Gamme d'accessoires Toughbook
Carrying Solutions
Carrying Solutions
CF-VST331U
The Carry Strap (CF-VST331U) is designed for compatibility with TOUGHBOOK 33.
| Key Features |
|---|
| Cushioned hand grip |
| Adjustable length |
| Fits most configurations of the TOUGHBOOK 33 |
Carrying Solutions
CF-VST332U
The Rotating Strap (CF-VST332U) is designed for compatibility with TOUGHBOOK 33.
| Key Features |
|---|
| Cushioned hand grip |
| Adjustable length |
| Fits most configurations of the TOUGHBOOK 33 |
Carrying Solutions
FZ-VSTL11U
The Rotating Hand Strap (FZ-VSTL11U) is designed for TOUGHBOOK S1.
| Key Features |
|---|
| Holds the TOUGHBOOK S1 comfortably in the hand |
| Rotating ability allows for quick change from portrait to landscape mode applications |
| Has quick-release snaps to allow fast access to the battery for changes |
| Can remain on the TOUGHBOOK S1 when cradled |
| Not compatible with barcode reader |
Carrying Solutions
PCPE-CCI7652
The Legacy Double Laptop Case (PCPE-CCI7652) is designed to be compatible with most 16" Notebooks.
| Key Features |
|---|
| Fits most 16" Notebooks |
| Checkpoint Friendly Compartment |
| File Compartment |
| Front Accessory Pocket |
| Soft-Grip Handles |
Carrying Solutions
PCPE-DCTBAG7
The Top Traveller Pro Case (PCPE-DCTBAG7) is designed as a carrying solution for TOUGHBOOK devices with screen sizes ranging from 14 to 15.6 inches.
| Key Features |
|---|
| Pour tailles d’écran 14-15,6” |
| Compartiment pour ordinateur portable rembourré et verrouillable (mousse à mémoire de forme et protection de boîtier EVA) |
| Compartiment pour ordinateur portable avec système universel et technologie antidérapante |
| Poche avant avec porte-clés, poste de travail (porte-stylos, pochettes pour téléphone portable et cartes de visite) et espace de rangement supplémentaire pour accessoires mobiles |
| Sangle de transport réglable avec rembourrage confortable au niveau de l’épaule et technologie antidérapante |
Carrying Solutions
PCPE-INF20B1
Infos produit Images et vidéos Produits associés Assistance & TéléchargementsL’ensemble d’accessoires de mobilité Toughmate 20 est conçu pour une mobilité renforcée et une utilisation mains libres avec votre TOUGHBOOK 20. L’ensemble d’accessoires de mobilité est livré avec une poignée amovible et une bandoulière ergonomique. Vous pouvez porter votre terminal en mode TOUGHBOOK complet ou en mode tablette. Il garantit également un accès facile à l’ensemble des fonctionnalités, ports et caméras. Convient au TOUGHBOOK 20 et TOUGHBOOK A2.
| Key Features |
|---|
| Poignée amovible et bandoulière ergonomique |
| Accès facile à l’ensemble des fonctionnalités et ports |
Carrying Solutions
PCPE-INF20H1
Infos produit Images et vidéos Produits associés Assistance & TéléchargementsLa poignée rotative renforcée Toughmate 20 est conçue pour une utilisation plus facile et plus pratique du TOUGHBOOK 20. La poignée rotative peut pivoter à 360 degrés sur la partie tablette du TOUGHBOOK 20. Elle s’attache à l’aide des encoches de fixation intégrées sur les quatre faces. L’utilisateur peut porter le terminal de façon confortable, tout en accédant facilement à l’ensemble des fonctionnalités, ports et caméras. La poignée rotative renforcée Toughmate 20 est livrée avec une poignée amovible et une longue bandoulière de 1,4 m. La poignée rotative renforcée Toughmate 20 est également compatible avec le TOUGHBOOK A2.
| Key Features |
|---|
| Se fixe à la partie tablette du TOUGHBOOK 20 |
| Permet une rotation complète à 360 degrés |
| Inclut une poignée amovible et une longue bandoulière de 1,4 m |
Carrying Solutions
PCPE-INF33A1
The InfoCase Always On Case (PCPE-INF33A1) is designed for compatibility with TOUGHBOOK 33 Tablet only.
| Key Features |
|---|
| A ballistic nylon case including built in hand strap |
| D-ring attachments for use with PCPE-INFUVA1 User Harness or shoulder straps |
| Includes standard shoulder strap – attachment via D-rings |
Carrying Solutions
PCPE-INF33B1
L’ensemble d’accessoires de mobilité Toughmate 33 est conçu pour une mobilité renforcée et une utilisation mains libres avec votre TOUGHBOOK 33. L’ensemble d’accessoires de mobilité est livré avec une poignée amovible et une bandoulière ergonomique pour faciliter l’utilisation mains libres. La poignée et la bandoulière peuvent être utilisées séparément ou ensemble, mais doivent seulement être utilisées avec la partie tablette TB33 et non avec le clavier combiné. Il garantit également un accès facile à l’ensemble des fonctionnalités, ports et caméras. Notre ensemble d’accessoires de mobilité Toughmate 33 est entièrement compatible avec les stations d’accueil et les socles des marques Gamber-Johnson et Havis pour Toughbook 33.
| Key Features |
|---|
| Poignée de transport amovible et bandoulière ergonomique |
| Accès facile à l’ensemble des fonctionnalités, ports et caméras |
| Compatible avec les socles de bureau et certaines stations d’accueil pour véhicules CF-33 |
Carrying Solutions
PCPE-INF33H1
The InfoCase Rotating Handstrap (PCPE-INF33H1) is designed for compatibility with TOUGHBOOK 33.
| Key Features |
|---|
| Ergonomic rotating hand strap for the TOUGHBOOK 33 |
| Attaches via retention points on the tablet portion of the device |
| D-rings fitted for attachment of shoulder strap (supplied) |
Carrying Solutions
PCPE-INFA2AO
Cette sacoche garantit une protection permanente et une facilité d'utilisation grâce à son enveloppe en nylon et ses matériaux absorbant les chocs. La protection d'écran rabattable offre une garantie supplémentaire pour l'écran A2 et se plie en formant un socle pour surélever l’écran selon plusieurs angles pour faciliter le visionnage et la saisie. Le cache protège également l'écran lorsqu'il n'est pas utilisé. La sacoche inclut une bandoulière ergonomique et la poignée réglable améliorera votre productivité en assurant une prise en main confortable de votre TOUGHBOOK pendant de longues périodes. Convient pour le TOUGHBOOK A2 et est également compatible avec la tablette détachée du TOUGHBOOK 20.
| Key Features |
|---|
| Sacoche pour tablette en nylon renforcé avec poignée intégrée et anneaux de fixation en D |
| Le rabat de l’écran se replie vers l’arrière pour former un socle |
| Bandoulière standard incluse |
| Compatible avec les modèles de harnais et de bandoulière suivants : PCPE-INFUVA1, PCPE-SYSSSB1, PCPE-SYS4PH1 et PCPE-INFGNDS |
Carrying Solutions
PCPE-INFCOM3
Les sacoches à chargement par le haut Toughmate sont conçues spécialement pour les professionnels itinérants. Sa légèreté, ses nombreuses poches et sa bandoulière ou ses poignées de transport font de la sacoche à chargement par le haut Toughmate le compagnon idéal pour les terminaux professionnels renforcés TOUGHBOOK.
| Key Features |
|---|
| Rangement pratique pour Toughbook, dossiers et accessoires |
| Convient pour la gamme complète TOUGHBOOK |
| Pochette intérieure convient aux modèles TOUGHBOOK plus petits |
| Livré avec bandoulière |
| Matière : Enveloppe en nylon, rembourrage en mousse |
Carrying Solutions
PCPE-INFF1H1
The InfoCase Toughmate Holster (PCPE-INFF1H1) is compatible for the TOUGHBOOK N1 and T1 tablets.
| Key Features |
|---|
| Includes a belt or shoulder strap for hands-free mobile use |
| Contains Silicon-backed retention strap to hold device securely |
| Belt loops with Velcro secures the holster to the included belt, or the D-rings accommodate the mini shoulder strap. |
| This holster allows even more versatility by including a stylus loop so you're always ready. |
| The holster will accommodate the TOUGHBOOK T1 and N1, with extended battery, and all Toughmate and factory hand straps |
Carrying Solutions
PCPE-INFF1H2
The Infocase Slim Holster (PCPE-INFF1H2) provides a sleek and protective carrying solution for the TOUGHBOOK N1.
| Key Features |
|---|
| Inclut une ceinture ou une bandoulière pour une utilisation mobile mains libres |
| Possède une sangle de fixation renforcée en silicone pour porter le terminal en toute sécurité. |
| Les passants de la ceinture peuvent être utilisés pour attacher l’étui à une ceinture d’une largeur maximale de 41 mm (non fournie) |
Carrying Solutions
PCPE-INFF1S1/3
The InfoCase Hand Strap (PCPE-INFF1S1/3) provides a secure and comfortable way to carry and hold the TOUGHBOOK N1.
| Key Features |
|---|
| Sangle élastique réglable pour une prise en main sécurisée du terminal |
| La poignée se fixe au point d’attache supérieur sur le terminal N1 pour les utilisateurs gauchers ou droitiers |
| Convient pour le TOUGHBOOK N1 et peut rester fixée au terminal tout en utilisant l’étui Toughmate N1 |
| Disponible en deux tailles : Small/Medium ou Large/Extra Large |
Carrying Solutions
PCPE-INFG1A1
The Infocase Always On Case (PCPE-INFG1A1) provides continuous protection for the TOUGHBOOK G1.
| Key Features |
|---|
| Nylon shell and shock absorbing case materials |
| The fold away flap screen cover provides an additional safeguard for the G1 screen |
| Doubles as an easel stand to elevate the screen to multiple angles for viewing or typing |
| Case includes an ergonomic shoulder strap and adjustable hand strap |
| Allows easy access to all features, ports, and cameras |
Carrying Solutions
PCPE-INFG1DS
The InfoCase Durastrap Mobility Bundle (PCPE-INFG1DS) is compatible for the TOUGHBOOK G1 tablet.
| Key Features |
|---|
| Cleanable accessory that includes an adjustable arm strap and shoulder strap |
| Extremely resistant to tears, cuts and abrasion, it is perfect for healthcare, food service, or other bio-sensitive environments where cleanliness is essential |
| The strap is waterproof and highly resistant to chemicals. |
| Fits the G1 configuration with large corner guards only. |
| Compatible with FZ-G1 Standard Docking Station |
Carrying Solutions
PCPE-INFG1X1
The InfoCase X-Strap (PCPE-INFG1X1) is a carrying solution compatible for the TOUGHBOOK G1 tablet.
| Key Features |
|---|
| Designed to make using your G1 tablet easier and more convenient. |
| The X-Strap comes with a 56-inch adjustable shoulder strap. |
| Allows complete hands-free use |
| The X-Strap is constructed using durable materials, including a nylon shell, EVA foam, and a rigid poly core. |
Carrying Solutions
PCPE-INFGNDS
DuraStrap is a product that combines all of the functionality of Toughmate shoulder straps with a waterproof, sanitizable surface, making it an ideal solution for healthcare, food service, or other bio-sensitive environments. It has excellent performance in heat and cold, is extremely resistant to cuts, tears, and abrasion. DuraStrap is impermeable to liquids. and can be disinfected with common household or commercial cleansing agents.
| Key Features |
|---|
| Waterproof, sanitisable shoulder strap - ideal for healthcare, food service, or other bio-sensitive environments. |
| Excellent performance in heat and cold, is extremely resistant to cuts, tears, and abrasion. |
| DuraStrap is impermeable to liquids. and can be disinfected with common household or commercial cleansing agents |
Carrying Solutions
PCPE-INFM1AO
The Infocase Always On Case (PCPE-INFM1AO) provides continuous protection for the TOUGHBOOK M1.
| Key Features |
|---|
| Nylon shell and shock absorbing case materials |
| The fold away flap screen cover provides an additional safeguard for the M1 screen |
| Doubles as an easel stand to elevate the screen to multiple angles for viewing or typing |
| Case includes an ergonomic shoulder strap and adjustable hand strap |
| Allows easy access to all features, ports, and cameras |
Carrying Solutions
PCPE-INFM1BH
The InfoCase Holster (PCPE-INFM1BH) is designed to carry or hold TOUGHBOOK M1, B2, and L1 models.
| Key Features |
|---|
| Includes belt and shoulder strap |
| Nylon shell and foam construction for excellent screen protection |
| Accommodates the M1 and B2 with OEM hand strap |
Carrying Solutions
PCPE-INFM1SS
The Infocase Shoulder Strap (PCPE-INFM1SS) provides a comfortable and convenient way to carry the TOUGHBOOK M1.
| Key Features |
|---|
| Basic surround for TOUGHBOOK M1 with lightweight shoulder strap |
| Includes all the features of an Always On case except screen protector and easel functionality |
| User harness ready |
Carrying Solutions
PCPE-INFSS02
The Infocase Deluxe Shoulder Strap (PCPE-INFSS02) provides a comfortable and convenient way to carry TOUGHBOOK 33.
| Key Features |
|---|
| Shoulder strap with padded section for additional comfort |
| Material: Nylon, steel, rubber |
Carrying Solutions
PCPE-INFTSTP
The Infocase T-Strap (PCPE-INFTSTP) provides a secure and hands-free carrying solution for the TOUGHBOOK N1.
| Key Features |
|---|
| Adjustable elastic strap to keep the device secure in-hand while on the job. |
| Symmetrical orientation design works great for both left and right handed users |
Carrying Solutions
PCPE-INFUVA1
The Infocase User Harness (PCPE-INFUVA1) is a carrying solution to provide hands-free convenience for TOUGHBOOK devices.
| Key Features |
|---|
| Adjustable four point harness with padded back panel |
| Quickly transition from carrying your TOUGHBOOK to using it hands-free |
| Works with any user harness ready case |
Carrying Solutions
PCPE-SYS1573
The InfoCase Synthetic Case with Click Fix Stud (PCPE-SYS1573) is designed for compatibility with TOUGHBOOK N1.
| Key Features |
|---|
| Synthetic Case with Click Fix stud |
| Accommodates N1 with standard or extended battery and click-fix stud |
| Can be paired with PCPE-SYS2128 or PCPE-SYS2145. |
Carrying Solutions
PCPE-SYSLG11/14
The Standard Case (PCPE-SYSLG11/14) is designed for compatibility with the TOUGHBOOK G1.
| Key Features |
|---|
| Synthetic case with screen flap |
| D-rings to allow attachment to harnesses and shoulder straps |
| Works with high/low corner guards and extended battery |
| Fits in TOUGHBOOK G1 Gamber-Johnson Vehicle Dock |
Carrying Solutions
PCPE-SYSSSB1
The Breakable Velcro shoulder strap (PCPE-SYSSSB1) is design to be compatible for any case or device with D-rings.
| Key Features |
|---|
| Breakable Velcro shoulder strap (2 Part Strap) with no adjustment slider |
Carrying Solutions
PCPE-WENSYN1
The PCPE-WENSYN1 (Synergy Rucksack), is a backpack-style bag designed for transporting TOUGHBOOK laptops.
| Key Features |
|---|
| Fits most 15”/15.4” notebooks |
| Shock absorbing shoulder straps |
| Air flow back padding |
| Adjustable chest strap |
| Complies with most airline restrictions for hand luggage. |
Carrying Solutions
CF-VNS331U
Shoulder Belt (CF-VNS331U) is designed to be compatible for TOUGHBOOK 33 & S1 models.
| Key Features |
|---|
| Shoulder Belt |
Carrying Solutions
FZ-VNSM12U
The Shoulder Case with Straps (FZ-VNSM12U) is designed for compatibility with TOUGHBOOK M1.
| Key Features |
|---|
| Shoulder case with straps |
| Designed to withstand challenging conditions |
| Allows for quick and easy access to ports, controls, and cameras. |
Carrying Solutions
FZ-VSTN11U
The Hand Strap (FZ-VSTN11U) is designed for compatibility with TOUGHBOOK N1.
| Key Features |
|---|
| Hand Strap |
Carrying Solutions
FZ-VSTN12U
The Holster and Belt (FZ-VSTN12U) is designed for compatibility with TOUGHBOOK N1.
| Key Features |
|---|
| Holster and Belt |
Carrying Solutions
FZ-VSTA31U
The Rotating Hand Strap with stand (FZ-VSTA31U) is designed as a carrying solution for the TOUGHBOOK A3.
| Key Features |
|---|
| The rotating hand strap provides an ergonomic and secure grip. |
| It has an integrated stand included. |
Carrying Solutions
PCPE-INF55AO
The Infocase Always-On Case (PCPE-INF55AO) provides a protective and convenient carrying solution for the TOUGHBOOK 55.
| Key Features |
|---|
| Carry case specifically for the TOUGHBOOK 55 |
| Shoulder strap included |
| D-rings for use with user harness |
| X-strap on rear |
| Accommodates standard and performance models |
Carrying Solutions
FZ-VSTS11U
The Rotating Hand Strap (FZ-VSTS11U) is designed for compatibility with TOUGHBOOK S1.
| Key Features |
|---|
| Rotating Hand Strap - FZ-VSTS11U |
| Cushioned hand grip |
| Includes built-in Stylus Pen Holder |
| Fits all configurations of the TOUGHBOOK S1 |
Carrying Solutions
FZ-VNSS11U
The Shoulder Case (FZ-VNSS11U) is designed for compatibility with TOUGHBOOK S1.
| Key Features |
|---|
| Shoulder Case - FZ-VNSS11U |
| Designed to protect from scratches, bumps, and other potential damage during transport. |
| Easy access to the tablet's ports, buttons, and features without needing to remove it from the case. |
| Compatible with TOUGHBOOK S1; not compatible with gadgets and extended battery. |
Carrying Solutions
FZ-VSTG21U
The Rotatable Hand Strap (FZ-VSTG21U) is designed for compatibility with TOUGHBOOK G2.
| Key Features |
|---|
| Hold the TOUGHBOOK G2 with this comfortable rotating hand strap with just one hand freeing up your other hand to do your job |
| Cushioned hand grip |
| Adjustable length |
| Includes built-in Stylus Pen Holder and Kickstand |
Carrying Solutions
FZ-VNS401U
The Shoulder Strap (FZ-VNS401U) is designed for compatibility with the TOUGHBOOK 40.
| Key Features |
|---|
| Shoulder Strap, includes 2 D-Rings |
| Compatible with TOUGHBOOK 40 |
Carrying Solutions
PCPE-INFG2MB
The Infocase Mobility Bundle (PCPE-INFG2MB) provides carrying solutions for the TOUGHBOOK G2 Tablet.
| Key Features |
|---|
| Mobility Bundle for TOUGHBOOK G2 |
| Featuring carry handle and a shoulder strap |
Carrying Solutions
PCPE-INFG2H1
The InfoCase Toughmate Rotating Hand Strap (PCPE-INFG2H1 ) is compatible for all TOUGHBOOK G2 models.
| Key Features |
|---|
| Toughmate Rotating Hand Strap |
| Includes a shoulder strap |
| Size: 250 x 203 x 20 mm |
| Weight: 0.2 kg |
| Part no: PCPE-INFG2H1 |
Carrying Solutions
PCPE-INFG2AO
The Infocase Always On Case (PCPE-INFG2AO) provides a carrying solution for the TOUGHBOOK G2 Tablet.
| Key Features |
|---|
| Infocase Always On Case |
| Size: 325 x 240 x 20 mm |
| Weight: 0.22 kg |
Carrying Solutions
PCPE-INFG2XS
The Infocase Elastic X-Strap (PCPE-INFG2XS) provides a carrying solution for the TOUGHBOOK G2 Tablet.
| Key Features |
|---|
| Infocase Elastic X-Strap |
| Size: 160 x100 x 5 mm |
| Weight: 0.08 kg |
Carrying Solutions
PCPE-SYSLG15
The Dockable Case (PCPE-SYSLG15) is compatible for all TOUGHBOOK G1 models.
| Key Features |
|---|
| TOUGHBOOK G1 Dockable Case |
| Part no: PCPE-SYSLG15 |
| With breakable Velcro shoulder strap |
Carrying Solutions
PCPE-INFG2B1
The Infocase Mobility Bundle with Deluxe Shoulder Strap (PCPE-INFG2B1) provides carrying solutions for the TOUGHBOOK G2 Tablet.
| Key Features |
|---|
| Infocase Mobility Bundle with Deluxe Shoulder Strap |
| Size: 171 x 19 x 3 mm |
| Weight: 0.10 kg |
Carrying Solutions
FZ-VNSG21U
The Shoulder Strap (FZ-VNSG21U) is compatible for all TOUGHBOOK G2 models.
| Key Features |
|---|
| Shoulder Strap including screws |
| Size: 183cm x 3.8cm |
| Weight: 0.053 kg |
| Part no: FZ-VNSG21U |
Carrying Solutions
PCPE-INFSS03
The Infocase Heavy Duty Shoulder Strap (PCPE-INFSS03) is compatible for the TOUGHBOOK G2 Tablet.
| Key Features |
|---|
| Infocase Heavy Duty Shoulder Strap |
| Size: Size: 183cm x 3.8cm |
| Weight: 0.10 kg |
Carrying Solutions
PCPE-INFG2MF
The Infocase ModuFlex (PCPE-INFG2MF) is compatible for all TOUGHBOOK G2 models.
| Key Features |
|---|
| Infocase ModuFlex |
| Weight: 0.22 kg |
| Size: 270 x 190 x 6 mm |
| Part no: PCPE-INFG2MF |
Carrying Solutions
FZ-VSTN11BU
The Hand Strap (FZ-VSTN11BU) is designed for compatibility with TOUGHBOOK N1.
| Key Features |
|---|
| Adjustable to accommodate different hand sizes |
| Places hand in ideal position for access to barcode scanner activation buttons |
| Quick disconnect bottom snap to allow fast access to the battery for swaps |
| Can remain on the TOUGHBOOK N1 when cradled |
Carrying Solutions
PCPE-INFA3AO
The TOUGHMATE InfoCase Always-On Case (PCPE-INFA3AO) is designed for compatibility with TOUGHBOOK A3.
| Key Features |
|---|
| Slim and lightweight |
| Ergonomic hand strap |
| Shoulder strap can be attached directly |
| Accommodates the (PCPE-INFHRN1) Harness |
| NOT Compatible with TOUGHBOOK 20 |
Carrying Solutions
PCPE-INFA3XS
The TOUGHMATE InfoCase X Strap (PCPE-INFA3XS) is designed for compatibility with TOUGHBOOK G2, A3.
| Key Features |
|---|
| Economically priced and vehicle dock compatible |
| Designed to reduce wrist fatigue |
| Vinyl, Nylon, Steel |
| Designed to accommodate: Extended battery, Scanner, Smart Card Reader, and various docking stations |
Carrying Solutions
PCPE-INFS1HS
The InfoCase Hand Strap (PCPE-INFS1HS) is designed for compatibility with TOUGHBOOK S1.
| Key Features |
|---|
| Designed for use with the TOUGHBOOK S1 tablet only |
| Adjustable elastic handstrap that accommodate most hand sizes |
| Includes stylus loop |
| Materials: Elastic Velcro, vinyl, nylon cord, steel, acetal, elastic |
Carrying Solutions
PCPE-INFBPK1
The InfoCase Holster (PCPE-INFBPK1) is designed for compatibility with TOUGHBOOK 40, 33, 55, G2, A3, N1, S1.
| Key Features |
|---|
| Designed for use with TOUGHBOOK 40, 33, 55, G2, A3, N1, S1 |
| RoHS Compliant |
| Ergonomic padded shoulder straps and handle |
Carrying Solutions
PCPE-AGON1WM
The Agora Wrist Mount (PCPE-AGON1WM) is designed for compatibility with TOUGHBOOK N1.
| Key Features |
|---|
| Allows landscape or portrait orientation |
| Holds the TOUGHBOOK N1 comfortably |
Affichage 4 de 54
Mounts and Vehicle Docks
Mounts and Vehicle Docks
PCPE-HAV2007/08
The Notebook Dock (PCPE-HAV2007/08) is designed for compatibility with TOUGHBOOK G2 (20).
| Key Features |
|---|
| Ports: 2 x USB 3.0; 1 x LAN; 1 x Serial; 1 x HDMI; 1 x VGA |
| Optional dual antenna pass-through |
| 16V DC-in |
| TOUGHBOOK G2 (20) |
Mounts and Vehicle Docks
PCPE-HAVS101/02/03
The Vehicle Dock (PCPE-HAVS101/02/03) is designed to be compatible for use with TOUGHBOOK S1.
| Key Features |
|---|
| The vehicle dock is specifically designed for use with the TOUGHBOOK S1 tablet. |
| Does not include a power adaptor. |
| Designed with both VESA 75mm and AMPS mounting patterns. |
Mounts and Vehicle Docks
PCPE-CDSG1PM
The Passive Mount (PCPE-CDSG1PM) is designed for compatibility with TOUGHBOOK G1.
| Key Features |
|---|
| Non-Electronic Mount for TOUGHBOOK G1. |
| The mount features a VESA 75 mounting pattern, allowing it to be attached to compatible mounting solutions. |
| The mount includes an integrated stylus holder, providing a convenient place to store your stylus. |
| The mount has a rotating latch mechanism designed to securely hold the device in place. |
Mounts and Vehicle Docks
PCPE-GJA2V06/07/08/09/10
The Expanded Vehicle Dock (PCPE-HAV3316/17/18) is designed to be compatible for use with TOUGHBOOK A2, 20.
| Key Features |
|---|
| Ports (except non-electronic versions): 1 x 16V DC-In; 2 x USB 2.0; 1 x LAN |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Non-electronic cradle available |
| Keyed lock |
Mounts and Vehicle Docks
PCPE-HAV4005
The Vehicle Dock with Advanced Port Replication (PCPE-HAV4005) is designed for compatibility with TOUGHBOOK 40.
| Key Features |
|---|
| TOUGHBOOK 40 Vehicle Dock with Advanced Port Replication (with quad Antenna Pass-thru) |
| Ports: 2 x LAN, 2 x USB 2.0 type A, 1 x USB 2.0 Type C, 1 x USB 3.0 Type A, 1 x USB 3.0 Type C, 1 x Serial, 1 x HDMI |
| Quad Antenna Pass-thru |
| Compatible with TOUGHBOOK 40 |
Mounts and Vehicle Docks
PCPE-HAV4001
The Vehicle Cradle (PCPE-HAV4001) is designed for compatibility with TOUGHBOOK 40.
| Key Features |
|---|
| Non-electronic version of the vehicle cradle |
| Designed to securely hold and protect the TOUGHBOOK 40 in a vehicle |
| Provides a stable mounting solution without electronic components |
| Compatible with TOUGHBOOK 40 |
Mounts and Vehicle Docks
PCPE-HAV4002
The Vehicle Dock with Standard Port Replication (PCPE-HAV4002) is designed for compatibility with the TOUGHBOOK 40.
| Key Features |
|---|
| TOUGHBOOK 40 Vehicle Dock with Standard Port Replication (no Antenna Pass-thru) |
| Ports: x2 LAN, x2 USB 2.0 type A, x1 USB 2.0 Type c, x1 USB 3.0 Type A, x1 USB 3.0 type c, x1 Serial |
| Compatible with TOUGHBOOK 40 |
Mounts and Vehicle Docks
PCPE-HAV4003
The Vehicle Dock with Standard Port Replication (PCPE-HAV4003) is designed for compatibility with TOUGHBOOK 40.
| Key Features |
|---|
| TOUGHBOOK 40 Vehicle Dock with Standard Port Replication (with quad Antenna Pass-thru) |
| x2 LAN,x2 USB 2.0 type A, x1 USB 2.0 Type c, x1 USB 3.0 Type A, x1 USB 3.0 type c, x1 Serial |
| Quad Antenna Pass-thru |
| Compatible with TOUGHBOOK 40 |
Mounts and Vehicle Docks
PCPE-HAV4004
The Vehicle Dock with Advanced Port Replication (PCPE-HAV4004) is designed for compatibility with TOUGHBOOK 40.
| Key Features |
|---|
| TOUGHBOOK 40 Vehicle Dock with Advanced Port Replication (no Antenna Pass-thru) |
| Ports: 2 x LAN, 2 x USB 2.0 Type A, 1 x USB 2.0 Type C, 1 x USB 3.0 Type A, 1 x USB 3.0 Type C, 1 x Serial, 1 x HDMI |
| Compatible with TOUGHBOOK 40 |
Mounts and Vehicle Docks
PCPE-GJ20V07/08/09
The Vehicle Dock (PCPE-GJ20V07/08/09) is designed for compatibility with the TOUGHBOOK G2.
| Key Features |
|---|
| Ports (except non-electronic versions): 1 x 16V DC-in; 2 x USB 3.0; 1 x LAN; 1 x VGA; 1 x HDMI; 1 x Serial |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Non-electronic cradle available |
| Keyed lock |
Mounts and Vehicle Docks
PCPE-RAM202U
The Single Suction Cup Mount Kit for handhelds (PCPE-RAM202U) is designed for compatibility with the TOUGHBOOK N1.
| Key Features |
|---|
| The twist lock single suction cup provides a secure and reliable attachment mechanism. |
| The inclusion of a double socket arm with a standard length of 3 inches offers flexibility in positioning. |
| The AMPS round base adapter plate, equipped with a 1” ball, offers a versatile attachment point for the mount. |
| The full tilt and swivel capabilities of the mount provide you with the freedom to adjust the positioning of your TOUGHBOOK device. |
| The product is specifically designed to be used with TOUGHBOOK vehicle docks. |
Mounts and Vehicle Docks
PCPE-RAMFRK01/02/03
The Forklift Pillar Mounting Kit for Tablets (PCPE-RAMFRK01/02/03) is designed to be compatible for use with TOUGHBOOK 20 tablet, G1, A2, M1, B2 or L1.
| Key Features |
|---|
| 4” pillar clamp with 1.5” ball joint |
| 1.5" diameter double socket arm |
| VESA mounting plate with 1.5” ball |
| For use with TOUGHBOOK vehicle docks |
Mounts and Vehicle Docks
PCPE-RAMFRK04/05/06
The Forklift Pillar Mounting Kit for Handhelds (PCPE-RAMFRK04/05/06) is designed to be compatible for use with TOUGHBOOK L1, T1 and N1.
| Key Features |
|---|
| 4” pillar clamp with 1.5” ball joint |
| 1.5" diameter double socket arm |
| AMPS Round Base Adapter plate with 1.5” ball |
| Full tilt and swivel possible |
| For use with TOUGHBOOK vehicle docks |
Mounts and Vehicle Docks
PCPE-RAMFRK07/08/09
The Forklift Pillar Mounting Kit for Clamshells (PCPE-RAMFRK07/08/09) is designed for compatibility with TOUGHBOOK 33.
| Key Features |
|---|
| 4” pillar clamp with 2.25” ball joint |
| 2.25" diameter double socket arm |
| VESA mounting plate with 2.25” ball |
| Full tilt and swivel possible |
| For use with TOUGHBOOK vehicle docks |
Mounts and Vehicle Docks
PCPE-RAMWM01
The Double Suction Cup Mount Kit for Tablets (PCPE-RAMWM01) is designed to be compatible for use with TOUGHBOOK 33, 20, D1, A2, G1, M1, B2, L1.
| Key Features |
|---|
| Double twist lock suction cup base with AMPS hole pattern |
| AMPS Round Base Adapter plate with 1.5” ball |
| 1.5" diameter standard length (3”) double socket arm |
| VESA plate with 1.5” ball and 75x75mm and 100x100mm hole patterns |
| Full tilt and swivel possible |
Mounts and Vehicle Docks
PCPE-HAVA301/02/03
The Vehicle Dock (PCPE-HAVA301/02/03) is designed for compatibility with TOUGHBOOK A3.
| Key Features |
|---|
| Ports (except non-electronic version): 1x 16V DC-In, 2x USB 2.0, 1x LAN |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Slam latch mechanism for ease of use |
Mounts and Vehicle Docks
PCPE-GJM1V01/02
The Standard Vehicle Dock (PCPE-GJM1V01/02) is designed to be compatible for use with TOUGHBOOK M1.
| Key Features |
|---|
| Ports: 1 x 16V DC-in; 1 x LAN; 1 x VGA; 1 x HDMI; 1 x Serial; 2 x 3.0 USB |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Keyed lock |
| Can be mounted horizontally or vertically |
Mounts and Vehicle Docks
PCPE-HAVM101/02
The Vehicle Dock (PCPE-HAVM101/02) is designed to be compatible for use with TOUGHBOOK M1.
| Key Features |
|---|
| Ports: 1 x 16V DC-in; 1 x LAN; 1 x VGA; 1 x HDMI; 1 x Serial; 2 x 3.0 USB |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Keyed lock |
| Non-electronic version available |
Mounts and Vehicle Docks
PCPE-HAVM103/04/05
The Vehicle Dock (PCPE-HAVM103/04/05) is designed to be compatible for use with TOUGHBOOK M1, B2.
| Key Features |
|---|
| Ports: 1 x 16V DC-in; 1 x LAN; 2 x USB 2.0 |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Keyed lock |
| Non-electronic version available |
Mounts and Vehicle Docks
PCPE-GJN1V01/02/03/04
The Vehicle Dock (PCPE-GJN1V01/02/03/04) is designed for compatibility for TOUGHBOOK N1.
| Key Features |
|---|
| Power only - 16V DC-in |
| AMPS mounting pattern |
| Single handed dock and release mechanism |
| Accommodates extended battery and factory hand strap |
| Non-electronic cradle available |
Mounts and Vehicle Docks
PCPE-GJ33V01/02/03/04/05
The Vehicle Dock (PCPE-GJ33V01/02/03/04/05 ) is designed for compatibility with TOUGHBOOK 33 Tablet.
| Key Features |
|---|
| Ports (except non-electronic versions): 1 x 16V DC-in; 4 x USB 2.0; 2 x USB 3.0; 1 x LAN; 1 x HDMI*; 1 x VGA*; 1 x serial |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Non-electronic cradle available |
| Keyed lock |
Mounts and Vehicle Docks
PCPE-GJ33V06/07/08
The Vehicle Dock (PCPE-GJ33V06/07/08) is designed for compatibility with the TOUGHBOOK 33 Detached.
| Key Features |
|---|
| Ports (except non-electronic versions): 1 x 16V DC-in; 4 x USB 2.0; 2 x USB 3.0; 1 x LAN; 1 x HDMI; 1 x VGA; 1 x serial |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Non-electronic cradle available |
| Keyed lock |
Mounts and Vehicle Docks
PCPE-HAVG103/04/05
The Vehicle Dock (PCPE-HAVG103/04/05) is designed for compatibility with TOUGHBOOK G2 (G1).
| Key Features |
|---|
| Ports: 1 x 16V DC-in; 1 x Serial; 1 x VGA; 1 x HDMI; 2 x USB 3.0; 1 x LAN |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Keyed lock |
| Docking Station for TOUGHBOOK G2 Tablet with advanced port replication |
Mounts and Vehicle Docks
PCPE-GJ54V01/02/03
The Vehicle Dock (PCPE-GJ54V01/02/03) is designed for compatibility with TOUGHBOOK 55 only.
| Key Features |
|---|
| Ports: 1 X 16V DC-in; 1 x LAN ; 2 x USB 3.0; 1 x Serial; 1 x HDMI; 1 x VGA |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Non-electronic cradle available |
| Keyed lock |
Mounts and Vehicle Docks
PCPE-GJ33V09/10/11/12
The Slim Vehicle Dock (PCPE-GJ33V09/10/11/12) is designed to be compatible for use with TOUGHBOOK 33 tablets.
| Key Features |
|---|
| Ports (except non-electronic versions): 1 x 16V DC-in; 2 x LAN; 1 x Serial; 4 x USB 2.0; 2 x USB 3.0; 1 x HDMI; 1 x VGA |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Non-electronic cradle available |
| Keyed lock |
Mounts and Vehicle Docks
PCPE-HAV3316/17/18
The Vehicle Dock (PCPE-HAV3316/17/18) is designed to be compatible for use with TOUGHBOOK 33 Detached.
| Key Features |
|---|
| Ports (except non-electronic versions): 1 x 16V DC-in; 4 x USB 2.0 (2 front facing; 2 rear facing); 2 x USB 3.0; 2 x LAN; 1 x HDMI; 1 x VGA; 1 x Serial |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Keyed lock |
| Non-electronic cradle available |
Mounts and Vehicle Docks
PCPE-HAV3305/06/07/09/10
The Vehicle Dock (PCPE-HAV3305/06/07/09/10) is designed for compatibility with TOUGHBOOK 33 tablet.
| Key Features |
|---|
| Ports (except non-electronic versions): 16V DC-in; 4 x USB 2.0 (2 front facing; 2 rear facing); 2 x USB 3.0; 2 x LAN;1 x HDMI; 1 x VGA; 1 x Serial |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Keyed lock |
| Non-electronic cradle available |
Mounts and Vehicle Docks
PCPE-GJA3V01/02/03
The Vehicle Dock (PCPE-GJA3V01/02/03) is designed for compatibility with the TOUGHBOOK A3.
| Key Features |
|---|
| Ports (except non-electronic version): 1x 16V DC-In, 2x USB 2.0, 1x LAN |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
| Pinch lock mechanism for ease of use |
Mounts and Vehicle Docks
PCPE-HAV2010/11
The Notebook Dock (PCPE-HAV2010/11) is designed to be compatible for use with TOUGHBOOK 20, G2, when used with keyboard accessory.
| Key Features |
|---|
| TOUGHBOOK 20/G2 Notebook Dock (Havis) |
| 2 x USB 3.0; 1 x LAN; 1 x Serial; NO HDMI & VGA |
| Optional dual antenna pass-through |
| 16V DC-in |
| Size: 635 x 280 x 244 mm |
Mounts and Vehicle Docks
PCPE-CDSG2P1/P2
The Passive Mounts (PCPE-CDSG2P1/2) is designed for compatibility with TOUGHBOOK G2.
| Key Features |
|---|
| The PCPE-CDSG2P1/P2 passive mounts are designed specifically for TOUGHBOOK G2 devices. |
| Passive mounts provide a stable platform for your device without any electronic or moving parts. |
| Some passive mounts, including PCPE-CDSG2P1/P2, may come with a keyed lock. |
| Passive mounts can be used in a variety of settings, including vehicles, workstations, and other locations where a stable and secure device placement is required. |
Mounts and Vehicle Docks
PCPE-PMTG201/02
The Vehicle dock without Dual Pass through (PCPE-PMTG201/202) is designed for compatibility with TOUGHBOOK G2.
| Key Features |
|---|
| The dock is designed to securely hold and mount a TOUGHBOOK G2 tablet. |
| Serial Port 4 x USB 2.0 Ports, 2 x USB 3.2 Ports, 2 x HDMI Ports, LAN Port, 15VDC DC-IN Port |
| The dock offers the option for dual antenna pass-through, allowing for enhanced wireless connectivity when needed. |
| The dock features a VESA 75 mounting pattern, enabling compatibility with various VESA mounting solutions. |
| The dock is designed to be compatible with TOUGHBOOK G2. |
Mounts and Vehicle Docks
PCPE-PMTG203
The Tablet Vehicle Dock, no electronics (PCPE-PMTG203) is designed for compatibility with TOUGHBOOK G2.
| Key Features |
|---|
| The dock is designed to securely hold and mount a TOUGHBOOK G2 tablet. |
| The dock is a non-electronic model, focused on providing physical support without additional electronic features. |
| The dock features a VESA 75 mounting pattern, allowing it to be attached to compatible mounting solutions. |
| The dock is designed to be compatible with TOUGHBOOK G2 tablets. |
Mounts and Vehicle Docks
PCPE-GJG1V09
The Standard Vehicle Dock (PCPE-GJG1V09) is designed for compatibility with TOUGHBOOK G2.
| Key Features |
|---|
| Serial; 2 x USB 3.0; LAN; 16V DC-in, NO HDMI & VGA |
| Optional dual antenna pass-through |
| VESA 75 mounting pattern |
Affichage 4 de 33
Power Adaptors and Charging
Power and Chargers
CF-AA6413AE/G/T/D
The Spare Power Supply Unit (CF-AA6413AE/G/T/D) is design for compatibility with TOUGHBOOK 20, G1, M1, A3.
| Key Features |
|---|
| Spare Power Supply |
| Input: 100V - 240V AC |
| Output: 16V DC, 4.06A |
Power and Chargers
CF-VCB331E/G/T/D
The 4-bay Battery Charger (CF-VCB331E/G/T/D) is designed for compatibility with TOUGHBOOK 33.
| Key Features |
|---|
| 4 bay Battery Charger |
| Input: 100V - 240V AC, 50Hz / 60Hz |
| Output: 15.6V DC, 7.05A |
| Includes power adaptor |
Power and Chargers
FZ-AAE184EE/G
The USB Charger Kit (FZ-AAE184EE/G) is designed to be compatible with TOUGHBOOK L1, N1, T1, S1.
| Key Features |
|---|
| USB Charger Kit (UK): Can be used to power the TOUGHBOOK S1, N1, T1 and L1 directly (via USB Type-C) |
| Input: 100V - 240V AC, 50Hz / 60Hz |
| Output: 5.0V VDC, 1.8A |
| Including USB cable |
Desktop Port Replicators
FZ-VCBN11U
The Desktop Port Replicator (FZ-VCBN11U) is compatible for both the TOUGHBOOK N1 and F1 models.
| Key Features |
|---|
| Designed as a charging cup specifically for TOUGHBOOK N1 models. |
| The charging cup does not include an AC adapter. |
Power and Chargers
FZ-VCBN131AD/E/3
The 5-Bay Battery Charger (FZ-VCBN131AD/E/3) is designed to be compatible with TOUGHBOOK F1, N1.
| Key Features |
|---|
| 5-Bay Battery Charger (incl. adaptor) |
| Input: 100V - 240V AC, 50Hz / 60Hz |
| Output: 15.6V, 7.05A |
| Battery Charging: 4.35V, 3A |
| Includes AC Adaptor CF-AA5713A* |
Desktop Port Replicators
FZ-VCBN1413/D/E
The Desktop Port Replicator or Battery Charger (FZ-VCBN1413/D/E) is a series of 5-bay charging cradles that allow you to charge 5 batteries simultaneously, compatible with both TOUGHBOOK N1 and F1 models.
| Key Features |
|---|
| 5 bay Charging Cradle |
| Input: 100V - 240V AC, 50Hz / 60Hz |
| Output: 15.6V, 7.05A |
| Includes AC adaptor CF-AA5713A* |
Power and Chargers
FZ-VCBN141D
5 bay Charging Cradle (incl. swiss AC adaptor)
| Key Features |
|---|
| 5 bay Charging Cradle (incl. swiss AC adaptor) |
| Input: 100V - 240V AC, 50Hz / 60Hz |
| Output: 15.6V, 7.05A |
| Including CF-AA5713AD |
Power and Chargers
FZ-VCBN141E
5 bay Charging Cradle (incl. UK AC adaptor)
| Key Features |
|---|
| 5 bay Charging Cradle (incl. UK AC adaptor) |
| Input: 100V - 240V AC, 50Hz / 60Hz |
| Output: 15.6V, 7.05A |
| Including CF-AA5713AE |
Power and Chargers
CF-LND1224A
The Car charger (CF-LND1224A) is designed to be compatible with ALL TOUGHBOOK devices.
| Key Features |
|---|
| Input Voltage: 12V to 32V DC |
| Output Power: 15VDC @ 8.0A |
| Input Cable: Detachable, 92cm, Cigarette Plug |
| Output Cable: Detachable, 92cm, yellow DC Plug |
Power and Chargers
CF-LND80S-FD
The Car charger (LIND) with Cigarette Plug (CF-LND80S-FD) is designed to be compatible with TOUGHBOOK G2 (via vehicle dock), A3.
| Key Features |
|---|
| Input Voltage: 12V to 16V DC |
| Output Power: 15VDC @ 6.0A |
| Input Cable: Detachable, 92cm, Cigarette Plug |
| Output Cable: Detachable, 92cm, yellow DC Plug |
Power and Chargers
CF-LND1272BW
The LIND Car charger 90W (9 to 34VDC) with bare wire (CF-LND1272BW) is designed for compatibility with TOUGHBOOK G2 (via vehicle dock), A3.
| Key Features |
|---|
| Input Voltage: 9V to 34V DC |
| Output Power: 15VDC @ 6.0A |
| Input Cable: Hardwired, 92cm, bare wire |
| Output Cable: Hardwired, 92cm, yellow DC Plug |
Power and Chargers
PCPE-LNDFHWR
The Rugged isolated DC/DC Power Adapter (PCPE-LNDFHWR) is designed for compatibility with TOUGHBOOK 20, G1, M1, A3, 33, G2.
| Key Features |
|---|
| Rugged isolated DC/DC Power Adapter (12 to 60VDC Input) |
| Compatible with TOUGHBOOK 20, G1, M1, A3, 33, G2 |
Power and Chargers
CF-LND8024FD
The Car charger with input cable fitted with cigarette lighter plug (CF-LND8024FD) is designed to be compatible with TOUGHBOOK G2 (via vehicle dock), A3, F1, N1.
| Key Features |
|---|
| Input Voltage: 12V to 32V DC |
| Output Power: 15VDC @ 6.0A |
| Input Cable: Detachable, 92cm, Cigarette Plug / Bare Wire |
| Output Cable: Detachable, 92cm, yellow DC Plug |
| Operating Temperature: -20 to +40 °C |
Power and Chargers
PCPE-LNDL122
The 5V Car Charger (PCPE-LNDL122) is designed for compatibility with TOUGHBOOK L1, S1 (via vehicle dock).
| Key Features |
|---|
| Input Voltage: 12-32V DC |
| Input Cable: Detachable, 92cm, Cigarette Plug |
| Output Cable: Detachable, 92cm, 1.7mm DC Plug |
| Operating Temperature: -20 to +40 °C |
Power and Chargers
5-Bay Battery Charger: FZ-VCBT131x
The 5-Bay Battery Charger (FZ-VCBT131E/3/D) is designed for compatibility with TOUGHBOOK A3, S1.
| Key Features |
|---|
| 5-Bay Battery Charger |
| AC adapter is included |
Power and Chargers
CF-LND1246
The NATO SPEC LIND Car charger (CF-LND1246) is designed for compatibility with TOUGHBOOK G2 (via vehicle dock), A3.
| Key Features |
|---|
| Input Voltage: 9V to 34V DC |
| Output Power: 15VDC @ 6.0A |
| Input Cable: Detachable, 92cm, Cigarette Plug |
| Output Cable 1: Detachable, 92cm, yellow DC Plug |
Power and Chargers
CF-LND1272
The LIND Car charger 90W (9 to 34VDC) (CF-LND1272BW) is designed for compatibility with TOUGHBOOK 55, G2 (via vehicle dock), A3.
| Key Features |
|---|
| Input Voltage: 9V to 34V DC |
| Output Power: 15VDC @ 6.0A |
| Input Cable: Hardwired, 92cm, Cigarette Plug |
| Output Cable: Hardwired, 92cm, yellow DC Plug |
Power and Chargers
CF-LND80SBW
The LIND Car charger, EIAJ & TypeA both, 80W (12 - 16VDC) with bare wire (CF-LND80SBW) is designed for compatibility with TOUGHBOOK G2 (via vehicle dock), A3.
| Key Features |
|---|
| Input Voltage: 12V to 16V DC |
| Output Power: 15VDC @ 6.0A |
| Input cable: Detachable, 92cm, bare wire |
| Output Cable: Detachable, 92cm, yellow DC Plug |
| Includes mounting bracket |
Power and Chargers
CF-LND80SLBW
Rugged DCDC Auto Power Adaptor (90W, 12-16 VDC input) - Long Bare Wire
| Key Features |
|---|
| Input Voltage: 12V to 16V DC |
| Output Power: 15VDC @ 6.0A |
| Input cable: Detachable, 92cm, bare wire |
| Output cable: Detachable, 244cm, yellow DC Plug |
| Includes mounting bracket |
Power and Chargers
CF-LND80SXLR
Rugged DCDC Auto Power Adaptor (90W, 12-16 VDC input) - XLR Connector
| Key Features |
|---|
| Input Voltage: 12V to 16V DC |
| Output Power: 15VDC @ 6.0A |
| Input cable: Detachable, 114 cm with XLR connector |
| Output Cable: Detachable, 92cm, yellow DC Plug |
Power and Chargers
CF-LNDMLSTD
The LIND Mil spec Vehicle Charger, 90W (11 to 32VDC) is designed for compatibility with TOUGHBOOK G2 (via vehicle dock), A3.
| Key Features |
|---|
| Input Voltage: 11V to 32V DC |
| Output Power: 15VDC @ 6.0A |
| Input Cable: Hardwired, 184cm, bare wire |
| Output Cable: Hardwired, 183cm, yellow DC plug |
| Operating Temperature: -40 to +60 °C |
Power and Chargers
PCPE-LNDAC01
Additional Specs:- Operating Temperature: 0 to +35 °C - Storage Temperature: -40 to +85 °C- Includes USB socket to power other devices (cable not included)
| Key Features |
|---|
| AC/DC & DC/DC combo power adaptor |
| Input voltage: 12V to 16V DC, 100V to 240V AC |
| Output power:15VDC @ 6.0A |
| Input Cable: Detachable, 46cm, Cigarette Plug; Detachable, 190cm, AC Input Plug |
| Output Cable: Detachable, 92cm, DC Plug |
Power and Chargers
PCPE-LNDMLSP
The MIL SPEC Rugged DC/DC Auto Power Adaptor (90W) with Ring Terminals is designed for compatibility with TOUGHBOOK A3.
| Key Features |
|---|
| Input Voltage: 11V to 32V DC |
| Output Power: 15VDC @ 6.0A |
| Input Cable: Hardwired, 445cm with Ring Terminals |
| Output Cable: Hardwired, 214cm, yellow DC plug |
| Operating Temperature: -40 to +60 °C |
Power and Chargers
PCPE-LNDL133
The 5 V car charger with bare wires designed for compatibility with TOUGHBOOK S1 vehicle dock.
| Key Features |
|---|
| Input Voltage: 12-32V DC |
| Input Cable: Detachable, 92cm, bare wire |
| Output Cable: Detachable, 92cm, 1.7mm DC Plug |
| Operating Temperature: -20 to +40 °C |
Power and Chargers
PCPE-LNDG1CE/F/G
Part Numbers: - PCPE-LNDG1CE – 3-bay battery charger with UK power adaptor- PCPE-LNDG1CF – 3 bay battery charger with Italian power adaptor- PCPE-LNDG1CG – 3 bay battery charger with Continental power adaptor
| Key Features |
|---|
| Input Voltage: 15.1V to 16V DC |
| Simultaneously charge up to 3x TOUGHBOOK G1 batteries |
| Designed to charge both, the standard and long life batteries |
| Operating Temperature: +5 to +35 °C |
Power and Chargers
PCPE-LND1234
The LIND 32W 12-32Vdc input with cigarette lighter plug (PCPE-LND1234) is designed for compatibility with TOUGHBOOK A3, N1.
| Key Features |
|---|
| Low power 32 Watt charging adaptor for use with THE TOUGHBOOK N1 vehicle dock |
| Input Voltage: 12-32V DC |
| Input Cable: Detachable, 92cm, Cigarette Plug |
| Output Cable: Detachable, 92cm, yellow DC Plug |
| Operating Temperature: -20 to +40 °C |
Power and Chargers
PCPE-LND3676
The LIND Mil Spec Adaptor 120W (22-32VDC) with bare wire input cable (PCPE-LND3676) is design for compatibility with TOUGHBOOK 40, 33, 55, G2.
| Key Features |
|---|
| Input Voltage: 22V to 32V DC |
| Output Power: 16VDC @ 8.0A |
| Input Cable: Hardwired, 184cm, bare wire |
| Output Cable: Hardwired, 183cm, yellow DC plug |
| Operating Temperature: -40 to +50 °C |
Power and Chargers
PCPE-LNDMLDC
Additional specs:- Storage Temperature: -40 to +85 °C- Meets MIL-STD-810G, MIL-STD1275D and MIL-STD461F- Meets RTCA/DO-160D
| Key Features |
|---|
| Input Voltage: 11V to 32V DC |
| Output Power: 15VDC @ 6.0A |
| Input Cable: Hardwired, 35cm with Deutsch connector |
| Output Cable: Hardwired, 183cm, yellow DC plug |
| Operating Temperature: -40 to +60 °C |
Power and Chargers
PCPE-LND1214
The LIND 32W 12-16Vdc input with cigarette lighter plug (PCPE-LND1214 ) is designed for compatibility with TOUGHBOOK A3, N1.
| Key Features |
|---|
| Low power 32 Watt charging adaptor for use with THE TOUGHBOOK A3, N1 vehicle dock |
| Input Voltage: 12-16V DC |
| Input Cable: Detachable, 92cm, Cigarette Plug |
| Output Cable: Detachable, 92cm, yellow DC Plug |
| Operating Temperature: -20 to +40 °C |
Power and Chargers
PCPE-LNDT122
Additional Specs:- Storage Temperature: -40 to +85 °C
| Key Features |
|---|
| Input Voltage: 12-32V DC |
| Input Cable: Detachable, 92cm, Cigarette Plug |
| Output Cable: Detachable, 92cm, Micro-USB Plug |
| Operating Temperature: -20 to +40 °C |
Power and Chargers
PCPE-LNDFH11/32/60
The LIND Car Charger - For forklift is designed for compatibility with TOUGHBOOK 33, G2 (via vehicle dock), A3, N1.
| Key Features |
|---|
| Output Power: 15VDC @ 6.0A |
| Input Cable: Hardwired, 184cm, bare wires with inline fuse |
| Output Cable: Hardwired, 184cm, yellow DC Plug |
| Operating Temperature: -40 to +40 °C |
| Storage Temperature: -40 to +85 °C |
Power and Chargers
PCPE-LND4530
Additional specs:- Operating Temperature: -20 to +40 °C- Storage Temperature: -40 to +85 °C
| Key Features |
|---|
| Input Voltage: 12V to 16V DC |
| Output Power: 15VDC @ 6.0A |
| Input cable: Hardwired, 92cm, Cigarette Plug |
| Output Cable: Detachable, 92cm, yellow DC Plug |
Power and Chargers
CF-AA5713A2E/G/T/D
The Vehicle dock is designed for compatibility with TOUGHBOOK 55.
| Key Features |
|---|
| Spare Power Supply |
| Input: 100V - 240V AC |
| Output: 15.6 V DC, 7.05 A |
| Minimum order quantity: 10pcs |
Power and Chargers
CF-LND8024BW
The Car charger (LIND) with bare wire input cable (CF-LND8024BW) is designed to be compatible with TOUGHBOOK G2 (via vehicle dock), A3, F1, N1.
| Key Features |
|---|
| Input Voltage: 12V to 32V DC |
| Output Power: 15VDC @ 6.0A |
| Input Cable: Detachable, 92cm, Cigarette Plug / Bare Wire |
| Output Cable: Detachable, 92cm, yellow DC Plug |
| Operating Temperature: -20 to +40 °C |
Power and Chargers
FZ-VCB551/E/G/D/T
A series of 4 Bay Battery Chargers (FZ-VCB551/E/G/D/T) that can charge up to 4 batteries simultaneously, compatible to be used with TOUGHBOOK 55 models.
| Key Features |
|---|
| 4 bay Battery Charger |
| Including CF-AA5713A2E/CF-AA5713A2D/CF-AA5713A2G/CF-AA5713A2T |
Power and Chargers
PCPE-LNDS1USBC
The LIND USBC Charging Cable (PCPE-LNDS1USBC) is designed for compatibility with TOUGHBOOK S1 (with PCPE LNDL122 or PCPE LINDL123 adaptors).
| Key Features |
|---|
| Compatible with TOUGHBOOK S1 (with PCPE-LNDL122) |
| Only for use with PCPE LNDL122 or PCPE LINDL123 adaptors, in place of the supplied cable, for charging the S1 directly. |
Affichage 4 de 36
Batteries
Batteries
CF-VZSU1AW
The Standard Li-Ion Battery Pack (CF-VZSU1AW) is designed for compatibility with the TOUGHBOOK 33.
| Key Features |
|---|
| Replacement battery for the TOUGHBOOK 33 |
| Capacity: 22 Whr |
Batteries
CF-VZSU1BW
The Standard Li-Ion Battery Pack (CF-VZSU1BW) is designed for compatibility with the TOUGHBOOK 33.
| Key Features |
|---|
| Replacement battery for the TOUGHBOOK 33 |
| Capacity: 44 Whr |
| Please note: Extended batteries are compatible only with main units configured for an extended battery. |
Batteries
FZ-VZSU84A2U
The Standard Battery Pack (FZ-VZSU84A2U) is designed for compatibility with the TOUGHBOOK G1.
| Key Features |
|---|
| Replacement battery for the TOUGHBOOK G1 |
| Capacity: 46 Whr |
| Double lock structure |
| Easy field replaceable structure |
Batteries
FZ-VZSU88U
The Li-Ion Extended Battery Pack (FZ-VZSU88U) is designed for compatibility with the TOUGHBOOK G1.
| Key Features |
|---|
| Replacement long life battery for the TOUGHBOOK G1 |
| Capacity: 94 Whr |
Batteries
FZ-VZSU94W
The Li-ion Battery Pack (FZ-VZSU94W) is designed for compatibility with the TOUGHBOOK M1 and B2 models.
| Key Features |
|---|
| Replacement battery for the TOUGHBOOK M1 or B2 |
| Capacity: 23 Whr |
Batteries
FZ-VZSUN110U
The Standard Li-Ion Battery Pack (FZ-VZSUN110U) is designed for compatibility with the TOUGHBOOK N1.
| Key Features |
|---|
| Replacement battery for the TOUGHBOOK N1 |
| Capacity: 12 Whr |
Batteries
FZ-VZSUN120U
The Extended Li-Ion Battery with Back case (FZ-VZSUN120U) is designed for compatibility with the TOUGHBOOK N1.
| Key Features |
|---|
| Replacement long life battery for the TOUGHBOOK N1 |
| Capacity: 24 Whr |
Batteries
FZ-VZSUT10U
The Slim Battery Pack (FZ-VZSUT10U) is designed for compatibility with the TOUGHBOOK A3 and S1 models.
| Key Features |
|---|
| Slim Battery Replacement Pack for the TOUGHBOOK S1 |
| Capacity: 12 Whr |
| 3200 mAh Lithium-Ion battery |
Batteries
FZ-VZSU1HU
The Battery Pack (FZ-VZSU1HU) is designed for compatibility with the TOUGHBOOK 55.
| Key Features |
|---|
| Battery Pack |
| 6 cells, 68Whr |
Batteries
FZ-VZSUT11U
The Extended Battery Pack (FZ-VZSUT11U) is designed for compatibility with the TOUGHBOOK A3 and S1 models.
| Key Features |
|---|
| Slim Battery Replacement Pack for the TOUGHBOOK A3 & S1 |
| Capacity: 5.580 mAh |
| 5580 mAh Lithium-Ion battery |
Batteries
FZ-VZSU1VU
The Long-life Battery Pack (FZ-VZSU1VU) is designed for compatibility with the TOUGHBOOK G2 (QR SSD) model.
| Key Features |
|---|
| User-replaceable; can be easily removed using quick-release lever |
| Provides up to 18.5 hours of battery life (MobileMark 2014) |
| Charges in 3 hours |
Batteries
FZ-VZSU1TU
The Standard Battery (FZ-VZSU1TU) is a battery pack designed for compatibility with the TOUGHBOOK G2 Standard.
| Key Features |
|---|
| The battery has a capacity of 50Whr |
| Designed for the TOUGHBOOK G2 STANDARD model |
Batteries
FZ-VZSU1UU
The Long-life Battery Packy (FZ-VZSU1UU) is a battery pack designed for compatibility with the TOUGHBOOK G2 Standard.
| Key Features |
|---|
| The battery has a capacity of 68Whr |
| Designed for the TOUGHBOOK G2 STANDARD model |
Batteries
FZ-VZSUN120W
The Extended Li-Ion Battery without Back case (FZ-VZSUN120W) is designed for compatibility with the TOUGHBOOK N1.
| Key Features |
|---|
| The battery must be used with the long-life TOUGHBOOK N1 battery cover/door. |
| The battery has a capacity of 6400 mAh and uses Lithium-Ion (Li-Ion) technology. |
| The battery is not compatible with the N1 Tactical. |
Batteries
FZ-VZSU1XU
The Li-ion Battery Pack (FZ-VZSU1XU) has an impressive 18 hours of battery life and charged in 3 hours, fully compatibility for the TOUGHBOOK 40.
| Key Features |
|---|
| Provides 18 hours of battery life |
| Charges in 3 hours |
| User-replaceable |
| Can easily be removed using pull tab |
Affichage 4 de 15
Port replicators
Desktop Port Replicators
CF-VEB201U
The Desktop Port Replicator (CF-VEB201U) is designed for compatibility with TOUGHBOOK G2, G1 models
| Key Features |
|---|
| 2 x USB 2.0 / 2 x USB 3.0; 1 x RJ-45; |
| HDMI × 1 For exclusive use with HDMI standard |
| Mini Dsub 15-pin female (Analog interface) |
| Dsub 9-pin male |
Desktop Port Replicators
FZ-VEBG11AU
The Desktop Cradle (FZ-VEBG11AU) is designed for compatibility with TOUGHBOOK G1, G2 models.
| Key Features |
|---|
| 2x USB 3.0 (Allowable current for each port : 900 mA) |
| RJ-45 × 1 (100MBit); 1 x HDMI |
| Expansion Bus Connector 24-pin |
| Dsub 9-pin male (Analog interface) |
| Mini Dsub 15-pin female (Analog interface) |
Desktop Port Replicators
FZ-VEBN111E/3/D
The Single Device Cradle (FZ-VEBN111E/3/D) is a desktop port replicator or cradle designed for compatibility with TOUGHBOOK N1, F1 models.
| Key Features |
|---|
| External bus connector 9 pins |
| RJ-45 × 1 |
| USB 2.0 x2 |
| Includes AC adaptor |
Desktop Port Replicators
FZ-VEBN121E/3/D
The 4-bay Device Cradle (FZ-VEBN121E/3/D) is designed for compatibility with TOUGHBOOK N1, F1 devices.
| Key Features |
|---|
| External bus connector 9 pins x 4 |
| RJ-45 × 2 |
| USB 2.0 x4 |
| Includes AC adaptor |
Desktop Port Replicators
FZ-VEBN141E/3/D
The 5-bay Multi Device Cradle (FZ-VEBN141E/3/D) is a desktop port replicator designed for compatibility with TOUGHBOOK N1.
| Key Features |
|---|
| RJ-45 Ports (x2) |
| Includes AC Adapter |
Desktop Port Replicators
CF-VEB331U
The Desktop Port Replicator - with Kensington lock slot (CF-VEB331U) is a desktop port replicator designed for compatibility for TOUGHBOOK 33.
| Key Features |
|---|
| Expansion Bus Connector 24-pin |
| USB 2.0 × 4 / USB 3.0 × 2; 2 x RJ-45; 1 x HDMI |
| Mini Dsub 15-pin female (Analog interface) |
| Dsub 9-pin male |
Desktop Port Replicators
FZ-VCBT131E/3/D
The 5-Bay Battery Charger (FZ-VCBT131E/3/D) is designed for compatibility with TOUGHBOOK T1, L1, S1, and A3 devices.
| Key Features |
|---|
| Includes AC adaptor |
| Allows you to charge up to five batteries at once. |
Desktop Port Replicators
FZ-VEH5L1AA3/E/D
The 5-Bay Desktop Cradle (FZ-VEH5L1AA3/E/D) is designed to be compatible with TOUGHBOOK S1, L1 devices.
| Key Features |
|---|
| Operating Temperature: 0 ºC - 40 ºC |
| AC adaptor included. (CF-AA5713A) |
| Dimensions: Approx. 400 mm x 215 mm x 78 mm |
| Weight: Approx. 1.5 kg |
| LAN Port: 2 ports (10Base-T / 100Base-TX / 1000Base-T) |
Desktop Port Replicators
FZ-VCH5L1AA3/E/D
The 5-Bay Charge-Only Cradle (FZ-VCH5L1AA3/E/D) is designed for compatibility with TOUGHBOOK S1, L1 devices.
| Key Features |
|---|
| Includes AC adaptor (CF-AA5713A) |
| Can charge and cradle up to five devices |
Desktop Port Replicators
FZ-VEH1L1AAE/3
The Single Single Device Desktop Cradle (FZ-VEH1L1AAE/3) is designed for compatibility with TOUGHBOOK S1, L1 devices.
| Key Features |
|---|
| USB Port: USB2.0 x 1 ports (micro USB type-B) |
| AC adaptor included. (CF-AA5713A) |
| Operating Temperature: 0 ºC - 40 ºC |
Desktop Port Replicators
FZ-VEB551U
The Desktop Port Replicator (FZ-VEB551U) is compatible for the TOUGHBOOK 55 models.
| Key Features |
|---|
| I/O includes USB-A (4), HDMI (2), VGA, Serial, LAN |
| Includes a power button for convenient access and a Kensington lock slot |
| AC Adapter not included |
| Fits any configuration of the TOUGHBOOK 55 (not compatible with TOUGHBOOK 54) |
Desktop Port Replicators
FZ-VEBA21U
The Desktop Port Replicator or Cradle (FZ-VEBA21U) is compatible for the TOUGHBOOK A3 models.
| Key Features |
|---|
| Cradle (Single) |
| Expansion Bus Connector 25-pin |
| USB Port*1 USB 3.0 × 2 |
| LAN Port RJ-45 × 1 |
Desktop Port Replicators
FZ-VEBG21U
The Desktop Port Replicator or Cradle (FZ-VEBG21U) is compatible for the TOUGHBOOK G2 models.
| Key Features |
|---|
| USB3.0 x2, USB2.0 x2, HDMI (4K) x2, Serial, LAN (Gbit) |
| Features Kensington lock slot |
| AC adapter not included |
| Compatible with TOUGHBOOK G2 |
Desktop Port Replicators
FZ-VEB401U
The Desktop Port Replicator (FZ-VEB401U) is designed to provide connectivity and functionality in a desktop environment, fully compatible for the TOUGHBOOK 40.
| Key Features |
|---|
| Desktop Port Replicator |
| 2x USB 3.1 Type C (supports DP Alt Mode), 1x USB 2.0 Type C, 1x USB 3.1 Type A, 2x USB 2.0 |
| 1x HDMI 2.0, 2x Gigabit LAN, 1x USB Serial, 1x DC-In |
| No AC Adapter or cables included |
Desktop Port Replicators
CF-VEB541AU
The Desktop Port Replicator (CF-VEB541AU) is designed to provide connectivity and functionality in a desktop environment, fully compatible for the TOUGHBOOK 55(54).
| Key Features |
|---|
| USB Ports: 2 x USB 2.0 ports, 2 x USB 3.0 ports |
| Ethernet Port: 1 x RJ-45 Ethernet port for network connectivity |
| Video Output: 1 x HDMI port |
| Analog Video Output: 1 x Mini Dsub 15-pin female port |
| Serial Port: 1 x Dsub 9-pin male port |
Desktop Port Replicators
FZ-VCBN1413/D/E
The Desktop Port Replicator or Battery Charger (FZ-VCBN1413/D/E) is a series of 5-bay charging cradles that allow you to charge 5 batteries simultaneously, compatible with both TOUGHBOOK N1 and F1 models.
| Key Features |
|---|
| 5 bay Charging Cradle |
| Input: 100V - 240V AC, 50Hz / 60Hz |
| Output: 15.6V, 7.05A |
| Includes AC adaptor CF-AA5713A* |
Desktop Port Replicators
FZ-VCBN11U
The Desktop Port Replicator (FZ-VCBN11U) is compatible for both the TOUGHBOOK N1 and F1 models.
| Key Features |
|---|
| Designed as a charging cup specifically for TOUGHBOOK N1 models. |
| The charging cup does not include an AC adapter. |
Desktop Port Replicators
CF-VEB332W
The Desktop Port Replicator (CF-VEB332W) is compatible for only the TOUGHBOOK 33 model.
| Key Features |
|---|
| Use CF-AA5713A |
| USB 3.0 x2, USB 2.0 x2, HDMI x2, LAN x2, VGA x1 |
| Kensington security slot |
Affichage 4 de 18
Keyboards
Keyboards
PCPE-KEYB
The Mini USB Keyboard with integrated touchpad (PCPE-KEYB) is designed for compatibility with TOUGHBOOK G2, A3, N1, S1.
| Key Features |
|---|
| Compatible with TOUGHBOOK G2, A3, N1, S1 |
| Integrated touchpad |
Keyboards
PCPE-ACCABK1/2/3/4
The Mini Antibacterial USB Keyboard (PCPE-ACCABK1/2/3/4) is designed to be compatible with TOUGHBOOK 33, G2, A3, F1/N1, S1 models.
| Key Features |
|---|
| USB connection |
| Fully sealed silicone casing, dust, water and chemical resistant, IP67 rated |
| Mini key layout with clear and easy to read key legends |
| Integrated mousepad with left and right mouse buttons |
| Passes the JIS Z 2801:2001 antimicrobial test standards |
Keyboards
PCPE-ACDSFR1/ UK1/ GR1
The Mini Rugged Bluetooth Keyboard (PCPE-ACDSFR1/ UK1/ GR1) is designed to be compatible with TOUGHBOOK 33, G2, A3, F1/N1, S1 models.
| Key Features |
|---|
| USB and Bluetooth connectivity |
| Mini key layout |
| Black silicone rubberised finish with white key legends |
| Rigid and rugged, splash proof and wipeable |
Keyboards
PCPE-LOGM901
The USB Wired Optical Mouse (PCPE-LOGM901) is designed for compatibility with TOUGHBOOK 40, 33, 55, G2, A3, F1/N1, S1 (with USB-A dock).
| Key Features |
|---|
| USB plug and play connection - no software to install |
| Precise, high-definition optical tracking |
| Full-size comfort, ambidextrous design |
Keyboards
PCPE-MMRK01E/F/G
The Rugged USB In-Vehicle Keyboard (PCPE-MMRK01E/F/G) is designed to be compatible with TOUGHBOOK D1, 54, 33, 20, G1,M1, XZ6.
| Key Features |
|---|
| Rugged, USB keyboard specially suited to in-vehicle applications |
| IP64 rated |
| Oil-safe silicone coated |
| Multi-level LED backlight |
| AMPS & VESA mount included |
Keyboards
FZ-VEKG21L*
Emmissive backlit keyboard
| Key Features |
|---|
| Emmissive backlit keyboard for TOUGHBOOK G2 |
| x1 USB 3.0 type A |
| x1 USB-Type c |
| Fully Rugged, IP65 |
Affichage 4 de 6
Protection & Security
Protection & Security
FZ-VPF38U
The 10.1" Display Protection (FZ-VPF38U) is designed for compatibility with TOUGHBOOK G2.
| Key Features |
|---|
| 10.1" Display Protection Film for TOUGHBOOK G2 |
| User-replaceable |
| Protects the display from scratches |
Protection & Security
PCPE-KENLOK2
Locks into the standard Kensington security slot found in 99% of notebooks, and many flat panel monitors, CPUs, projectors, printers, docking stations, tablet PCs and other devices.
| Key Features |
|---|
| Super-strong, steel composite cable with carbon tempered steel core |
| Built-in tamper evident feature to detect unauthorised use |
| Patented T-bar lock provides superior lock strength and theft protection |
| Easy to install and use in the office or when travelling |
| Sleek styling and design won’t block notebook ports or lift a notebook off the desk |
Miscellaneous
PCPE-KENLOK1
The Kensington Lock (PCPE-KENLOK1) is designed for compatible with TOUGHBOOK G2.
| Key Features |
|---|
| Super-strong, steel composite cable with carbon tempered steel core |
| Built-in tamper evident feature to detect unauthorised use |
| Patented T-bar lock provides superior lock strength and theft protection |
| Easy to install and use in the office or when travelling |
| Sleek styling and design won’t block notebook ports or lift a notebook off the desk |
Protection & Security
FZ-VPFG11U
FZ-VPFG11U
| Key Features |
|---|
| LCD Protective Film for TOUGHBOOK G1 |
| Screen Size: 10.1" |
| Replacement for protective film pre-installed on TOUGHBOOK |
Protection & Security
PCPE-INFG2TG1
The InfoCase TOUGHMATE Screen Protector (PCPE-INFG2TG1) is designed for compatibility with TOUGHBOOK G2.
| Key Features |
|---|
| Tempered glass for Panasonic FZ-G2 |
| Dust resistant |
Protection & Security
CF-VPF29U
The LCD Protective Film (CF-VPF29U) is design for compatibility with TOUGHBOOK 55, 54 HD.
| Key Features |
|---|
| LCD Protective Film for TOUGHBOOK 55, 54 HD |
| Screen size: 14" |
| User replaceable |
| Protects the display from scratches |
Protection & Security
PCPE-INFG2PF1
The InfoCase TOUGHMATE Privacy screen (PCPE-INFG2PF1) is designed to be compatible with TOUGHBOOK G2.
| Key Features |
|---|
| Privacy screen |
| Compatible with TOUGHBOOK G2 |
Protection & Security
CF-VNC002U
LCD Screen Cleaning Cloth
| Key Features |
|---|
| LCD Screen Cleaning Cloth |
| Microfiber cleaning cloth |
Protection & Security
FZ-VPFS11U
The Protective Film (FZ-VPFS11U) is designed for compatibility with TOUGHBOOK S1.
| Key Features |
|---|
| Protective Film |
| 1 protective film and a spatula in the package |
| Protects the display from scratches |
| User-replaceable |
| Compatible with TOUGHBOOK S1 |
Protection & Security
FZ-VPFA31U
The LCD Protective Film (FZ-VPFA31U) is designed for compatibility with TOUGHBOOK A3.
| Key Features |
|---|
| Protective Film |
| Screen size: 10.1" |
| User-replaceable |
| Protects the display from scratches |
Protection & Security
CF-VPF34U
The LCD Protective Film (CF-VPF34U) is designed for compatibility with TOUGHBOOK 33.
| Key Features |
|---|
| LCD Protective Film for TOUGHBOOK 33 |
| Screen size: 12" |
| User-replaceable |
| Protects the display from scratches |
| Minimum order quantity: 10pcs |
Protection & Security
CF-VPF32U
The LCD Protective Film is designed for compatibility with TOUGHBOOK XZ6.
| Key Features |
|---|
| LCD Protective Film for TOUGHBOOK XZ6 |
| Screen size: 12" |
Protection & Security
FZ-VPFL11U
TOUGHBOOK LCD Protective Film (10 pieces)
| Key Features |
|---|
| LCD Protective Film for TOUGHBOOK L1 & S1 |
| Screen size: 7" |
Protection & Security
FZ-VPFN11U
The LCD Protective Film (FZ-VPFN11U) is designed for compatibility with TOUGHBOOK N1, F1.
| Key Features |
|---|
| LCD Protective Film for TOUGHBOOK N1, F1 |
| Screen size: 4.7" |
| User-replaceable |
| Protects the display from scratches |
| Minimum order quantity: 10pcs |
Protection & Security
PCPE-INFA3TG1
The TOUGHMATE InfoCase Tempered Glass Screen Protector (PCPE-INFA3TG1) is designed for compatibility with TOUGHBOOK A3.
| Key Features |
|---|
| Tempered Glass Screen Protector |
| 9H hardness protects the display glass from scratching |
| Multi-layer construction provides high impact resistance |
| Quick and easy, bubble-free installation |
| Touch and stylus compatible |
Protection & Security
PCPE-INFN1TG1
The TOUGHMATE InfoCase Tempered Glass Screen Protector (PCPE-INFN1TG1) is designed for compatibility with TOUGHBOOK N1.
| Key Features |
|---|
| Tempered Glass Screen Protector |
| 9H hardness protects the display glass from scratching |
| Multi-layer construction provides high impact resistance |
| Quick and easy, bubble-free installation |
| Touch and stylus compatible |
Protection & Security
PCPE-INFS1TG1
The TOUGHMATE InfoCase Tempered Glass Screen Protector (PCPE-INFS1TG1) is designed for compatibility with TOUGHBOOK S1.
| Key Features |
|---|
| Tempered Glass Screen Protector |
| 9H hardness protects the display glass from scratching |
| Multi-layer construction provides high impact resistance |
| Quick and easy, bubble-free installation |
| Touch and stylus compatible |
Affichage 4 de 17
Stylus pen and tether
Stylus Pens & Tethers
FZ-VNPG15U
The FZ-VNPG15U (IP55 Digitiser Pen) is designed for the TOUGHBOOK G1 (mk5).
| Key Features |
|---|
| IP55 Digitiser Pen for TOUGHBOOK G1 (mk5) |
| Ribbed grip for ease of use |
| Features right click & erase buttons |
| Ergonomic digitizer stylus pen |
| Waterproof |
Stylus Pens & Tethers
CF-VNP023U
The IP55 Digitiser Pen (CF-VNP023U) is designed for compatibility with TOUGHBOOK 33 (MK1) and TOUGHBOOK 20.
| Key Features |
|---|
| IP55 Digitiser Pen for TOUGHBOOK 20 (Dual Touch Model), 33 |
| Includes hole for optional tether |
| Features right-click button |
| Waterproof |
Stylus Pens & Tethers
CF-VNP025U
The Capacitive Stylus Pen is designed for compatibility with TOUGHBOOK A3, S1.
| Key Features |
|---|
| Capacitive Stylus Pen for TOUGHBOOK A3, S1 |
| Ergonomic capacitive stylus pen |
| Includes hole for optional tether |
| Minimum order quantity 10pcs |
Stylus Pens & Tethers
CF-VNP021U
The Thin Nib Passive Stylus Pen is designed for compatibility with TOUGHBOOK L1, N1, T1.
| Key Features |
|---|
| Thin Nib Passive Stylus Pen for TOUGHBOOK L1, N1, T1 |
| Ergonomic capacitive stylus pen |
| Includes hole for optional tether |
Stylus Pens & Tethers
FZ-VNPQ11U
FZ-VNPQ11U
| Key Features |
|---|
| Capacitive Stylus Pen for TOUGHBOOK N1 |
Stylus Pens & Tethers
FZ-VNPN11U
TOUGHBOOK N1 Active Stylus Pen
| Key Features |
|---|
| Active Stylus Pen for TOUGHBOOK N1 |
Stylus Pens & Tethers
CF-VNT002U
The Stylus Tether (CF-VNT002U) is designed for compatibility with TOUGHBOOK A3, 33.
| Key Features |
|---|
| Stylus Tether (bungee cable) for TOUGHBOOK A3, 33 |
| Minimum order quantity: 10 pieces |
Stylus Pens & Tethers
FZ-VNTG11U
The Tether (FZ-VNTG11U) is designed to be compatible for TOUGHBOOK G1 model.
| Key Features |
|---|
| Perfect companion for a stylus pen to make sure the pen does not get lost |
| Loops around the hole in the stylus pen and an opening near the stylus holder on the unit |
Stylus Pens & Tethers
FZ-VNTT11U
The Stylus Tether (FZ-VNTT11U) is designed for compatibility with TOUGHBOOK T1, S1.
| Key Features |
|---|
| Stylus Tether for TOUGHBOOK T1, S1 |
| Quantity of 3. |
Stylus Pens & Tethers
PCPE-INFUVA2
The InfoCase Stylus Tether (PCPE-INFUVA2) is designed for compatibility with TOUGHBOOK 55, A3, S1.
| Key Features |
|---|
| InfoCase Stylus Tether |
| Materials: Polyester, steel |
| RoHs compliant |
| Stylus not included |
Stylus Pens & Tethers
FZ-VNP551U
The Capacitive Stylus pen is designed for compatibility with TOUGHBOOK 55 Touch.
| Key Features |
|---|
| Capacitive Stylus Pen for TOUGHBOOK 55 Touch |
| Ergonomic capacitive stylus pen |
| Includes hole for optional tether |
| Minimum order quantity 10pcs |
Stylus Pens & Tethers
FZ-VNP026U
The Stylus Pen (FZ-VNP026U) is designed for compatibility with TOUGHBOOK G2.
| Key Features |
|---|
| IP55 Digitizer Pen |
| Waterproof |
| 2 buttons (right-click & erase) |
| Includes hole for optional tether |
| Minimum order quantity 10pcs |
Stylus Pens & Tethers
PCPE-CDSG2SH
A stylus holder, specially designed for the TOUGHBOOK G2 with slim corner guards, to enable it to hold a stylus. The kit consists of a loop of elasticated fabric, held securely in place by a Polycarbonate attachment which closely matches the textured finish of the back of the G2. The kit can be supplied for retrofitting in the field by the user or it can be specified up front for pre-installation onto the G2. This stylus holder is also compatible with other G2 models.
| Key Features |
|---|
| Designed specifically for the TOUGHBOOK G2 with slim corner guards |
| Compatible with standard G2 Stylus |
| Fully TOUGHBOOK Tested, including 10,000 cycles |
| MOQ: 100 pcs |
Stylus Pens & Tethers
CF-VNP332U
The Digitizer Stylus Pen (CF-VNP332U) is designed for use with touch/digitizer screens, fully compatibility for TOUGHBOOK 33 (mk2).
| Key Features |
|---|
| Ergonomic digitizer stylus pen |
| Waterproof |
| Right-click & erase |
| Includes hole for optional tether |
| Fits in built-in stylus holder on the TOUGHBOOK 33 (mk2) |
Affichage 4 de 14
Miscellaneous accessories
Miscellaneous
PCPE-CDS4BC1/2
The 4-Cup Charging Rack (PCPE-CDS4BC1/2) is compatible for the TOUGHBOOK N1, F1 models.
| Key Features |
|---|
| Rack/wall mountable shelf designed specially to accommodate 4 x TOUGHBOOK N1/F1 charging cups |
| Includes special 4-way AC adaptor |
Miscellaneous
PCPE-FCDVR05
The Slimline External CD/DVD Writer (PCPE-FCDVR05) is compatible for TOUGHBOOK products.
| Key Features |
|---|
| Read and write CD’s and DVD’s any time, any place – ideal notebook accessory |
| 8X DVD Write Speed, 24X CD Write Speed |
| Compact and lightweight – easily fits into laptop bag or backpack |
| USB powered – no need to carry additional AC adapter |
| Compatible with all common CD and DVD formats |
Miscellaneous
PCPE-FCDVR06
The Slimline External Blu-ray Writer (PCPE-FCDVR06) is compatible for Windows products only.
| Key Features |
|---|
| Compact and lightweight external Blu-ray Writer |
| Slim design based on aluminium enclosure |
| Ideally suited for use with a notebook |
| Power provided by the USB port – Via USB Y cable or extra external power supply |
| Includes Nero Burn & Archive software *– easily create your own Blu-ray, DVD or CD archive |
Miscellaneous
FZ-VSD55121U
The 256GB SSD Universal Bay (FZ-VSD55121U) is designed for compatibility with TOUGHBOOK 55.
| Key Features |
|---|
| 256GB SSD for Universal Bay |
| For use with the TOUGHBOOK 55 Universal Bay. |
Miscellaneous
FZ-VSD55151U
The 512GB SSD Universal Bay (FZ-VSD55151U) is designed for compatibility with TOUGHBOOK 55.
| Key Features |
|---|
| 512GB SSD for Universal Bay |
| For use with the TOUGHBOOK 55 Universal Bay. |
Miscellaneous
FZ-VSD551T1U
The 1TB SSD Universal Bay (FZ-VSD551T1U) is designed for compatibility with TOUGHBOOK 55.
| Key Features |
|---|
| 1TB SSD for Universal Bay |
| For use with the TOUGHBOOK 55 Universal Bay. |
Miscellaneous
FZ-VSD55122U
The 256GB OPAL SSD Universal Bay (FZ-VSD55122U) is designed for compatibility with TOUGHBOOK 55.
| Key Features |
|---|
| 256GB OPAL SSD for Universal Bay |
| For use with the TOUGHBOOK 55 Universal Bay |
Miscellaneous
FZ-VSD55152U
The 512GB OPAL SSD Universal Bay (FZ-VSD55152U) is designed for compatibility with TOUGHBOOK 55.
| Key Features |
|---|
| 512GB OPAL SSD for Universal Bay |
| For use with the TOUGHBOOK 55 Universal Bay. |
Miscellaneous
FZ-VSD551T2U
The 1TB OPAL SSD Universal Bay (FZ-VSD55122U) is designed for compatibility with TOUGHBOOK 55.
| Key Features |
|---|
| 1TB OPAL SSD for Universal Bay |
| For use with the TOUGHBOOK 55 Universal Bay |
Miscellaneous
FZ-VDM551U
The DVD Multi Drive for Universal Bay (FZ-VDM551U) is designed for compatibility for TOUGHBOOK 55.
| Key Features |
|---|
| DVD Multi Drive for Universal Bay |
| Supports Disc Reading: DVD-ROM, DVD-Video, DVD-R, DVD-R DL, DVD-RW, DVD-RAM |
| Supports Disc Writing: DVD-R, DVD-R DL, DVD-RW, DVD-RAM |
Miscellaneous
FZ-VBD551U
The Blu-Ray Disc Drive Universal Bay (FZ-VBD551U) is designed for compatibility with TOUGHBOOK 55.
| Key Features |
|---|
| Blu-Ray Disc Drive for Universal Bay |
| Supports Disc Reading: BD-ROM, UHD BD-ROM,BD-R SL/DL, BD-R TL/QL, BD-RE SL/DL, BD-RE TL, DVD-ROM, DVD-Video, DVD-R, DVD-R DL, DVD-RW, DVD-RAM |
| Supports Disc Writing: BD-R, BD-RE, DVD-R, DVD-R DL, DVD-RW, DVD-RAM |
Miscellaneous
FZ-VGT551U
The Discrete GPU (AMD Radeon Pro WX 4150) Universal Bay (FZ-VGT551U) is compatible for TOUGHBOOK 55.
| Key Features |
|---|
| Discrete GPU (AMD Radeon Pro WX 4150) for Universal Bay |
| 4GB GDDR5 Memory |
| Supports DirectX 12, OpenGL 4.5 and OpenCL 2.0 |
Miscellaneous
FZ-VSC552U
The Smart Card Reader for Universal Bay (FZ-VSC552U) is compatible for all TOUGHBOOK 55 models.
| Key Features |
|---|
| Smart Card Reader for Universal Bay |
| Support ISO 7816 Class A, B and C cards (5 V, 3 VSupport ISO 7816 Class A, B and C cards (5 V, 3 V, 1.8 V) up to 826 Kbps(depend on card) 1.8 V) up to 826 Kbps (depend on card) |
| Reads from and writes to all ISO 7816-1,2,3,4 microprocessor cards, T=0 and T=1 protocols |
Miscellaneous
FZ-VSC551U
The Smart Card Reader for Universal Bay (FZ-VSC551U) is compatible for all TOUGHBOOK 55 models.
| Key Features |
|---|
| Smart Card Reader for Universal Bay |
| Support ISO 7816 Class A, B and C cards (5 V, 3 V, 1.8 V) up to 826 Kbps (depend on card) |
| Reads from and writes to all ISO 7816-1,2,3,4 microprocessor cards, T=0 and T=1 protocols |
Miscellaneous
FZ-VNF551U
Contactless Smart Card Reader (HF-RFID) for Front Expansion Slot (FZ-VNF551U) is compatible for all TOUGHBOOK 55 models.
| Key Features |
|---|
| Contactless Smart Card Reader (HF-RFID) for Front Expansion Slot |
| Support ISO 14443 TypeA/B,Mifare |
Miscellaneous
FZ-VPF551U
The Finger Print Reader for Front Expansion Slot (FZ-VPF551U) is compatible for all TOUGHBOOK 55 models.
| Key Features |
|---|
| Finger Print Reader for Front Expansion Slot |
| Capacitive Technology |
| 363dpi Resolution |
| Image Size: 7.4 x 6.0 mm |
Miscellaneous
FZ-BAZ1908
The 8GB RAM Module (FZ-BAZ1908) is designed for compatibility with TOUGHBOOK 55 (mk1).
| Key Features |
|---|
| 8GB RAM Module |
Miscellaneous
FZ-BAZ1916
The 16GB RAM Module (FZ-BAZ1916) is designed for compatibility with TOUGHBOOK 55.
| Key Features |
|---|
| 16GB RAM Module |
Miscellaneous
PCPE-PGLCHR1/R2
The Charging Cradle for Standard or Mid Range 1D/2D Barcode Scanner (PCPE-PGLCHR1/R2) is designed to be compatible with PCPE-PGLSCN1/SCN2.
| Key Features |
|---|
| Charging station for Standard and Mid Range 1D& 2D Barcode Scanner |
| 2 hours charging time |
| Optical and acoustic feedback on charge status |
Miscellaneous
PCPE-MODBAT1
The batteries (PCPE-MODBAT1) are designed to work specifically with the PCPE-MODBTH1 Bluetooth headset, which is designed to be compatible for the TOUGHBOOK G2 tablet.
| Key Features |
|---|
| Replaceable batteries for PCPE-MODBTH1 Bluetooth headset |
| Pack contains 25 batteries packs |
Miscellaneous
FZ-VSCG211U
The Smart Card Reader for Rear Expansion Bay (FZ-VSCG211U) is compatible for all TOUGHBOOK G2 models.
| Key Features |
|---|
| Smart Card Reader for TOUGHBOOK G2 Rear Expansion Bay |
| Support ISO 7816 Class A, B and C cards (5 V, 3 V, 1.8 V) up to 826 Kbps (depend on card) |
| Reads from and writes to all ISO 7816-1,2,3,4 microprocessor cards, T=0 and T=1 protocols |
Miscellaneous
FZ-VRFG211U
The Contactless Smart Card Reader (HF-RFID) for Rear Expansion Bay (FZ-VRFG211U) is compatible for all TOUGHBOOK G2 models.
| Key Features |
|---|
| Contactless Smart Card Reader (HF-RFID) for TOUGHBOOK G2 Rear Expansion Bay |
| Support ISO 14443 TypeA/B,Mifare |
Miscellaneous
FZ-VCN551U
The User Configurable I/O (FZ-VCN551U) is compatible for all TOUGHBOOK 55 models.
| Key Features |
|---|
| VGA x1, Serial x1, USB3.0 x1 for rear Expansion Slot |
Miscellaneous
FZ-VCN552U
The User Configurable I/O (FZ-VCN552U) is compatible for all TOUGHBOOK 55 models.
| Key Features |
|---|
| VGA x1, Serial x1, 2nd Gigabit LAN x1 for rear Expansion Slot |
Miscellaneous
FZ-VCN553U
The User Configurable I/O (FZ-VCN553U) is compatible for all TOUGHBOOK 55 models.
| Key Features |
|---|
| VGA x1, Serial x1, Rugged USB x1(USB2.0) for rear Expansion Slot |
Miscellaneous
FZ-BAZ2008
The 8GB RAM Module (FZ-BAZ2008) is designed for compatible with TOUGHBOOK 55 (mk2).
| Key Features |
|---|
| 8GB RAM Module |
Miscellaneous
FZ-BAZ2016
The 16GB Memory module (FZ-BAZ2016) is designed for compatibility with TOUGHBOOK 55 (mk2).
| Key Features |
|---|
| 16GB RAM Module |
| User-upgradeable, allowing users to easily install or replace the module themselves |
| Can be installed in either one or both memory slots |
Miscellaneous
FZ-BAZ2032
The 32GB Memory module (FZ-BAZ2032) is designed for compatibility with TOUGHBOOK 55 (MK2).
| Key Features |
|---|
| 32GB RAM Module |
| User-upgradeable, allowing users to easily install or replace the module themselves |
| Can be installed in either one or both memory slots |
Miscellaneous
FZ-VBRG211U
1D/2D Barcode Reader for Configuration Port (FZ-VBRG211U) is compatible for all TOUGHBOOK G2 models.
| Key Features |
|---|
| 1D/2D Barcode Reader for Configuration Port |
| User-replaceable |
| Includes screws |
| Compatible with TOUGHBOOK G2 Configuration Port |
Miscellaneous
FZ-VUBG211U
The USB 2.0 for Configuration Port (FZ-VUBG211U) is compatible for all TOUGHBOOK G2 models.
| Key Features |
|---|
| USB 2.0 for Configuration Port |
| User-replaceable |
| Includes screws |
| Compatible with TOUGHBOOK G2 Configuration Port |
Miscellaneous
FZ-VLNG211U
The Gigabit LAN for Configuration Port (FZ-VLNG211U) is compatible for all TOUGHBOOK G2 models.
| Key Features |
|---|
| Gigabit LAN for Configuration Port |
| User-replaceable |
| Includes screws |
| Compatible with TOUGHBOOK G2 Configuration Port |
Miscellaneous
FZ-VSRG211U
The True Serial for Configuration Port (FZ-VSRG211U) is compatible for all TOUGHBOOK G2 models.
| Key Features |
|---|
| True Serial for Configuration Port |
| User-replaceable |
| Includes screws |
| Compatible with TOUGHBOOK G2 Configuration Port |
Miscellaneous
FZ-VTSG211U
The Thermal Camera for Configuration Port (FZ-VTSG211U) is compatible for all TOUGHBOOK G2 models.
| Key Features |
|---|
| Thermal Camera for Configuration Port |
| FLIR Lepton 3.5 thermal camera |
| User-replaceable |
| Includes screws |
| Compatible with TOUGHBOOK G2 Configuration Port |
Miscellaneous
FZ-VNP401U
The Capacitive Stylus Pen (FZ-VNP401U) is compatible for the TOUGHBOOK 40 model.
| Key Features |
|---|
| Capacitive Stylus Pen |
| Compatible with TOUGHBOOK 40 |
Miscellaneous
FZ-VPF39U
The 14.0" Screen Protector (FZ-VPF39U) is designed to be compatible for TOUGHBOOK 40.
| Key Features |
|---|
| 14.0" Screen Protector for FZ-40. Features anti-reflective (AR) screen treatment. |
| Compatible with TOUGHBOOK 40 |
Miscellaneous
PCPE-KENLOK1
The Kensington Lock (PCPE-KENLOK1) is designed for compatible with TOUGHBOOK G2.
| Key Features |
|---|
| Super-strong, steel composite cable with carbon tempered steel core |
| Built-in tamper evident feature to detect unauthorised use |
| Patented T-bar lock provides superior lock strength and theft protection |
| Easy to install and use in the office or when travelling |
| Sleek styling and design won’t block notebook ports or lift a notebook off the desk |
Miscellaneous
FZ-BAZ1932
The 32GB RAM Module (FZ-BAZ1932) is designed for compativility with TOUGHBOOK 55 (mk1).
| Key Features |
|---|
| 32GB RAM Module |
| User-upgradeable |
| Can go in either (or both) memory slots |
Miscellaneous
FZ-VSDR5551W
The 1st SSD 512GB (FZ-VSDR5551W) is designed for compatibility with TOUGHBOOK 55 (mk1).
| Key Features |
|---|
| User-replaceable - can easily be removed using quick-release lever or can be securely locked down using optional locking screw (FZ-VSW551U includes set of 14 screws) |
| Features protective cage to reduce chance of damaging the drive itself |
| Compact M.2 form factor, SATA connector |
| Located on bottom of TOUGHBOOK 55 |
Miscellaneous
FZ-VSDR55T1W
The 1st SSD 1TB (FZ-VSDR55T1W) is designed for compatibility with TOUGHBOOK 55 (mk1).
| Key Features |
|---|
| User-replaceable - can easily be removed using quick-release lever or can be securely locked down using optional locking screw (FZ-VSW551U includes set of 14 screws) |
| Features protective cage to reduce chance of damaging the drive itself |
| Compact M.2 form factor, SATA connector |
| Located on bottom of TOUGHBOOK 55 |
Miscellaneous
FZ-VSDR5552W
The 1st Opal SSD 512GB (SATA) (FZ-VSDR5551W) is designed for compatibility with TOUGHBOOK 55 (mk1).
| Key Features |
|---|
| User-replaceable - can easily be removed using quick-release lever or can be securely locked down using optional locking screw (FZ-VSW551U includes set of 14 screws) |
| Features protective cage to reduce chance of damaging the drive itself |
| Compact M.2 form factor, SATA connector |
| Hardware encryption can be activated (by default it is turned off) |
| Located on bottom of TOUGHBOOK 55 |
Miscellaneous
FZ-VSDR55N5W
The 1st Opal SSD 512GB (NVMe) (FZ-VSDR55N5W) is designed for compatibility with TOUGHBOOK 55 (mk2).
| Key Features |
|---|
| User-replaceable - can easily be removed using quick-release lever or can be securely locked down using optional locking screw (FZ-VSW551U includes set of 14 screws) |
| Features protective cage to reduce chance of damaging the drive itself |
| Compact M.2 form factor, fast NVMe connector |
| Hardware encryption can be activated (by default it is turned off) |
| Compatible with mk2 only |
Miscellaneous
FZ-VSDR55NTW
The 1st Opal SSD 1TB (NVMe) (FZ-VSDR55NTW) is designed for compatibility with TOUGHBOOK 55 (mk2).
| Key Features |
|---|
| User-replaceable - can easily be removed using quick-release lever or can be securely locked down using optional locking screw (FZ-VSW551U includes set of 14 screws) |
| Features protective cage to reduce chance of damaging the drive itself |
| Compact M.2 form factor, fast NVMe connector |
| Hardware encryption can be activated (by default it is turned off) |
| Compatible with mk2 only |
Miscellaneous
FZ-VSDG25121
The 512GB Opal SSD Pack (FZ-VSDG25121) is designed for compatibility with TOUGHBOOK G2 Quick Release SSD.
| Key Features |
|---|
| User-replaceable -- can easily be removed using quick-release lever or can be securely locked down using optional locking screw |
| Features protective cage to reduce chance of damaging the drive itself |
| Includes hardware encryption (off by default) |
| Fast NVMe connector & ompact M.2 form factor |
| Located in rear of TOUGHBOOK G2 |
Miscellaneous
FZ-VSDG21T21
The 1TB Opal SSD Pack (FZ-VSDG21T21) is designed for compatibility with TOUGHBOOK G2 Quick Release SSD.
| Key Features |
|---|
| User-replaceable -- can easily be removed using quick-release lever or can be securely locked down using optional locking screw |
| Features protective cage to reduce chance of damaging the drive itself |
| Includes hardware encryption (off by default) |
| Fast NVMe connector & ompact M.2 form factor |
| Located in rear of TOUGHBOOK G2 |
Miscellaneous
FZ-VSD400T1U
The 1st Opal SSD 512GB (FZ-VSD400T1U) is designed for compatibility with TOUGHBOOK 40.
| Key Features |
|---|
| User-replaceable - can easily be removed using quick-release lever or can be securely locked down using optional locking screw |
| Features protective cage to reduce chance of damaging the drive itself |
| Compact M.2 form factor, fast NVMe connector |
| FIPS 140-2 hardware encryption can be activated (by default it is turned off) |
Miscellaneous
FZ-VSD401T1U
The 1st Opal SSD 1TB (FZ-VSD401T1U) is designed for compatibility with TOUGHBOOK 40.
| Key Features |
|---|
| User-replaceable - can easily be removed using quick-release lever or can be securely locked down using optional locking screw |
| Features protective cage to reduce chance of damaging the drive itself |
| Compact M.2 form factor, fast NVMe connector |
| FIPS 140-2 hardware encryption can be activated (by default it is turned off) |
Miscellaneous
FZ-VSD402T1U
The 1st Opal SSD 2TB (FZ-VSD402T1U) is designed for compatibility with TOUGHBOOK 40.
| Key Features |
|---|
| User-replaceable - can easily be removed using quick-release lever or can be securely locked down using optional locking screw |
| Features protective cage to reduce chance of damaging the drive itself |
| Compact M.2 form factor, fast NVMe connector |
| FIPS 140-2 hardware encryption can be activated (by default it is turned off) |
Affichage 4 de 47
Partager la page
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: