PT-DW17K2

Discontinued

3DLP - 17000 lumens - WXGA - 4Lamps - Exchangeable lens - 3D /HD-SDI/ Portrait Mode/ Digital Link/ 10000:1

Key features

3-chip DLP, 17000 lumens, WXGA
Compact design, light weight and low noise level (as low as 46db)
Quad-lamp redundancy for failsafe operation
Fully featured for single or multi-mapping installations

Compact 17.000lm*1Projector Delivers Stunning Picture Quality

  • 17.000lm*1 of Brightness with a contrast ratio of 10.000:1 from an extraordinarily compact body
  • Providing a variety of advanced features, such as DIGITAL LINK connectivity, portrait mode capabilityand multi-screen projection

*1 17,000 lm for the PT-DW17K2, and 16,000 lm for the PT-DZ16K2.

Benefits of PT-DW17K2:

1. Ultra High and Detailed Images

  • 17,000 lm of brightness (PT-DW17K2: 17,000 lm, PT-DZ16K2: 16,000 lm) for large venues.
  • Next-generation Detail Clarity Processor delivers crisp and detailed image quality.
  • High 10,000:1*1 contrast ratio with Dynamic Iris.
  • System Daylight View 3 for enhanced color performance in bright rooms and mapping applications.
  • Waveform Monitor function for easy adjustment of black/white level.
  • DICOM Simulation mode for medical presentations and training*2.

2. High Reliability and Low TCO

  • Extended lamp replacement cycle of 3,000 hours*3.
  • Liquid cooling with highly efficient quad-lamp system reduces operational noise.
  • Stable operation in ambient temperatures of up to 45 ° C*4.
  • Quad-lamp system allows 24/7 operation in Lamp Relay mode.
  • Easy lamp replacement from rear side.
  • Eco filter requires no maintenance for 12,000 hours*5.
  • Durable, precision-tuned optical engine.
  • High efficiency lamps reduce power consumption.

3. Versatile Installation Flexibility

  • Flexible installation with 360 ° vertical cabinet rotation.
  • Multi-Screen Support System seamlessly joins screens with Edge blending, Color matching, and Digital image enlarging.
  • Multi-Unit Brightness Control.
  • Compatible with Panasonic Multi Monitoring & Control Software and Early Warning Software.
  • Single-cable DIGITAL LINK connection transmits video and control signals for up to 100 m (328 ft).
  • Portrait mode capability (PT-DZ21K2/DS20K2/DW17K2. Mounting the optional lamp units for portrait mode is required)*6.
  • Abundant terminals including 3G-SDI inputs (PT-DZ21K2/DS20K2 features inputs x 2 and PT-DZ16K2 has input x 1).

*1 Full on/off, with Dynamic Iris set to “3”, *2 This product is not a medical instrument. Do not use for actual medical diagnosis, *3 Usage environment affects lamp replacement cycle, *4 Operating temperature range is 0-40 °C (32-104 °F) when projector is used in Portrait mode or High Altitude mode for altitudes 1,400-2,700 m (4,593-8,858 ft).
Operating temperature range is 0-35 °C (32-95 °F) when projector used in Portrait mode in High Altitude mode, *5 Usage environment affects filter replacement cycle, *6 Installation is possible only with the terminal side facing downward. Horizontal rotation and vertical rotation are both limited to 15 °, Additionally, lamp life is reduced to 700 hours depending on usage environment.

Specifications table

Brightness17,000 lumens (four lamp)
Resolution1,366 x 768 pixels (Input signals that exceed this resolution converted to 1,366 x 768 pixels.)
Lamp432 W UHM lamps (x 4) (four lamp system)
Power Supply200 - 240 V AC, 12 A , 50/60 Hz ( 3-wire single-phase)
Power Consumption2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU ( without light o utput: 6,758 BTU )
DLP™ Chip | Panel Size21.6 mm (0.85 inches) diagonal (16:9 aspect ratio)
DLP™ Chip | Display MethodDLP™ chip x 3 ( R, G, B), DLP™ projection system
DLP™ Chip | Pixels1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels

Product series

PT-DZ21K2 series

PT-DZ21K2 series
 
Model
Lens test
Optional powered zoom/focus lenses
Optional powered zoom/focus lenses
Projector Type
432 W UHM lamps (x 4) (four lamp system)
432 W UHM lamps (x 4) (four lamp system)
DLP™ Chip | Panel Size
24.1 mm (0.95 inches) diagonal (16:9 aspect ratio)
21.6 mm (0.85 inches) diagonal (16:9 aspect ratio)
DLP™ Chip | Display Method
DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip x 3 ( R, G, B), DLP™ projection system
DLP™ chip | Number of Pixels
2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels
1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels
Brightness
16,000 lumens (four lamp)
17,000 lumens (four lamp)
20000 lumens (four lamp)
Resolution
1,920 x 1,080 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,080 pixels.)
1,366 x 768 pixels (Input signals that exceed this resolution converted to 1,366 x 768 pixels.)
1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Contrast Ratio
10,000:1 (full on/full off, in dynamic iris 3 mode)
10,000:1 (full on/full off, in dynamic iris 3 mode)
Screen Size
1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8 tele), (1.78-7.62 m(70 - 300 inches) with the ET-D75LE5, 16:9 aspect ratio
1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:9 aspect ratio
Optical Axis Shift | Vertical
±60% (±50% with the ET-D75LE6, +75-+88% with the ET-D75LE90) from center of screen, powered
±70% (±60% with the ET-D75LE6, +78-+96% with the ET-D75LE90) from center of screen, powered
Optical Axis Shift | Horizontal
±20% (±15% with the ET-D75LE6, -12-+14% with the ET-D75LE90) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
±30% (±20% with the ET-D75LE6, -13-+27% with the ET-D75LE90) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Lens
Optional powered zoom/focus lenses
Optional powered zoom/focus lenses
Installation
Ceiling/・or, front/rear
Ceiling/floor, front/rear
Terminals | SDI In
BNC x 1, 3G-SDI signal: SMPTE ST 424 compliant Dual-link HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
Terminals | HDMI In
HDMI 19-pin x 1, Deep Color, compatible with HDCP
HDMI 19-pin x 1, Deep Color, compatible with HDCP
Terminals | DVI-D In
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single l ink only
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals | RGB 1 In
BNC x 5
BNC x 5
Terminals | RGB 1 In | R, G, B
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 2 In
D-sub HD 15-pin (female) x 1
D-sub HD 15-pin (female) x 1
Terminals | RGB 2 In | R, G, B
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | Serial In
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | Serial Out
D-sub 9-pin (male) x 1 for link control
D-sub 9-pin (male) x 1 for link control
Terminals | Remote 1 In
M3 jack x 1 for wired remote control
M3 jack x 1 for wired remote control
Terminals | Remote 1 Out
M3 jack x 1 for link control
M3 jack x 1 for link control
Terminals | Remote 2 In
D-sub 9-pin (female) x 1 for external c ontrol (parallel)
D-sub 9-pin (female) x 1 for external control (parallel)
Terminals | DIGITAL LINK
RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible Deep Color, compatible with HDCP
RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible Deep Color, compatible with HDCP
Power Supply
200 - 240 V AC, 12 A, 50/60 Hz (3-wire single-phase)
200 - 240 V AC, 12 A , 50/60 Hz ( 3-wire single-phase)
Power Consumption
2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU (without light output: 6,758 BTU )
2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU ( without light o utput: 6,758 BTU )
Cabinet Materials
Molded plastic
Molded plastic
Operation Noise
46 dB (quad lamp operation)
46 dB (quad lamp operation)
Operating Temperature
0°- 45°C (32°- 113°F)
0°- 45°C (32°- 113°F)
Dimensions
620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)
620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)
Weight
Approx. 41 kg (90.4 lbs) (without lens)
Approx. 41 kg (90.4 lbs) (without lens)

Accessories & Software

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEF70

Fisheye lens for 3-Chip DLP projectors perfect for dome and planetarium projection

Showing 1 of 1

Brackets

ET-PKD520S

The Low ceiling mount bracket is designed for compatibility with PT-DZ21K2E, PT-DS20K2E, PT-DW17K2E, PT-DZ16K2, PT-RZ12K, PT-RQ13K projectors.

Showing 1 of 1

Related resources

Showing 12 of 36

Sorry there was an error...
The files you selected could not be downloaded as they do not exist.

You selected items.
Continue to select additional items or download selected items together as a zip file.

You selected 1 item.
Continue to select additional items or download the selected item directly.

Download selected file