| Projector type | LCD projectors |
|---|
| Panel Size | 19.3 mm (0.76 in) diagonal (16:10 aspect ratio) |
|---|
| Display Method | Transparent LCD panel (x 3, R/G/B) |
|---|
| LCD Panel | |
|---|
| Drive Method | Active matrix |
|---|
| Pixels | 2,304,000 (1920 x 1200) pixels x 3 |
|---|
| Light Source | Laser diodes |
|---|
| Light output 1, 2 | 7,500 lm |
|---|
| Time until light output declines to 50 %3 | 20,000 hours (NORMAL/QUIET), 24,000 hours (ECO) |
|---|
| Resolución | WUXGA (1920 x 1200 pixels) |
|---|
| Contrast ratio 2 | 3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1] or [2]. HDMI™ signal input) |
|---|
| Lens | Powered zoom (throw ratio 1.61–2.76:1), powered focus F = 1.7–2.3, f = 26.8–45.5 mm (for supplied lens; optional lenses also available) |
|---|
| Screen Size (Diagonal) | 1.02–10.16 m (40–400 in), 1.52–10.16 m (60–400 in) with the ET-ELW22, 2.54–10.16 m (100–400 in) with the ET-ELU20, 16:10 aspect ratio |
|---|
| Center-to-corner zone ratio2 | 85 % |
|---|
| Lens shift Vertical (From the origin point of the lens mounter) | ±67 % (powered), ±60 % (with ET-ELW22), ±50 % (with ET-ELU20) (TBD) |
|---|
| Keystone Correction Range | Vertical: ±25 ° (±22 ° with ET-ELW21/ET-ELW22); (±25 ° with ET-ELW20/ET-ELT22/ET-ELT23); (±5 ° with ET-ELU20), Horizontal: ±30 ° (±15 ° with ET-ELW21/ET-ELW22); (±30 ° with ET-ELW20/ET-ELT22/ET-ELT23); (0 ° with ET-ELU20) |
|---|
| Instalación | Ceiling/floor, front/rear, free 360-degree installation |
|---|
| Lens shift Horizontal (From the origin point of the lens mounter) | ±35 % (powered), ±30 % (with ET-ELW22), ±24 % (with ET-ELU20) (TBD) |
|---|
| Audio In | M3 stereo mini-jack x 1 |
|---|
| Monitor Out | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) |
|---|
| Remote 1 In | M3 stereo mini-jack x 1 for wired remote control |
|---|
| Remote 2 In | D-sub 9-pin (female) x 1 for external control (parallel) |
|---|
| Terminals | |
|---|
| Computer In | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) |
|---|
| MULTI SYNC OUT | D-sub 9-pin (male) x 1 for link control |
|---|
| HDMI™ IN | HDMI™ x 3 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input4), CEC supported |
|---|
| SERIAL/MULTI SYNC IN | D-sub 9-pin (female) x 1 for external control/link control (RS-232C compliant) |
|---|
| LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) |
|---|
| DC Out | USB Type A x 1 (for power supply, DC 5 V, 2 A) |
|---|
| Audio Out | M3 stereo mini-jack x 1 |
|---|
| DIGITAL LINK/LAN | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p4, 5 signal input) |
|---|
| Power Supply | AC 100–240 V, 50 Hz/60 Hz |
|---|
| NORMAL | 385 W (AC 100–120 V), 365 W (AC 200–240 V) (TBD) |
|---|
| ECO | 280 W (AC 100–120 V), 270 W (AC 200–240 V) (TBD) |
|---|
| QUIET | 275 W (AC 100–120 V), 265 W (AC 200–240 V) (TBD) |
|---|
| Maximum power consumption 6 | 428 W (4.7–2.3 A) (450 VA) (Power consumption is 408 W at AC 200–240 V) (TBD) |
|---|
| On-mode power consumption (Operating mode) 6 | |
|---|
| Dimensiones (An x Al x Pr) | 561 x 224 x 439 mm (22 3/32˝ x 8 13/16˝ x 17 9/32˝ ) (With legs at shortest position, including lens and protruding parts) |
|---|
| Operating Environment | Operating temperature: 0–45 °C (32–113 °F)8, operating humidity: 10–80 % (no condensation) |
|---|
| Cabinet Materials | Molded plastic |
|---|
| Applicable Software | Logo Transfer Software, Multi Monitoring & Control Software, Smart Projector Control for iOS/Android™, Geometry Manager Pro 9 |
|---|
| Filter | Included (Estimated maintenance time: approx. 20,000 hours) |
|---|
| Operation noise 2 | 33 dB (NORMAL/ECO), 27 dB (QUIET) (TBD) |
|---|
| Weight 7 | Approx. 18.6 kg (41.0 lbs) (with supplied lens) |
|---|
| Nota | 1 When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL].2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. 3 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2]). Estimated time until light output declines to 50 % varies depending on environment. 4 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. 5 YPBPR 4:2:0 format only for 4K/60p and 4K/50p signals input via DIGITAL LINK. 6 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft). 7 Average value. May differ depending on the actual unit. 8 Note that the projector cannot be used at altitudes 2,700 m (8,858 ft) or higher above sea level. In the following operating environments, light output may be reduced to protect the projector: when the projector is used at altitudes below 700 m (2,297 ft) and ambient temperature is 36 °C (97 °F) or higher; when the projector is used at altitudes between 700 m (2,297 ft) and 1,400 m (4,593 ft) exclusive and ambient temperature is 34 °C (93 °F) or higher; when the projector is used at altitudes between 1,400 m (4,593 ft) and 2,100 m (6,890 ft) exclusive and ambient temperature is 32 °C (90 °F) or higher; and when the projector is used at altitudes between 2,100 m (6,890 ft) and 2,700 m (8,858 ft) exclusive and ambient temperature is 30 °C (86 °F) or higher. 9 This projector series does not support some functions available in Geo Pro software. |
|---|
Inicio
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: