50,000 lumen 4K+ Solid Shine Laser Projector

PT-RQ50K

World’s most compact 50,000 lumen Laser Projector with Native 4K Resolution

View full specifications Dela sida

Key features of PT-RQ50K

Viktiga funktioner

Laser 3-chip DLP, 50,000 lumens, Native 4K

Lamp-free laser projection with hermetically sealed optics and filter-less design, for 20,000 hours maintenance free operation

Compact body allows for simplified transport, install and adjustment

Dualised design provides the ultimate in backup and reliability

20,000:1 contrast ratio...

 PT-RQ50
Brightness51 000 center lumen / 50 000 lumen
ResolutionNative 4K
Contrast20 000:1

Specifications of PT-RQ50K

Tabell med specifikationer

Projector type	3-Chip DLP^TMprojector
Display method	DLP^TM chip x 3, DLP^TM projection system
Display Device -> Panel size	35.1 mm (1.38 in) diagonal (17:9 aspect ratio)
Display Device -> Number of pixels	8,847,360 (4096 x 2160 pixels) x 3
Light source	Laser diodes (Blue LD, Red LD)
Light output	50,000 lm
Light output (ANSI)	50,000 lm
Light output (Center)	51,000 lm (Center)

View full specifications

Tillbehör och programvara

Lenses for 3-Chip DLP > 35.000 lumens

ET-D3QS400

1.4-2.1:1 Throw Ratio 3-Chip DLP™ Zoom Lens for PT-RQ50 projector with Lens Memory and Stepping Motor

Lenses for 3-Chip DLP > 35.000 lumens

ET-D3QT500

2.0-3.4:1 Throw Ratio 3-Chip DLP™ Zoom Lens for PT-RQ50 projector with Lens Memory and Stepping Motor

Lenses for 3-Chip DLP > 35.000 lumens

ET-D3QT600

2.69~3.88:1 throw ratio (Aspect 17:9) Zoom Lens for the PT-RQ50K

Lenses for 3-Chip DLP > 35.000 lumens

ET-D3QT700

3.9-5.5:1 Throw Ratio 3-Chip DLP™ Zoom Lens for PT-RQ50 projector with Lens Memory and Stepping Motor

Lenses for 3-Chip DLP > 35.000 lumens

ET-D3QT800

5.0-7.1:1 Throw Ratio 3-Chip DLP™ Zoom Lens for PT-RQ50 projector with Lens Memory and Stepping Motor

Lenses for 3-Chip DLP > 35.000 lumens

ET-D3QW300

1.1-1.7:1 Throw Ratio 3-Chip DLP™ Zoom Lens for PT-RQ50 projector with Lens Memory and Stepping Motor

Showing 6 of 6

Interface board/conversion cable

ET-MDNDV10

DVI-D input signal board

Interface board/conversion cable

ET-MDN12G10

12G-SDI signal board

Interface board/conversion cable

ET-MDNFB10

ET-MDNFB10

Key Features
Eliminating additional optical fiber to SDI convertor at projector side
The direct optical fiber connection can reach up to 10km distance for 4K signal
Compatible with HD-SDI, 3G-SDI, 6G-SDI, 12G-SDI
Ideal for environments where long distance and stable connection is required

Showing 3 of 3

Frames

ET-RFD80

The Rental Frame is designed for compatibility with PT-RQ50 projector.

Showing 1 of 1

Media Processor

ET-FMP20

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

Showing 1 of 1

Media Processor

ET-FMP20

Media Processors Simplify Multi-Projection Workflows for Immersive Experiences

Showing 1 of 1

Digital Interface Box

ET-YFB100G

ET-YFB100G. .

Key Features
Simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Transmission up to 100m
Abundant input terminals, including two sets of HDMI and RGB inputs.
A separate audio output enables sound to be output when the display power is turned off.
ET-YFB100G input can be selected with the remote control of a Panasonic display with DIGITAL LINK compatibility.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

ET-YFB100G. .

Key Features
Simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Transmission up to 100m
Abundant input terminals, including two sets of HDMI and RGB inputs.
A separate audio output enables sound to be output when the display power is turned off.
ET-YFB100G input can be selected with the remote control of a Panasonic display with DIGITAL LINK compatibility.

Showing 1 of 1

Early Warning System

ET-SWA100

Monitors projectors and displays through intranet and detects or predicts abnormality or symptoms of trouble. Minimizes downtime and saves time and costs.

Key Features
Up to 2048 devices can be monitored remotely from PC or tablet web browser.
Advance notice of required maintenance
Trouble prediction detection
Quick response when problems occur
Record the operating conditions of each device and, based on the operating hours, it can predict when consumable parts will be required, regular periodic cleaning will be necessary, and non-consumable parts will need to be replaced.

Showing 1 of 1

Software

Multi Monitoring and Control Software

Remote control, monitoring, and live status reporting about your projectors and displays fleet from an intranet.

Key Features
Status of up to 2 048 devices can be checked from a single PC.
Easily manage groups of devices by “Group” or “Keyword” categories according to location or application.
Scheduled commands can be executed for a selected device or for multiple devices. Functions include control commands, image distribution, projector brightness control, delivery of a content list, Light ID control, and more.
Distribute media from a content playlist, including stills and video, from PC to selected projectors and displays. LinkRay™ Light ID transmission is also supported on selected devices.
Expend your possibilities by addding Early Warning software and add predictive maintenance and alert functions to your monitoring system.

Showing 1 of 1

Lenses for 3-Chip DLP < 35.000 lumens

ET-D75MC1

Lens motor cover for 3-DLP projectors

Showing 1 of 1

Full specifications

Download specifications

Projector type	3-Chip DLP^TMprojector
Display method	DLP^TM chip x 3, DLP^TM projection system
Display Device -> Panel size	35.1 mm (1.38 in) diagonal (17:9 aspect ratio)
Display Device -> Number of pixels	8,847,360 (4096 x 2160 pixels) x 3
Light source	Laser diodes (Blue LD, Red LD)
Light output	50,000 lm
Light output (ANSI)	50,000 lm
Light output (Center)	51,000 lm (Center)
Time until light output declines to 50 % -> NORMAL	20,000 hours [NORMAL]
Time until light output declines to 50 % -> ECO	24,000 hours [ECO]
Resolution	Native 4K (4096 x 2160 pixels)
Contrast Ratio (typ.)	20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Screen size (diagonal)	2.54–38.1 m (100–1,500 in) with new optional lens for PT-RQ50K, 17:9 aspect ratio
Center-to-corner zone ratio	90%
Lens	New optional lenses for PT-RQ50K (no lens included with this model)
Lens shift -> Vertical(from center of screen)	±45 % (±25 % with ET-D3QT600, ±30 % with ET-D3QT700/ET-D3QT800, ±40 % with ET-D3QW300) (powered)
Lens shift -> Horizontal(from center of screen)	±16 % (±8 % with ET-D3QT600, ±10 % with ET-D3QT700/ET-D3QT800, ±14 % with ET-D3QW300) (powered)
Keystone correction range	Vertical: ±40 ° (±28 ° with ET-D3QW300), Horizontal: ±40 ° (±15 ° with ET-D3QW300)
Installation	Horizontal/vertical, free 360-degree installation
Terminals -> MULTI PROJECTOR SYNC IN	BNC x 1
Terminals -> MULTI PROJECTOR SYNC OUT	BNC x 1
Terminals -> SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals -> SERIAL OUT	D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals -> REMOTE 1 IN	M3 stereo mini-jack x 1 for wired remote control
Terminals -> REMOTE 1 OUT	M3 stereo mini-jack x 1 for link control
Terminals -> REMOTE 2 IN	D-sub 9-pin (female) x 1 for external control (parallel)
Terminals -> DIGITAL LINK IN / LAN	RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT^TM compliant), PJLink^TM (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
Terminals -> LAN	RJ-45 x 1 for network connection, PJLink^TM (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals -> DC OUT	USB Connector (Type A) x 2 for power supply only (DC 5 V, total of 2 A)
Terminals -> USB TYPE A	USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series) / USB Memory Stick
Terminals -> SLOT	SLOT1 : Interface Board for 12G-SDI (ET-MDN12G10) supplied SLOT2 : Optional interface boards, SLOT NX compatible
Power supply	AC 200–240 V, 50/60 Hz; AC 100–120 V, 50/60 Hz
Maximum power consumption	4,100 W (AC 100–120 V: 1,100 W)
On-mode power consumption(Operating mode) -> Normal	3,970 W
On-mode power consumption(Operating mode) -> Eco	3,110 W
Standby power consumption -> Normal	6 W
Cabinet materials	Fabricated metal and molded plastic
Filter	No
Operation noise -> Normal	52 dB [NORMAL]
Dimensions (W x H x D)	720 x 445 x 1,070 mm (28 11/32˝ x 17 17/32˝ x 42 1/8˝ ) (excluding handle, adjuster feet, and other protruding parts)
Dimensions (W x H x D) -> Width (not including protruding parts)	720 mm (28 11/32˝)
Dimensions -> Height (not including protruding parts)	445 mm (17 17/32˝)
Dimensions -> Depth (not including protruding parts)	1,070 mm (42 1/8˝)
Weight	Approx. 126 kg (278 lbs) (without lens)
Operating environment -> Operating temperature	0–45 °C (32–113 °F)
Operating Environment -> Operating humidity (No condensation)	10–80 %　（no condensation)
Applicable software	Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android^TM
Footnote Description	When [OPERATING MODE] is set to [NORMAL]. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is the average of all products when shipped. Measurement, measuring conditions, and method of notation all comply with American National Standards Institute standards. Value is the average of all products when shipped. Average light-output value of all shipped products measured at the center of the screen. Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [3], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. Average value. May differ depending on the actual unit. The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft). When optional AJ-WM50 wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F). When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector.