Proyectores láser de 1 chip DLP™ para el sector educativo y corporativo

PT-FRZ50

Fáciles de utilizar, los proyectores láser de 1 chip DLP™ ofrecen unas imágenes nítidas en salas iluminadas con una integración flexible en el aula o en las salas de reuniones

View specifications Inicio

Key features of PT-FRZ50

Características principales

Láser de 1 chip DLP, 5200 lúmenes (centro), WUXGA

Tecnología DLP™, Quartet Colour Harmonizer, Rich Colour Enhancer y Dynamic Contrast

No necesita mantenimiento durante un mínimo de 20 000 horas, con un bloque óptico resistente a la entrada de polvo y un motor láser de gran duración

Objetivo flexible con zoom de 2.0x (1,46 – 2,94:1) con desplazamiento del objetivo V/H

Compatible con señales de entrada 4K/60p sin comprimir a través de entradas HDMI® compatibles con HDCP 2.2 o el terminal DIGITAL LINK

	PT-FRZ60	PT-FRZ50	PT-FRZ55
Brightness	6,000 lm^* (ANSI)/ 6,200 lm (Center)	5,200 lm^* (ANSI)/ 5,400 lm (Center)	5,000 lm^* (ANSI)/ 5,200 lm (Centre)
Resolution	WUXGA	WUXGA	WUXGA
Lens	2x zoom lens (1.46 – 2.94:1)	2x zoom lens (1.46 – 2.94:1)	Fixed short throw lens (0.8:1)

PT-FRZ60

PT-FRZ50

PT-FRZ55

Brightness

6,000 lm^* (ANSI)/

6,200 lm (Center)

5,200 lm^* (ANSI)/

5,400 lm (Center)

5,000 lm^* (ANSI)/

5,200 lm (Centre)

Resolution

WUXGA

Lens

2x zoom lens (1.46 – 2.94:1)

Fixed short throw lens (0.8:1)

Dynamic Colour for Bright Rooms

Brilliant Colour Reproduction

Quartet Colour Harmonizer is an original colour-wheel mechanism featuring optimized optical design. It modulates light-output according to the image’s colour requirements, achieving wide-gamut reproduction with pure white for greater colour accuracy and depth without sacrificing brightness. Combined with stable SOLID SHINE Laser brightness and the superior uniformity of DLP™ imaging, colours appear richer and brighter without the greenish cast sometimes experienced with alternative projection technologies.

Rich Colour Enhancer

Rich Colour Enhancer includes a Dynamic Mode that prioritizes image brightness, and a Graphic Mode/Standard Mode to suit graphical content. This mode adjusts colour-wheel timing for deeper colour saturation in situations where projection at maximum brightness is not required.

Quiet, Versatile, and Easy to Install

Wide-Range 2.0x Zoom Lens with Lens-Shift

To smooth the path to stress-free installation, the projectors equip a 2.0x optical zoom lens that supports a wide range of throw-distances while filling your screen with a large, bright image. V/H Lens-Shift (Vertical: +64 %, -44 % and Horizontal: +34 %, -27 %) locates the image on screen when optimal projector placement isn’t possible, such as in rooms with high ceilings or for angled projection applications. The projectors share the same 2.0x zoom lens and lens-shift adjustment as our PT-RZ570 (and will fit the same mounting bracket), making the PT-FRZ60/FRZ50 a streamlined, cost-effective replacement. V/H Keystone Correction (Vertical: ±40 °, Horizontal: ±20 °), curved-screen correction, and Auto Image Rotation function are included to further enhance installation flexibility.

Proven SOLID SHINE Laser Reliability

SOLID SHINE Laser for Dependably High Brightness

PT-FRZ60 and PT-FRZ50 have durable solid-state laser modules in place of a consumable lamp. The benefits of laser projection are emphatically proven, with no need for consumable parts replacement over years of continuous 24/7 projection and a shallower brightness ramp with superior colour uniformity. Experience better picture quality for longer at a comparably lower cost. Another advantage is the ability to switch the unit on and off from the room breaker any time without risking damage to the light-source.

Filterless Cooling and Airtight Optical Block

Implementation of heat-pipe-based cooling with heat-sinks for the DMD block eliminate need for an air filter. These projectors can operate continuously in dusty environments for 20,000 hours without maintenance thanks to a hermetically sealed optical engine that prevents dust intrusion and associated image degradation.

Specifications of PT-FRZ50

Tabla de especificaciones

Projector type	1-Chip DLP^TM projector
Display method	DLP^TM chip x 1, DLP^TM projection system
Display Device -> Panel size	17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
Display Device -> Number of pixels	2,304,000 (1920 x 1200 pixels)
Light source	Laser diodes
Light output^1^2	5,200 lm
Light output (ANSI)	5,200 lm
Light output (Center)^*4	5,400 lm (Center)

View specifications Download specifications

Accesorios y software

Brackets

ET-PKD120H

Soporte de montaje para techos altos

View product

Brackets

ET-PKD120S

Soporte de montaje para techos bajos

View product

Brackets

ET-PKD130B

Bracket assembly

View product

Showing 3 of 3

Interface board/conversion cable

ET-ADSV

D-Sub/S-VIDEO conversion cable

View product

Showing 1 of 1

Showing 0 of 0

PressIT

PressIT - Sistema de Presentación Inalámbrico

Compatible con LAN inalámbrica de 6 GHz. Sistema de presentación inalámbrico "PressIT" con visualización de vídeo de alta calidad y flexibilidad de instalación mejorada - Basta con conectar el transmisor y visualizar imágenes 4K en la pantalla con solo pulsar un botón.

View product

Key Features
No requiere instalación de software. Comparte pantallas fácilmente con solo pulsar un botón
Compatible con LAN inalámbrica de 6 GHz. Más canales de conexión para una mayor flexibilidad en la instalación
Rendimiento confiable que se puede usar en entornos con seguridad estricta

Showing 1 of 1

Aviso conforme a la Ley de Datos de la UE sobre los datos generados por nuestros productos.

Full specifications

Download specifications

Projector type	1-Chip DLP^TM projector
Display method	DLP^TM chip x 1, DLP^TM projection system
Display Device -> Panel size	17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
Display Device -> Number of pixels	2,304,000 (1920 x 1200 pixels)
Light source	Laser diodes
Light output^1^2	5,200 lm
Light output (ANSI)	5,200 lm
Light output (Center)^*4	5,400 lm (Center)
Time until light output declines to 50 % -> NORMAL^*4	20,000 hours [NORMAL]
Resolution	1920 x 1200 pixels
Contrast Ratio (typ.)^*2	20,000:1 (Full On/Full Off, Picture Mode: Dynamic, Dynamic Contrast 1, Operating Mode: Normal)
Screen size (diagonal)	1.02–7.62 m (40–300 in), 16:10 aspect ratio
Center-to-corner zone ratio^*2	90%
Lens	2.0x manual zoom (throw ratio: 1.46–2.94:1), manual focus, F 2.0–3.4, f 21.5–43.0 mm
Lens shift -> Vertical(from center of screen)	+64 %, -44 % (manual)
Lens shift -> Horizontal(from center of screen)	+34 %, -27 % (manual)
Keystone correction range	Vertical: ±40 °, Horizontal: ±20 °
Installation	Ceiling/floor, front/rear, free 360-degree installation
Terminals -> HDMI^™ IN	HDMI^TM 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input*4), CEC supported
Terminals -> COMPUTER IN（D-SUB 15pin）	D-sub HD 15-pin (female) x 1 (RGB/YP_BP_R/YC_BC_R)
Terminals -> COMPUTER OUT（D-SUB 15pin）	D-sub HD 15-pin (female) x 1 (RGB/YP_BP_R/YC_BC_R)
Terminals -> VIDEO IN	Pin jack x 1 (composite video)
Terminals -> AUDIO IN(M3 Stereo Mini Jack)	Pin jack x 1 (L, R)
Terminals -> AUDIO IN(Pin Jack L/R)	M3 x 1
Terminals -> AUDIO OUT(M3 Stereo Mini Jack)	M3 x 1 (Variable)
Terminals -> SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals -> DIGITAL LINK IN / LAN	RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT^TM compliant), PJLink^TM (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.3 compatible, Deep Color compatible, 4K/60p signal input*4
Terminals -> LAN	RJ-45 x 1 for network connection, PJLink^TM (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals -> USB TYPE A	USB connector (Type A) x 1 (Output 5 V/2 A)
Power supply	AC 100–240 V, 50/60 Hz
Maximum power consumption^*11	465 W (5.0–2.0 A)
On-mode power consumption(Operating mode) -> Normal^*11	[NORMAL] 370 W
On-mode power consumption(Operating mode) -> Eco^*11	[ECO] 295 W
On-mode power consumption(Operating mode) -> Quiet^*11	[QUIET] 295 W
Standby power consumption -> Normal	10 W （Standby Mode）［NORMAL］
Standby power consumption -> ECO^*1	0.5 W （Standby Mode）［ECO］
Cabinet materials	Molded plastic
Filter^*12	No
Operation noise -> Normal^*2	32 dB [NORMAL]
Operation noise -> Quiet^*2	27 dB [QUIET]
Dimensions (W x H x D)	498 x 1685 x 492 mm (19 5/8˝ x 6 5/8˝5 x 19 3/8˝ )
Dimensions -> Width (including protruding parts)	498 mm (19 5/8˝)
Dimensions -> Height (including protruding parts)	168 mm (6 5/8˝)
Dimensions -> Depth (including lens)	492 mm (19 3/8˝)
Weight [kg]^*13	Approx. 16.0 kg (35.3 lbs)
Operating environment -> Operating temperature^14^15	0–45 °C (32–113 °F)
Operating Environment -> Operating humidity (No condensation)	10–80 % (no condensation)
Applicable software	Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software
Nota a pie de página	When [PICTURE MODE] is set to [DYNAMIC], [DAYLIGHT VIEW] is set to [OFF], [DYNAMIC CONTRAST] is set to [OFF], [LIGHT OUTPUT] is set to [100%], and [AUTO POWER SAVE] is set to [OFF]. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped. Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped. Average light-output value of all shipped products measured at the center of the screen. Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Normal Mode, Dynamic Contrast 2, temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Estimated time until light output declines to 50 % varies depending on environment. 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®. With legs at shortest position. Average value. May differ depending on the actual unit.
Body Colour	Black/White
NFC	https://docs.connect.panasonic.com/projector/products/smartpjcontrol/regional.html#regional

Proyectores láser de 1 chip DLP™ para el sector educativo y corporativo

PT-FRZ50

Key features of PT-FRZ50

Características principales

Dynamic Colour for Bright Rooms

Brilliant Colour Reproduction

Rich Colour Enhancer

Quiet, Versatile, and Easy to Install

Wide-Range 2.0x Zoom Lens with Lens-Shift

Proven SOLID SHINE Laser Reliability

SOLID SHINE Laser for Dependably High Brightness

Filterless Cooling and Airtight Optical Block

Galería de productos

Specifications of PT-FRZ50

Tabla de especificaciones

Accesorios y software

ET-PKD120H

ET-PKD120S

ET-PKD130B

ET-ADSV

PressIT - Sistema de Presentación Inalámbrico

Recursos y descargas