1-čipové DLP™ projektory řady PT-REQ12

PT-REQ12

Představujeme novou generaci 1čipových 4K DLP™ projektorů

View full specifications Sdílet stránku

Klíčové prvky

Dramatická grafika pozvedne vaši produkci do nových výšin

Bezproblémový pracovní postup, lepší rozšiřitelnost

Nová konstrukce projektoru pro spolehlivý provoz

TYP PROJEKTORU	ŘADA PT-REQ12
MODELY	PT-REQ12	PT-REQ10	PT-REQ80	PT-REQ15 *
ROZLIŠENÍ	4K (3840 × 2400)³	4K (3840 × 2400)³	4K (3840 × 2400)³	4K (3840 × 2400)⁶
SVÍTIVOST	12 000 lm²	10 000 lm²	8 000 lm²	15 000 lm¹

Poznámka: Specifikace jsou orientační. Dodává se s objektivem ET-C1S600 v ceně.
* K dispozici v březnu 2024.

Popusťte uzdu síle dynamických vizuálních efektů!

Řada REQ12 patří mezi první 1-čipové DLP™ projektory, které jsou vybaveny Quad Pixel Drive, naší 2-axis pixelquadrupling technologií pro vytváření hlubokých, hladkých a detailních 4K obrazů. Podporuje projekci 240 Hz⁴ a pracuje s naším volitelným systémem sledování v reálném čase. Vylepšený dynamický kontrast obsahuje nové možnosti pro rozpoznávání scény, díky nimž rozdíl mezi černou, bílou a kontrastními barvami dramaticky vynikne a oživí váš obsah.

Přečtěte si více

Tabulka specifikací

Stáhnout

Tabulka specifikací

Projector type	1-Chip DLP™ projectors
DLP™ Chip \| Panel Size	0.8 in diagonal (16:10 aspect ratio)
DLP™ chip \| Number of Pixels	2,304,000 (1920 x 1200 pixels)
Light Source	Laser diode
Light Output1 2	12,000 lm / 12,400 lm (Center)*3
Screen Size (Diagonal)	70–700 inches (with supplied lens)
Resolution	4K (3840 x 2400 pixels) (Quad Pixel Drive: ON)
Contrast Ratio*1	25,000:1 (Full On/Full O, Dynamic Contrast [3])
Time until light output declines to 50 %*4	20,000 hours (NORMAL/QUIET), 24,000 hours (ECO)
Center-to-corner zone ratio*1	90 %
Lens	PT-REQ12/REQ10/REQ80: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus; PT-REQ12L/REQ10L/REQ80L: Optional powered zoom/focus lenses

View full specifications

Produktové řady

PT-REQ12 Series

Příslušenství a software

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

View product

Key Features
Long-distance DIGITAL LINK transmission of up to 150 m through a single LAN cable
Lower cabling costs and reduced wiring complexity
Self-contained with integrated splitter, switcher, scaler, and DIGITAL LINK conversion technology
Connect multiple ET-YFB200G switchers to accommodate extra display devices
Compact half-rack dimensions

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

View product

Key Features
Long-distance DIGITAL LINK transmission of up to 150 m through a single LAN cable
Lower cabling costs and reduced wiring complexity
Self-contained with integrated splitter, switcher, scaler, and DIGITAL LINK conversion technology
Connect multiple ET-YFB200G switchers to accommodate extra display devices
Compact half-rack dimensions

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

View product

Key Features
Simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Transmission up to 100m
Abundant input terminals, including two sets of HDMI and RGB inputs.
A separate audio output enables sound to be output when the display power is turned off.
ET-YFB100G input can be selected with the remote control of a Panasonic display with DIGITAL LINK compatibility.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

View product

Key Features
Simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Transmission up to 100m
Abundant input terminals, including two sets of HDMI and RGB inputs.
A separate audio output enables sound to be output when the display power is turned off.
ET-YFB100G input can be selected with the remote control of a Panasonic display with DIGITAL LINK compatibility.

Showing 1 of 1

Brackets

ET-PKD120H

High ceiling mount bracket

View product

Brackets

ET-PKD130H

View product

Showing 2 of 2

Metadata Handling

AJ-WM50P

The AJ-WM50 is the dual band, compact wireless module for P2HD and AG-DVX200 camera recorders. The WM50 dual band (2.4GHz and 5GHz) makes for a more reliable, stable connection to a network in various environments yet its compact size enables it to fit in the wireless module compartment of the P2HD cameras. 2.4GHz offers strong connection through obstacles and compatible with many devices whereas 5GHz offers stability from radio wave interference (Microwave, Bluetooth, etc).

View product

Key Features
Compact size, fits inside camera body same as WM30.
Dual Band 2.4GHz and 5GHz (IEEE802.11 a/b/g/n/ac compliant)
High security WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/AES), WEP (64 bit/128 bit)

Showing 1 of 1

Metadata Handling

AJ-WM50P

View product

Key Features
Compact size, fits inside camera body same as WM30.
Dual Band 2.4GHz and 5GHz (IEEE802.11 a/b/g/n/ac compliant)
High security WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/AES), WEP (64 bit/128 bit)

Showing 1 of 1

Early Warning System

ET-SWA100

Monitors projectors and displays through intranet and detects or predicts abnormality or symptoms of trouble. Minimizes downtime and saves time and costs.

View product

Key Features
Up to 2048 devices can be monitored remotely from PC or tablet web browser.
Advance notice of required maintenance
Trouble prediction detection
Quick response when problems occur
Record the operating conditions of each device and, based on the operating hours, it can predict when consumable parts will be required, regular periodic cleaning will be necessary, and non-consumable parts will need to be replaced.

Showing 1 of 1

Early Warning System

ET-SWA100

Monitors projectors and displays through intranet and detects or predicts abnormality or symptoms of trouble. Minimizes downtime and saves time and costs.

View product

Key Features
Up to 2048 devices can be monitored remotely from PC or tablet web browser.
Advance notice of required maintenance
Trouble prediction detection
Quick response when problems occur
Record the operating conditions of each device and, based on the operating hours, it can predict when consumable parts will be required, regular periodic cleaning will be necessary, and non-consumable parts will need to be replaced.

Showing 1 of 1

Frames

ET-RFD40

The rental frames are sturdy, strong and visually appealing. In addition, they offer a horizontal and vertical adjustment feature for the ideal projector position.

View product

Key Features
Convertible Design
Improved adjustment possibilities
Full stacking compability to earlier frame models
Built-in galvanic inslation
DGUV V17 verified

Showing 1 of 1

Související zdroje

Brochures

Business Scene Photos

Image Data

Spec Sheets

Download specifications

Projector type	1-Chip DLP™ projectors
DLP™ Chip \| Panel Size	0.8 in diagonal (16:10 aspect ratio)
DLP™ chip \| Number of Pixels	2,304,000 (1920 x 1200 pixels)
Light Source	Laser diode
Light Output1 2	12,000 lm / 12,400 lm (Center)*3
Screen Size (Diagonal)	70–700 inches (with supplied lens)
Resolution	4K (3840 x 2400 pixels) (Quad Pixel Drive: ON)
Contrast Ratio*1	25,000:1 (Full On/Full O, Dynamic Contrast [3])
Time until light output declines to 50 %*4	20,000 hours (NORMAL/QUIET), 24,000 hours (ECO)
Center-to-corner zone ratio*1	90 %
Lens	PT-REQ12/REQ10/REQ80: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus; PT-REQ12L/REQ10L/REQ80L: Optional powered zoom/focus lenses
Lens shift \| Vertical(From the origin point of the lens mounter)	±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100)
Lens shift \| Horizontal(From the origin point of the lens mounter)	±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100)
Keystone Correction Range	Vertical: ±40 ° (±5 ° with ET-C1U100; ±10 ° with ET-C1W300; ±16 ° with ET-C1W400; ±22 ° with ET-C1W500),Horizontal: ±40 ° (±3 ° with ET-C1U100; ±5 ° with ET-C1W300; ±10 ° with ET-C1W400; ±15 ° with ET-C1W500)
Terminals \| HDMI™ 1/2 IN	HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)
Terminals \| DisplayPort™	DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)
Terminals \| Multi Sync In	BNC x 1
Terminals \| Multi Sync Out	BNC x 1
Terminals \| Serial In	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| Serial In/Out	D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals \| REMOTE 1 IN	M3 stereo mini-jack x 1 for wired remote control
Terminals \| REMOTE 1 OUT	M3 stereo mini-jack x 1 for link control (for wired remote control)
Terminals \| Remote 2 In	D-sub 9-pin (female) x 1 for external control (parallel)
Terminals \| LAN	RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals \| USB	USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory
Terminals \| DC Out	USB Type A x 1 (for power supply, DC 5 V, 2 A)
Terminals \| Expansion Slot	Open slot for for function boards, Intel® SDM compatible
Protocol versions	IPv4, IPv6*5
Power Supply	AC 100–240 V, 50/60 Hz
Power consumption*6 \| Maximum power consumption	1,030 W (10.4–4.3 A) (1,040 VA) (Power consumption is 990 W at AC 200–240 V)
Power Consumption*6 \| On-mode power consumption (Operating mode) Nomal	880 W (AC 100–120 V), 840 W (AC 200–240 V)
Power Consumption*6 \| On-mode power consumption (Operating mode) ECO	680 W (AC 100–120 V), 655 W (AC 200–240 V)
Power Consumption*6 \| On-mode power consumption (Operating mode) QUIET	670 W (AC 100–120 V), 645 W (AC 200–240 V)
Operation noise*1	38 dB (NORMAL/ECO), 35 dB (QUIET)
Dimensions (W x H x D)	PT-REQ12/REQ10/REQ80: 648 x 212 x 538 mm (25 1/2˝ x 8 11/32˝ x 21 3/16˝) (With feet at shortest position) PT-REQ12L/REQ10L/REQ80L: 498 x 212 x 538 mm (19 5/8˝ x 8 11/32˝ x 21 3/16˝ ) (With feet at shortest position)
Weight*7	PT-REQ12/REQ10/REQ80: Approx. 28.7 kg (63.28 lbs) (with supplied lens), PT-REQ12L/REQ10L/REQ80L: Approx. 27.0 kg (59.53 lbs) (without lens)
Operating Environment	Operating temperature: 0–45 °C (32–113 °F)*8, operating humidity: 10–80 % (no condensation)
Applicable Software	Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™
Control function via LAN	Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2)
Note	1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped. 2 When [OPERATING MODE] is set to [NORMAL]. 3 Average light output value of all shipped products measured at center of screen in [NORMAL] Mode. 4 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Dynamic Contrast [3], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Estimated time until light output declines to 50 % varies depending on the environment. 5 Optional AJ-WM50 Series Wireless Module is not compatible with IPv6. 6 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft). 7 Average value. May differ depending on the actual unit. 8 When the optional AJ-WM50 Series wireless module is attached, the operating temperature range becomes 0–40 °C (32–104 °F). The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft).

	PT-REQ12 Series
Model	PT-REQ12	PT-REQ10	PT-REQ80	PT-REQ15
Projector Type	1-Chip DLP™ projectors	1-Chip DLP™ projectors	1-Chip DLP™ projectors	1-Chip DLP™ projectors
DLP™ Chip \| Panel Size	0.8 in diagonal (16:10 aspect ratio)	0.8 in diagonal (16:10 aspect ratio)	0.8 in diagonal (16:10 aspect ratio)	0.8 in diagonal (16:10 aspect ratio)
DLP™ Chip \| Display Method				0.8 in diagonal (16:10 aspect ratio)
DLP™ Chip \| Number of Pixels	2,304,000 (1920 x 1200 pixels)	2,304,000 (1920 x 1200 pixels)	2,304,000 (1920 x 1200 pixels)	2,304,000 (1920 x 1200 pixels)
Brightness	12,000 lm / 12,400 lm (Center)*3	10,000 lm / 10,300 lm (Center)*3	8,000 lm / 8,200 lm (Center)*3	15,000lm
Light Source	Laser diode	Laser diode	Laser diode	Laser Diode
Time until light output declines to 50 %	20,000 hours (NORMAL/QUIET), 24,000 hours (ECO)	20,000 hours (NORMAL/QUIET), 24,000 hours (ECO)	20,000 hours (NORMAL/QUIET), 24,000 hours (ECO)	20,000 hours (NORMAL/QUIET), 24,000 hours (ECO)
Resolution	4K (3840 x 2400 pixels) (Quad Pixel Drive: ON)	4K (3840 x 2400 pixels) (Quad Pixel Drive: ON)	4K (3840 x 2400 pixels) (Quad Pixel Drive: ON)	4K (3840 x 2400 pixels) (Quad Pixel Drive: ON)
Contrast Ratio	25,000:1 (Full On/Full O, Dynamic Contrast [3])	25,000:1 (Full On/Full O, Dynamic Contrast [3])	25,000:1 (Full On/Full O, Dynamic Contrast [3])	25,000:1 (Full On/Full O, Dynamic Contrast [3])
Screen Size	70–700 inches (with supplied lens)	70–700 inches (with supplied lens)	70–700 inches (with supplied lens)	70–700 inches (with supplied lens)
Center-to-corner zone ratio	90 %	90 %	90 %	90%
Lens	PT-REQ12/REQ10/REQ80: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus; PT-REQ12L/REQ10L/REQ80L: Optional powered zoom/focus lenses	PT-REQ12/REQ10/REQ80: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus; PT-REQ12L/REQ10L/REQ80L: Optional powered zoom/focus lenses	PT-REQ12/REQ10/REQ80: Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus; PT-REQ12L/REQ10L/REQ80L: Optional powered zoom/focus lenses	Powered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus (optional lenses also available)
Lens shift \| Horizontal(From the origin point of the lens mounter)	±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100)	±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100)	±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100)	±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100)
Lens shift \| Vertical(From the origin point of the lens mounter)	±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100)	±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100)	±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100)	±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100)
Installation				Ceiling/floor, front/rear, free 360-degree installation
Terminals \| HDMI 1/2 IN	HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)	HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)	HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)	HDMI™ x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)
Terminals \| DisplayPort	DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)	DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)	DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)	DisplayPort™ x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)
Terminals \| Multi Sync In	BNC x 1	BNC x 1	BNC x 1	BNC x 1
Terminals \| Multi Sync Out	BNC x 1	BNC x 1	BNC x 1	BNC x 1
Terminals \| Serial In	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| Serial Out		D-sub 9-pin (male) x 1 for link control (RS-232C compliant)	D-sub 9-pin (male) x 1 for link control (RS-232C compliant)	D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals \| Remote 1 In	M3 stereo mini-jack x 1 for wired remote control	M3 stereo mini-jack x 1 for wired remote control	M3 stereo mini-jack x 1 for wired remote control	M3 stereo mini-jack x 1 for wired remote control
Terminals \| Remote 1 Out	M3 stereo mini-jack x 1 for link control (for wired remote control)	M3 stereo mini-jack x 1 for link control (for wired remote control)	M3 stereo mini-jack x 1 for link control (for wired remote control)	M3 stereo mini-jack x 1 for link control (for wired remote control)
Terminals \| Remote 2 In	D-sub 9-pin (female) x 1 for external control (parallel)	D-sub 9-pin (female) x 1 for external control (parallel)	D-sub 9-pin (female) x 1 for external control (parallel)	D-sub 9-pin (female) x 1 for external control (parallel)
Terminals \| LAN	RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible	RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible	RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible	RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals \| USB	USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory	USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory	USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory	USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory
Terminals \| DC Out	USB Type A x 1 (for power supply, DC 5 V, 2 A)	USB Type A x 1 (for power supply, DC 5 V, 2 A)	USB Type A x 1 (for power supply, DC 5 V, 2 A)	USB Type A x 1 (for power supply, DC 5 V, 2 A)
Terminals \| Expansion Slot	Open slot for for function boards, Intel® SDM compatible	Open slot for for function boards, Intel® SDM compatible	Open slot for for function boards, Intel® SDM compatible	Open slot for for function boards, Intel® SDM compatible
Protocol versions	IPv4, IPv6*5	IPv4, IPv6*5	IPv4, IPv6*5	IPv4, IPv6*5
Power Supply	AC 100–240 V, 50/60 Hz	AC 100–240 V, 50/60 Hz	AC 100–240 V, 50/60 Hz	AC 100–240 V, 50/60 Hz
Power consumption \| Maximum power consumption	1,030 W (10.4–4.3 A) (1,040 VA) (Power consumption is 990 W at AC 200–240 V)	<div>870 W (8.8–3.7 A) (880 VA)</div><div>(Power consumption is 840 W at AC 200–240 V)</div>	760 W (7.7–3.2 A) (770 VA) (Power consumption is 730 W at AC 200–240 V)	TBD
Protocol versions	IPv4, IPv6*5	IPv4, IPv6*5	IPv4, IPv6*5	IPv4, IPv6*5
Operation Noise	38 dB (NORMAL/ECO), 35 dB (QUIET)	36 dB (NORMAL/ECO), 33 dB (QUIET)	35 dB (NORMAL/ECO), 32 dB (QUIET)	TBD
Operating Environment	Operating temperature: 0–45 °C (32–113 °F)*8, operating humidity: 10–80 % (no condensation)	Operating temperature: 0–45 °C (32–113 °F)*8, operating humidity: 10–80 % (no condensation)	Operating temperature: 0–45 °C (32–113 °F)*8, operating humidity: 10–80 % (no condensation)	Operating temperature: 0–45 °C (32–113 °F)*8, operating humidity: 10–80 % (no condensation)
Dimensions	<div>PT-REQ12/REQ10/REQ80: 648 x 212 x 538 mm (25 1/2˝ x 8 11/32˝ x 21 3/16˝) (With feet at shortest position)</div><div>PT-REQ12L/REQ10L/REQ80L: 498 x 212 x 538 mm (19 5/8˝ x 8 11/32˝ x 21 3/16˝ ) (With feet at shortest position)</div>	PT-REQ12/REQ10/REQ80: 648 x 212 x 538 mm (25 1/2˝ x 8 11/32˝ x 21 3/16˝) (With feet at shortest position) PT-REQ12L/REQ10L/REQ80L: 498 x 212 x 538 mm (19 5/8˝ x 8 11/32˝ x 21 3/16˝ ) (With feet at shortest position)	PT-REQ12/REQ10/REQ80: 648 x 212 x 538 mm (25 1/2˝ x 8 11/32˝ x 21 3/16˝) (With feet at shortest position)PT-REQ12L/REQ10L/REQ80L: 498 x 212 x 538 mm (19 5/8˝ x 8 11/32˝ x 21 3/16˝ ) (With feet at shortest position)	498 x 212 x 538 mm (19 19/32˝ x 8 11/32˝ x 21 3/16˝) (Without lens with feet at shortest position)
Weight	PT-REQ12/REQ10/REQ80: Approx. 28.7 kg (63.28 lbs) (with supplied lens), PT-REQ12L/REQ10L/REQ80L: Approx. 27.0 kg (59.53 lbs) (without lens)	PT-REQ12/REQ10/REQ80: Approx. 28.7 kg (63.28 lbs) (with supplied lens), PT-REQ12L/REQ10L/REQ80L: Approx. 27.0 kg (59.53 lbs) (without lens)	PT-REQ12/REQ10/REQ80: Approx. 28.7 kg (63.28 lbs) (with supplied lens), PT-REQ12L/REQ10L/REQ80L: Approx. 27.0 kg (59.53 lbs) (without lens)	TBD
Control function via LAN	Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2)	Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2)	Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2)	Crestron Connected™ V2, Crestron XiO Cloud™, Art-Net DMX, AMX® DD, and PJLink™ (Class 2)
Applicable software/application	<div>Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System,</div><div>Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™</div>	Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System,Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™	Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System,Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™	Multi Monitoring & Control Software, Projector Network Setup Software, Real-Time Tracking Projection-Mapping System,Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™