Compacte Solid Shine laserprojector met 12.000 lumen

PT-RZ12K

Discontinued

Ontworpen voor langdurige stabiele helderheid voor evenementen en voorstellingen. _x000D_ 3-chip DLP-projector met laserlichtbron, 12.000 lumen en WUXGA.

Volledige specificaties Pagina delen

Key features of PT-RZ12K

Belangrijkste kenmerken

3-chip DLP-laserprojector, 12.000 lumen, WUXGA

Hoge beeldsnelheid van 120Hz voor uitstekende en scherpe bewegende beelden

Laserprojectie zonder lampen en stofbestendig vloeistofkoelsysteem voor 20.000 uur onderhoudsvrije werking

Contrastverhouding van 20.000:1

Real-motionprocessor combineert het maken en het verwerken van frames bij 120 Hz voor vloeiende bewegingsreductie
Indrukwekkende helderheid van 12.000 lm
's Werelds lichtste 3-chip DLP™-projector van 45 kg (vanaf juni 2015)
Dynamisch contrast zorgt voor contrastverhouding van 20.000:1^*1 door laserlicht te regelen
Nieuwste generatie Detail Clarity Processor levert natuurlijke texturen tot de fijnste details
System Daylight View 3 voor verbeterde kleurwaarneming in fel verlichte ruimtes en kaarttoepassingen.
DICOM-simulatiemodus voor medische presentaties en trainingen*2
Rec. 709-modus reproduceert kleuren nauwkeurig voor HDTV-projectie

Meer tonen Show less

Lagere exploitatiekosten, hogere betrouwbaarheid

Lichtbron met extreem lange levensduur van 20.000 uur^*3
Nieuw vloeistofkoelsysteem zorgt voor stille werking
Stabiele werking bij omgevingstemperaturen tot 45 °C^*4
Consistente kleurweergave zonder verslechtering van de beeldkwaliteit op de lange termijn
Dankzij laserlichtbron is 24/7-gebruik mogelijk
Stofdicht optisch blok
Breed lensverschuivingsbereik

360-graden installatieflexibiliteit

360-graden verticale, horizontale en tilt-projectie mogelijk dankzij laserlichtbron
Multi-Screen Support-systeem voor naadloos aansluitende projectiebeelden met randovervloeiing, kleuraanpassing en digitale beeldvergroting.
Geometrische aanpassing voor projectie op kromme of gebogen oppervlakken
Compatibel met kit voor automatische schermaanpassing ET-CUK10^*5
Helderheidsregeling voor meerdere schermen
Compatibel met meervoudige bewakings- en besturingssoftware van Panasonic en Early Warning-software.
Via DIGITAL LINK-aansluiting met één kabel kunnen video- en besturingssignalen over afstanden tot 100 m worden overgedragen
Compatibel met verlichtingsregelingsprotocol Art-Net DMX
Ruime aansluitmogelijkheden waaronder 3G-SDI, DIGITAL LINK, DVI-D en HDMI
Deelt gemeenschappelijke lenzen (inclusief de ET-D75LE90 ultra-short-throw-lens) met 3-chip DLP™-projectorserie van Panasonic.

^{*1 Volledig aan/uit, met dynamisch contrast ingesteld op “3”, *2 Dit product is geen medisch instrument. Niet gebruiken voor werkelijke medische diagnose, *3 Gebruiksomgeving is mogelijk van invloed op levensduur van de lichtbron, *4 Lichtopbrengst kan lager zijn om de projector te beschermen afhankelijk van omgevingsomstandigheden, *5 ET-CUK10 is beschikbaar voor gebruik over de hele wereld, behalve in de Verenigde Staten. Verkrijgbaarheid varieert per land}

Projector type	3-Chip DLP^TMprojector
Display method	DLP^TM chip x 3, DLP^TM projection system
Display Device -> Panel size	PT-RZ12K : 24.4 mm (0.96˝) diagonal (16:10 aspect ratio) PT-RS11K : 24.1 mm (0.95˝) diagonal (4:3 aspect ratio)
Display Device -> Number of pixels	PT-RZ12K : 2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels PT-RS11K : 1,470,000 (1400 x 1050) x 3, total of 4,410,000 pixels
Light source	Laser diode (Class 1)
Light output	12,000 lm
Time until light output declines to 50 % -> NORMAL	20,000 hours [NORMAL]
Time until light output declines to 50 % -> ECO	24,000 hours [ECO]

Projector type	3-Chip DLP^TMprojector
Display method	DLP^TM chip x 3, DLP^TM projection system
Display Device -> Panel size	PT-RZ12K : 24.4 mm (0.96˝) diagonal (16:10 aspect ratio) PT-RS11K : 24.1 mm (0.95˝) diagonal (4:3 aspect ratio)
Display Device -> Number of pixels	PT-RZ12K : 2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels PT-RS11K : 1,470,000 (1400 x 1050) x 3, total of 4,410,000 pixels
Light source	Laser diode (Class 1)
Light output	12,000 lm
Time until light output declines to 50 % -> NORMAL	20,000 hours [NORMAL]
Time until light output declines to 50 % -> ECO	24,000 hours [ECO]
Time until light output declines to 50 % -> QUIET	20,000 hours [QUIET]
Resolution	PT-RZ12K : 1920 x 1200 pixels PT-RS11K : 1400 x 1050 pixels
Contrast Ratio (typ.)	20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Screen size (diagonal)	1.78–25.4 m (70–1,000˝), 1.78–15.24 m (70–600˝) with the ET-D75LE8, 3.05-15.24 m (120–600˝) with the ET-D75LE90, 16:10 aspect ratio 1.78–25.4 m (70–1,000˝), 1.78–15.24 m (70–600˝) with the ET-D75LE8, 3.05–15.24 m (120–600˝) with the ET-D75LE90, 4:3 aspect ratio
Refresh rate	120 Hz*3
Lens	Optional powered zoom and fixed-focus lenses
Lens shift -> Vertical(from center of screen)	±55 % (±44 % with the ET-D75LE6, +73 – +78 % with the ET-D75LE90) (powered) ±50 % (±40 % with the ET-D75LE6, +71 % with the ET-D75LE90) (powered)
Lens shift -> Horizontal(from center of screen)	±20 % (±15 % with the ET-D75LE6, ±6 % with the ET-D75LE90) (powered) ±30 % (±20 % with the ET-D75LE6) (powered)*8
Keystone correction range	Vertical: ±40° (±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±15° (0° with ET-D75LE90)
Keystone correction range with optionalET-UK20 Upgrade Kit^*6	Vertical: ±45° (±40° with ET-D75LE10/ET-D75LE20, ±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±40° (±15° with ET-D75LE50/ET-D75LE6, 0° with ET-D75LE90)
Installation	Ceiling/floor, front /rear, free 360-degree installation
Power supply	100–240 V AC, 50/60 Hz
Maximum power consumption	1,200 W (1,280 VA) Average power consumption: 800 W (Normal Mode), 680 W (Eco Mode), 620 W (Long Life 1 Mode), 590 W (Long Life 2 Mode), 550 W (Long Life 3 Mode)
Standby power consumption -> Normal	4 W [NORMAL]
Standby power consumption -> ECO	0.3 W [ECO]^*2
Cabinet materials	Molded plastic
Filter	No
Operation noise -> Normal	43 dB [NORMAL]
Dimensions (W x H x D)	578 x 270 x 725 mm (22 3/4˝ x 10 5/8˝ x 28 17/32˝) (optional lens, legs and lens cover not included), 578 x 323.5 x 740 mm (22 3/4˝ x 12 23/32˝ x 29 1/8˝) (Including legs at shortest position and protruding parts)
Dimensions (W x H x D) -> Width (not including protruding parts)	578 mm (22 3/4˝)
Dimensions -> Width (including protruding parts)	578 mm (22 3/4˝)
Dimensions -> Height (not including protruding parts)	270 mm (10 5/8˝)
Dimensions -> Height (including protruding parts)	323.5 mm (12 23/32˝)
Dimensions -> Depth (not including protruding parts)	725 mm (28 17/32˝)
Dimensions -> Depth (including lens)	740 mm (29 1/8˝)
Weight	Approx. 44.0 kg (97 lbs) (optional lens not included)
Operating environment -> Operating temperature	0–50 °C (32–122 °F)
Operating Environment -> Operating humidity (No condensation)	10–80 % (no condensation)
Applicable software	Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Kit)
Footnote Description	Operating temperature: 25 °C (77 °F), altitude: 700 m (22 ft 12 in), ICE627087: 2008 Broadcast Content, Image Mode: Dynamic, Dynamic Contrast Mode: 3. When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal. Refresh rate varies depending on scanning frequency. At this time the brightness will have decreased to approximately half of its original level. Operating Temperature: 35 °C (95 °F), Altitude 700 m (22 ft 12 in), Dust: 0.15 mg/m3. Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. Input signals that exceed the native resolution will be converted to the native resolution. Optical axis shift function cannot be operated when used with the ET-D75LE50. Range varies depending on mounted lens. Average value. May differ depending on the actual unit. When operational mode is set to Normal, operating temperature is from 0 °C (32 °F) to 50 °C (122 °F), and operating temperature is from 0 °C (32 °F) to 45 °C, (113 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) above sea level. When operational mode is set to Eco or Long Life 1/2/3, operating temperature is from 0 °C (32 °F) to 45 °C (113 °F). When used with Smoke Cut Filter, operating temperature is from 0 °C (32 °F) to 40 °C (104 °F). Projector cannot be used in locations over 2,700 m (8,858 ft) with operational mode set to Eco or Long Life 1/2/3. When used with Smoke Cut Filter, the projector cannot be used in locations over 1,400 m (4,593 ft). Light source brightness may decrease depending on operating temperature. When projector is operating at high temperature, brightness will decrease correspondingly.

Compacte Solid Shine laserprojector met 12.000 lumen

PT-RZ12K

Key features of PT-RZ12K

Belangrijkste kenmerken

Lagere exploitatiekosten, hogere betrouwbaarheid

360-graden installatieflexibiliteit

Product galerij

Specifications of PT-RZ12K

Tabel specificaties

Gerelateerde bronnen