Kleinste en lichtste 4K+ Solid Shine laserprojector
PT-RQ13
DiscontinuedOntworpen voor langdurige stabiele helderheid voor evenementen en voorstellingen. 3-chip DLP-projector met laserlichtbron en 4K+-resolutie.
Belangrijkste kenmerken
| 3-chip DLP-laserprojector, 10.000 lumen, 4K+ |
| 5K-pixelkwaliteit met een Quad Pixel Drive-systeem op een WQXGA-chipset |
| Hoge beeldsnelheid van 240Hz voor uitstekende en scherpe bewegende beelden |
| Laserprojectie zonder lampen en stofbestendig vloeistofkoelsysteem voor 20.000 uur onderhoudsvrije werking |
| Contrastverhouding van 20.000:1 |
- De Quad Pixel Drive produceert 's werelds meest vooruitstrevende 4K beeldresolutie
- Real-motionprocessor combineert het maken en het verwerken van frames bij 240 Hz voor vloeiende bewegingsreductie
- Indrukwekkende helderheid van 10.000 lm
- Dynamisch contrast zorgt voor contrastverhouding van 20.000:1*1 door laserlicht te regelen
- Nieuwste generatie Detail Clarity Processor levert natuurlijke texturen tot de fijnste details
- System Daylight View 3 voor verbeterde kleurwaarneming in fel verlichte ruimtes en kaarttoepassingen.
- DICOM-simulatiemodus voor medische presentaties en trainingen*2
- Rec. 709-modus reproduceert kleuren nauwkeurig voor HDTV-projectie
Lagere exploitatiekosten, hogere betrouwbaarheid
- Lichtbron met extreem lange levensduur van 20.000 uur*3
- Nieuw vloeistofkoelsysteem zorgt voor stille werking
- Stabiele werking bij omgevingstemperaturen tot 45 °C*4
- Consistente kleurweergave zonder verslechtering van de beeldkwaliteit op de lange termijn
- Dankzij laserlichtbron is 24/7-gebruik mogelijk
- Stofdicht optisch blok
- Breed lensverschuivingsbereik
360-graden installatieflexibiliteit
- 360-graden verticale, horizontale en tilt-projectie mogelijk dankzij laserlichtbron
- Multi-Screen Support-systeem voor naadloos aansluitende projectiebeelden met randovervloeiing, kleuraanpassing en digitale beeldvergroting.
- Geometrische aanpassing voor projectie op kromme of gebogen oppervlakken
- Compatibel met kit voor automatische schermaanpassing ET-CUK10*5
- Helderheidsregeling voor meerdere schermen
- Compatibel met meervoudige bewakings- en besturingssoftware van Panasonic en Early Warning-software.
- Via DIGITAL LINK-aansluiting met één kabel kunnen video- en besturingssignalen over afstanden tot 100 m worden overgedragen
- Compatibel met verlichtingsregelingsprotocol Art-Net DMX
- Ruime aansluitmogelijkheden waaronder 3G-SDI, DIGITAL LINK, DVI-D en HDMI (vereist optionele terminal boards voor DVI-D en HDMI).
- Deelt gemeenschappelijke lenzen (inclusief de ET-D75LE90 ultra-short-throw-lens) met 3-chip DLP™-projectorserie van Panasonic.
*1 Volledig aan/uit, met dynamisch contrast ingesteld op “3”, *2 Dit product is geen medisch instrument. Niet gebruiken voor werkelijke medische diagnose, *3 Gebruiksomgeving is mogelijk van invloed op levensduur van de lichtbron, *4 Lichtopbrengst kan lager zijn om de projector te beschermen afhankelijk van omgevingsomstandigheden, *5 ET-CUK10 is beschikbaar voor gebruik over de hele wereld, behalve in de Verenigde Staten. Verkrijgbaarheid varieert per land
Product galerij
Tabel specificaties
| Brightness | 10,000 lumens |
|---|---|
| Lamp | 3-Chip DLP Laser |
| Resolution | 5,120 x 3,200 pixels (Quad Pixel Drive: ON) |
| Power Supply | AC 100-240 V, 50/60 Hz (Note: Brightness may decrease depending on power conditions) |
| Power Consumption | 1,270 W (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 913W ECO: 782W LONG LIFE1: 531-732W LONG LIFE 2: 477-702W LONG LIFE 3: 423-665W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3 |
| DLP™ Chip | Panel Size | 22.9 mm (0.9 inches) diagonal (16:10 aspect ratio) |
| DLP™ Chip | Display Method | DLP™ chip x 3 (R, G, B), DLP™ projection system |
| DLP™ Chip | Pixels | 4,096,000 (2,560 x 1,600) x 3, total of 12,288,000 pixels 49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON |
Productserie
PT-RQ13 Series
PT-RQ13 Series | |||
|---|---|---|---|
| Model |  | | |
| Lens test | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses |
| Projector Type | 3-Chip DLP Laser | 3-Chip DLP Laser | 3-Chip DLP Laser |
| DLP™ Chip | Panel Size | 22.9 mm (0.9 inches) diagonal (16:10 aspect ratio) | 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio) | 24.1 mm (0.95 inches) diagonal (4:3 aspect ratio) |
| DLP™ Chip | Display Method | DLP™ chip x 3 (R, G, B), DLP™ projection system | DLP™ chip x 3 (R, G, B), DLP™ projection system | DLP™ chip x 3 (R, G, B), DLP™ projection system |
| DLP™ chip | Number of Pixels | 4,096,000 (2,560 x 1,600) x 3, total of 12,288,000 pixels
49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON | 2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels | 1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels |
| Brightness | 10,000 lumens | 12,000 lumens | 12,000 lumens |
| Light Source | Laser Diode (Laser class: Class 1)*Class 3R for North America.
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³
43,800 hours at constant luminance (Longlife1)
61,320 hours at constant luminance (Longlife2)
87,600 hours at constant luminance (Longlife3) | Laser Diode (Laser class: Class 1)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³
43,800 hours at constant luminance (Longlife1)
61,320 hours at constant luminance (Longlife2)
87,600 hours at constant luminance (Longlife3) | Laser Diode (Laser class: Class 1)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³
43,800 hours at constant luminance (Longlife1)
61,320 hours at constant luminance (Longlife2)
87,600 hours at constant luminance (Longlife3) |
| Resolution | 5,120 x 3,200 pixels (Quad Pixel Drive: ON) | 1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.) | 1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.) |
| Contrast Ratio | 20,000:1 (full on/full off, in Dynamic Contrast 3 mode) | 20,000:1 (full on/full off, in Dynamic Contrast 3 mode) | 20,000:1 (full on/full off, in Dynamic Contrast 3 mode) |
| Screen Size | 1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio)
1.78-15.24 m (70 - 600 inches) with the ET-D75LE8 (16:10 aspect ratio)
3.05-15.24 m (120 - 600 inches) with the ET-D75LE90 (16:10 aspect ratio) | 1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio)
1.78-15.24 m (70-600 inches) with the ET-D75LE8 (16:10 aspect ratio)
3.05-15.24 m (120-600 inches) with the ET-D75LE90 (16:10 aspect ratio) | 1.78-25.4 m (70-1,000 inches) (4:3 aspect ratio)
1.78-15.24 m (70-600 inches) with the ET-D75LE8 (4:3 aspect ratio)
3.05-15.24 m (120-600 inches) with the ET-D75LE90 (4:3 aspect ratio) |
| Optical Axis Shift | Vertical | ±59% (±44% with the ET-D75LE6), (+74-84% with the ET-D75LE90),
from center of screen, powered | ±55% (±44% with the ET-D75LE6), (+73-78% with the ET-D75LE90),
from center of screen, powered | ±50% (±40% with the ET-D75LE6), (+71% with the ET-D75LE90),
from center of screen, powered |
| Optical Axis Shift | Horizontal | ±29% (±19% with the ET-D75LE6), (-12-16% with the ET-D75LE90),
from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. | ±20% (±15% with the ET-D75LE6), (±6% with the ET-D75LE90),
from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. | ±30% (±20% with the ET-D75LE6) from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50/ET-D75LE90. |
| Lens | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses | Optional powered zoom/focus lenses |
| Installation | Ceiling/floor, front/rear | Ceiling/floor, front/rear | Ceiling/floor, front/rear |
| Terminals | SDI In 1 | BNC x 1,
3G/HD/SD-SDI input, Dual-link input (LINK-A) ,
Quad-link input
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424 compliant
Dual-link HD-SDI signal SMPTE ST 372 compliant
Dual-link 3G-SDI signal SMPTE ST 425 compliant
Quad-link HD-SDI signal
Quad-link 3G-SDI signal SMPTE ST 425 compliant | BNC x 2,
Dual-link 3G-SDI signal: SMPTE ST 425 compliant
3G-SDI
(3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI)
signal: SMPTE ST 424 compliant
Dual-link HD-SDI signal: SMPTE ST 372 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant | BNC x 2,
(3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI)
3G-SDI signal: SMPTE ST 424 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant |
| Terminals | HDMI In | HDMI 19-pin x 1, Deep Color, compatible with HDCP,
NOTE: Compatible with non-interlaced signals only. | HDMI 19-pin x 1, Deep Color, compatible with HDCP,
NOTE: Compatible with non-interlaced signals only. | |
| Terminals | DVI-D In | DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only | DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible,
for single link only | |
| Terminals | RGB 1 In | BNC x 5 | BNC x 5 | |
| Terminals | RGB 1 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. | |
| Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms | Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms | |
| Terminals | RGB 1 In | Video in | BNC x 1, 1.0 Vp-p 75 ohms
Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms | BNC x 1, 1.0 Vp-p 75 ohms
Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms | |
| Terminals | RGB 2 In | D-sub HD 15-pin (female) x 1 | D-sub HD 15-pin (female) x 1 | |
| Terminals | RGB 2 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic | |
| Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms | |
| Terminals | 3D Sync 1 In/Out | BNC x 1, 1.0 Vp-p, 75 ohms
Input: TTL, high impedance. Output: TTL, max. 10 mA | BNC x 1, 1.0 Vp-p, 75 ohms
Input: TTL, high impedance. Output: TTL, max. 10 mA | |
| Terminals | 3D Sync 2 Out | BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA | BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA | |
| Terminals | Serial In | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals | Serial Out | D-sub 9-pin (male) x 1 for link control | D-sub 9-pin (male) x 1 for link control | D-sub 9-pin (male) x 1 for link control |
| Terminals | Remote 1 In | M3 jack x 1 for wired remote control | M3 jack x 1 for wired remote control | |
| Terminals | Remote 1 Out | M3 jack x 1 for link control | M3 jack x 1 for link control | |
| Terminals | Remote 2 In | D-sub 9-pin (female) x 1 for external control (parallel) | D-sub 9-pin x 1 for external control (parallel) | D-sub 9-pin x 1 for external control (parallel) |
| Terminals | DIGITAL LINK | RJ-45 x 1 (for network, DIGITAL LINK connection (HDBaseT™ compatible),
100Base-TX,compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP2.2) | RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible | RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible |
| Terminals | Expansion Slot | x 2 (SLOT 1，SLOT 2), SLOT NX (Compatible with Optional Board) | ||
| Power Supply | AC 100-240 V, 50/60 Hz
(Note: Brightness may decrease depending on power conditions) | AC 100-240 V 50/60 Hz | AC 100-240 V 50/60 Hz |
| Power Consumption | 1,270 W (0.3 W with STANDBY MODE set to ECO. 4 W with
STANDBY MODE set to NORMAL.),
Average power consumption
NORMAL: 913W ECO: 782W LONG LIFE1: 531-732W
LONG LIFE 2: 477-702W LONG LIFE 3: 423-665W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in),
ICE627087: 2008 Broadcast contents,
Picture mode: Dynamic, Dynamic Contrast3 | 1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.),
Average power consumption
NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W
LONG LIFE 3: 550W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in),
ICE627087: 2008 Broadcast contents,
Picture mode: Dynamic, Dynamic Contrast3 | 1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.),
Average power consumption
NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W
LONG LIFE 3: 550W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in),
ICE627087: 2008 Broadcast contents,
Picture mode: Dynamic, Dynamic Contrast3 |
| Cabinet Materials | Molded plastic | Molded plastic | Molded plastic |
| Operation Noise | 46 dB | 43 dB | 43 dB |
| Operating Temperature | Ambient operating temperature: 0°C to 45°C (32 °F to 113 °F).
Ambient operating humidity: 10% - 80% (no condensation)
When the operating mode is set to "Normal", the operating temperature range is 0°C to 45°C (32 °F to 113 °F), and at altitudes from 1,400 m to 4,200 m
(4,593 ft to 13,780 ft) it is 0°C to 40°C (32 °F to 104 °F).
When the operating mode is set to "Eco", or "Long Life 1/2/3", the operating
temperature range is 0°C to 40°C (32 °F to 104 °F).
When the projector is used with a Smoke Cut Filter, the operating temperature range is 0°C to 35°C (32 °F to 95 °F).
Furthermore, when the operating mode is set to "Eco", or "Long Life 1/2/3",the projector cannot be used at altitudes above 2700 m (8,858 ft). In addition,
when the projector is used with a Smoke Cut Filter, it cannot be used at altitudes above 1,400 m (4,593 ft). The brightness of the light source may drop depending on the operating environment and the operating temperature range in order to protect the projector. | Normal
The operating temperature range is 0°C to 50°C (32 °F to 122 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.)
Eco/Long life 1/2/3
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.)
When the projector is used with a Smoke Cut Filter
The operating temperature range is 0°C to 40°C (32 °F to 104 °F).
(The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.)
* The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be. | Normal
The operating temperature range is 0°C to 50°C (32 °F to 122 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.)
Eco/Long life 1/2/3
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.)
When the projector is used with a Smoke Cut Filter
The operating temperature range is 0°C to 40°C (32 °F to 104 °F).
(The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.)
* The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be. |
| Dimensions | 578 x 323.5 x 740 mm
(22-3/4 x 12-23/32 x 29-1/8 inches) (with projections)
578 x 270 x 725 mm
(22-3/4 x 10-5/8 x 28-17/32 inches) (without lens, feet or projections) | 578 x 323.5 x 740 mm
(22-3/4 x 12-23/32 x 29-1/8 inches) (without lens) | 578 x 323.5 x 740 mm
(22-3/4 x 12-23/32 x 29-1/8 inches) (without lens) |
| Weight | 49 kg (108.0 lbs) (without lens) | 44 kg (97.0 lbs) (without lens) | 44 kg (97.0 lbs) (without lens) |
| Applicable Software/Application | Logo Transfer Software, Multi Monitoring & Control Software,
Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit) | Logo Transfer Software, Multi Monitoring & Control Software,Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit) | Logo Transfer Software, Multi Monitoring & Control Software,
Early Warning Software,Geometry Manager Pro (ET-UK20 series Upgrade Kit and ET-CUK10 series Auto Screen Adjustment Kit) |
Accessoires & Software
Digital Interface Box
ET-YFB100G
Door de ET-YFB100G met een DIGITAL LINK-gereed apparaat te combineren, kunnen video-, audio- en besturingssignalen via één enkele kabel worden verzonden.
Showing 1 of 1
Digital Interface Box
ET-YFB100G
Door de ET-YFB100G met een DIGITAL LINK-gereed apparaat te combineren, kunnen video-, audio- en besturingssignalen via één enkele kabel worden verzonden.
Showing 1 of 1
DIGITAL LINK Switcher
ET-YFB200G
2 x DIGITAL LINK (o.b.v. HDBaseT™ -technologie) voeren ongecomprimeerde HD digitale video-, audio- en opdrachtsignalen uit naar twee projectors/schermen.
Showing 1 of 1
DIGITAL LINK Switcher
ET-YFB200G
2 x DIGITAL LINK (o.b.v. HDBaseT™ -technologie) voeren ongecomprimeerde HD digitale video-, audio- en opdrachtsignalen uit naar twee projectors/schermen.
Showing 1 of 1
BESCHIKBAAR VANAF CY2024 Q3
Lenses for 3-Chip DLP < 35.000 lumens
ET-D3LEU101
Deliver Spectacular Images at Short Distance with New Zero-Offset Lenses
Lenses for 3-Chip DLP < 35.000 lumens
ET-D75MC1
Lensmotorkap voor 3-DLP-projectors
Lenses for 3-Chip DLP < 35.000 lumens
ET-D3LEF70
Fisheye-lens voor koepelprojectie
Lenses for 3-Chip DLP < 35.000 lumens
ET-D3LEW50
0.7:1 projectieverhouding (WUXGA)
Showing 4 of 4
Filters
ET-EMF330
Filtr ekologiczny
Filters
ET-SFR330
Rookfilter
Showing 2 of 2
Interface board/conversion cable
ET-MDNDV10
DVI-D-ingangssignaalkaart
Interface board/conversion cable
TY-TBN03G
3G-SDI-ingangssignaalkaart
Interface board/conversion cable
ET-MDN12G10
12G-SDI signal board
Showing 3 of 3
Software
Multi Monitoring and Control Software
Afstandsbediening, monitoring en live-status van uw projectors en schermen vanaf intranet.
Showing 1 of 1
Brackets
ET-PKD520S
Montagebeugel voor lage plafonds
Showing 1 of 1
Frames
ET-RFD60
The rental frames are sturdy, strong and visually appealing. In addition, they offer a horizontal and vertical adjustment feature for the ideal projector position.
Showing 1 of 1
Media Processor
ET-FMP20
Mediaprocessors herdefiniëren workflows voor meerdere projecties voor lmmersieve ervaringen
Media Processor
ET-FMP50
Mediaprocessors herdefiniëren workflows voor meerdere projecties voor lmmersieve ervaringen
Showing 2 of 2
Media Processor
ET-FMP20
Mediaprocessors herdefiniëren workflows voor meerdere projecties voor lmmersieve ervaringen
Media Processor
ET-FMP50
Mediaprocessors herdefiniëren workflows voor meerdere projecties voor lmmersieve ervaringen
Showing 2 of 2
Gerelateerde bronnen
Showing 12 of 37
Showing 12 of 16
Sorry there was an error...
The files you selected could not be downloaded as they do not exist.
You selected items.
Continue to select additional items or download selected items together as a zip file.
You selected 1 item.
Continue to select additional items or download the selected item directly.
Pagina delen
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: