Products

Filter
533 results

Peripherals

Positioner

Panasonic RJB, RJR and RJC-Series positioners are built to move in harmony with robots and are designed for maximum flexibility to meet the needs of your applications.

Peripherals

Welding torches

Welding torches

Placement (SMT)

Offline Camera Unit

Reduce offline data creation time and realization of machine downtime zero

TAWERS Arc welding system solution

TAWERS WG4 Arc welding system

TAWERS WG4 Arc welding system

Insertion (THT/PTH)

AV132

Supplied with a 40 or 80 component feeder with optional jumper wire, the compact supply unit configuration of the AV132 can fit both ammo pack and reel. The dual partition configuration enables a fast changeover. The next job can be set up while the current one is being processed.Capable of inserting components in four directions: 0°, 90°, 180°, and 270°, the AV132 optimizes productivity by simultaneously handling 26 and 52mm taped components and providing fast, full auto-recovery. The AV132 can reduce loading times by running two PCBs simultaneously, enabling efficient production due to a speed of 0.12s/component and a transfer speed of 2s/PCB.The fixed feeder unit and the out-of-component detection feature allow to replenish components while maintaining long-term non-stop runs.Preparation in advance or equipment operation during component change-over is possible.

Insertion (THT/PTH)

RL132

The RL132 combines functionality and speed with an insertion rate up to 25,700cph (.14s/component), a board processing sizes up to 650 x 381mm, a 33% reduction in PCB transfer time, up to 18% reduction in electrical and air consumption per insertion and an improved parts lifespan for a very low cost of ownership. This through-hole machine features a 4-pitch span and is configurable with 40 or 80 components inputs. Meanwhile, its dual split carriage enables machine function at exchange mode and parts replenishment during production. The RL132 was designed for a non-stop productivity. The Lead V cut method enables the RL132 to insert radial lead components at a speed of 0.14s/component. Either a 2-pitch (2.5mm/5.0mm), 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) option can be selected. The fixed feeder unit method and an out-of-component detection function allow ongoing component replenishment and long-term runs. PCB of 650mm x 381mm can be processed.

Placement (SMT)

NPM-DX

The NPM-DX provides a greater line throughput, better quality and lower production cost featuring an autonomous line control, which guaranties a stable operation based on automatic functionality. This functionality in combination with the machine set up offers a labor-saving production with improved utilization. In combination with the Panasonic software environment and embedded into an Industry 4.0 philosophy, the user can expect a modern shop floor management system including various remote operation options, feeder setup navigation, component supply navigation etc. In total, the NPM-DX reduces downtimes and increase the line throughput. With 92 400 cph and a feeder capacity for up to 136 reels, the NPM-DX is the ideal solution to meet the expectation of an evolving electronics assembly industry. The NPM-DX can process PCB sizes of up to 510 x 590 mm and place large connectors (up to 150 x 25mm) and other components (up to 120 x 90mm). This and other features make the NPM-DX the best solution for high volume-mix manufacturing.

Printing (SMT)

SPV-DC

The Stencil Printer SPV-DC enables high efficiency dual lane production in a compact design. The printer is designed for high speed production without changeovers. To reduce running costs the SPV-DC is equipped with the award-winning paperless cleaning function. Solder paste can refill automatically. Solder mask and the final printing result can be verified with an internal inspection. With the machine-to-machine-communication option the SPV-DC is using correction data to correct positional printing errors. The high-speed printer SPV-DC can print on board sizes from 50 x 50mm to 350 x 300mm. With the dual lanes the printer provides a cycle time of 13s, including transfer, positioning, recognition, high-precision printing and respective cleaning. Due to the non-stop changeover, the SPV-DC allows you to prepare the next production while running the printing process.

Software

Adaptive Process Control

Mounting feed-forward function Components can be placed correctly based on the solder printing position. Placement skip data feed-forward/Block recognition data feed-forward Placement machine recognition time reduction based on feed-forward discrepancy data. Misplacement of components using a modular placement machine can be prevented based on feed-forward solder/land* printing defect block data.*When inspecting lands on which package components are placed using flux epoxy. Printing position data feedback The solder printing position misalignment is measured by the inspection machine. The positioning correction is transferred by means of feedback to the screen printer. The solder printing area is measured by the inspection equipment. The stencil cleaning direction can be compared with the reference value by means of feedback.

Software

Manufacturing operations optimizer (MFO)

FeaturesThe Manufacturing Operations Optimiser (MFO) is a newly developed product for drawing up production plans required  for on-site  operations  to  reduce the man-hours needed for the production  plan  and,  at  the same time, to enhance production efficiency. MFO creates detailed schedules for productions and pre-set-up operations and calculates the required resources for production by simulating the manufacturing process  of  the  entire  SMT production floor.  By simulating the planned  production, the  MFO  answers questions about estimated  production  completion, indicates which  production  sequence is to  be  used for higher efficiency, proposes optimal machine set-up for higher efficiency, and indicates the number of staff needed to  achieve  the  plan.  MFO  models  the  required  production  line, taking  into  account errors that can occur at the production machines, such as parts exchange. It optimises production taking into  account multiple  production  lines.  The  off-line  set-up  sequence  can  be  optimised  to  adjust  the requirement  of  staff  and  material. MFO  support  is  not  limited  to  machines  of the NPM-series  but also  supports  CMand  DT-series  machines  and  screen  printers. It also supports non-Panasonic equipment such as SPI, AOI, reflow ovens, screen printers and others.

Panasonic manufacturing operations optimizer (MFO) is the line management system to create detailed production schedules including pre-set-up operations. Those production plans are mandatory to optimize manufacturing processes and thus improves cycle times and production efficiency. It also calculates the number of operators required by simulating the entire SMT manufacturing operation.  Image of the systemMFO provides clear and easy to understand plans for production, process set-up and operator management plus simulation reports.

Beside this, it provides various optimization function, like mounting process, production plan, production-set-up plan and operator count, including a table of function list and machines.  

Software

PanaCIM-EE Gen2: line management system

Featuressmart-factory-solutions software panacim-logo-02PanaCIM-EE Gen2 is the next generation of PanaCIM-EE, which allows for more efficient electronics manufacturing. This digital planning tool is necessary to enable reliable data management. This applies not only to individual systems, but to entire production lines, in which the data of each individual machine is included in the analysis. In addition, data from reports and management are included in the planning. This allows higher production rates and shorter cycle times to be achieved to make electronics production even more efficient and reliable. The PanaCIM-EE Gen2 is the next generation of a smart factory solution, connecting the shop floor with overall the management system. This includes precise inventory management, maximized factory performance based on a continuous production, total traceability, real time monitoring and optimization and an accurate in-time material supply. Material verificationMaterial controlTraceabilityProduction monitoring/dispatchProduction analysisMaintenanceEnterprise link

Software

iLNB: line management system

FeaturesThe revolutionary integrated  line  management  system  is  the basis for  controlling the  entire  production line. It  is  not limited  to  Panasonic machines but  also  integrates  third-party  equipment such as PCB transfer systems, laser markers, AOI, SPI and ovens. Conventional systems require a number of PCs to control different machine types from different suppliers. The iLNB controls the entire line with only one PC.  iLNB  significantly improves overall  productivity.  Production  data  and  production  changeover  of  all equipment, such as Panasonic’s placement machines as well as non-Panasonic machines including AOI, SPI, reflow  ovens  and  others,  can  be  controlled.  All  collected  data  are  transferred  to  a remote central computer. Small  errors such  as pick-up  errors  can  be recovered from  that  central  point.  Automatic production changeover is also possible. With the iLNB, users can manage automatic product changeovers and have an E-Link which provides an interface for information input and output, for machine control, management of components per feeder, and communication with a GEM/PLC. iLNB provides total control of the production line by interfacing between Panasonic and non-Panasonic machines, acting as one-stop channel. With the iLNB Users can manage automatic product changeovers and have an E-Link which provides an interface for information in- and output, for machine control, management of component per feeder and a communication to GEM/PLC. Automatic changeover Registration of automatic changeover recipeLine automatic changeoverAutomatic changeover monitoringLine operation monitoringE-Link interface for Information inputDownload / edit of scheduleE-Link interface for Information outputOperational information outputTrace information outputMachine status outputE-Link interface for machine controlMachine interlock; production start controlE-Link interface for feeder writeWriting of component data by an external systemCommunications to GEM/PLCSECS2/GEM communicationOPC communicationIO/RS-232C communication

You can select up to 3 products to compare: