1-Chip DLP™ laser projectors for education and corporate

PT-FRZ50

Easy-to-Manage, Super Simple 1 Chip DLP™ Laser Projector delivers Clear Pictures in Bright Rooms with Flexible Integration in the Classroom or Office

Scroll down

Key features

Laser 1-chip DLP, 5,200 lumens, WUXGA
DLP™ imaging technology, Quartet Color Harmonizer, Rich Color Enhancer, and digitally modulated Dynamic Contrast 2 optimization 
Maintenance free up to 20,000 hours with dust-resistant optical block and long lasting laser engine
Flexible 2.0x zoom lens (1.46 – 2.94:1) with V/H Lens-Shift 
Support uncompressed 4K/60p input signals via HDCP 2.2-compliant HDMI® inputs or DIGITAL LINK terminal
 PT-FRZ60PT-FRZ50PT-FRZ55
Brightness

6,000 lm* (ANSI)/

6,200 lm (Center)

5,200 lm* (ANSI)/

5,400 lm (Center)

5,000 lm* (ANSI)/

5,200 lm (Centre)

ResolutionWUXGAWUXGAWUXGA
Lens2x zoom lens (1.46 – 2.94:1)2x zoom lens (1.46 – 2.94:1)Fixed short throw lens (0.8:1)

Dynamic Colour for Bright Rooms

Brilliant Colour Reproduction

Quartet Colour Harmonizer is an original colour-wheel mechanism featuring optimized optical design. It modulates light-output according to the image’s colour requirements, achieving wide-gamut reproduction with pure white for greater colour accuracy and depth without sacrificing brightness. Combined with stable SOLID SHINE Laser brightness and the superior uniformity of DLP™ imaging, colours appear richer and brighter without the greenish cast sometimes experienced with alternative projection technologies.

 

Rich Colour Enhancer

Rich Colour Enhancer includes a Dynamic Mode that prioritizes image brightness, and a Graphic Mode/Standard Mode to suit graphical content. This mode adjusts colour-wheel timing for deeper colour saturation in situations where projection at maximum brightness is not required.

Quiet, Versatile, and Easy to Install

Wide-Range 2.0x Zoom Lens with Lens-Shift

To smooth the path to stress-free installation, the projectors equip a 2.0x optical zoom lens that supports a wide range of throw-distances while filling your screen with a large, bright image. V/H Lens-Shift (Vertical: +64 %, -44 % and Horizontal: +34 %, -27 %) locates the image on screen when optimal projector placement isn’t possible, such as in rooms with high ceilings or for angled projection applications. The projectors share the same 2.0x zoom lens and lens-shift adjustment as our PT-RZ570 (and will fit the same mounting bracket), making the PT-FRZ60/FRZ50 a streamlined, cost-effective replacement. V/H Keystone Correction (Vertical: ±40 °, Horizontal: ±20 °), curved-screen correction, and Auto Image Rotation function are included to further enhance installation flexibility.

Proven SOLID SHINE Laser Reliability

SOLID SHINE Laser for Dependably High Brightness

PT-FRZ60 and PT-FRZ50 have durable solid-state laser modules in place of a consumable lamp. The benefits of laser projection are emphatically proven, with no need for consumable parts replacement over years of continuous 24/7 projection and a shallower brightness ramp with superior colour uniformity. Experience better picture quality for longer at a comparably lower cost. Another advantage is the ability to switch the unit on and off from the room breaker any time without risking damage to the light-source.

Filterless Cooling and Airtight Optical Block

Implementation of heat-pipe-based cooling with heat-sinks for the DMD block eliminate need for an air filter. These projectors can operate continuously in dusty environments for 20,000 hours without maintenance thanks to a hermetically sealed optical engine that prevents dust intrusion and associated image degradation.

Specifications table

Projector type1-Chip DLP™ projector
DLP™ Chip | Panel Size17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
DLP™ Chip | Display MethodDLP™ chip x 1, DLP™ projection system
DLP™ chip | Number of Pixels2,304,000 (1920 x 1200 pixels)
Light SourceLaser diodes
Light output5,200 lm*1/5,400 lm (Center)*2
Time until light output declines to 50 %*320,000 hours (NORMAL)
Resolution1920 x 1200 pixels

Product series

PT-FRZ60 Series

PT-FRZ60 Series
 
Model
Projector Type
1-Chip DLP™ projector
1-Chip DLP™ projector
1-Chip DLP™ projector
DLP™ Chip | Panel Size
17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
DLP™ Chip | Display Method
DLP™ chip x 1, DLP™ projection system
DLP™ chip x 1, DLP™ projection system
DLP™ Chip | Number of Pixels
2,304,000 (1920 x 1200 pixels)
2,304,000 (1920 x 1200 pixels)
Brightness
5,200 lm*1/5,400 lm (Center)*2
5,000 lm*1/5,200 lm (Center)*2
Light Source
Laser diodes
Laser diodes
Time until light output declines to 50 %
20,000 hours (NORMAL)
20,000 hours (NORMAL)
Resolution
1920 x 1200 pixels
1920 x 1200 pixels
Contrast Ratio
20,000:1 (Full On/Full Off, Dynamic Contrast Mode: ON)
20,000:1 (Full On/Full Off, Dynamic Contrast Mode: ON)
Screen Size
1.02–7.62 m (40–300 in), 16:10 aspect ratio
1.02–7.62 m (40–300 in), 16:10 aspect ratio
Center-to-corner zone ratio
90 %
90 %
Lens
2.0x manual zoom (throw ratio: 1.46–2.94:1), manual focus, F 2.0–3.4, f 21.5–43.0 mm
Fixed (throw ratio: 0.8:1), powered focus, F 1.75, f 11.9 mm
Lens shift | Horizontal(From the origin point of the lens mounter)
+34 %, -27 % (manual)
±2.1 % (powered)
Lens shift | Vertical(From the origin point of the lens mounter)
+64 %, -44 % (manual)
±4.4 % (powered)
Installation
Ceiling/floor, front/rear, free 360-degree installation
Ceiling/floor, front/rear, free 360-degree installation
Terminals | HDMI In
HDMI 19-pin x 2 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*4 ), CEC supported
HDMI 19-pin x 2 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*4 ), CEC supported
Terminals | Serial In
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | DIGITAL LINK
RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible,4K/60p signal input*4
RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible,4K/60p signal input*4
Terminals | LAN
RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals | USB
USB connector (Type A) x 1 (Output 5 V/2 A)
USB connector (Type A) x 1 (Output 5 V/2 A)
Power Supply
AC 100–240 V, 50/60 Hz
AC 100–240 V, 50/60 Hz
Power Consumption
TBD
TBD
TBD
Operation Noise
30 dB (Quiet Mode) (TBD), 35 dB (Normal Mode) (TBD)
27 dB (Quiet Mode) (TBD), 32 dB (Normal Mode) (TBD)
27 dB (Quiet Mode) (TBD), 32 dB (Normal Mode) (TBD)
Operating Environment
Operating temperature: 0–45 °C (32–113 °F),operating humidity: 10–80 % (no condensation) (TBD)
Operating temperature: 0–45 °C (32–113 °F),operating humidity: 10–80 % (no condensation) (TBD)
Cabinet Materials
Molded plastic
Molded plastic
Dimensions
498 x 168*5 x 492 mm (19 5/8˝ x 6 5/8˝*5 x 19 3/8˝ )
498 x 168*5 x 481 mm (19 5/8˝ x 6 5/8˝*5 x 18 15/16˝ )
Weight
Approx. 16.3 kg (35.9 lbs) (TBD)
Approx. 16.6 kg (36.6 lbs) (TBD)
Applicable software/application
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software

Accessories & Software

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

Showing 1 of 1

Brackets

ET-PKD120H

High ceiling mount bracket

Brackets

ET-PKD120S

Low ceiling mount bracket

Brackets

ET-PKD130B

Bracket assembly

Showing 3 of 3

Software

Multi Monitoring and Control Software

Remote control, monitoring, and live status reporting about your projectors and displays fleet from an intranet.

Showing 1 of 1

Interface board/conversion cable

ET-ADSV

D-Sub/S-VIDEO conversion cable

Showing 1 of 1

Related resources

Showing 12 of 18

Sorry there was an error...
The files you selected could not be downloaded as they do not exist.

You selected items.
Continue to select additional items or download selected items together as a zip file.

You selected 1 item.
Continue to select additional items or download the selected item directly.

Download selected file