PT-DX820

Discontinued

1DLP - 8200 lumens - XGA - 2Lamps - RBG Booster, Digital Link

Key features

1-Chip DLP, 8200 lumens, XGA
Dual lamp system with up to 6000 hours lamp life (in eco mode). Lamp relay mode enabes 24/7 operation
Dust-resistant optical engine allows filter-less design
Multi-screen support including edge blending and colour matching function

Aimed at continuous 24-hour operation in public display and signage, as well as rental and staging applications, the DZ780 projectors feature a liquid-cooling system that reduces operating noise to just 30 dB when projecting at full lamp output power.

The dual-lamp projector outputs 7,000 lumens at WUXGA resolution and introduces a host of premium features, normally reserved for flagship large-venue projectors.

Dual lamps and Relay Mode enable continuous 24-hour operation while ensuring uninterrupted playback in the event of lamp failure and, for the first time at this level, high-end System Daylight View 2 joins Panasonic’s proven Dynamic RGB Booster and Detail Clarity Processor technologies to ensure vivid colour reproduction, exceptional detail, and high brightness, even in well-lit spaces.

Functionality is outstanding with geometric adjustment for curved-screen projection and multi-screen support with colour matching and edge blending.

In another exclusive for this class of projector, the DZ780 series is now compatible with Art-Net DMX, a protocol for lighting management. It also features DIGITAL LINK, allowing long distance transmission of up to 1080p content using a single cable connection of up to 150m (100m for WUXGA resolution).

The DZ780 series comprises the PT-DZ780 (7,000 lm, WUXGA), PT-DW750 (7,000 lm, WXGA), and PT-DX820 (8,200 lm, XGA).
 

Specifications table

Power Supply120-240 V AC 9.0-4.0 A, 50/60 Hz
Power Consumption790 W (810 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE set to NORMAL) max. 2,696 BTU (without light output: 2,601 BTU)
DLP™ Chip | Panel Size17.8 mm (0.7 in) diagonal (4:3 aspect ratio)
DLP™ Chip | Display MethodDLP™ chip x 1, DLP™ system
DLP™ Chip | Pixels786,432 (1,024 x 768) x 1, total of 786,432 pixels
LensPT-DX820W/B Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm PT-DX820LW/LB Optional powered zoom/focus lenses and fixed-focus lens
Lamp310 W UHM lamps (x 2)
Screen Size1.27-15.24 m (50- 600 inches) *1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio) *2.54 - 8.89 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio)

Product series

PT-DZ780 Series

PT-DZ780 Series
 
Model
Projector Type
310 W UHM lamps (x 2)
310 W UHM lamps (x 2)
310 W UHM lamps (x 2)
DLP™ Chip | Panel Size
17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
mm (0.65 in) diagonal (16:10 aspect ratio)
17.8 mm (0.7 in) diagonal (4:3 aspect ratio)
DLP™ Chip | Display Method
DLP™ chip x 1, DLP™ system
DLP™ chip x 1, DLP™ system
DLP™ chip x 1, DLP™ system
DLP™ Chip | Number of Pixels
2,304,000 (1,920 x 1,200) x 1, total of 2,304,000 pixels
1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels
786,432 (1,024 x 768) x 1, total of 786,432 pixels
Brightness
7,000 lumens (dual lamp, LAMP MODE: NORMAL)
7,000 lumens (dual lamp, LAMP MODE: NORMAL)
8,200 lumens (dual lamp, LAMP MODE: NORMAL)
Resolution
1,920 x 1,200 pixels
1,280 x 800 pixels
1,024 x 768 pixels
Contrast Ratio
3,000:1 (full on/full off, in dynamic iris 3 mode)
3,000:1 (full on/full off, in dynamic iris 3 mode)
2,400:1 (full on/full off, in dynamic iris 3 mode)
Screen Size
1.27-15.24 m (50- 600 inches) *1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio) *2.54 - 8.89 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio)
1.27-15.24 m (50- 600 inches) *1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio) *2.54 - 8.89 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio)
1.27-15.24 m (50- 600 inches) *1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio) *2.54 - 8.89 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio)
Optical Axis Shift
Vertical: -16% - +50% (powered), horizontal: -10% - +30% (powered) (-10% - +28% with the ET-DLE055/DLE085/DLE105), (Vertical: ±5°) NOTE: Optical If using the ET-DLE030, the optical axis is fixed.
Vertical: -16% - +60% (powered), horizontal: -10% - +30% (powered) (-10% - +28% with the ET-DLE085/DLE105) NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed.
Vertical: -13% - +50% (powered) (-13% - +45% with the ET-DLE085/DLE105) horizontal: -10% - +30% (powered) (-10% - +28% with the ET-DLE085/DLE105) NOTE: Optical If using the ET-DLE030, the optical axis is fixed. axis shift function cannot be operated when used with the ET-DLE055
Lens
PT-DZ780W/DZ780B Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm PT-DZ780LW/DZ780LB Optional powered zoom/focus lenses and fixed-focus lens
PT-DW750W/DW750B Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm PT-DW750LW/DW750LB Optional powered zoom/focus lenses and fixed-focus lens
PT-DX820W/B Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm PT-DX820LW/LB Optional powered zoom/focus lenses and fixed-focus lens
Installation
Ceiling/floor, front/rear
Ceiling/floor, front/rear
Ceiling/floor, front/rear
Terminals | SDI In
BNC x 1, 3G-SDI signal: SMPTE ST 424 compliant HD-SDI signal: SMPTE ST 292 compliant
Terminals | HDMI In
HDMI 19-pin x 1, Deep Color, compatible with HDCP,
HDMI 19-pin x 1, Deep Color, compatible with HDCP
HDMI 19-pin x 1, Deep Color, compatible with HDCP,
Terminals | DVI-D In
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals | RGB 1 In
BNC x 5
BNC x 5
BNC x 5
Terminals | RGB 1 In | R, G, B
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 2 In
D-sub HD 15-pin (female) x 1
D-sub HD 15-pin (female) x 1
D-sub HD 15-pin (female) x 1
Terminals | RGB 2 In | R, G, B
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | Serial In
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | Serial Out
D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals | Remote 1 In
M3 jack x 1 for wired remote control
M3 jack x 1 for wired remote control
M3 jack x 1 for wired remote control
Terminals | Remote 1 Out
M3 jack x 1 for link control
M3 jack x 1 for link control
M3 jack x 1 for link control
Terminals | Remote 2 In
D-sub 9-pin (female) x 1 for external control (parallel)
D-sub 9-pin (female) x 1 for external control (parallel)
D-sub 9-pin (female) x 1 for external control (parallel)
Terminals | DIGITAL LINK
RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™(class 1), Deep Color, compatible with HDCP,
RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP,
RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP,
Terminals | USB
DC OUT (5V/0.9A)
DC OUT (5V/0.9A)
DC OUT (5V/0.9A)
Power Supply
100-240 V AC, 9.0-4.0 A, 50/60 Hz
100-240 V AC, 9.0-4.0 A, 50/60 Hz
120-240 V AC 9.0-4.0 A, 50/60 Hz
Power Consumption
790 W (810 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE max. 2,696 BTU (without light output: 2,601 BTU)
790 W (810 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE set to NORMAL) max. 2,696 BTU (without light output: 2,601 BTU)
790 W (810 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE set to NORMAL) max. 2,696 BTU (without light output: 2,601 BTU)
Operation Noise
30 dB (dual lamp operation, LAMP MODE: NORMAL), 28 dB (dual lamp operation, LAMP MODE: ECO)
30 dB (dual lamp operation, LAMP MODE: NORMAL), 28 dB (dual lamp operation, LAMP MODE: ECO)
30 dB (dual lamp operation, LAMP MODE: NORMAL), 28 dB (dual lamp operation, LAMP MODE: ECO)
Operating Temperature
0-45 °C (32-113 °F)
0-45 °C (32-113 °F)
0-45 °C (32-113 °F)
Cabinet Materials
Molded plastic (PT-DZ780W/DZ780LW : White) (PT-DZ780B/DZ780LB : Black)
Molded plastic (PT-DW750W/DW750LW : White) (PT-DW750B/DW750LB : Black)
Molded plastic (PT-DX820W/DX820LW : White) (PT-DX820B/DX820LB : Black)
Dimensions
498 x 175 x 521 mm (19-19/32 x 6-7/8*3 x 20-1/2 inches) (with supplied lens) 498 x 175 x 508 mm (19-19/32 x 6-7/8*3 x 20 inches) (without lens, with lens cover) 498 x 175 x 498 mm (19-19/32 x 6-7/8*3 x 19-19/32 inches) (without lens and lens cover)
498 x 175 x 521 mm (19-19/32 x 6-7/8 x 20-1/2 inches) (with supplied lens) 498 x 175 x 508 mm (19-19/32 x 6-7/8 x 20 inches) (without lens, with lens cover) 498 x 175 x 498 mm (19-19/32 x 6-7/8 x 19-19/32 inches) (without lens and lens cover)
498 x 175 x 521 mm (19-19/32 x 6-7/8 x 20-1/2 inches) (with supplied lens) 498 x 175 x 508 mm (19-19/32 x 6-7/8 x 20 inches) (without lens, with lens cap) 498 x 175 x 498 mm (19-19/32 x 6-7/8 x 19-19/32 inches) (without lens and lens cap)
Weight
Approx. 17.8 kg (39.2 lbs) (with supplied lens) Approx. 17.0 kg (37.5 lbs) (without lens)
Approx. 17.8 kg (39.2 lbs) (with supplied lens) Approx. 17.0 kg (37.5 lbs) (without lens)
Approx. 17.8 kg (39.2 lbs) (with supplied lens) Approx. 17.0 kg (37.5 lbs) (without lens)
Technology
1-Chip DLP
1-Chip DLP
1-Chip DLP

Accessories & Software

Lenses for 1-Chip DLP

ET-DLE085

0.8-1.0:1 throw ratio (WUXGA)

Lenses for 1-Chip DLP

ET-DLE150

1.3-1.9:1 throw ratio (WUXGA)

Lenses for 1-Chip DLP

ET-DLE250

2.3-3.6:1 throw ratio (WUXGA) 

Lenses for 1-Chip DLP

ET-DLE350

3.6-5.4:1 throw ratio (WUXGA)

Lenses for 1-Chip DLP

ET-DLE450

5.4-8.6:1 throw ratio (WUXGA)

Lenses for 1-Chip DLP

ET-DLE105

1.0-1.3:1 throw ratio (WUXGA)

Lenses for 1-Chip DLP

ET-DLE035

0.380:1 throw ratio (WUXGA) Ultra Short Throw Lens capable of projecting on 100-350 inch diagonal screen sizes.

Showing 7 of 7

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

Showing 1 of 1

Brackets

ET-PKD120H

High ceiling mount bracket

Brackets

ET-PKD120S

Low ceiling mount bracket

Brackets

ET-PKD130H

ET-PKD130H

Brackets

ET-PKD130B

Bracket assembly

Showing 4 of 4

Related resources

Showing 12 of 16

Showing 12 of 27

Sorry there was an error...
The files you selected could not be downloaded as they do not exist.

You selected items.
Continue to select additional items or download selected items together as a zip file.

You selected 1 item.
Continue to select additional items or download the selected item directly.

Download selected file