Panasonic Factory Solutions Europe

The NPM-VF is equipped with a double portal. The SMD and THT components are placed by one placement head per portal. A wide variety of vacuum pipettes and grippers are available. The pick and place machine can be used in single or dual lane mode. The NPM-VF reaches a speed of up to 4,500cph and can process component sizes from 5x5mm up to 130x35mm and 60mm height. Active cutting and clinching tools are integrated which detach THT components from the radial and axial feeders. Clinching directions as well as pin lengths per THT component can be defined via the assembly program. Beside the radial and axial feeders, the NPM-VF can be equipped with all common standard feeder systems for SMD components. The flexible NPM-VF is an ideal machine for cycle-optimized production, especially for companies that must process both types of components due to the increased demand from power electronics for THT assemblies. This efficient pick and place machine contributes to reduce manpower requirements and to consistent production with high productivity, flexibility and high-quality pick and place results.

Higher productivity and quality thanks to the integration of printing, placement and inspection processes make the NPM-W2 one of the most flexible and versatile pick-and-place solutions on the market.

This machine provides the user with a tool that allows him to choose between high speed or high accuracy, depending on the PCB requirements.

In addition, the NPM-W2 is optimised for larger boards and larger components, such as PCBs up to 750 x 550 mm and components up to 150 x 25 x 30 mm (L,W,H). For high productivity, dual lanes can be used.

Features

The multifunctional NPM-W2 is equipped with a 16-nozzle head and can place 42,000 components. 120 feeders can be mounted.

Additionally, the NPM-W2 can automatically inspect solder depots and components according to the production data.

As a third function, the NPM can be fitted with the conventional HDF discharge mechanism, which ensures high-quality non-contact dispensing with a screw valve-dispenser.

The NPM-DX provides a greater line throughput, better quality and lower production cost featuring an autonomous line control, which guaranties a stable operation based on automatic functionality. This functionality in combination with the machine set up offers a labor-saving production with improved utilization. In combination with the Panasonic software environment and embedded into an Industry 4.0 philosophy, the user can expect a modern shop floor management system including various remote operation options, feeder setup navigation, component supply navigation etc. In total, the NPM-DX reduces downtimes and increase the line throughput. With 92 400 cph and a feeder capacity for up to 136 reels, the NPM-DX is the ideal solution to meet the expectation of an evolving electronics assembly industry. The NPM-DX can process PCB sizes of up to 510 x 590 mm and place large connectors (up to 150 x 25mm) and other components (up to 120 x 90mm). This and other features make the NPM-DX the best solution for high volume-mix manufacturing.

The NPM-WX  represents the  next  generation  of  Panasonic’s  mounting  production  concept “Smart manufacturing”. The platform represents higher  line  throughput  and  improved  quality  at  lower cost  thanks  to  integrated  automated  systems.  APC  system  and  automatic  recovery  are  integrated  to provide autonomous line control.  The  incorporated  floor-management system and  remote-operation option  improve  utilisation  combined  with  lower  labour  costs.  Feeder  set-up  and  component supply  navigation  systems  are available, helping  to  reduce  the  work  variations. The  NPM-WX  can  handle  a  wide variety  of  components, from  0402  chip  components  up  to  large  components with  a max. size  of 150x25x40 mm.  Parts can be supplied from  tape,  stick or tray-feeder . Feeder-cart  flexibility can be provided by selecting the existing 30-input feeder cart or inserting two 17-input feeder carts. 4 different types of placement heads are available. Max. placement speed is 86,000 cph with a placement accuracy of +/-25 μm. Thanks  to  NPM-WX’s  integrated  systems,  component  diversity  and  available  options,  it  represents  the perfect solution for automated SMT production for all kinds of product. The machine is fully compatible with  other  NPM-systems  and can  therefore  also be fully integrated into  existing  production  lines. Connection  and  control  via  Panasonics  iLNB  is  ensured  to provide full  control  of  production  and  required management data. This platform is also available as a single-beam solution: NPM-WXS single beam allows various operations ranging, from NPM-series backup to multiple connection configuration.

The AM100 meets the high standards of reliability, capacity and flexibility that customers look forward to in a cost-efficient, gradationally scalable, high-mix SMT solution. It only takes one machine to start off production and extra units and/or technologies can be easily integrated according to requirements. The single-head (single beam) of Panasonic's AM100 modular placement machine is able to place an impressive component array including: 0402 mm to 120 x 90 x 2 8mm, odd-shaped components, large connectors, as well as advanced packaging types e.g.Features The single solution AM100 provides high net productivity and versatility. Equipped with a 14-nozzle head and 160 feeders the AM100 can place an impressive component range. On top the non-stop changeover allows you to prepare the next product process during running production. An off-line setup support station and a feeder set-up navigator option improves operating time and minimizes the downtime.

Automation / Labor-saving Solution + Intelligent system solution to achieve manufacturing that is further in line with production plan

Reduce offline data creation time and realization of machine downtime zero

The NPM-GW SMT mounter combines flexibility, versatility, and precision.

One step further towards the autonomous factory: the breakthrough in parts supply work innovation.

Supplied with a 40 or 80 component feeder with optional jumper wire, the compact supply unit configuration of the AV132 can fit both ammo pack and reel. The dual partition configuration enables a fast changeover. The next job can be set up while the current one is being processed.Capable of inserting components in four directions: 0°, 90°, 180°, and 270°, the AV132 optimizes productivity by simultaneously handling 26 and 52mm taped components and providing fast, full auto-recovery. The AV132 can reduce loading times by running two PCBs simultaneously, enabling efficient production due to a speed of 0.12s/component and a transfer speed of 2s/PCB.The fixed feeder unit and the out-of-component detection feature allow to replenish components while maintaining long-term non-stop runs.Preparation in advance or equipment operation during component change-over is possible.

The RG 131 is the successor of the RHSG. By supporting 3/4 pitches, expanding the range of board sizes and increasing component insertion rate, this high-density radial component insertion machine increases productivity. High speed insertion at a rate of between 0.25s and 0.6s per component can be achieved, even for large-size components with 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) configurations. A comprehensive self-correction function ensures high reliability. With large numbers of component supply and dual-partitioned component supply units, long-term operation can be obtained. A total of up to 80 types of components can be mounted. With large numbers of component supply and dual-partitioned component supply units, long-term operation can be achieved easily with the RG131. A total of up to 80 types of components can be mounted, with up to 32 (16 + 16) types of large components. The two separate component supply units enable components to be exchanged and replenished during operation. Panasonic offers also the RG131-S platform version with smaller footprint. Higher productivity expanding board size range and increasing component input.

The RL132 combines functionality and speed with an insertion rate up to 25,700cph (.14s/component), a board processing sizes up to 650 x 381mm, a 33% reduction in PCB transfer time, up to 18% reduction in electrical and air consumption per insertion and an improved parts lifespan for a very low cost of ownership. This through-hole machine features a 4-pitch span and is configurable with 40 or 80 components inputs. Meanwhile, its dual split carriage enables machine function at exchange mode and parts replenishment during production. The RL132 was designed for a non-stop productivity. The Lead V cut method enables the RL132 to insert radial lead components at a speed of 0.14s/component. Either a 2-pitch (2.5mm/5.0mm), 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) option can be selected. The fixed feeder unit method and an out-of-component detection function allow ongoing component replenishment and long-term runs. PCB of 650mm x 381mm can be processed.

PGMA - Panasonic Guided Manual Assembly helps to enhance manual assembly

Designed to measure aspherical lenses & molds, freeform optics, mirrors and any other precision component requiring nanometer level accuracy.

Featuressmart-factory-solutions software panacim-logo-02PanaCIM-EE Gen2 is the next generation of PanaCIM-EE, which allows for more efficient electronics manufacturing. This digital planning tool is necessary to enable reliable data management. This applies not only to individual systems, but to entire production lines, in which the data of each individual machine is included in the analysis. In addition, data from reports and management are included in the planning. This allows higher production rates and shorter cycle times to be achieved to make electronics production even more efficient and reliable. The PanaCIM-EE Gen2 is the next generation of a smart factory solution, connecting the shop floor with overall the management system. This includes precise inventory management, maximized factory performance based on a continuous production, total traceability, real time monitoring and optimization and an accurate in-time material supply. Material verificationMaterial controlTraceabilityProduction monitoring/dispatchProduction analysisMaintenanceEnterprise link

Featuressmart-factory-solutions software panacim-logo-02In order to make electronics manufacturing more efficient, digital planning tools and reliable data management are becoming increasingly important. This applies not only to individual systems, but to entire production lines, in which the data of each individual machine is included in the analysis. To achieve this, Panasonic developed the line management system PanaCIM-EE. With PanaCIM-EE, higher production rates and reduced cycle times can be achieved to make electronics production even more efficient and reliable. The PanaCIM-EE provides an integrated management of an entire SMT floor and achieves enhanced quality, reduced costs and increased floor productivity. This includes 8 functions, like traceability, production analysis plus monitoring and dispatching, material control and verification, maintenance management and the handling of production changeovers, linked to the customer system.

Application examplessmart-factory-solutions software_panacim application-01PREDICTIVE MANAGEMENT OF PARTS EXHAUST AND AUTOMATIC PARTS OUTPUT(Material Verification + Material Control) No waiting for parts to be supplied due to“No Parts"! Realize Reduce labor resources and Productivity improvement ! smart-factory-solutions software panacim application-02COMPONENT SUPPLY NAVIGATOR(Production Monitoring and Dispatch / Component Supply Navigator option) Reduction of the duration of machine downtime caused by parts exhaust by 73.1%*As a result of (1), the operating ratio increased by 10%**May vary depending on your operating environment. System configuration examplessmart-factory-solutions software panacim system-configuration-01CM SERIES LINEPanaCIM-EE server (app server + controller server)PanaCIM maintenance serverPT interface (communication with PT200)*System configuration differs depending on applied machine. For details, contact your local distributor or sales representative.

The NPM-DGS data creation system is the integral solution for creating, editing and simulating production and library data for high productivity.

FeaturesThe revolutionary integrated  line  management  system  is  the basis for  controlling the  entire  production line. It  is  not limited  to  Panasonic machines but  also  integrates  third-party  equipment such as PCB transfer systems, laser markers, AOI, SPI and ovens. Conventional systems require a number of PCs to control different machine types from different suppliers. The iLNB controls the entire line with only one PC.  iLNB  significantly improves overall  productivity.  Production  data  and  production  changeover  of  all equipment, such as Panasonic’s placement machines as well as non-Panasonic machines including AOI, SPI, reflow  ovens  and  others,  can  be  controlled.  All  collected  data  are  transferred  to  a remote central computer. Small  errors such  as pick-up  errors  can  be recovered from  that  central  point.  Automatic production changeover is also possible. With the iLNB, users can manage automatic product changeovers and have an E-Link which provides an interface for information input and output, for machine control, management of components per feeder, and communication with a GEM/PLC. iLNB provides total control of the production line by interfacing between Panasonic and non-Panasonic machines, acting as one-stop channel. With the iLNB Users can manage automatic product changeovers and have an E-Link which provides an interface for information in- and output, for machine control, management of component per feeder and a communication to GEM/PLC. Automatic changeover Registration of automatic changeover recipeLine automatic changeoverAutomatic changeover monitoringLine operation monitoringE-Link interface for Information inputDownload / edit of scheduleE-Link interface for Information outputOperational information outputTrace information outputMachine status outputE-Link interface for machine controlMachine interlock; production start controlE-Link interface for feeder writeWriting of component data by an external systemCommunications to GEM/PLCSECS2/GEM communicationOPC communicationIO/RS-232C communication

Panasonic’s manufacturing operations optimizer automatically draws up production plans to reduce man-hours and enhancing production efficiency.

The PSX307 Plasma Cleaner provides 1.5 times the productivity of conventional plasma cleaners. Panasonic's parallel plate plasma chamber technology delivers superior etch uniformity compared to conventional batch-type plasma cleaner systems.By using an argon plasma treatment, ultra-thin gold-plated electrodes can be wire-bonded reliably without the formation of nickel compounds. The savings achieved in cheaper gold plating can provide the ROI justification alone. The PSX307 Plasma Cleaner's other capabilities include surface modification by oxygen plasma, improving mold resin adhesion and under-fill wettability, and reducing the incidence of peel-off, voids, and cracks.Panasonic's Plasma Monitoring System suppresses abnormal discharges for a secure and efficient production process. The option to include traceability functionality ensures high level process quality as well.

Building upon the PSX307 Plasma Cleaner, the PSX307A Plasma Cleaner features an enlarged plasma chamber capacity that improves productivity. In addition, the PSX307A system is able to handle full wafers (both bare and on dicing frames).  Besides the increased capacity, Panasonic's original Plasma Monitoring System suppresses abnormal discharges resulting in a secure and efficient production process.  Additionally, the option to include a traceability functionality  ensures high level process Quality.