PT-REQ80

_{1 With Quad Pixel Drive [ON].
2 Measurement, measuring conditions, and notation method all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
3 Average light output value of all shipped products measured at the center of the screen in NORMAL Mode.
4 Maximum physical resolution with Quad Pixel Drive [ON].
5 Only when the optional TY-SB01DL DIGITAL LINK Terminal Board is loaded.
6 Supports input signals up to 1080p. The display frame rate corresponds to the input signal frame rate.
7 Value is approximate. May vary depending on the input signal, peripheral devices, and other conditions.
8 The optional ET-SWR10 Software Development Kit (SDK) is used with third-party devices (sold separately). Compatibility with third-party devices cannot be guaranteed, and other limitations apply. For more information, please visit the ET-SWR10 webpage.
9 Maximum light output may decrease in the following situations: when a function board is installed in the slot, when voltage drops below AC 100 V, when the light source has deteriorated from use, or when dust has accumulated on the optical parts.
10 ET-FMP50 Series media processors are sold separately. For more information, please visit the ET-FMP50 Series webpage.
11 Optional proprietary and third-party function boards are sold separately. Panasonic cannot guarantee the operation of third-party devices.
12 The Dust Protected performance of this unit is not guaranteed to be free from damage or failure under all conditions (environment with conductive dust, etc.). Please use an enclosure in environments with smoke containing oil, salt, and moisture.
13 Around this time, the light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, NORMAL Mode, Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700m (2,297 ft) with 0.15 mg/m³ of airborne particulate matter. Panasonic recommends a checkup at the point of purchase after about 20,000 hours. Light-source lifetime may be reduced depending on the environmental conditions. Replacement of parts other than the light source may be required in a shorter period. Estimated maintenance time varies depending on the environment.}

Smooth and Dimensional 4K Video

Quad Pixel Drive produces smooth 4K¹ images with a fascinating sense of depth. It meets the demand for absolute realism in immersive production spaces by creating detailed 4K¹ images without visible pixels or gridding, even when viewed up close. Captivate your guests with an engaging visual experience that illuminates the creator’s world and elevates your storytelling.

_{1 With Quad Pixel Drive [ON].}

Delivers Up to 15,000 lm Brightness on AC 100–240 V

The REQ15 Series delivers full brightness up to 15,000 lm¹ on AC 100–240 V power², reducing the need to rewire the venue for high-voltage power and saving time, cost, and resources.

_{1 For the PT-REQ15 only. Please refer to the specifications for the maximum brightness of other models in the series. Measurement, measuring conditions, and notation method all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped.
2 Maximum light output may decrease in the following situations: when voltage drops below AC 100 V, when a function board is installed in the slot, when the light source has deteriorated from use, or when dust has accumulated on the optical parts.}

Light, Compact, and Whisper-Quiet

With a compact body that blends unobtrusively into your spatial design, REQ15 Series projectors save resources and carbon footprint in transport and storage. They can be easily carried and installed with two people, smoothing multi-projection logistics. Furthermore, the high-efficiency liquid cooling system reduces operating noise to as little as 32 dB¹, ensuring your audience stays focused on the experience and not the equipment creating it.

_{1 For the PT-REQ80 in QUIET Mode. Please see the specifications for more information.}

Works with an All-New Lens Lineup

REQ15 Series works with new optional motor-driven fixed, zoom, and ultra-short-throw zoom lenses, making it possible to deliver immersive experiences in spaces of any size. The lenses improve native contrast, minimize flare and color blur, and have a wider lens shift range than previous designs. Lens Memory and Auto Lens Identification functions are included, and for the first time, powered periphery focus adjustment¹ is now supported via remote control or the Smart Projector Control² app.

_{1 Excluding ET-C1S600 and ET-C1T700 lenses.
2 Available free from the App Store or the Google Play store. Check device and OS compatibility before downloading and installing the app.
Note: ET-C1S600 is equivalent to the supplied lens (availability may vary by country or region). Models with an "L" designation ship without a lens. PT-REQ15 Series is compatible with C1 Series lenses only.}

Supports New Media Processors to Simplify Multi-Projection

REQ15 Series works with Panasonic’s ET-FMP50 Series media processors to simplify multi-projection complexity. The processors, which comprise box-type and function board-type for the projector's Intel^® SDM standard-compatible SLOT, feature automatic warping/blending and media playback capabilities. For more information, please click here.