwenden, *3 Einsatzumgebung kann Lebensdauer der Lichtquelle beeinflussen, *4 Je nach Umweltbedingungen kann Lichtleistung zum Schutz des Projektors reduziert werden, *5 Mit Ausnahme der USA ist ET-CUK10 weltweit erhältlich. Verfügbarkeit variiert je nach Land.
Produktgalerie
Tabelle der Spezifikationen
| Lamp | 3-Chip DLP Laser |
|---|---|
| Helligkeit | 12,000 lumens |
| Auflösung | 1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.) |
| Power Supply | AC 100-240 V 50/60 Hz |
| Power Consumption | 1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3 |
| BTU Value | Max 4,096 BTU |
| DLP™ Chip | Panel Size | 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio) |
| DLP™ Chip | Display Method | DLP™ chip x 3 (R, G, B), DLP™ projection system |
Produktserien
PT-RQ13 Series
PT-RQ13 Series | |||
|---|---|---|---|
| Model |  | | |
| Lens test | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses |
| Projector Type | 3-Chip DLP Laser | 3-Chip DLP Laser | 3-Chip DLP Laser |
| DLP™ Chip | Panel Size | 22.9 mm (0.9 inches) diagonal (16:10 aspect ratio) | 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio) | 24.1 mm (0.95 inches) diagonal (4:3 aspect ratio) |
| DLP™ Chip | Display Method | DLP™ chip x 3 (R, G, B), DLP™ projection system | DLP™ chip x 3 (R, G, B), DLP™ projection system | DLP™ chip x 3 (R, G, B), DLP™ projection system |
| DLP™ chip | Number of Pixels | 4,096,000 (2,560 x 1,600) x 3, total of 12,288,000 pixels
49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON | 2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels | 1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels |
| Brightness | 10,000 lumens | 12,000 lumens | 12,000 lumens |
| Light Source | Laser Diode (Laser class: Class 1)*Class 3R for North America.
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³
43,800 hours at constant luminance (Longlife1)
61,320 hours at constant luminance (Longlife2)
87,600 hours at constant luminance (Longlife3) | Laser Diode (Laser class: Class 1)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³
43,800 hours at constant luminance (Longlife1)
61,320 hours at constant luminance (Longlife2)
87,600 hours at constant luminance (Longlife3) | Laser Diode (Laser class: Class 1)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³
43,800 hours at constant luminance (Longlife1)
61,320 hours at constant luminance (Longlife2)
87,600 hours at constant luminance (Longlife3) |
| Resolution | 5,120 x 3,200 pixels (Quad Pixel Drive: ON) | 1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.) | 1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.) |
| Contrast Ratio | 20,000:1 (full on/full off, in Dynamic Contrast 3 mode) | 20,000:1 (full on/full off, in Dynamic Contrast 3 mode) | 20,000:1 (full on/full off, in Dynamic Contrast 3 mode) |
| Screen Size | 1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio)
1.78-15.24 m (70 - 600 inches) with the ET-D75LE8 (16:10 aspect ratio)
3.05-15.24 m (120 - 600 inches) with the ET-D75LE90 (16:10 aspect ratio) | 1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio)
1.78-15.24 m (70-600 inches) with the ET-D75LE8 (16:10 aspect ratio)
3.05-15.24 m (120-600 inches) with the ET-D75LE90 (16:10 aspect ratio) | 1.78-25.4 m (70-1,000 inches) (4:3 aspect ratio)
1.78-15.24 m (70-600 inches) with the ET-D75LE8 (4:3 aspect ratio)
3.05-15.24 m (120-600 inches) with the ET-D75LE90 (4:3 aspect ratio) |
| Optical Axis Shift | Vertical | ±59% (±44% with the ET-D75LE6), (+74-84% with the ET-D75LE90),
from center of screen, powered | ±55% (±44% with the ET-D75LE6), (+73-78% with the ET-D75LE90),
from center of screen, powered | ±50% (±40% with the ET-D75LE6), (+71% with the ET-D75LE90),
from center of screen, powered |
| Optical Axis Shift | Horizontal | ±29% (±19% with the ET-D75LE6), (-12-16% with the ET-D75LE90),
from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. | ±20% (±15% with the ET-D75LE6), (±6% with the ET-D75LE90),
from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. | ±30% (±20% with the ET-D75LE6) from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50/ET-D75LE90. |
| Lens | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses |
| Installation | Ceiling/floor, front/rear | Ceiling/floor, front/rear | Ceiling/floor, front/rear |
| Terminals | SDI In 1 | BNC x 1,
3G/HD/SD-SDI input, Dual-link input (LINK-A) ,
Quad-link input
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424 compliant
Dual-link HD-SDI signal SMPTE ST 372 compliant
Dual-link 3G-SDI signal SMPTE ST 425 compliant
Quad-link HD-SDI signal
Quad-link 3G-SDI signal SMPTE ST 425 compliant | BNC x 2,
Dual-link 3G-SDI signal: SMPTE ST 425 compliant
3G-SDI
(3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI)
signal: SMPTE ST 424 compliant
Dual-link HD-SDI signal: SMPTE ST 372 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant | BNC x 2,
(3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI)
3G-SDI signal: SMPTE ST 424 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant |
| Terminals | HDMI In | HDMI 19-pin x 1, Deep Color, compatible with HDCP,
NOTE: Compatible with non-interlaced signals only. | HDMI 19-pin x 1, Deep Color, compatible with HDCP,
NOTE: Compatible with non-interlaced signals only. | |
| Terminals | DVI-D In | DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only | DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible,
for single link only | |
| Terminals | RGB 1 In | BNC x 5 | BNC x 5 | |
| Terminals | RGB 1 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. | |
| Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms | Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms | |
| Terminals | RGB 1 In | Video in | BNC x 1, 1.0 Vp-p 75 ohms
Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms | BNC x 1, 1.0 Vp-p 75 ohms
Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms | |
| Terminals | RGB 2 In | D-sub HD 15-pin (female) x 1 | D-sub HD 15-pin (female) x 1 | |
| Terminals | RGB 2 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | |
| Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | |
| Terminals | 3D Sync 1 In/Out | BNC x 1, 1.0 Vp-p, 75 ohms
Input: TTL, high impedance. Output: TTL, max. 10 mA | BNC x 1, 1.0 Vp-p, 75 ohms
Input: TTL, high impedance. Output: TTL, max. 10 mA | |
| Terminals | 3D Sync 2 Out | BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA | BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA | |
| Terminals | Serial In | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals | Serial Out | D-sub 9-pin (male) x 1 for link control | D-sub 9-pin (male) x 1 for link control | D-sub 9-pin (male) x 1 for link control |
| Terminals | Remote 1 In | M3 jack x 1 for wired remote control | M3 jack x 1 for wired remote control | |
| Terminals | Remote 1 Out | M3 jack x 1 for link control | M3 jack x 1 for link control | |
| Terminals | Remote 2 In | D-sub 9-pin (female) x 1 for external control (parallel) | D-sub 9-pin x 1 for external control (parallel) | D-sub 9-pin x 1 for external control (parallel) |
| Terminals | DIGITAL LINK | RJ-45 x 1 (for network, DIGITAL LINK connection (HDBaseT™ compatible),
100Base-TX,compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP2.2) | RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible | RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible |
| Terminals | Expansion Slot | x 2 (SLOT 1，SLOT 2), SLOT NX (Compatible with Optional Board) | ||
| Power Supply | AC 100-240 V, 50/60 Hz
(Note: Brightness may decrease depending on power conditions) | AC 100-240 V 50/60 Hz | AC 100-240 V 50/60 Hz |
| Power Consumption | 1,270 W (0.3 W with STANDBY MODE set to ECO. 4 W with
STANDBY MODE set to NORMAL.),
Average power consumption
NORMAL: 913W ECO: 782W LONG LIFE1: 531-732W
LONG LIFE 2: 477-702W LONG LIFE 3: 423-665W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in),
ICE627087: 2008 Broadcast contents,
Picture mode: Dynamic, Dynamic Contrast3 | 1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.),
Average power consumption
NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W
LONG LIFE 3: 550W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in),
ICE627087: 2008 Broadcast contents,
Picture mode: Dynamic, Dynamic Contrast3 | 1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.),
Average power consumption
NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W
LONG LIFE 3: 550W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in),
ICE627087: 2008 Broadcast contents,
Picture mode: Dynamic, Dynamic Contrast3 |
| Cabinet Materials | Molded plastic | Molded plastic | Molded plastic |
| Operation Noise | 46 dB | 43 dB | 43 dB |
| Operating Temperature | Ambient operating temperature: 0°C to 45°C (32 °F to 113 °F).
Ambient operating humidity: 10% - 80% (no condensation)
When the operating mode is set to "Normal", the operating temperature range is 0°C to 45°C (32 °F to 113 °F), and at altitudes from 1,400 m to 4,200 m
(4,593 ft to 13,780 ft) it is 0°C to 40°C (32 °F to 104 °F).
When the operating mode is set to "Eco", or "Long Life 1/2/3", the operating
temperature range is 0°C to 40°C (32 °F to 104 °F).
When the projector is used with a Smoke Cut Filter, the operating temperature range is 0°C to 35°C (32 °F to 95 °F).
Furthermore, when the operating mode is set to "Eco", or "Long Life 1/2/3",the projector cannot be used at altitudes above 2700 m (8,858 ft). In addition,
when the projector is used with a Smoke Cut Filter, it cannot be used at altitudes above 1,400 m (4,593 ft). The brightness of the light source may drop depending on the operating environment and the operating temperature range in order to protect the projector. | Normal
The operating temperature range is 0°C to 50°C (32 °F to 122 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.)
Eco/Long life 1/2/3
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.)
When the projector is used with a Smoke Cut Filter
The operating temperature range is 0°C to 40°C (32 °F to 104 °F).
(The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.)
* The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be. | Normal
The operating temperature range is 0°C to 50°C (32 °F to 122 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.)
Eco/Long life 1/2/3
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.)
When the projector is used with a Smoke Cut Filter
The operating temperature range is 0°C to 40°C (32 °F to 104 °F).
(The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.)
* The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be. |
| Dimensions | 578 x 323.5 x 740 mm
(22-3/4 x 12-23/32 x 29-1/8 inches) (with projections)
578 x 270 x 725 mm
(22-3/4 x 10-5/8 x 28-17/32 inches) (without lens, feet or projections) | 578 x 323.5 x 740 mm
(22-3/4 x 12-23/32 x 29-1/8 inches) (without lens) | 578 x 323.5 x 740 mm
(22-3/4 x 12-23/32 x 29-1/8 inches) (without lens) |
| Weight | 49 kg (108.0 lbs) (without lens) | 44 kg (97.0 lbs) (without lens) | 44 kg (97.0 lbs) (without lens) |
| Applicable Software/Application | Logo Transfer Software, Multi Monitoring & Control Software,
Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit) | Logo Transfer Software, Multi Monitoring & Control Software,Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit) | Logo Transfer Software, Multi Monitoring & Control Software,
Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit) |
Zubehör & Software
Digital Interface Box
ET-YFB100G
Die Kombination von ET-YFB100G mit einem DIGITAL LINK-fähigem Gerät ermöglicht die Übertragung der Video-, Audio- und Steuersignale über ein einzelnes Kabel.
Showing 1 of 1
Digital Interface Box
ET-YFB100G
Die Kombination von ET-YFB100G mit einem DIGITAL LINK-fähigem Gerät ermöglicht die Übertragung der Video-, Audio- und Steuersignale über ein einzelnes Kabel.
Showing 1 of 1
DIGITAL LINK Switcher
ET-YFB200G
2 x DIGITAL LINK (auf Basis der HDBaseT™-Technologie) Ausgabe unkomprimierter digitaler HD-Video-, Audio- und Steuersignale an zwei Projektoren/Displays.
Showing 1 of 1
DIGITAL LINK Switcher
ET-YFB200G
2 x DIGITAL LINK (auf Basis der HDBaseT™-Technologie) Ausgabe unkomprimierter digitaler HD-Video-, Audio- und Steuersignale an zwei Projektoren/Displays.
Showing 1 of 1
VERFÜGBAR AB CY2024 Q3
Lenses for 3-Chip DLP < 35.000 lumens
ET-D3LEU101
Deliver Spectacular Images at Short Distance with New Zero-Offset Lenses
Lenses for 3-Chip DLP < 35.000 lumens
ET-D75MC1
Abdeckung für Objektivmotoren für 3-DLP-Projektoren
Lenses for 3-Chip DLP < 35.000 lumens
ET-D3LEF70
Großer Betrachtungswinkel von 91,5° für maximale Abdeckung der Projektionsfläche mit einem einzelnen Projektor.
Lenses for 3-Chip DLP < 35.000 lumens
ET-D3LEW50
Abbildungsverhältnis 0,7:1 (WUXGA)
Showing 4 of 4
Filters
ET-EMF330
Eco-Filter
Filters
ET-SFR330
Rauchfilter
Showing 2 of 2
Autoscreen Adjustment
ET-CUK10_CUK10P
Erweitert die Software Geometry Manager Pro und gestattet die automatische Anpassung von Multi-Screen-Projektionen oder Projektionen auf gekrümmte Flächen.
Showing 1 of 1
Software
Multi Monitoring and Control Software
Fernbedienung, Überwachung und aktuelle Berichte über den Zustand Ihrer Projektoren und Displays über das Intranet.
Showing 1 of 1
Brackets
ET-PKD520S
Niedrige Deckenmontagehalterung
Showing 1 of 1
Frames
ET-RFD60
The rental frames are sturdy, strong and visually appealing. In addition, they offer a horizontal and vertical adjustment feature for the ideal projector position.
Showing 1 of 1
Media Processor
ET-FMP20
Medienprozessoren vereinfachen Multi-Projektions-Workflows für immersive Erlebnisse
Media Processor
ET-FMP50
Medienprozessoren vereinfachen Multi-Projektions-Workflows für immersive Erlebnisse
Showing 2 of 2
Media Processor
ET-FMP20
Medienprozessoren vereinfachen Multi-Projektions-Workflows für immersive Erlebnisse
Media Processor
ET-FMP50
Medienprozessoren vereinfachen Multi-Projektions-Workflows für immersive Erlebnisse
Showing 2 of 2
Ressourcen & Downloads
Showing 12 of 46
Showing 12 of 14
Sorry there was an error...
The files you selected could not be downloaded as they do not exist.
Sie haben Dokument ausgewählt..
Continue to select additional items or download selected items together as a zip file.
Sie haben 1 Dokument ausgewählt.
Wählen Sie weitere Dokumente aus oder laden Sie die aktuelle Auswahl herunter.
Seite teilen
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: