ET-YFB100G Digital Interface Box
Digital Interface Box
|Simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.|
|Transmission up to 100m|
|Abundant input terminals, including two sets of HDMI and RGB inputs.|
|A separate audio output enables sound to be output when the display power is turned off.|
|ET-YFB100G input can be selected with the remote control of a Panasonic display with DIGITAL LINK compatibility.|
By combining the ET-YFB100G with a DIGITAL LINK-ready projector, video, audio and control signals can be transmitted over a single cable. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Transmits Digital Signals with a Single Cable
Equipped with a DIGITAL LINK output terminal. Allows transmission of HDMI, uncompressed HD digital video,
audio and control signals (Ethernet, RS-232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher.
Abundant input terminals, including two sets of HDMI and RGB inputs.
A separate audio output enables sound to be output when the projector power is turned off.
ET-YFB100G input can be selected with the remote control of a Panasonic projector with DIGITAL LINK compatibility.
Outputting High-Quality Images in Their Optimal Form
Digital transmission allows clear image and sound quality without any degradation even over long distances.
Digital Cinema Reality converts interlaced motion image signals into beautifully smooth progressive images.
PC signals are automatically resized and output in the optimal resolution to match the projector panel resolution.*
The Auto Setup function automatically distinguishes the input signal and adjusts it to output the optimal angle of view.
3D video format transmission is supported (Pass Through mode only)
* The output setting for the ET-YFB100G should be set to AUTO. This scaling/resizing function does not support some formats.
Ecodesign Information under EU Regulation 801/2013, please visit here: www.ptc.panasonic.eu
|Power Supply||DC 16 V (DC input terminal)|
|Power Consumption||16 W [0.2 W with the power off](including power consumption of the AC adaptor)|
|AC Adaptor | Input||100-240 V AC, 50/60 Hz|
|AC Adaptor | Output||DC 16 V, 3.75 A|
|Scanning Frequency (RGB)||fH: 15.6-99 kHz, fV: 24-119.8 Hz, dot clock: 13.5-162 MHz|
|Scanning Frequency YPBPR (YCBCR)||fH: 15.75 kHz, fV: 60 Hz [480i (525i)]fH: 15.63 kHz, fV: 50 Hz [576i (625i)]fH: 31.50 kHz, fV: 60 Hz [480p (525p)]fH: 31.25 kHz, fV: 50 Hz [576p (625p)]fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i]fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]|
|Scanning Frequency (Video/S-Video)||fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]|
|Terminals HDMI In||HDMI 19-pin x 2 (Deep Color, compatible with HDCP)480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/25p, 1080/30p, 1080/60p,1080/50p, VGA (640 x 480)-WUXGA*1 (1,920 x 1,200),audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)|
ET-YFB100 Image hi-res
Components with Mounting Brackets for Countertop hi-res : ET-YFB100G
Showing 4 of 11
ET-YFB100G Operating Instruction (English)
Operating Instructions : ET-YFB100G (English)
Share this link via:
Or copy link: