PT-DS20K2

Discontinued

3DLP - 20000 lumens - SXGA+ - 4Lamps - Exchangeable lens - 3D /HD-SDI / Geometry Manager Pro / High Frame Rate 120 Hz, Portrait Mode, Digital Link

View full specifications Share page

Key features

3-chip DLP, 20000 lumens, SXGA+

120Hz high frame rate for superb and sharp motion pictures

Compact design, light weight and low noise level (as low as 46db)

Quad-lamp redundancy for failsafe operation

Fully featured for single or multi-mapping installations

Compact 20.000lm1Projector Delivers Stunning Picture Quality with High Frame-Rate2

20.000lm^*1 of Brightness with a contrast ratio of 10.000:1 from an extraordinarily compact body
Real motion processor combines frame-creation and 120 Hz processing for fluid motion reproduction^*2
Providing a variety of advanced features, such as 3D projection capability^*3, DIGITAL LINK connectivity, portrait mode capability, Geometric Adjustment^*4 and multi-screen projection

^{*1 17,000 lm for the PT-DW17K2, and 16,000 lm for the PT-DZ16K2, *2 Featured on the PT-DZ21K2/DS20K2/DZ16K2 only, *3 Featured on the PT-DZ21K2/DS20K2 only. *4 Featured on the PT-DZ21K2/DS20K2/DW17K2 only.}

Benefits of PT-DS20K2:

1. Ultra High and Detailed Images

20,000 lm of brightness (PT-DW17K2: 17,000 lm, PT-DZ16K2: 16,000 lm) for large venues.
Real Motion Processor combines Frame-Creation and 120 Hz processing for fluid motion reproduction (PT-DZ21K2/DS20K2/DZ16K2).
Next-generation Detail Clarity Processor delivers crisp and detailed image quality.
High 10,000:1^*1 contrast ratio with Dynamic Iris.
System Daylight View 3 for enhanced color performance in bright rooms and mapping applications.
Waveform Monitor function for easy adjustment of black/white level.
DICOM Simulation mode for medical presentations and training^*2.
Active 3D projection capability (PT-DZ21K2/DS20K2).

Show more Show less

2. High Reliability and Low TCO

Extended lamp replacement cycle of 3,000 hours^*3.
Liquid cooling with highly efficient quad-lamp system reduces operational noise.
Stable operation in ambient temperatures of up to 45 ° C^*4.
Quad-lamp system allows 24/7 operation in Lamp Relay mode.
Easy lamp replacement from rear side.
Eco filter requires no maintenance for 12,000 hours^*5.
Durable, precision-tuned optical engine.
High efficiency lamps reduce power consumption.

3. Versatile Installation Flexibility

Flexible installation with 360 ° vertical cabinet rotation.
Multi-Screen Support System seamlessly joins screens with Edge blending, Color matching, and Digital image enlarging.
Geometric Adjustment for projection on curved or spherical surfaces (PT-DZ21K2/DS20K2).
Multi-Unit Brightness Control.
Compatible with Panasonic Multi Monitoring & Control Software and Early Warning Software.
Single-cable DIGITAL LINK connection transmits video and control signals for up to 100 m (328 ft).
Portrait mode capability (PT-DZ21K2/DS20K2/DW17K2. Mounting the optional lamp units for portrait mode is required)^*6.
Abundant terminals including 3G-SDI inputs (PT-DZ21K2/DS20K2 features inputs x 2 and PT-DZ16K2 has input x 1).

^{*1 Full on/off, with Dynamic Iris set to “3”, *2 This product is not a medical instrument. Do not use for actual medical diagnosis, *3 Usage environment affects lamp replacement cycle, *4 Operating temperature range is 0-40 °C (32-104 °F) when projector is used in Portrait mode or High Altitude mode for altitudes 1,400-2,700 m (4,593-8,858 ft).}
^{Operating temperature range is 0-35 °C (32-95 °F) when projector used in Portrait mode in High Altitude mode, *5 Usage environment affects filter replacement cycle, *6 Installation is possible only with the terminal side facing downward. Horizontal rotation and vertical rotation are both limited to 15 °, Additionally, lamp life is reduced to 700 hours depending on usage environment.}

Product gallery

Specifications table

Brightness	20000 lumens (four lamp)
Resolution	1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Technology	3-Chip DLP

View full specifications

Product series

PT-DZ21K2 series

PT-DZ21K2 series
Model	PT-DZ16K2	PT-DW17K2	PT-DS20K2
Lens test	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses
Projector Type	432 W UHM lamps (x 4) (four lamp system)	432 W UHM lamps (x 4) (four lamp system)
DLP™ Chip \| Panel Size	24.1 mm (0.95 inches) diagonal (16:9 aspect ratio)	21.6 mm (0.85 inches) diagonal (16:9 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 3 (R, G, B), DLP™ projection system	DLP™ chip x 3 ( R, G, B), DLP™ projection system
DLP™ chip \| Number of Pixels	2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels	1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels
Brightness	16,000 lumens (four lamp)	17,000 lumens (four lamp)	20000 lumens (four lamp)
Resolution	1,920 x 1,080 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,080 pixels.)	1,366 x 768 pixels (Input signals that exceed this resolution converted to 1,366 x 768 pixels.)	1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Contrast Ratio	10,000:1 (full on/full off, in dynamic iris 3 mode)	10,000:1 (full on/full off, in dynamic iris 3 mode)
Screen Size	1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8 tele), (1.78-7.62 m(70 - 300 inches) with the ET-D75LE5, 16:9 aspect ratio	1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:9 aspect ratio
Optical Axis Shift \| Vertical	±60% (±50% with the ET-D75LE6, +75-+88% with the ET-D75LE90) from center of screen, powered	±70% (±60% with the ET-D75LE6, +78-+96% with the ET-D75LE90) from center of screen, powered
Optical Axis Shift \| Horizontal	±20% (±15% with the ET-D75LE6, -12-+14% with the ET-D75LE90) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.	±30% (±20% with the ET-D75LE6, -13-+27% with the ET-D75LE90) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Lens	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses
Installation	Ceiling/・or, front/rear	Ceiling/floor, front/rear
Terminals \| SDI In	BNC x 1, 3G-SDI signal: SMPTE ST 424 compliant Dual-link HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
Terminals \| HDMI In	HDMI 19-pin x 1, Deep Color, compatible with HDCP	HDMI 19-pin x 1, Deep Color, compatible with HDCP
Terminals \| DVI-D In	DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single l ink only	DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals \| RGB 1 In	BNC x 5	BNC x 5
Terminals \| RGB 1 In \| R, G, B	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 1 In \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| RGB 2 In	D-sub HD 15-pin (female) x 1	D-sub HD 15-pin (female) x 1
Terminals \| RGB 2 In \| R, G, B	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 2 In \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| Serial In	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| Serial Out	D-sub 9-pin (male) x 1 for link control	D-sub 9-pin (male) x 1 for link control
Terminals \| Remote 1 In	M3 jack x 1 for wired remote control	M3 jack x 1 for wired remote control
Terminals \| Remote 1 Out	M3 jack x 1 for link control	M3 jack x 1 for link control
Terminals \| Remote 2 In	D-sub 9-pin (female) x 1 for external c ontrol (parallel)	D-sub 9-pin (female) x 1 for external control (parallel)
Terminals \| DIGITAL LINK	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible Deep Color, compatible with HDCP	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible Deep Color, compatible with HDCP
Power Supply	200 - 240 V AC, 12 A, 50/60 Hz (3-wire single-phase)	200 - 240 V AC, 12 A , 50/60 Hz ( 3-wire single-phase)
Power Consumption	2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU (without light output: 6,758 BTU )	2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU ( without light o utput: 6,758 BTU )
Cabinet Materials	Molded plastic	Molded plastic
Operation Noise	46 dB (quad lamp operation)	46 dB (quad lamp operation)
Operating Temperature	0°- 45°C (32°- 113°F)	0°- 45°C (32°- 113°F)
Dimensions	620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)	620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)
Weight	Approx. 41 kg (90.4 lbs) (without lens)	Approx. 41 kg (90.4 lbs) (without lens)

Accessories & Software

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

View product

Key Features
Simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Transmission up to 100m
Abundant input terminals, including two sets of HDMI and RGB inputs.
A separate audio output enables sound to be output when the display power is turned off.
ET-YFB100G input can be selected with the remote control of a Panasonic display with DIGITAL LINK compatibility.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

View product

Key Features
Simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Transmission up to 100m
Abundant input terminals, including two sets of HDMI and RGB inputs.
A separate audio output enables sound to be output when the display power is turned off.
ET-YFB100G input can be selected with the remote control of a Panasonic display with DIGITAL LINK compatibility.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

View product

Key Features
Long-distance DIGITAL LINK transmission of up to 150 m through a single LAN cable
Lower cabling costs and reduced wiring complexity
Self-contained with integrated splitter, switcher, scaler, and DIGITAL LINK conversion technology
Connect multiple ET-YFB200G switchers to accommodate extra display devices
Compact half-rack dimensions

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

View product

Key Features
Long-distance DIGITAL LINK transmission of up to 150 m through a single LAN cable
Lower cabling costs and reduced wiring complexity
Self-contained with integrated splitter, switcher, scaler, and DIGITAL LINK conversion technology
Connect multiple ET-YFB200G switchers to accommodate extra display devices
Compact half-rack dimensions

Showing 1 of 1

Lamps

ET-LAD520

UHM lamp x 1

View product

Lamps

ET-LAD520PF

UHM lamp x 4, For portrait mode

View product

Showing 2 of 2

Lenses for 3-Chip DLP < 35.000 lumens

ET-D75MC1

Lens motor cover for 3-DLP projectors

View product

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEF70

Fisheye lens for 3-Chip DLP projectors perfect for dome and planetarium projection

View product

Key Features
Compatible with high-brightness 3-chip DLP projectors up to 30,000 lm brightness
Supports WQXGA (4K+) ultra-high-resolution image projection
Installation flexibility is supported by wide lens-shift (vertical: up to ± 37 %, horizontal: up to ± 17 %).
Adapted for dome-theater applications in planetariums, video domes at exhibitions, or theme-park attractions

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEW50

0.7:1 throw ratio (WUXGA) Fixed-focus Lens for 3-Chip DLP Projectors

View product

Showing 3 of 3

Filters

ET-EMF510

Eco filter

View product

Showing 1 of 1

Geometry Manager Pro

ET-UK20

Geometric adjustment option for 3D mapping and complex projection adjustments.

View product

Key Features
Complements the Geometric Manager Pro software included in Panasonic high brightness projectors.
Supports custom masking, uniformity correction, and other useful functions for multi-projector setups (up to 64 units).
Suits a wide variety of screen shapes.

Showing 1 of 1

Autoscreen Adjustment

ET-CUK10_CUK10P

Expends Geometry Manager Pro software allowing automatic adjustment of multi-screen or curved-screen projections.

View product

Key Features
Edge blending, colour-matching, brightness control, and geometry adjustment are achieved easily and quickly using with external compatible cameras and Geometry Manager Pro software.

Showing 1 of 1

Software

Multi Monitoring and Control Software

Remote control, monitoring, and live status reporting about your projectors and displays fleet from an intranet.

View product

Key Features
Status of up to 2 048 devices can be checked from a single PC.
Easily manage groups of devices by “Group” or “Keyword” categories according to location or application.
Scheduled commands can be executed for a selected device or for multiple devices. Functions include control commands, image distribution, projector brightness control, delivery of a content list, Light ID control, and more.
Distribute media from a content playlist, including stills and video, from PC to selected projectors and displays. LinkRay™ Light ID transmission is also supported on selected devices.
Expend your possibilities by addding Early Warning software and add predictive maintenance and alert functions to your monitoring system.

Showing 1 of 1

Brackets

ET-PKD520S

The Low ceiling mount bracket is designed for compatibility with PT-DZ21K2E, PT-DS20K2E, PT-DW17K2E, PT-DZ16K2, PT-RZ12K, PT-RQ13K projectors.

View product

Showing 1 of 1

PT-DS20K2

Key features

Compact 20.000lm*1Projector Delivers Stunning Picture Quality with High Frame-Rate*2

Benefits of PT-DS20K2:

1. Ultra High and Detailed Images

3. Versatile Installation Flexibility

Product gallery

Specifications table

Product series

Accessories & Software

ET-YFB100G

ET-YFB100G

ET-YFB200G

ET-YFB200G

ET-LAD520

ET-LAD520PF

ET-D75MC1

ET-D3LEF70

ET-D3LEW50

ET-EMF510

ET-UK20

ET-CUK10_CUK10P

Multi Monitoring and Control Software

ET-PKD520S

Related resources

Compact 20.000lm1Projector Delivers Stunning Picture Quality with High Frame-Rate2