PT-CMZ50

^{1 Input signals are converted to the projector’s resolution upon playback. YPBPR 4:2:0 format only for 4K/30p signals input via DIGITAL LINK.  2 Optional accessories sold separately. Availability may vary by country or region. 3 When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. Measurement, measuring conditions, and method of notation are all compliant with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. 4 Value is the distance from front panel to screen. 5 Full On/Full Off, when [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1]. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. 6 Based on comparison between PT-CMZ50 (max. power consumption 350 W, brightness 5,200 lm) and PT-TW381R (max. power consumption 300 W, brightness 3,300 lm). 7 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C [86 °F], elevation 700 m [2,297 ft] with 0.15 mg/m3 of particulate matter). Estimated time until light output declines to 50 % varies depending on environment. Filter can be washed and reused up to two times. Filter cleaning cycle: 20,000 hours (under dust conditions of 0.08 mg/m3), 10,000 hours (under dust conditions of 0.15 mg/m3). 8 Resolution decreases when using Digital Zoom Extender and Image Shift. Some screen-correction functions are not available when using this function, and range of corner adjustment is limited. Image size is reduced to 80 % when Digital Image Shift is enabled. 9 Value in QUIET Mode. 35 dB in NORMAL/ECO Mode. 10 A 2560 x 1080 (21:9) input signal is displayed at 1920 x 810 (21:9), and a 3240 x 1080 (27:9) input signal at 1920 x 640 (27:9). 11 When [ECO MANAGEMENT] > [QUICK STARTUP] is set to [ON]. [QUICK STARTUP] is unavailable after the [AVAILABLE PERIOD] setting has expired. When [QUICK STARTUP] is set to [ON], the projector continues to warm up, increasing power consumption, and the standby period when [QUICK STARTUP] is valid is included in projector runtime. [QUICK STARTUP] cannot be set when [STANDBY MODE] is set to [ECO]. May vary depending on connection terminals, signals, and other conditions. 12 Depending on the connected CEC command-compatible device, the link control may not operate normally.}