Proiettore a laser Solid Shine compatto da 12.000 lumen

PT-RZ12

Discontinued

Progettato per una luminosità stabile a lunga durata in eventi e staging Proiettore con sorgente di luce a laser DLP a 3 chip, 12.000 lumen, WUXGA.

View full specifications Condividi pagina

Caratteristiche principali

Laser DLP a 3 chip, 12.000 lumen, WUXGA

Velocità di fotogrammi elevata a 120 Hz per filmati straordinari e nitidi

Proiezione a laser senza lampada e sistema a liquido refrigerante resistente alla polvere, per un funzionamento di 20.000 ore senza manutenzione

Rapporto di contrasto 20.000:1

Il processore Real Motion combina la creazione di fotogrammi e l'elaborazione ad alta velocità (120 Hz) per una riproduzione perfetta dei movimenti fluidi
12.000 lm per una luminosità incredibile
Il proiettore DLP™ a 3 chip più leggero al mondo (a giugno 2015), con un peso di appena 45 kg
Il Contrasto dinamico raggiunge un rapporto di contrasto pari a 20.000:1^*1, controllando l'emissione della luce laser
Detail Clarity Processor di nuova generazione per produrre immagini con trame naturali nei minimi dettagli
System Daylight View 3 per una percezione cromatica avanzata negli ambienti intensamente illuminati e nelle applicazioni di mappatura
Modalità di simulazione DICOM per presentazioni e formazione medica*2
Modalità 709 assicura una riproduzione accurata dei colori per la proiezione HDTV

Show more Show less

Costi di esercizio ridotti, affidabilità superiore

Durata estremamente prolungata della sorgente di luce, fino a 20.000 ore^*3
L'innovativo sistema di raffredamento a liquido consente un funzionamento silenzioso
Funzionamento stabile in presenza di temperature ambientali fino a 45 °C^*4
Riproduzione dei colori coerente, senza deterioramento delle immagini nel tempo
Il motore della sorgente di luce laser consente il funzionamento 24/7
Blocco ottico resistente alla polvere
Ampio intervallo di spostamento motorizzato dell'obiettivo

Flessibilità di installazione a 360°

Proiezione verticale, orizzontale e inclinata, a 360° gradi, consentita dalla sorgente di luce laser
Il sistema di supporto multischermo unisce perfettamente le immagini proiettate, grazie a Edge Blending, Color Matching e Digital Image Enlargement.
Geometric Adjustment per la proiezione su superfici curve o sferiche
Compatibile con il Kit di regolazione automatica dello schermo ET-CUK10^*5
Controllo della luminosità per più unità
Compatibile con il Multi Monitoring & Control Software e l'Early Warning Software di Panasonic
La connessione DIGITAL LINK a cavo singolo trasmette segnali video e di controllo a una distanza fino a 100 m
Compatibile con il protocollo di controllo del segnale luminoso DMX di Art-Net
Ampia gamma di terminali, inclusi 3G-SDI, DIGITAL LINK, DVI-D e HDMI
Condivide obiettivi comuni (incluso l'obiettivo ultra-short throw ET-D75LE90) con la gamma di proiettori DLP™ a 3 chip di Panasonic.

^{*1 Attivazione/disattivazione complete, con Contrasto dinamico impostato su “3”, *2 Questo prodotto non è uno strumento medico. Non utilizzarlo per diagnosi mediche reali, *3 L'ambiente di utilizzo può influire sulla durata della sorgente di luce, *4 È possibile ridurre l'emissione luminosa per proteggere il proiettore in base alle condizioni ambientali, *5 L'ET-CUK10 è disponibile per l'utilizzo in tutto il mondo, tranne negli Stati Uniti. La disponibilità dipende dal paese}

Galleria prodotti

Scarica

Scarica

Scarica

Scarica

Scarica

Tabella delle specifiche

Lamp	3-Chip DLP Laser
Luminosità	12,000 lumens
Risoluzione	1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)
Power Supply	AC 100-240 V 50/60 Hz
Power Consumption	1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3
BTU Value	Max 4,096 BTU
DLP™ Chip \| Panel Size	24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 3 (R, G, B), DLP™ projection system

View full specifications

Serie di prodotti

PT-RQ13 Series

Accessori & Software

Digital Interface Box

ET-YFB100G

Combinando l'ET-YFB100G con un dispositivo predisposto per DIGITAL LINK è possibile trasmettere segnali video, audio e di controllo tramite un cavo singolo.

View product

Key Features
Si semplificano i cablaggi e gli upgrade del sistema ed è molto più agevole installare il proiettore a soffitto o in altre posizioni permanenti
Trasmissione fino a 100 m Ampia gamma di terminali di ingresso, compresi due set di ingressi HDMI e RGB.
Un’uscita audio separata consente di trasmettere suoni quando il display non è alimentato.
L’ingresso dell’ET-YFB100G è selezionabile con il telecomando di un display Panasonic compatibile con DIGITAL LINK.
L’ingresso dell’ET-YFB100G è selezionabile con il telecomando di un display Panasonic compatibile con DIGITAL LINK

Showing 1 of 1

Digital Interface Box

ET-YFB100G

Combinando l'ET-YFB100G con un dispositivo predisposto per DIGITAL LINK è possibile trasmettere segnali video, audio e di controllo tramite un cavo singolo.

View product

Key Features
Si semplificano i cablaggi e gli upgrade del sistema ed è molto più agevole installare il proiettore a soffitto o in altre posizioni permanenti
Trasmissione fino a 100 m Ampia gamma di terminali di ingresso, compresi due set di ingressi HDMI e RGB.
Un’uscita audio separata consente di trasmettere suoni quando il display non è alimentato.
L’ingresso dell’ET-YFB100G è selezionabile con il telecomando di un display Panasonic compatibile con DIGITAL LINK.
L’ingresso dell’ET-YFB100G è selezionabile con il telecomando di un display Panasonic compatibile con DIGITAL LINK

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 terminali DIGITAL LINK (con tecnologia HDBaseT™) trasmettono segnali digitali HD video, audio e di comando, senza compressione, a due proiettori/display.

View product

Key Features
Trasmissione DIGITAL LINK a lunga distanza (fino a 150 m) tramite un singolo cavo LAN
Riduzione nei costi di cablaggio e nella complessità della posa dei cavi.
Dispositivo completo, integrato con splitter, commutatore, scaler e tecnologia di conversione DIGITAL LINK
Possibilità di connessione di più commutatori ET-YFB200G per installare dispositivi di visualizzazione aggiuntivi
Dimensioni semi-rack compatte

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 terminali DIGITAL LINK (con tecnologia HDBaseT™) trasmettono segnali digitali HD video, audio e di comando, senza compressione, a due proiettori/display.

View product

Key Features
Trasmissione DIGITAL LINK a lunga distanza (fino a 150 m) tramite un singolo cavo LAN
Riduzione nei costi di cablaggio e nella complessità della posa dei cavi.
Dispositivo completo, integrato con splitter, commutatore, scaler e tecnologia di conversione DIGITAL LINK
Possibilità di connessione di più commutatori ET-YFB200G per installare dispositivi di visualizzazione aggiuntivi
Dimensioni semi-rack compatte

Showing 1 of 1

AVAILABLE FROM CY2024 Q3

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEU101

Deliver Spectacular Images at Short Distance with New Zero-Offset Lenses

View product

Key Features
Minimize Throw Distance, Increase Flexibility
Wide-Range Adjustment After Projector Installation
Lens Design Delivers an Unobstructed View

Lenses for 3-Chip DLP < 35.000 lumens

ET-D75MC1

Coperchio del motore obiettivo per proiettori 3-DLP

View product

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEF70

L’ampio angolo di visione (91,5°) garantisce la massima copertura dello schermo con un singolo proiettore.

View product

Key Features
Compatibile con proiettori DLP a 3 chip a elevata luminosità (fino a 30.000 lumen)
Supporta la proiezione di immagini a risoluzione ultra-elevata WQXGA (4K+)
La flessibilità di installazione è supportata da un ampio spostamento dell’obiettivo (verticale: fino a ± 37%, orizzontale: fino a ± 17%).
Adattato per applicazioni dome-theater in planetari, cupole video in esposizioni o attrazioni in parchi tematici

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEW50

Obiettivo a fuoco fisso per proiettore DLP a 3 chip, Rapporto di proiezione 0,7:1 (WUXGA)

View product

Showing 4 of 4

Filters

ET-EMF330

Filtro Eco

View product

Filters

ET-SFR330

Cut Filter per fumo

View product

Showing 2 of 2

Autoscreen Adjustment

ET-CUK10_CUK10P

Amplia il software Geometry Manager Pro permettendo la regolazione automatica delle proiezioni multi-schermo o su schermi curvi.

View product

Key Features
Utilizzando videocamere esterne compatibili e il software Geometry Manager Pro è possibile sfruttare, in modo semplice e rapido, funzioni quali Edge Blending, Colour-Matching, Geometry Adjustment e il controllo della luminosità.

Showing 1 of 1

Software

Multi Monitoring and Control Software

Controllo remoto, monitoraggio e reporting di stato live sulla flotta di proiettori e display via intranet.

View product

Key Features
È possibile controllare lo stato di massimo 2.048 dispositivi da un PC singolo.
È semplice gestire gruppi di dispositivi in base alle categorie “Gruppo” o “Parola chiave” e secondo la posizione o l’applicazione.
Sono supportati comandi programmati per un dispositivo selezionato o per un gruppo di dispositivi. Le funzioni includono comandi di controllo, distribuzione di immagini, controllo di luminosità del proiettore, trasmissione di un elenco contenuti, controllo di Light ID e altro ancora.
Possibilità di distribuzione di contenuti multimediali da una playlist, comprese immagini fisse e video, dal PC a proiettori e display selezionati. Inoltre, su dispositivi selezionati, è supportata la trasmissione di Light ID LinkRay™.
Ampliate le vostre possibilità aggiungendo il software Early Warning e funzioni di manutenzione predittiva e notifica al vostro sistema di monitoraggio.

Showing 1 of 1

Brackets

ET-PKD520S

Staffa di montaggio per soffitti bassi

View product

Showing 1 of 1

Frames

ET-RFD60

The rental frames are sturdy, strong and visually appealing. In addition, they offer a horizontal and vertical adjustment feature for the ideal projector position.

View product

Key Features
Convertible Design
Improved adjustment possibilities
Full stacking compatibility to earlier frame models
Built-in galvanic inslation
DGUV V17 verified

Showing 1 of 1

Media Processor

ET-FMP20

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Media Processor

ET-FMP50

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Showing 2 of 2

Media Processor

ET-FMP20

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Media Processor

ET-FMP50

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

View product

Key Features
Flexible Design Streamlines Installation
Simple Yet High-Precision Adjustment
Smooth and Continuous Content Playback

Showing 2 of 2

Full specifications

Download specifications

Lamp	3-Chip DLP Laser
Luminosità	12,000 lumens
Risoluzione	1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)
Power Supply	AC 100-240 V 50/60 Hz
Power Consumption	1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3
BTU Value	Max 4,096 BTU
DLP™ Chip \| Panel Size	24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ Chip \| Pixels	2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
Lens	Optional powered zoom/focus lenses
Light Source	Laser Diode (Laser class: Class 1) Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³ 43,800 hours at constant luminance (Longlife1) 61,320 hours at constant luminance (Longlife2) 87,600 hours at constant luminance (Longlife3)
Screen Size	1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio) 1.78-15.24 m (70-600 inches) with the ET-D75LE8 (16:10 aspect ratio) 3.05-15.24 m (120-600 inches) with the ET-D75LE90 (16:10 aspect ratio)
Center-to-Corner Uniformity	90%
Contrasto	20,000:1 (full on/full off, in Dynamic Contrast 3 mode)
Scanning Frequency \| SDI	SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE ST 259 compliant: 525i(480i), 625i(576i) Single-link HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 292 compliant: 750(720)/60p, 750(720)/50p, 1125(1035)/60i, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 372 compliant: 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p 2048 x 1080/24p, 2048 x 1080/24sF, Dual-link HD-SDI signal (X Y Z 4:4:4 12-bit): SMPTE ST 372 compliant: 2048 x 1080/24p, 2048 x 1080/24sF, 3G-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 424 compliant: 1125(1080)/60p, 1125(1080)/50p 3G-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 424 compliant: 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p Dual-link 3G-SDI signal (YPBPR 4:4:4 12-bit/10-bit): SMPTE ST 425 compliant: 1125(1080)/60i, 1125(1080)/50i, 2048 x 1080/48p, 2048 x 1080/50p, 2048 x 1080/60p Dual-link 3G-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 425 compliant: 1125(1080)/60i, 1125(1080)/50i, 2048 x 1080/48p, 2048 x 1080/50p, 2048 x 1080/60p
Scanning Frequency \| HDMI/DVI-D	Horizontal: 15 kHz-100 kHz, vertical: 24 Hz - 120 Hz, dot clock: 25 MHz - 162 MHz
Scanning Frequency \| RGB	Horizontal: 15 kHz-100 kHz, vertical: 24 Hz - 120 Hz, dot clock: 162 MHz or less
Scanning Frequency \| YPBPR (YCBCR)	525i (480i): fH 15.73 kHz; fV 59.94 Hz, 625i (576i): fH 15.63 kHz; fV 50 Hz, 525p (480p): fH 31.47 kHz; fV 59.94 Hz, 625p (576p): fH 31.25 kHz; fV 50 Hz, 750 (720)/60p: fH 45.00 kHz; fV 60 Hz, 750 (720)/50p: fH 37.50 kHz; fV 50 Hz, 1125 (1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency \| Video/Y/C	fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical Axis Shift \| Vertical	±55% (±44% with the ET-D75LE6), (+73-78% with the ET-D75LE90), from center of screen, powered
Optical Axis Shift \| Horizontal	±20% (±15% with the ET-D75LE6), (±6% with the ET-D75LE90), from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Keystone Correction Range	Vertical : ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90), horizontal: ±15° (0° with the ET-D75LE90)
Installazione	Ceiling/floor, front/rear
Terminals \| SDI In 1	BNC x 2, Dual-link 3G-SDI signal: SMPTE ST 425 compliant 3G-SDI (3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI) signal: SMPTE ST 424 compliant Dual-link HD-SDI signal: SMPTE ST 372 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
Terminals \| HDMI In	HDMI 19-pin x 1, Deep Color, compatible with HDCP, NOTE: Compatible with non-interlaced signals only.
Terminals \| DVI-D In	DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals \| RGB 1 In	BNC x 5
Terminals \| RGB 1 In \| R, G, B	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 1 In \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| RGB 1 In \| Video in	BNC x 1, 1.0 Vp-p 75 ohms Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals \| RGB 2 In	D-sub HD 15-pin (female) x 1
Terminals \| RGB 2 In \| R, G, B	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals \| RGB 2 In \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| 3D Sync 1 In/Out	BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals \| 3D Sync 2 Out	BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals \| Serial In	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| Serial Out	D-sub 9-pin (male) x 1 for link control
Terminals \| Remoter 1 In	M3 jack x 1 for wired remote control
Terminals \| Remoter 1 Out	M3 jack x 1 for link control
Terminals \| Remoter 2 In	D-sub 9-pin x 1 for external control (parallel)
Terminals \| DIGITAL LINK/LAN	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible
Power Cord Length	3.0 m (9 ft 10 in)
Cabinet Materials	Molded plastic
Dimensioni (LxAxP)	578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 inches) (without lens)
Peso	44 kg (97.0 lbs) (without lens)
Operating Noise	43 dB
Temperatura	Normal The operating temperature range is 0°C to 50°C (32 °F to 122 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.) Eco/Long life 1/2/3 The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.) When the projector is used with a Smoke Cut Filter The operating temperature range is 0°C to 40°C (32 °F to 104 °F). (The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.) * The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be.
Applicable Software	Logo Transfer Software, Multi Monitoring & Control Software,Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit)
Tecnologia	3-chip DLP Laser

PT-RQ13 Series
Model	PT-RQ13	PT-RZ12	PT-RS11
Lens test	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses
Projector Type	3-Chip DLP Laser	3-Chip DLP Laser	3-Chip DLP Laser
DLP™ Chip \| Panel Size	22.9 mm (0.9 inches) diagonal (16:10 aspect ratio)	24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)	24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 3 (R, G, B), DLP™ projection system	DLP™ chip x 3 (R, G, B), DLP™ projection system	DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip \| Number of Pixels	4,096,000 (2,560 x 1,600) x 3, total of 12,288,000 pixels 49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON	2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels	1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels
Brightness	10,000 lumens	12,000 lumens	12,000 lumens
Light Source	Laser Diode (Laser class: Class 1)Class 3R for North America. Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³ 43,800 hours at constant luminance (Longlife1) 61,320 hours at constant luminance (Longlife2) 87,600 hours at constant luminance (Longlife3)	Laser Diode (Laser class: Class 1) Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³ 43,800 hours at constant luminance (Longlife1) 61,320 hours at constant luminance (Longlife2) 87,600 hours at constant luminance (Longlife3)	Laser Diode (Laser class: Class 1) Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³ 43,800 hours at constant luminance (Longlife1) 61,320 hours at constant luminance (Longlife2) 87,600 hours at constant luminance (Longlife3)
Resolution	5,120 x 3,200 pixels (Quad Pixel Drive: ON)	1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)	1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Contrast Ratio	20,000:1 (full on/full off, in Dynamic Contrast 3 mode)	20,000:1 (full on/full off, in Dynamic Contrast 3 mode)	20,000:1 (full on/full off, in Dynamic Contrast 3 mode)
Screen Size	1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio) 1.78-15.24 m (70 - 600 inches) with the ET-D75LE8 (16:10 aspect ratio) 3.05-15.24 m (120 - 600 inches) with the ET-D75LE90 (16:10 aspect ratio)	1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio) 1.78-15.24 m (70-600 inches) with the ET-D75LE8 (16:10 aspect ratio) 3.05-15.24 m (120-600 inches) with the ET-D75LE90 (16:10 aspect ratio)	1.78-25.4 m (70-1,000 inches) (4:3 aspect ratio) 1.78-15.24 m (70-600 inches) with the ET-D75LE8 (4:3 aspect ratio) 3.05-15.24 m (120-600 inches) with the ET-D75LE90 (4:3 aspect ratio)
Optical Axis Shift \| Vertical	±59% (±44% with the ET-D75LE6), (+74-84% with the ET-D75LE90), from center of screen, powered	±55% (±44% with the ET-D75LE6), (+73-78% with the ET-D75LE90), from center of screen, powered	±50% (±40% with the ET-D75LE6), (+71% with the ET-D75LE90), from center of screen, powered
Optical Axis Shift \| Horizontal	±29% (±19% with the ET-D75LE6), (-12-16% with the ET-D75LE90), from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.	±20% (±15% with the ET-D75LE6), (±6% with the ET-D75LE90), from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.	±30% (±20% with the ET-D75LE6) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50/ET-D75LE90.
Lens	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses
Installation	Ceiling/floor, front/rear	Ceiling/floor, front/rear	Ceiling/floor, front/rear
Terminals \| SDI In 1	BNC x 1, 3G/HD/SD-SDI input, Dual-link input (LINK-A) , Quad-link input SD-SDI signal SMPTE ST 259 compliant HD-SDI signal SMPTE ST 292 compliant 3G-SDI signal SMPTE ST 424 compliant Dual-link HD-SDI signal SMPTE ST 372 compliant Dual-link 3G-SDI signal SMPTE ST 425 compliant Quad-link HD-SDI signal Quad-link 3G-SDI signal SMPTE ST 425 compliant	BNC x 2, Dual-link 3G-SDI signal: SMPTE ST 425 compliant 3G-SDI (3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI) signal: SMPTE ST 424 compliant Dual-link HD-SDI signal: SMPTE ST 372 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant	BNC x 2, (3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI) 3G-SDI signal: SMPTE ST 424 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
Terminals \| HDMI In		HDMI 19-pin x 1, Deep Color, compatible with HDCP, NOTE: Compatible with non-interlaced signals only.	HDMI 19-pin x 1, Deep Color, compatible with HDCP, NOTE: Compatible with non-interlaced signals only.
Terminals \| DVI-D In		DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only	DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals \| RGB 1 In		BNC x 5	BNC x 5
Terminals \| RGB 1 In \| R, G, B		R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 1 In \| Y, PB, PR (Y, CB, CR)		Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms	Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| RGB 1 In \| Video in		BNC x 1, 1.0 Vp-p 75 ohms Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms	BNC x 1, 1.0 Vp-p 75 ohms Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals \| RGB 2 In		D-sub HD 15-pin (female) x 1	D-sub HD 15-pin (female) x 1
Terminals \| RGB 2 In \| R, G, B		R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals \| RGB 2 In \| Y, PB, PR (Y, CB, CR)		Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| 3D Sync 1 In/Out		BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA	BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals \| 3D Sync 2 Out		BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA	BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals \| Serial In	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| Serial Out	D-sub 9-pin (male) x 1 for link control	D-sub 9-pin (male) x 1 for link control	D-sub 9-pin (male) x 1 for link control
Terminals \| Remote 1 In		M3 jack x 1 for wired remote control	M3 jack x 1 for wired remote control
Terminals \| Remote 1 Out		M3 jack x 1 for link control	M3 jack x 1 for link control
Terminals \| Remote 2 In	D-sub 9-pin (female) x 1 for external control (parallel)	D-sub 9-pin x 1 for external control (parallel)	D-sub 9-pin x 1 for external control (parallel)
Terminals \| DIGITAL LINK	RJ-45 x 1 (for network, DIGITAL LINK connection (HDBaseT™ compatible), 100Base-TX,compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP2.2)	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible
Terminals \| Expansion Slot	x 2 (SLOT 1，SLOT 2), SLOT NX (Compatible with Optional Board)
Power Supply	AC 100-240 V, 50/60 Hz (Note: Brightness may decrease depending on power conditions)	AC 100-240 V 50/60 Hz	AC 100-240 V 50/60 Hz
Power Consumption	1,270 W (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 913W ECO: 782W LONG LIFE1: 531-732W LONG LIFE 2: 477-702W LONG LIFE 3: 423-665W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3	1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3	1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3
Cabinet Materials	Molded plastic	Molded plastic	Molded plastic
Operation Noise	46 dB	43 dB	43 dB
Operating Temperature	Ambient operating temperature: 0°C to 45°C (32 °F to 113 °F). Ambient operating humidity: 10% - 80% (no condensation) When the operating mode is set to "Normal", the operating temperature range is 0°C to 45°C (32 °F to 113 °F), and at altitudes from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) it is 0°C to 40°C (32 °F to 104 °F). When the operating mode is set to "Eco", or "Long Life 1/2/3", the operating temperature range is 0°C to 40°C (32 °F to 104 °F). When the projector is used with a Smoke Cut Filter, the operating temperature range is 0°C to 35°C (32 °F to 95 °F). Furthermore, when the operating mode is set to "Eco", or "Long Life 1/2/3",the projector cannot be used at altitudes above 2700 m (8,858 ft). In addition, when the projector is used with a Smoke Cut Filter, it cannot be used at altitudes above 1,400 m (4,593 ft). The brightness of the light source may drop depending on the operating environment and the operating temperature range in order to protect the projector.	Normal The operating temperature range is 0°C to 50°C (32 °F to 122 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.) Eco/Long life 1/2/3 The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.) When the projector is used with a Smoke Cut Filter The operating temperature range is 0°C to 40°C (32 °F to 104 °F). (The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.) * The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be.	Normal The operating temperature range is 0°C to 50°C (32 °F to 122 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.) Eco/Long life 1/2/3 The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.) When the projector is used with a Smoke Cut Filter The operating temperature range is 0°C to 40°C (32 °F to 104 °F). (The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.) * The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be.
Dimensions	578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 inches) (with projections) 578 x 270 x 725 mm (22-3/4 x 10-5/8 x 28-17/32 inches) (without lens, feet or projections)	578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 inches) (without lens)	578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 inches) (without lens)
Weight	49 kg (108.0 lbs) (without lens)	44 kg (97.0 lbs) (without lens)	44 kg (97.0 lbs) (without lens)
Applicable Software/Application	Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit)	Logo Transfer Software, Multi Monitoring & Control Software,Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit)	Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit)

Proiettore a laser Solid Shine compatto da 12.000 lumen

PT-RZ12

Caratteristiche principali

Costi di esercizio ridotti, affidabilità superiore

Flessibilità di installazione a 360°

Galleria prodotti

Tabella delle specifiche

Serie di prodotti

Accessori & Software

ET-YFB100G

ET-YFB100G

ET-YFB200G

ET-YFB200G

ET-D3LEU101

ET-D75MC1

ET-D3LEF70

ET-D3LEW50

ET-EMF330

ET-SFR330

ET-CUK10_CUK10P

Multi Monitoring and Control Software

ET-PKD520S

ET-RFD60

ET-FMP20

ET-FMP50

ET-FMP20

ET-FMP50

Risorse correlate