Breadcrumb
30 000 lumens-class Solid Shine Laser Projector.
PT-RZ31K
DiscontinuedStunning image quality in a compact body designed for large venues. Laser light source, 3-chip DLP, 31 000 centre lumens, WUXGA, maintenance-free projector...
Key features
Laser 3-chip DLP, 31 000 centre lumens, WUXGA . |
Lamp-free laser projection and dust resistant liquid cooling system with 20000 hours of free maintenance . |
120Hz high frame rate for superb and sharp motion pictures . |
20,000:1 contrast ratio . |
Geometric Manager Pro, colour matching and edge blending . |
PT-RQ32 | PT-RZ31 | PT-RS30 | |
---|---|---|---|
Brightness | 27.000 lm (center) / 26.000 lm | 31.000 lm (center) / 30.000 lm | 31.000 lm (center) / 30.000 lm |
Resolution | 4K | WUXGA (1,920x 1,200) | SXGA+ (1,400x 1,050) |
Contrast | 20.000:1 | 20.000:1 | 20.000:1 |
- Brighter, more immersive visual experiences
- Ultra-durable for continuous operation
- Exceptional image quality
- Flexible setup
The PT-RZ31K Series combines 3-Chip DLP with proprietary SOLID SHINE laser technology for brighter and immersive visual experiences. Designed for convenient and flexible on-site installation, along with a range of advanced features that promote lower cost of ownership, this projector produces magnificent image quality in large venue applications.
ULTRA-DURABLE FOR CONTINUOUS OPERATION
Dustproof for ultimate endurance
Combining hermetically sealed laser modules, a long-life Eco Filter, and a new air-intake system, the PT-RZ31K is able to maintain picture quality in locations prone to dust contamination. Panasonic’s SOLID SHINE Laser products exceed rigorous dusting requirements to ensure stable operation in dusty environments containing 0.150 mg of particulate matter per cubic meter[1].
24/7 reliable operation
With the dual drive laser optical engine, it groups laser diodes into two discrete light sources. This means an uninterrupted projection even in the unlikely event a light source fails - ideal for mission-critical applications and high profile events. It also helps minimise brightness and colour degradation over the 20,000-hour maintenance-free service life.
*1 Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m3 of particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests.
Advanced liquid cooling system assures stable operation
A unique liquid cooling system is designed to suppress temperature rises by protecting the laser engine and cooling the light source modules in high temperatures. This not only assures stable and continues operation during longer usage, it also eliminates the obtrusive and variable fan noise.
Uninterrupted coverage with backup input setting
An automatic backup input setting promises uninterrupted image display in venues such as control rooms, and giving added reassurance at events where projection can’t afford to be interrupted.
IMAGES THAT REPLICATE REAL LIFE EXPERIENCES
Experience true-to-life imagery with Detail Clarity Processor 5
New-generation circuitry analyses images frame by frame to clarify areas containing fine details and textures. Information from four frequency bandwidths is extracted using a bespoke algorithm, from super-high to low, to sharpen outlines, correct contours, and reduce ringing noise – further enhancing even the most delicate of details in 4K+ images.
20,000:1 dynamic contrast ratio
Digitally controlled frame-by-frame scene linking modulations allows you to achieve higher contrast ratio with less power consumption. Deep black levels and bright whites are delivered with outstanding depth and dimension, whilst accurate 20,000:1 contrast is achieved even when bright and dark scenes frequently interchange.
Fully optimised mapping and daylight projection
System Daylight View 3, Panasonic’s flagship daylight projection optimisation technology,
prevents pictures washing out in bright light and enhances impact in mapping and multi-projector applications. It uses sensor information to adjust sharpness, manipulate gamma curves, and correct colours.
Motion blur reduction feature
Images of up to 120 Hz*1 can be displayed with Dual-link 3G-SDI, DVI-D, and HDMI simultaneous inputs. Thanks to Panasonic’s Real Motion Processor, fast-moving images can be delivered with improved focus and smoother transitions for enhanced visibility.
CUSTOMISABLE SETUP AND DYNAMIC FUNCTIONALITY
Flexible projection from any angle
SOLID SHINE Laser technology enables free 360-degree installation through any axis. Courtesy of a powered lens shift and a wide range of optional lenses, the projector can be mounted in any way desired without picture distortion - either temporarily or in permanent applications.
Contrast sync and shutter functions
Contrast control and shutter timing are synchronized for multi-screen configurations, allowing for consistent picture quality across multiple screens. Meanwhile, the Shutter Sync function synchronizes shutter on/off timing between all networked projectors.
Sophisticated image-adjustment software
Geometry Manager Pro is free software that offers more sophisticated image-adjustment functionality and makes complex multi-screen set up easy. An optional ET-UK20 upgrade kit with Geometry Manager Pro software supports colour matching, edge blending for multi-projector set ups. It’s flexile and complex geometric adjustment capability suits a wide variety of screen shapes.
Early Warning Software ET-SWA100 Series (Optional)
Early Warning Software monitors the status of projectors and displays connected to an intranet, and notifies the operator when issues are detected or predicted. This helps to minimise downtime and provides stable and continuous operation.
Common Lenses for Panasonic 3-Chip DLP™ Projectors
Panasonic 3-Chip DLP™ projectors share a range of optional lenses, including ultra-short-throw lens and zoom lens for long throw distances, so you can switch and change lenses to suit the venue. This reduces the total cost of ownership for staging and event companies with large projector requirements.
*1 Refresh-rate varies depending on vertical scanning frequency.
Product gallery
Specifications table
Brightness | 30,000 lm/31,000 lm (Center) |
---|---|
Technology | 3-Chip DLP Laser |
Resolution | 1920 x1200 pixels (Input signals that exceed this resolution will be converted to 1920 x1200 pixels.) |
Brightness*1 | Varies depending on operation mode setting. 30,000 lm*2*4/31,000 lm*3*4 (Center) (HIGH) 25,000 lm*2*4/26,000 lm*3*4 (Center) (NORMAL) 12,000 lm at constant luminance (LONG LIFE 1) 10,000 lm at constant luminance (LONG LIFE 2) 8,000 lm at constant luminance (LONG LIFE 3) |
DLP™ Chip | Panel Size | 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio) |
DLP™ Chip | Display Method | DLP™chip x 3 (R, G, B), DLP™projection system |
DLP™ Chip | Pixels | 2,304,000 (1920 x1200) x3, total of 6,912,000 pixels |
Light Source | Laser Diode Laser class 1 |
Product series
PT-RZ31K Series
PT-RZ31K Series | |||
---|---|---|---|
Model | |||
Lens test | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses. |
DLP™ Chip | Panel Size | 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio) | 24.1 mm (0.95 inches) diagonal (4:3 aspect ratio) | 22.9mm (0.9 inches) diagonal (16:10 aspect ratio) |
DLP™ Chip | Display Method | DLP™chip x 3 (R, G, B), DLP™projection system | DLP™chip x 3 (R, G, B), DLP™projection system | DLP™ chip x 3 (R, G, B), DLP™ projection system |
DLP™ chip | Number of Pixels | 2,304,000 (1920 x1200) x3, total of 6,912,000 pixels | 1,470,000 (1400 x1050) x3, total of 4,410,000 pixels | 4,096,000 (2560 x1600) x3, total of 12,288,000 pixels |
Brightness | Varies depending on operation mode setting.
30,000 lm*2*4/31,000 lm*3*4 (Center) (HIGH)
25,000 lm*2*4/26,000 lm*3*4 (Center) (NORMAL)
12,000 lm at constant luminance (LONG LIFE 1)
10,000 lm at constant luminance (LONG LIFE 2)
8,000 lm at constant luminance (LONG LIFE 3) | 30,000 lm/ 31,000 lm (Center) | Varies depending on operation mode setting.
26,000 lm*2*4/27,000 lm*3*4 (Center) (HIGH)
21,600 lm*2*4/22,500 lm*3*4 (Center) (NORMAL)
12,000 lm at constant luminance (LONG LIFE 1)
10,000 lm at constant luminance (LONG LIFE 2)
8,000 lm at constant luminance (LONG LIFE 3) |
Light Source | Laser Diode Laser class 1 | Laser Diode Laser class 1 | Laser Diode Laser class 1 |
Resolution | 1920 x1200 pixels (Input signals that exceed this resolution will be
converted to 1920 x1200 pixels.) | 1400 x1050 pixels (Input signals that exceed this resolution will be
converted to 1400 x1050 pixels.) | 5120 x3200 pixels when Quad Pixel Drive set to ON |
Contrast Ratio | 20,000:1 (full on/full off, in Dynamic Contrast 3 mode) | 20,000:1 (full on/full off, in Dynamic Contrast 3 mode) | 20,000:1 (full on/full off, in Dynamic Contrast 3 mode) |
Screen Size | 1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio)
1.78-15.24 m (70-600 inches) with the ET-D75LE8 (16:10 aspect ratio)
3.05-15.24 m (120 - 600 inches) with the ET-D75LE95 (16:10 aspect ratio) | 1.78-25.4 m (70-1,000 inches) (4:3 aspect ratio)
1.78-15.24 m (70-600 inches) with the ET-D75LE8 (4:3 aspect ratio)
3.05-15.24 m (120-600 inches) with the ET-D75LE95 (4:3 aspect ratio) | 1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio)
1.78-15.24 m (70-600 inches) with the ET-D75LE8 (16:10 aspect ratio)
3.05-15.24 m (120 - 600 inches) with the ET-D75LE95 (16:10 aspect ratio) |
Optical Axis Shift | Vertical | ±55% (±44% with the ET-D75LE6), (+68-78% with the ET-D75LE95),
from center of screen, powered | ±50% (±40% with the ET-D75LE6), (+67-71% with the ET-D75LE95),
from center of screen, powered | ±59% (±56% with the ET-D75LE6), (+69-84% with the ET-D75LE95), from center of screen, powered |
Optical Axis Shift | Horizontal | ±20% (±15% with the ET-D75LE6), (±12% with the ET-D75LE95),
from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. | ±30% (±20% with the ET-D75LE6), (±8% with the ET-D75LE95),
from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. | ±29% (±19% with the ET-D75LE6), (±21% with the ET-D75LE95), from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. |
Lens | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses. |
Installation | Ceiling/floor, front /rear, free 360-degree installation | Ceiling/floor, front /rear, free 360-degree installation | Ceiling/floor, front /rear, free 360-degree installation |
Terminals | SDI In 1 | BNC x 1
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424 compliant
Dual link HD-SDI (LINK-A) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 1) signal SMPTE ST 425 compliant | BNC x 1
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424 compliant
Dual link HD-SDI (LINK-A) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 1) signal SMPTE ST 425 compliant | BNC x 1
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424 compliant
Dual link HD-SDI (LINK-A) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 1) signal SMPTE ST 425 compliant
Quad-link HD-SDI (Link 1) signal
Quad-link 3G-SDI (Link 1) signal SMPTE ST 425 compliant |
Terminals | HDMI In | HDMI 19-pin x1
HDCP compatible, Deep Color compatible | HDMI 19-pin x1
HDCP compatible, Deep Color compatible | |
Terminals | DVI-D In | DVI-D 24-pin x1
Single link, DVI 1.0 compliant, HDCP compatible | DVI-D 24-pin x1
Single link, DVI 1.0 compliant, HDCP compatible | |
Terminals | RGB 1 In | BNC x 5 | BNC x 5 | |
Terminals | RGB 1 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | |
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | |
Terminals | RGB 1 In | Video in | BNC x 1, 1.0 Vp-p, 75 ohms | BNC x 1, 1.0 Vp-p, 75 ohms | |
Terminals | RGB 2 In | D-sub HD 15-pin (female) x 1 | D-sub HD 15-pin (female) x 1 | |
Terminals | RGB 2 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | |
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | |
Terminals | Multi Projector Sync In | BNC x 1, IN : TTL Hi-z | ||
Terminals | Multi Projector Sync Out | BNC x 1, TTL max10mA | ||
Terminals | Serial In | D-sub 9 pin x 1 for external control (RS-232C compliant) | D-sub 9 pin x 1 for external control (RS-232C compliant) | D-sub 9 pin x 1 for external control (RS-232C compliant) |
Terminals | Serial Out | D-sub 9 pin x 1 for link control | D-sub 9 pin x 1 for link control | D-sub 9 pin x 1 for link control (RS-232C compliant) |
Terminals | Remote 1 In | M3 stereo mini jack x 1 for wired remote control | M3 stereo mini jack x 1 for wired remote control | M3 stereo mini jack x 1 for wired remote control |
Terminals | Remote 1 Out | M3 stereo mini jack x 1 for link control | M3 stereo mini jack x 1 for link control | M3 stereo mini jack x 1 for link control |
Terminals | Remote 2 In | D-sub 9 pin x 1 for external control (parallel) | D-sub 9 pin x 1 for external control (parallel) | D-sub 9 pin x 1 for external control (parallel) |
Terminals | DIGITAL LINK | RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX,
compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP) | RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX,
compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP) | RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX,compatible with Art-Net, PJLink? (class 1), Deep Color, HDCP) |
Terminals | DC Out | USB connector (type A) x 2 for power supply only (DC 5V, Max.900mA) | USB connector (type A) x 2 for power supply only (DC 5V, Max.900mA) | USB connector (type A) x 2 for power supply only (DC 5V, Max.900mA) |
Terminals | Expansion Slot | x 2 (SLOT 1, SLOT 2), SLOT NX(Compatible with Optional Board) | ||
Power Supply | AC 100-120 V, 50/60 Hz; AC 200-240 V, 50/60 Hz | AC 100-120 V, 50/60 Hz; AC 200-240 V, 50/60 Hz | 100 V - 120 V / 200 V - 240 V - (100 V - 120 V / 200 V - 240 V alternating current), 50 Hz/60 Hz (PT-RQ32K)
200 V - 240 V - (200 V - 240 V alternating current) |
Power Consumption | 2,870 W (2,870 VA AC200V)
Average power consumption
(Varies depending on operation mode setting.)
HIGH: 2,310W NORMAL: 1,890W
LONG LIFE 1: 1,040-1,680W
LONG LIFE 2: 924-1,580W
LONG LIFE 3: 794-1,460W
*Operating Temperature: 25 °C (77 °F),
Altitude: 700m (2,297ft), IEC627087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic contrast [2]
0.3 W with STANDBY MODE set to ECO
4 W with STANDBY MODE set to NORMAL | 2,870 W (2,870 VA AC200V)
Average power consumption
Varies depending on operation mode setting.)
HIGH: 2,310W NORMAL: 1,890W
LONG LIFE 1: 1,040-1,680W
LONG LIFE 2: 924-1,580W
LONG LIFE 3: 794-1,460W
*Operating Temperature: 25 °C (77 °F),
Altitude: 700m (2,297ft), IEC627087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic contrast [2]
0.3 W with STANDBY MODE set to ECO
4 W with STANDBY MODE set to NORMAL | 50 Hz/60 Hz (PT-RQ32KD)
2,950 W (12 A/16 A) (PT-RQ32K)
2,950 W (16.1 A) (PT-RQ32KD)
Average power consumption
Varies depending on operation mode setting.)
HIGH: 2,400W NORMAL: 2,000W
LONG LIFE 1: 1,190-1,780W
LONG LIFE 2: 1,060-1,700W
LONG LIFE 3: 926-1,580W
*Operating Temperature: 25,
Altitude: 700m (2,297ft), IEC627087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic contrast [2]
0.3 W with STANDBY MODE set to ECO*1
4 W with STANDBY MODE set to NORMAL |
Cabinet Materials | Processed metal parts, Molded plastic | Processed metal parts, Molded plastic | Processed metal parts, Molded plastic |
Operating Temperature | Varies depending on operation mode setting.
HIGH/NORMAL
The operating temperature range is 0°C to 50°C (32 °F to 122 °F).
(Less than 1,400m (4,593 ft) above sea level)
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Less than 1,400m (4,593 ft) to 4,200m (13,780 ft) above sea level)
• If using at ambient operating temperatures of 35 °C (95 °F) or higher and at
less than 2,700m (8,858 ft) above sea level, or at ambient operating
temperatures of 25 °C (77 °F) or higher and between 2,700m (8,858 ft) and
4,200m (13,780 ft) above sea level, the brightness of the light source may
drop in order to protect the projector.
LONG LIFE 1/2/3
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Less than 2,700m (8,858 ft) above sea level)
• If using at ambient operating temperatures of 35 °C (95 °F) or higher,
the brightness of the light source may drop in order to protect the projector.
When using a smoke cut
lter (regardless of operating mode)
0 °C to 40 °C (32 °F to 104 °F) Less than 1,400 m (4,953 ft) above sea level | Varies depending on operation mode setting.
HIGH/NORMAL
The operating temperature range is 0°C to 50°C (32 °F to 122 °F).
(Less than 1,400m (4,593 ft) above sea level)
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Less than 1,400m (4,593 ft) to 4,200m (13,780 ft) above sea level)
• If using at ambient operating temperatures of 35 °C (95 °F) or higher and at
less than 2,700m (8,858 ft) above sea level, or at ambient operating
temperatures of 25 °C (77 °F) or higher and between 2,700m (8,858 ft) and
4,200m (13,780 ft) above sea level, the brightness of the light source may
drop in order to protect the projector.
LONG LIFE 1/2/3
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Less than 2,700m (8,858 ft) above sea level)
• If using at ambient operating temperatures of 35 °C (95 °F) or higher,
the brightness of the light source may drop in order to protect the projector.
When using a smoke cut
lter (regardless of operating mode)
0 °C to 40 °C (32 °F to 104 °F) Less than 1,400 m (4,953 ft) above sea level | Varies depending on operation mode setting.
HIGH/NORMAL
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Less than 1,400m (4,593 ft) above sea level)
The operating temperature range is 0°C to 40°C (32 °F to 104 °F).
(Less than 1,400m (4,593 ft) to 4,200m (13,780 ft) above sea level)
• If using at ambient operating temperatures of 35 °C (95 °F) or higher and at
less than 2,700m (8,858 ft) above sea level, or at ambient operating
temperatures of 25 °C (77 °F) or higher and between 2,700m (8,858 ft) and
4,200m (13,780 ft) above sea level, the brightness of the light source may
drop in order to protect the projector.
LONG LIFE 1/2/3
The operating temperature range is 0°C to 40°C (32 °F to 104 °F).
(Less than 2,700m (8,858 ft) above sea level)
• If using at ambient operating temperatures of 35 °C (95 °F) or higher,
the brightness of the light source may drop in order to protect the projector.
When using a smoke cut
lter (regardless of operating mode)
0 °C to 40 °C (32 °F to 104 °F) Less than 1,400 m (4,953 ft) above sea level |
Dimensions | 700 x 418*8x1,250 mm
(27-9/16 x 16-15/32 x 49-7/32 inches) (with protrusion parts)
700 x 373*9x1,070 mm
(27-9/16 x 14-11/16 x 42-1/8 inches) (without protrusion parts) | 700 x 418*8x1,250 mm
(27-9/16 x 16-15/32 x 49-7/32 inches) (with protrusion parts)
700 x 373*9x1,070 mm
(27-9/16 x 14-11/16 x 42-1/8 inches) (without protrusion parts) | 700 x 418*6x1,250 mm
(27-9/16 x 16-15/32 x 49-7/32 inches) (with protrusion parts)
700 x 373*7x1,070 mm
(27-9/16 x 14-11/16 x 42-1/8 inches) (without protrusion parts) |
Weight | 79 kg (174.2 lbs) | 79 kg (174.2 lbs) | 83 kg (183 lbs) |
Accessories & Software
Digital Interface Box
ET-YFB100G
By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.
Showing 1 of 1
Digital Interface Box
ET-YFB100G
By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.
Showing 1 of 1
Lenses for 3-Chip DLP < 35.000 lumens
ET-D3LEU101
Deliver Spectacular Images at Short Distance with New Zero-Offset Lenses
Lenses for 3-Chip DLP < 35.000 lumens
ET-D3LEW201
Deliver Spectacular Images at Short Distance with New Zero-Offset Lenses
Lenses for 3-Chip DLP < 35.000 lumens
ET-D3LEF70
Fisheye lens for 3-Chip DLP projectors perfect for dome and planetarium projection
Showing 3 of 3
Filters
ET-EMFU330
The Replacement Long-life filter is designed for compatibility with PT-RZ31, PT-RS30, PT-RQ32 projectors.
Showing 1 of 1
Related resources
Showing 12 of 16
Showing 12 of 49
Showing 12 of 17
Sorry there was an error...
The files you selected could not be downloaded as they do not exist.
You selected items.
Continue to select additional items or download selected items together as a zip file.
You selected 1 item.
Continue to select additional items or download the selected item directly.
Share page
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: