Products

Featuressmart-factory-solutions software panacim-logo-02PanaCIM-EE Gen2 is the next generation of PanaCIM-EE, which allows for more efficient electronics manufacturing. This digital planning tool is necessary to enable reliable data management. This applies not only to individual systems, but to entire production lines, in which the data of each individual machine is included in the analysis. In addition, data from reports and management are included in the planning. This allows higher production rates and shorter cycle times to be achieved to make electronics production even more efficient and reliable. The PanaCIM-EE Gen2 is the next generation of a smart factory solution, connecting the shop floor with overall the management system. This includes precise inventory management, maximized factory performance based on a continuous production, total traceability, real time monitoring and optimization and an accurate in-time material supply. Material verificationMaterial controlTraceabilityProduction monitoring/dispatchProduction analysisMaintenanceEnterprise link

The NPM-VF is equipped with a double portal. The SMD and THT components are placed by one placement head per portal. A wide variety of vacuum pipettes and grippers are available. The pick and place machine can be used in single or dual lane mode. The NPM-VF reaches a speed of up to 4,500cph and can process component sizes from 5x5mm up to 130x35mm and 60mm height. Active cutting and clinching tools are integrated which detach THT components from the radial and axial feeders. Clinching directions as well as pin lengths per THT component can be defined via the assembly program. Beside the radial and axial feeders, the NPM-VF can be equipped with all common standard feeder systems for SMD components. The flexible NPM-VF is an ideal machine for cycle-optimized production, especially for companies that must process both types of components due to the increased demand from power electronics for THT assemblies. This efficient pick and place machine contributes to reduce manpower requirements and to consistent production with high productivity, flexibility and high-quality pick and place results.

The NPM-DX provides a greater line throughput, better quality and lower production cost featuring an autonomous line control, which guaranties a stable operation based on automatic functionality. This functionality in combination with the machine set up offers a labor-saving production with improved utilization. In combination with the Panasonic software environment and embedded into an Industry 4.0 philosophy, the user can expect a modern shop floor management system including various remote operation options, feeder setup navigation, component supply navigation etc. In total, the NPM-DX reduces downtimes and increase the line throughput. With 92 400 cph and a feeder capacity for up to 136 reels, the NPM-DX is the ideal solution to meet the expectation of an evolving electronics assembly industry. The NPM-DX can process PCB sizes of up to 510 x 590 mm and place large connectors (up to 150 x 25mm) and other components (up to 120 x 90mm). This and other features make the NPM-DX the best solution for high volume-mix manufacturing.

The AM100 meets the high standards of reliability, capacity and flexibility that customers look forward to in a cost-efficient, gradationally scalable, high-mix SMT solution. It only takes one machine to start off production and extra units and/or technologies can be easily integrated according to requirements. The single-head (single beam) of Panasonic's AM100 modular placement machine is able to place an impressive component array including: 0402 mm to 120 x 90 x 2 8mm, odd-shaped components, large connectors, as well as advanced packaging types e.g.Features The single solution AM100 provides high net productivity and versatility. Equipped with a 14-nozzle head and 160 feeders the AM100 can place an impressive component range. On top the non-stop changeover allows you to prepare the next product process during running production. An off-line setup support station and a feeder set-up navigator option improves operating time and minimizes the downtime.

Supplied with a 40 or 80 component feeder with optional jumper wire, the compact supply unit configuration of the AV132 can fit both ammo pack and reel. The dual partition configuration enables a fast changeover. The next job can be set up while the current one is being processed.Capable of inserting components in four directions: 0°, 90°, 180°, and 270°, the AV132 optimizes productivity by simultaneously handling 26 and 52mm taped components and providing fast, full auto-recovery. The AV132 can reduce loading times by running two PCBs simultaneously, enabling efficient production due to a speed of 0.12s/component and a transfer speed of 2s/PCB.The fixed feeder unit and the out-of-component detection feature allow to replenish components while maintaining long-term non-stop runs.Preparation in advance or equipment operation during component change-over is possible.

Deliver Spectacular Images at Short Distance with New Zero-Offset Lenses

Deliver Spectacular Images at Short Distance with New Zero-Offset Lenses 

Designed to measure aspherical lenses & molds, freeform optics, mirrors and any other precision component requiring nanometer level accuracy.

Fisheye lens for 3-Chip DLP projectors perfect for dome and planetarium projection

4.94-7.94:1 for PT-RQ32K/RQ22K (16:10 aspect ratio) 4.61-7.41:1 for PT-RZ31K/RZ21K (16:10 aspect ratio) 4.99-8.02:1 for PT-RS30K/RS20K (4:3 aspect ratio)

The LIND Car charger 90W (9 to 34VDC) (CF-LND1272BW) is designed for compatibility with TOUGHBOOK 55, G2 (via vehicle dock), A3.

The rental frames are sturdy, strong and visually appealing. In addition, they offer a horizontal and vertical adjustment feature for the ideal projector position.