Breadcrumb
PT-DW17K2
Discontinued3DLP - 17000 lumens - WXGA - 4Lamps - Exchangeable lens - 3D /HD-SDI/ Portrait Mode/ Digital Link/ 10000:1
Key features
3-chip DLP, 17000 lumens, WXGA |
Compact design, light weight and low noise level (as low as 46db) |
Quad-lamp redundancy for failsafe operation |
Fully featured for single or multi-mapping installations |
Compact 17.000lm*1Projector Delivers Stunning Picture Quality
- 17.000lm*1 of Brightness with a contrast ratio of 10.000:1 from an extraordinarily compact body
- Providing a variety of advanced features, such as DIGITAL LINK connectivity, portrait mode capabilityand multi-screen projection
*1 17,000 lm for the PT-DW17K2, and 16,000 lm for the PT-DZ16K2.
Benefits of PT-DW17K2:
1. Ultra High and Detailed Images
- 17,000 lm of brightness (PT-DW17K2: 17,000 lm, PT-DZ16K2: 16,000 lm) for large venues.
- Next-generation Detail Clarity Processor delivers crisp and detailed image quality.
- High 10,000:1*1 contrast ratio with Dynamic Iris.
- System Daylight View 3 for enhanced color performance in bright rooms and mapping applications.
- Waveform Monitor function for easy adjustment of black/white level.
- DICOM Simulation mode for medical presentations and training*2.
2. High Reliability and Low TCO
- Extended lamp replacement cycle of 3,000 hours*3.
- Liquid cooling with highly efficient quad-lamp system reduces operational noise.
- Stable operation in ambient temperatures of up to 45 ° C*4.
- Quad-lamp system allows 24/7 operation in Lamp Relay mode.
- Easy lamp replacement from rear side.
- Eco filter requires no maintenance for 12,000 hours*5.
- Durable, precision-tuned optical engine.
- High efficiency lamps reduce power consumption.
3. Versatile Installation Flexibility
- Flexible installation with 360 ° vertical cabinet rotation.
- Multi-Screen Support System seamlessly joins screens with Edge blending, Color matching, and Digital image enlarging.
- Multi-Unit Brightness Control.
- Compatible with Panasonic Multi Monitoring & Control Software and Early Warning Software.
- Single-cable DIGITAL LINK connection transmits video and control signals for up to 100 m (328 ft).
- Portrait mode capability (PT-DZ21K2/DS20K2/DW17K2. Mounting the optional lamp units for portrait mode is required)*6.
- Abundant terminals including 3G-SDI inputs (PT-DZ21K2/DS20K2 features inputs x 2 and PT-DZ16K2 has input x 1).
*1 Full on/off, with Dynamic Iris set to “3”, *2 This product is not a medical instrument. Do not use for actual medical diagnosis, *3 Usage environment affects lamp replacement cycle, *4 Operating temperature range is 0-40 °C (32-104 °F) when projector is used in Portrait mode or High Altitude mode for altitudes 1,400-2,700 m (4,593-8,858 ft).
Operating temperature range is 0-35 °C (32-95 °F) when projector used in Portrait mode in High Altitude mode, *5 Usage environment affects filter replacement cycle, *6 Installation is possible only with the terminal side facing downward. Horizontal rotation and vertical rotation are both limited to 15 °, Additionally, lamp life is reduced to 700 hours depending on usage environment.
Product gallery
Specifications table
Brightness | 17,000 lumens (four lamp) |
---|---|
Resolution | 1,366 x 768 pixels (Input signals that exceed this resolution converted to 1,366 x 768 pixels.) |
Lamp | 432 W UHM lamps (x 4) (four lamp system) |
Power Supply | 200 - 240 V AC, 12 A , 50/60 Hz ( 3-wire single-phase) |
Power Consumption | 2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU ( without light o utput: 6,758 BTU ) |
DLP™ Chip | Panel Size | 21.6 mm (0.85 inches) diagonal (16:9 aspect ratio) |
DLP™ Chip | Display Method | DLP™ chip x 3 ( R, G, B), DLP™ projection system |
DLP™ Chip | Pixels | 1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels |
Product series
PT-DZ21K2 series
PT-DZ21K2 series | |||
---|---|---|---|
Model | |||
Lens test | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses | |
Projector Type | 432 W UHM lamps (x 4) (four lamp system) | 432 W UHM lamps (x 4) (four lamp system) | |
DLP™ Chip | Panel Size | 24.1 mm (0.95 inches) diagonal (16:9 aspect ratio) | 21.6 mm (0.85 inches) diagonal (16:9 aspect ratio) | |
DLP™ Chip | Display Method | DLP™ chip x 3 (R, G, B), DLP™ projection system | DLP™ chip x 3 ( R, G, B), DLP™ projection system | |
DLP™ chip | Number of Pixels | 2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels | 1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels | |
Brightness | 16,000 lumens (four lamp) | 17,000 lumens (four lamp) | 20000 lumens (four lamp) |
Resolution | 1,920 x 1,080 pixels (Input signals that exceed this resolution will be
converted to 1,920 x 1,080 pixels.) | 1,366 x 768 pixels (Input signals that exceed this resolution converted to 1,366 x 768 pixels.) | 1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.) |
Contrast Ratio | 10,000:1 (full on/full off, in dynamic iris 3 mode) | 10,000:1 (full on/full off, in dynamic iris 3 mode) | |
Screen Size | 1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with
the ET-D75LE8 tele), (1.78-7.62 m(70 - 300 inches) with the ET-D75LE5,
16:9 aspect ratio | 1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:9 aspect ratio | |
Optical Axis Shift | Vertical | ±60% (±50% with the ET-D75LE6, +75-+88% with the ET-D75LE90)
from center of screen, powered | ±70% (±60% with the ET-D75LE6, +78-+96% with the ET-D75LE90)
from center of screen, powered | |
Optical Axis Shift | Horizontal | ±20% (±15% with the ET-D75LE6, -12-+14% with the ET-D75LE90)
from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. | ±30% (±20% with the ET-D75LE6, -13-+27% with the ET-D75LE90)
from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. | |
Lens | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses | |
Installation | Ceiling/・or, front/rear | Ceiling/floor, front/rear | |
Terminals | SDI In | BNC x 1,
3G-SDI signal: SMPTE ST 424 compliant
Dual-link HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant | ||
Terminals | HDMI In | HDMI 19-pin x 1, Deep Color, compatible with HDCP | HDMI 19-pin x 1, Deep Color, compatible with HDCP | |
Terminals | DVI-D In | DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible,
for single l ink only | DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only | |
Terminals | RGB 1 In | BNC x 5 | BNC x 5 | |
Terminals | RGB 1 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. | |
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | |
Terminals | RGB 2 In | D-sub HD 15-pin (female) x 1 | D-sub HD 15-pin (female) x 1 | |
Terminals | RGB 2 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. | |
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | |
Terminals | Serial In | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
Terminals | Serial Out | D-sub 9-pin (male) x 1 for link control | D-sub 9-pin (male) x 1 for link control | |
Terminals | Remote 1 In | M3 jack x 1 for wired remote control | M3 jack x 1 for wired remote control | |
Terminals | Remote 1 Out | M3 jack x 1 for link control | M3 jack x 1 for link control | |
Terminals | Remote 2 In | D-sub 9-pin (female) x 1 for external c ontrol (parallel) | D-sub 9-pin (female) x 1 for external control (parallel) | |
Terminals | DIGITAL LINK | RJ-45 Network connection / digital link connection (video/network/serial
control) compliant with PJLink,100base-tx, Art-Net compatible
Deep Color, compatible with HDCP | RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible
Deep Color, compatible with HDCP | |
Power Supply | 200 - 240 V AC, 12 A, 50/60 Hz (3-wire single-phase) | 200 - 240 V AC, 12 A , 50/60 Hz ( 3-wire single-phase) | |
Power Consumption | 2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with
STANDBY MODE set to NORMAL.),
max. 7,031 BTU (without light output: 6,758 BTU ) | 2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.),
max. 7,031 BTU ( without light o utput: 6,758 BTU ) | |
Cabinet Materials | Molded plastic | Molded plastic | |
Operation Noise | 46 dB (quad lamp operation) | 46 dB (quad lamp operation) | |
Operating Temperature | 0°- 45°C (32°- 113°F) | 0°- 45°C (32°- 113°F) | |
Dimensions | 620 x 291 x 800 mm
(24-7/16 x 11-15/32 x 31-1/2 inches) (without lens) | 620 x 291 x 800 mm
(24-7/16 x 11-15/32 x 31-1/2 inches) (without lens) | |
Weight | Approx. 41 kg (90.4 lbs) (without lens) | Approx. 41 kg (90.4 lbs) (without lens) |
Accessories & Software
Digital Interface Box
ET-YFB100G
By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.
Showing 1 of 1
Digital Interface Box
ET-YFB100G
By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.
Showing 1 of 1
Lenses for 3-Chip DLP < 35.000 lumens
ET-D3LEF70
Fisheye lens for 3-Chip DLP projectors perfect for dome and planetarium projection
Showing 1 of 1
Brackets
ET-PKD520S
The Low ceiling mount bracket is designed for compatibility with PT-DZ21K2E, PT-DS20K2E, PT-DW17K2E, PT-DZ16K2, PT-RZ12K, PT-RQ13K projectors.
Showing 1 of 1
Related resources
Showing 12 of 36
Sorry there was an error...
The files you selected could not be downloaded as they do not exist.
You selected items.
Continue to select additional items or download selected items together as a zip file.
You selected 1 item.
Continue to select additional items or download the selected item directly.
Share page
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: