1-Chip DLP™ Projektor mit Festobjektiv und echter 4K-Auflösung

PT-FRQ60

6.000 lm PT-FRQ60 1-Chip DLP™ 4K-Projektor liefert homogene, hochauflösende Bilder für ein detailreiche visuelles Erlebnisse

Technische Daten Seite teilen

Key features of PT-FRQ60

Hauptmerkmale

Smooth and Detailed 4K Image Quality

Quad Pixel Drive creates sharp, detailed 4K images with Rich Color Enhancer achieving vivid, accurate color. High-speed processing supports 240 Hz/1080p frame rates with latency of 8 ms or less⁴ for smooth, grid-less images.

More information

Flexible, Simple to Use, and Easy to Integrate

V/H Lens-Shift and 2.0x zoom enhance installation flexibility while two CEC-compatible HDMI^® inputs and DIGITAL LINK integrate into 4K infrastructure. Free Grid simplifies operation of Geometric Adjustment functions using only the projector remote control.

More information

Highly Reliable Low- Maintenance Projection

Filterless heat-pipe-based cooling and hermetically sealed optical block support 20,000-hour⁵ maintenance-free projection. Optional Early Warning Functions⁶ streamline management and enhance reliability in museums, classrooms, and offices.

More information

PROJECTOR TYPE	1-CHIP DLP™ LASER PROJECTORS
MODEL	PT-FRQ50	PT-FRQ60
BRIGHTNESS	5,200 lm¹ / 5,400 lm (Center)²	6,000 lm¹ / 6,200 lm (Center)²
RESOLUTION	4K (3840 x 2160 pixels)³	4K (3840 x 2160 pixels)³

^{1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL].}
^{2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode.}
^{3 With Quad Pixel Drive.}
^{4 Display frame rate corresponds to the input signal frame rate. Geometric adjustment features must be disabled.}
^{5 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of particulate matter).}
^{6 Sales of new licenses for ET-SWA100 Early Warning Functions ended in March 2024.}

Smooth and Detailed 4K Image Quality

Quad Pixel Drive for Detail-rich 4K Images with High Frame Rates

Quad Pixel Drive, Panasonic’s original 2-axis pixel-quadrupling technology, rapidly shifts each pixel vertically and horizontally to produce sharp, clear, and detail-rich 4K images for a maximum resolution of 3840 x 2160 pixels (16:9). Combined with the DMD’s high pixel-density and narrow aperture ratio, Quad Pixel Drive creates smooth, filmlike images with a superior sense of depth and definition, allowing viewers to retain complex information.

Rich Color Enhancer Produces Vivid, Accurate Colors

Rich Color Enhancer is an original Panasonic color optimization technology for 1-Chip DLP™ projectors that offers two selectable modes. Dynamic Mode balances brightness and color for clear image visibility in well-lit environments. Standard/Graphic Mode optimizes color reproduction performance by adjusting color-wheel timing to expand red-channel output, leading to more naturally vibrant red expression. Colors are deep, rich, and accurate, faithfully reflecting the content creator’s artistic intent.

Smooth Playback of 240 Hz Content

The projector smoothly plays 240 Hz/1080p video content with a minimal input-to-output latency of just 8 ms or less¹, perfect in any application where fast response and fluid motion are important. PT-FRQ60 Series also works with Panasonic’s optional ET-SWR10² Real-Time Tracking
Projection-Mapping System, a ready-to-use Software Development Kit (SDK) that enables image projection onto fast-moving objects at up to 240 fps, making it easy to add lifelike interactivity to your museum exhibit.

_{1 Display frame rate corresponds to the input signal frame rate. Geometric adjustment features must be disabled.}
_{2 ET-SWR10 is used in conjunction with third-party devices (sold separately). Compatibility with third-party devices cannot be guaranteed. Other limitations apply. For more information, visit the ET-SWR10}_webpage_.

Dynamic Contrast Elevates Image Realism

Dynamic Contrast directly modulates light output to achieve high contrast with less power consumption. Digitally controlled frame-by-frame
scene-linking modulation ensures precise light output adjustment for accurate contrast even when bright and dark scenes frequently interchange.

Flexible, Simple to Use, and Easy to Integrate

Flexible 2.0x Zoom Lens with Wide-Range V/H Lens-Shift

Versatile 2.0x optical zoom lens clears a path to stress-free installation by expanding throw-distance flexibility, giving you more freedom to choose a mounting position for the projector. Wide-range V/H Lens-Shift (Vertical: +71 %, -48 % and Horizontal: +34 %, -27 %) locates the image as desired when the ideal projector placement isn’t possible, such as in rooms with high ceilings or for projection at an angle. Adjustments are easily performed via joystick on the front panel.

Geometric Adjustment with Free Grid for Screen Adjustment via Remote Control

Free Grid simplifies operation of select Geometric Adjustment functions built into the projector. Using only the projector remote control, with no need of a connected PC, installers can correct image distortion caused by uneven surfaces or irregular objects on flat or curved screens. A grid is overlaid on the projected image, allowing the installer to reshape distorted areas by adjusting the position of node or V/H line control-points. Grids of 2 x 2,
4 x 4, 8 x 8, or 16 x 16 lines are selectable according to required granularity, and work progress is saved automatically. Grid and control-point colors are selectable to ensure clear visibility over the image.

Remote Preview Lite

Remote Preview Lite¹ allows the projectionist to check signal connectivity and to evaluate changes to the image when selected projector image adjustment settings are changed by previewing input video on a laptop screen. Remote Preview Lite works even when the projector is in Standby Mode and eliminates need for on-screen projection immediately before the presentation commences. It reduces chance of display issues before the performance, and if an error is detected, helps narrow down the possible cause to the input signal chain.

_{1 Requires Multi Monitoring & Control Software Version 3.2 or later.}

Features 2x HDMI® CEC-Compatible Inputs for Easy Operation

Two 4K-ready HDMI inputs support CEC commands from compatible devices, allowing the projector to turn ON/OFF with the source device. Add optional Wireless Presentation System PressIT¹ and share content from almost any device with a single press of a button. As with other compatible streaming devices, PressIT can be powered via built-in 5 V/2 A USB-DC terminal for self-contained on-ceiling installation. Compatibility with HDCP 2.3-protected 4K/60p video promotes smooth integration into your existing 4K-ready system infrastructure.

_{1 Availability may vary by country or region. For more information on Wireless Presentation System PressIT, please click}_here_.
_{2 Device’s USB Type-C terminal requires support for DisplayPort™ ALT Mode (image output function) and DC power supply (5 V/0.9 A). Refer to the}_{product manual}_{for more information. Android™ devices require a dedicated app.}

_{Note: Accessories sold separately. Operation with third-party devices cannot be guaranteed.}

PT-FRQ60 Series - Features 2x HDMI® CEC-Compatible Inputs for Easy Operation - Asset 2

4K DIGITAL LINK Connection and Separate LAN Terminal

4K DIGITAL LINK transmits uncompressed 4K/60p (4.2.0) video¹, audio², and control commands through a single CAT 5e or higher STP cable for distances of up to 50 m³. Optional ET-YFB200G DIGITAL LINK Switcher⁴ or ET-YFB100G Digital Interface Box⁴ simplify installation, reduce cabling and associated cost, and enhance system reliability. Alternatively, you can transmit 100Base-TX or 10Base-T compatible control signals via a separate LAN terminal, freeing up the 4K DIGITAL LINK connection for video-signal transmission.

_{1 4K input signals are resized to the projector’s resolution.}
_{2 Audio transmission depends on model’s audio capability.}
_{3 150 m (492 ft) transmission available with ET-YFB200G DIGITAL LINK Switcher for signals up to 1080p.}
_{4 Optional ET-YFB200G DIGITAL LINK Switcher and ET-YFB100G Digital Interface Box are not compatible with 4K signals.}

Highly Reliable Low- Maintenance Projection

Multi-Laser Drive Engine with Unique Failover Circuitry

Failover Circuitry¹ limits brightness loss in the unlikely event of a single diode failure. Multi Laser Drive Engine² features redundant laser modules that maintain image display even if a laser module fails. Failover Circuitry provides an invaluable layer of insurance in situations where image display must not be interrupted.

_{1 Specifications vary depending on projector model.|}
_{2 Rate of brightness decrease varies depending on projector model.}

20,000 Hours of Maintenance-Free Operation

To assure stable and reliable continuous operation, Panasonic implements a refined heat-pipe-based cooling system within the projector’s compact, easy-to-manage body dimensions. This filterless cooling system draws heat away from the optical block, which is hermetically sealed to prevent dust ingress in compliance with the industry’s toughest dust-proofing guidelines. Low-degradation laser modules, inorganic phosphor wheel, and filterless cooling system design contribute to 20,000 hours¹ of maintenance-free projection.

_{1 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m³ of particulate matter).}

24/7 Continuous Operation

Supported by high-efficiency liquid cooling system, hermetically sealed and dust-resistant optical block, and low-degradation diodes grouped into multiple modules, SOLID SHINE Laser projectors can operate reliably 24 hours a day. These projectors are suited to continuous projection in exhibition and public display applications.

Multi Monitoring & Control Software

Panasonic’s free AV management software for Windows^® PC lets you monitor and control up to 2,048 compatible display devices of any brand via LAN to reduce maintenance hassle within display networks of any scale. The software enables status monitoring, control-command execution, content playlist delivery, playback scheduling, and system map visualization.

_{Note: Download Multi Monitoring & Control Software}_here_.

PT-FRQ60 Series - Multi Monitoring & Control Software

Other Features

Reduces Distractions for Better Focus and Immersion

When background noise must be kept to a minimum, Quiet Mode supports almost indiscernible 28 dB¹ operation, limiting distractions in immersive projection environments as well as in office meeting spaces, boardrooms, and classrooms where audience attention must stay focused on the projected content.

_{1 For PT-FRQ50 in QUIET Mode (35 dB in NORMAL/ECO Mode). Operating noise for PT-FRQ60 is 31 dB (QUIET Mode) and 36 dB (NORMAL/ECO Mode). Brightness is reduced when operating the projectors in ECO Mode.}

System Daylight View 3

System Daylight View 3 is the premium implementation of Panasonic’s System Daylight View technology. It supports six levels of user-selectable adjustment. To combat the effect of ambient light on the projected image and boost color impact in projection-mapping applications, sharpness, gamma curves, color, and brightness are all optimized to suit on-site conditions.

Multi-Unit Brightness and Color Control

Sensors detect color and brightness apparent on screen. Projectors automatically calibrate for a uniform multi-screen image, adding a layer of convenience and cost saving for long-term deployments.

Multi-Screen Support System

Optimally adjusts multiple screens with edge blending, color matching, and digital image enlargement.

Quick Start and Quick Off

Since the laser light-source doesn’t require time to warm up, images appear almost instantly. There’s also no safe cool-down required when disconnecting power—the projector can be turned on and off any time as necessary.

Data-Cloning Function

Data-cloning function¹ allows various settings and configuration data to be copied from a main projector to up to 99 sub projectors via LAN. This simplifies and expedites the setup process for multi-unit projection applications.

_{1 Cloneable data excludes passwords, projector name/ID, and network settings. Data-cloning function is supported among identical projectors only.}

Additional Features

Supports IPv6¹
Supports 21:9 (2560 x 1080, 3440 x 1440) signal input²
Supports Crestron Connected™ V2, Crestron XiO Cloud™², Art-Net DMX, AMX^® DD, and PJLink™
DICOM Simulation Mode
Free 360° installation
Laser safety guaranteed

_{1 Main firmware version must be 3.00 or higher. Optional AJ-WM50 Series Wireless Module is not compatible with IPv6.}
_{2 Main firmware version must be 3.00 or higher.}

Specifications of PT-FRQ60

Tabelle der Spezifikationen

Projector type	1-Chip DLP^TM projector
Display method	DLP^TM chip x 1, DLP^TM projection system
Display Device -> Panel size	16.5 mm (0.65 in) diagonal (16:9 aspect ratio)
Display Device -> Number of pixels^*1	1920 x 1080 pixels (If a signal other than 120 Hz/240 Hz is input, it cannot be displayed at this resolution.)
Light source	Laser diodes
Light output^2^3	6,000 lm
Light output (ANSI)^*4	6,000 lm
Light output (Center)^*5	6,200 lm (Center)

Technische Daten Download full specifications

Zubehör & Software

Brackets

ET-PKD120H

High ceiling mount bracket

Produkt anzeigen

Brackets

ET-PKD120S

Niedrige Deckenmontagehalterung

Produkt anzeigen

Brackets

ET-PKD130B

Produkt anzeigen

Showing 3 of 3

Media Processor

ET-FMP20

Medienprozessoren vereinfachen Multi-Projektions-Workflows für immersive Erlebnisse

Produkt anzeigen

Key Features
Flexibles Design rationalisiert die Installation
Einfache und dennoch hochpräzise Einstellung
Reibungslose und kontinuierliche Wiedergabe von Inhalten

Media Processor

ET-FMP50

Medienprozessoren vereinfachen Multi-Projektions-Workflows für immersive Erlebnisse

Produkt anzeigen

Key Features
Flexibles Design rationalisiert die Installation
Einfache und dennoch hochpräzise Einstellung
Reibungslose und kontinuierliche Wiedergabe von Inhalten

Showing 2 of 2

Media Processor

ET-FMP20

Medienprozessoren vereinfachen Multi-Projektions-Workflows für immersive Erlebnisse

Produkt anzeigen

Key Features
Flexibles Design rationalisiert die Installation
Einfache und dennoch hochpräzise Einstellung
Reibungslose und kontinuierliche Wiedergabe von Inhalten

Media Processor

ET-FMP50

Medienprozessoren vereinfachen Multi-Projektions-Workflows für immersive Erlebnisse

Produkt anzeigen

Key Features
Flexibles Design rationalisiert die Installation
Einfache und dennoch hochpräzise Einstellung
Reibungslose und kontinuierliche Wiedergabe von Inhalten

Showing 2 of 2

PressIT

PressIT - Drahtloses Präsentationssystem

Kompatibel mit 6 GHz-WLAN. Neue drahtlose "PressIT" Präsentationssystem-Generation mit hochwertiger Videoübertragung und verbesserter Installationsflexibilität veröffentlicht - Schließen Sie einfach den Sender an und zeigen Sie 4K-Bilder per Knopfdruck auf dem Bildschirm an.

Produkt anzeigen

Key Features
Keine Softwareinstallation erforderlich. Einfaches Teilen von Bildschirminhalten mit einem Knopfdruck
6 GHz-WLAN Unterstützung. Erhöhte Anzahl von Verbindungskanälen für mehr Flexibilität bei der Installation
Zuverlässige Leistung, die mit Computern mit strikten Sicherheitsanforderungen genutzt werden kann.

Showing 1 of 1

Full specifications

Technische Daten herunterladen

Projector type	1-Chip DLP^TM projector
Display method	DLP^TM chip x 1, DLP^TM projection system
Display Device -> Panel size	16.5 mm (0.65 in) diagonal (16:9 aspect ratio)
Display Device -> Number of pixels^*1	1920 x 1080 pixels(If a signal other than 120 Hz/240 Hz is input, it cannot be displayed at this resolution.)
Light source	Laser diodes
Light output^2^3	6,000 lm
Light output (ANSI)^*4	6,000 lm
Light output (Center)^*5	6,200 lm (Center)
Time until light output declines to 50 % -> NORMAL^*6	20,000 hours [NORMAL]
Time until light output declines to 50 % -> ECO^*6	24,000 hours [ECO]
Time until light output declines to 50 % -> QUIET^*6	20,000 hours [QUIET]
Resolution	4K (3840 x 2160 pixels) (With Quad Pixel Drive)
Contrast Ratio (typ.)^*3	20,000:1 (Full On/Full Off)(When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1]. HDMI signal input)
Screen size (diagonal)	1.02–7.62 m (40–300 in), 16:9 aspect ratio
Center-to-corner zone ratio^*3	90%
Lens	2.0x manual zoom (throw ratio: 1.46–2.93:1), manual focus, F 2.0–3.4, f 21.5–43.0 mm
Lens shift -> Vertical(from center of screen)	+71 %, -48 % (manual)
Lens shift -> Horizontal(from center of screen)	+34 %, -27 % (manual)
Keystone correction range	Vertical: ±40 °, Horizontal: ±20 °
Installation	Ceiling/floor, front/rear, free 360-degree installation
Terminals -> HDMI^™ IN	HDMI^TM 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input*6), CEC supported
Terminals -> COMPUTER IN（D-SUB 15pin）	D-sub HD 15-pin (female) x 1 (RGB/YP_BP_R/YC_BC_R)
Terminals -> COMPUTER OUT（D-SUB 15pin）	D-sub HD 15-pin (female) x 1(RGB/YP_BP_R/YC_BC_R)
Terminals -> AUDIO IN(M3 Stereo Mini Jack)	M3 stereo mini-jack x 2
Terminals -> AUDIO OUT(M3 Stereo Mini Jack)	M3 stereo mini-jack x 2
Terminals -> SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals -> DIGITAL LINK IN / LAN	RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT^TM compliant), 100Base-TX (Compatible with PJLink^TM [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p signal Input*7, Extron XTP®)
Terminals -> LAN	RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink^TM [Class 2], Art-Net)
Terminals -> USB TYPE A	USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory,and for power supply (DC 5 V, maximum 2 A)
Terminals -> SLOT	IPv4, IPv6*8
Protocol versions	IPv4, IPv6^*9
Power supply	AC 100–240 V, 50/60 Hz, AC 110 V, 60 Hz (Taiwan)
Maximum power consumption	505 W (5.5–2.4 A) (525 VA)
On-mode power consumption(Operating mode) -> Normal	[NORMAL] 445 W
On-mode power consumption(Operating mode) -> Eco	[ECO] 355 W
On-mode power consumption(Operating mode) -> Quiet	[QUIET] 355 W
Standby power consumption -> Normal	15 W （Standby Mode）［NORMAL］
Standby power consumption -> ECO	0.5 W （Standby Mode）［ECO］
Cabinet materials	Molded plastic
Filter	No
Operation noise -> Normal^*3	36 dB [NORMAL]
Operation noise -> Eco^*3	36 dB [ECO]
Operation noise -> Quiet^*3	31 dB [QUIET]
Dimensions (W x H x D)^*10	498 x 168 x 492 mm (19 5/8˝ x 6 5/8˝ x 19 3/8˝ )
Dimensions (W x H x D) -> Width (not including protruding parts)	498 mm (19 5/8˝)
Dimensions -> Height (including protruding parts)	168 mm (6 5/8˝)
Dimensions -> Depth (not including protruding parts)	492 mm (19 3/8˝ )
Weight [kg]^*11	Approx. 16.4 kg (36.2 lbs)
Operating environment -> Operating temperature^*12	0–45 °C (32–113 °F)
Operating Environment -> Operating humidity (No condensation)	10–80 % (no condensation)
Applicable software	Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Projector Network Setup Software
Control function via LAN	Crestron Connected^TM V2, Crestron XiO Cloud^TM*12, Art-Net DMX, AMX® DD, and PJLink^TM (Class 2)
Fußnote	If a signal other than 120 Hz/240 Hz is input, it cannot be displayed at this resolution. When [PICTURE MODE] is set to [DYNAMIC], [DAYLIGHT VIEW] is set to [OFF], [DYNAMIC CONTRAST] is set to [OFF], [LIGHT OUTPUT] is set to [100%], and [AUTO POWER SAVE] is set to [OFF]. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped. Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped. Average light-output value of all shipped products measured at the center of the screen. Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C [86 °F], elevation 700 m [2,297 ft] with 0.15 mg/m3 of particulate matter). Estimated time until light output declines to 50 % varies depending on environment. 4K/60p signals are converted to the projector's resolution upon projection. 4K/60p signals are converted to projector’s resolution. Supports YPBPR 4:2:0 format only. Main firmware version must be 3.00 or higher. Optional AJ-WM50 Series Wireless Module is not compatible with IPv6. With legs fully retracted. Average value. May differ depending on the actual unit. When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 35 °C (95 °F) or higher, the light output may be reduced to protect the projector. When optional AJ-WM50 Series Wireless Module is attached, operating temperature range becomes 0–40 °C (32–104 °F). Main firmware version must be 3.00 or higher.

1-Chip DLP™ Projektor mit Festobjektiv und echter 4K-Auflösung

PT-FRQ60

Key features of PT-FRQ60

Hauptmerkmale

Smooth and Detailed 4K Image Quality

Flexible, Simple to Use, and Easy to Integrate

Highly Reliable Low- Maintenance Projection

Smooth and Detailed 4K Image Quality

Quad Pixel Drive for Detail-rich 4K Images with High Frame Rates

Rich Color Enhancer Produces Vivid, Accurate Colors

Smooth Playback of 240 Hz Content

Dynamic Contrast Elevates Image Realism

Flexible, Simple to Use, and Easy to Integrate

Flexible 2.0x Zoom Lens with Wide-Range V/H Lens-Shift

Geometric Adjustment with Free Grid for Screen Adjustment via Remote Control

Remote Preview Lite

Features 2x HDMI® CEC-Compatible Inputs for Easy Operation

4K DIGITAL LINK Connection and Separate LAN Terminal

Highly Reliable Low- Maintenance Projection

Multi-Laser Drive Engine with Unique Failover Circuitry

20,000 Hours of Maintenance-Free Operation

24/7 Continuous Operation

Multi Monitoring & Control Software

Other Features

Reduces Distractions for Better Focus and Immersion

System Daylight View 3

Multi-Unit Brightness and Color Control

Multi-Screen Support System

Quick Start and Quick Off

Data-Cloning Function

Additional Features

Specifications of PT-FRQ60

Tabelle der Spezifikationen

Zubehör & Software

ET-PKD120H

ET-PKD120S

ET-PKD130B

ET-FMP20

ET-FMP50

ET-FMP20

ET-FMP50

PressIT - Drahtloses Präsentationssystem

Ressourcen & Downloads