PT-DS20K2

Discontinued

3DLP - 20000 lumens - SXGA+ - 4Lamps - Exchangeable lens - 3D /HD-SDI / Geometry Manager Pro / High Frame Rate 120 Hz, Portrait Mode, Digital Link

Key features

3-chip DLP, 20000 lumens, SXGA+
120Hz high frame rate for superb and sharp motion pictures
Compact design, light weight and low noise level (as low as 46db)
Quad-lamp redundancy for failsafe operation
Fully featured for single or multi-mapping installations

Compact 20.000lm*1Projector Delivers Stunning Picture Quality with High Frame-Rate*2

  • 20.000lm*1 of Brightness with a contrast ratio of 10.000:1 from an extraordinarily compact body
  • Real motion processor combines frame-creation and 120 Hz processing for fluid motion reproduction*2
  • Providing a variety of advanced features, such as 3D projection capability*3, DIGITAL LINK connectivity, portrait mode capability, Geometric Adjustment*4 and multi-screen projection

*1 17,000 lm for the PT-DW17K2, and 16,000 lm for the PT-DZ16K2, *2 Featured on the PT-DZ21K2/DS20K2/DZ16K2 only, *3 Featured on the PT-DZ21K2/DS20K2 only. *4 Featured on the PT-DZ21K2/DS20K2/DW17K2 only.

Benefits of PT-DS20K2:

1. Ultra High and Detailed Images

  • 20,000 lm of brightness (PT-DW17K2: 17,000 lm, PT-DZ16K2: 16,000 lm) for large venues.
  • Real Motion Processor combines Frame-Creation and 120 Hz processing for fluid motion reproduction (PT-DZ21K2/DS20K2/DZ16K2).
  • Next-generation Detail Clarity Processor delivers crisp and detailed image quality.
  • High 10,000:1*1 contrast ratio with Dynamic Iris.
  • System Daylight View 3 for enhanced color performance in bright rooms and mapping applications.
  • Waveform Monitor function for easy adjustment of black/white level.
  • DICOM Simulation mode for medical presentations and training*2.
  • Active 3D projection capability (PT-DZ21K2/DS20K2).

2. High Reliability and Low TCO

  • Extended lamp replacement cycle of 3,000 hours*3.
  • Liquid cooling with highly efficient quad-lamp system reduces operational noise.
  • Stable operation in ambient temperatures of up to 45 ° C*4.
  • Quad-lamp system allows 24/7 operation in Lamp Relay mode.
  • Easy lamp replacement from rear side.
  • Eco filter requires no maintenance for 12,000 hours*5.
  • Durable, precision-tuned optical engine.
  • High efficiency lamps reduce power consumption.

3. Versatile Installation Flexibility

  • Flexible installation with 360 ° vertical cabinet rotation.
  • Multi-Screen Support System seamlessly joins screens with Edge blending, Color matching, and Digital image enlarging.
  • Geometric Adjustment for projection on curved or spherical surfaces (PT-DZ21K2/DS20K2).
  • Multi-Unit Brightness Control.
  • Compatible with Panasonic Multi Monitoring & Control Software and Early Warning Software.
  • Single-cable DIGITAL LINK connection transmits video and control signals for up to 100 m (328 ft).
  • Portrait mode capability (PT-DZ21K2/DS20K2/DW17K2. Mounting the optional lamp units for portrait mode is required)*6.
  • Abundant terminals including 3G-SDI inputs (PT-DZ21K2/DS20K2 features inputs x 2 and PT-DZ16K2 has input x 1).

*1 Full on/off, with Dynamic Iris set to “3”, *2 This product is not a medical instrument. Do not use for actual medical diagnosis, *3 Usage environment affects lamp replacement cycle, *4 Operating temperature range is 0-40 °C (32-104 °F) when projector is used in Portrait mode or High Altitude mode for altitudes 1,400-2,700 m (4,593-8,858 ft).
Operating temperature range is 0-35 °C (32-95 °F) when projector used in Portrait mode in High Altitude mode, *5 Usage environment affects filter replacement cycle, *6 Installation is possible only with the terminal side facing downward. Horizontal rotation and vertical rotation are both limited to 15 °, Additionally, lamp life is reduced to 700 hours depending on usage environment.

Specifications table

Brightness20000 lumens (four lamp)
Resolution1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Technology3-Chip DLP

Product series

PT-DZ21K2 series

 
PT-DZ21K2 series
Model
Lens test
Optional powered zoom/focus lenses
Optional powered zoom/focus lenses
Projector Type
432 W UHM lamps (x 4) (four lamp system)
432 W UHM lamps (x 4) (four lamp system)
DLP™ Chip | Panel Size
24.1 mm (0.95 inches) diagonal (16:9 aspect ratio)
21.6 mm (0.85 inches) diagonal (16:9 aspect ratio)
DLP™ Chip | Display Method
DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip x 3 ( R, G, B), DLP™ projection system
DLP™ chip | Number of Pixels
2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels
1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels
Brightness
16,000 lumens (four lamp)
17,000 lumens (four lamp)
20000 lumens (four lamp)
Resolution
1,920 x 1,080 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,080 pixels.)
1,366 x 768 pixels (Input signals that exceed this resolution converted to 1,366 x 768 pixels.)
1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Contrast Ratio
10,000:1 (full on/full off, in dynamic iris 3 mode)
10,000:1 (full on/full off, in dynamic iris 3 mode)
Screen Size
1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8 tele), (1.78-7.62 m(70 - 300 inches) with the ET-D75LE5, 16:9 aspect ratio
1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:9 aspect ratio
Optical Axis Shift | Vertical
±60% (±50% with the ET-D75LE6, +75-+88% with the ET-D75LE90) from center of screen, powered
±70% (±60% with the ET-D75LE6, +78-+96% with the ET-D75LE90) from center of screen, powered
Optical Axis Shift | Horizontal
±20% (±15% with the ET-D75LE6, -12-+14% with the ET-D75LE90) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
±30% (±20% with the ET-D75LE6, -13-+27% with the ET-D75LE90) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Lens
Optional powered zoom/focus lenses
Optional powered zoom/focus lenses
Installation
Ceiling/・or, front/rear
Ceiling/floor, front/rear
Terminals | SDI In
BNC x 1, 3G-SDI signal: SMPTE ST 424 compliant Dual-link HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
Terminals | HDMI In
HDMI 19-pin x 1, Deep Color, compatible with HDCP
HDMI 19-pin x 1, Deep Color, compatible with HDCP
Terminals | DVI-D In
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single l ink only
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals | RGB 1 In
BNC x 5
BNC x 5
Terminals | RGB 1 In | R, G, B
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 2 In
D-sub HD 15-pin (female) x 1
D-sub HD 15-pin (female) x 1
Terminals | RGB 2 In | R, G, B
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR)
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | Serial In
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | Serial Out
D-sub 9-pin (male) x 1 for link control
D-sub 9-pin (male) x 1 for link control
Terminals | Remote 1 In
M3 jack x 1 for wired remote control
M3 jack x 1 for wired remote control
Terminals | Remote 1 Out
M3 jack x 1 for link control
M3 jack x 1 for link control
Terminals | Remote 2 In
D-sub 9-pin (female) x 1 for external c ontrol (parallel)
D-sub 9-pin (female) x 1 for external control (parallel)
Terminals | DIGITAL LINK
RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible Deep Color, compatible with HDCP
RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible Deep Color, compatible with HDCP
Power Supply
200 - 240 V AC, 12 A, 50/60 Hz (3-wire single-phase)
200 - 240 V AC, 12 A , 50/60 Hz ( 3-wire single-phase)
Power Consumption
2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU (without light output: 6,758 BTU )
2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU ( without light o utput: 6,758 BTU )
Cabinet Materials
Molded plastic
Molded plastic
Operation Noise
46 dB (quad lamp operation)
46 dB (quad lamp operation)
Operating Temperature
0°- 45°C (32°- 113°F)
0°- 45°C (32°- 113°F)
Dimensions
620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)
620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)
Weight
Approx. 41 kg (90.4 lbs) (without lens)
Approx. 41 kg (90.4 lbs) (without lens)

Accessories & Software

Lenses for 3-Chip DLP < 35.000 lumens

ET-D75LE6

0.9-1.1:1 throw ratio (WUXGA) Zoom Lens for 3-Chip DLP Projectors

Lenses for 3-Chip DLP < 35.000 lumens

ET-D75LE8

7.3-13.8:1 throw ratio (WUXGA) Zoom Lens for 3-Chip DLP Projectors 

Lenses for 3-Chip DLP < 35.000 lumens

ET-D75LE10

1.3-1.7:1 throw ratio (WUXGA) Zoom Lens for 3-Chip DLP Projectors  

Lenses for 3-Chip DLP < 35.000 lumens

ET-D75LE20

1.67 - 2.4:1throw ratio (WUXGA) Zoom Lens for 3-Chip DLP Projectors

Showing 4 of 10

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

Showing 1 of 1

Lamps

ET-LAD520

UHM lamp x 1

Lamps

ET-LAD520PF

UHM lamp x 4, For portrait mode

Showing 2 of 2

Filters

ET-EMF510

Eco filter

Showing 1 of 1

Geometry Manager Pro

ET-UK20

Geometric adjustment option for 3D mapping and complex projection adjustments.

Showing 1 of 1

Autoscreen Adjustment

ET-CUK10_CUK10P

Expends Geometry Manager Pro software allowing automatic adjustment of multi-screen or curved-screen projections.

Showing 1 of 1

Software

Multi Monitoring and Control Software

Remote control, monitoring, and live status reporting about your projectors and displays fleet from an intranet.

Showing 1 of 1

Brackets

ET-PKD520S

The Low ceiling mount bracket is designed for compatibility with PT-DZ21K2E, PT-DS20K2E, PT-DW17K2E, PT-DZ16K2, PT-RZ12K, PT-RQ13K projectors.

Showing 1 of 1

Related resources

Showing 4 of 36

Showing 4 of 11

Showing 4 of 5

Showing 4 of 10