Highly reliable 1.8 mm bezel video wall display

TH-55VF1H

Discontinued

55" frameless D-LED LCD, robust, 700 cd/m², 1.8mm bezel to bezel, 24/7 operation, portrait

Key features

55", 700 cd/m2, 1.8 mm bezel to bezel
A ultra narrow frame for optimal multi-screen layouts.
Ideal for installation in bright places thanks to its 700 cd/m2, wide colour viewing angle with glossy finish surface
Durable failover and failback function with simplified workflow solution

Narrow Bezel for Seamless Video Walls

Narrow frames on Panasonic's LCD Video Wall Series reduce bezel-to-bezel distance to a near-invisible 1.8 mm*. Even when viewed close-up, screen borders are almost indiscernible, resulting in truly spectacular large-format images.

* Bezel-to-bezel distance refers to the combined top and bottom (or left and right) bezel-width of adjacent displays in video-wall configuration. The gap between displays is not included.

IPS Panel Improves Off-Axis Visibility

High-resolution IPS (In-Plane Switching) panel technology ensures that pictures displayed on screen remain clearly visible even when observed from oblique angles: vital for signage applications as well as in control rooms where clear visibility is necessary at all times.

Anti-Glare (AG) Surface Treatment

The AG layer on LCD Video Wall Series displays scatters reflected natural or artificial light, improving visibility. In particular, the AG treatment enhances screen clarity in surveillance stations and public facilities.

Minimize Downtime and Improve Efficiency

Optional ET-SWA100 Series* Early Warning Software monitors all display devices over the network. Administrators can monitor device status in real time, view operation history, and receive alerts if abnormalities are detected. Monitoring servers with this software installed can be checked via tablet or notebook PC browser. As well as minimizing downtime, the software reduces unnecessary visits to remote display sites and saves service time and cost.

* Part number suffix may differ depending on the license type. Note that some potential device failures cannot be predicted. For more information about Early Warning Software and our free 90-day software trial* promotion, please visit: http://panasonic.net/prodisplays/products/et-swa100/ * Available with software version 2.1 or later.

DIGITAL LINK Simplifies Installation at Lower Cost

Based on HDBaseT™ technology, the DIGITAL LINK connection on VH1H display supports audio, video, and control signal transmission over long distances, and can also be used to daisy-chain multiple displays via a single cable. This eliminates the need for video splitters and other routing devices.

Note: CAT5e or higher STP cable required.

Precision Video-Wall Mounting System

Optional Installation Mount makes setting up a spectacular video wall comparatively quick and painless. As well as saving time and reducing labor cost, the rigid mount also eliminates potential panel-surface alignment inconsistencies with the use of an automatic magnet system.
The Panasonic LCD Video Wall Series also features optional cover frames for extra protection against impact.

Video Wall Manager Software and Auto Display Adjustment Upgrade Kit

Panasonic's free Video Wall Manager software can be used with LCD Video Wall Series displays. With this software, you can calibrate display color using a color sensor, adjust display settings, and control and manage data via PC. If software is upgraded with an optional TY-VUK10 Auto Display Adjustment Upgrade Kit, brightness and color among multiple displays can be automatically calibrated using a compatible camera (Nikon D5200/D5300/D5500)*.

* Available only with normal zoom lens: AF-S DX NIKKOR 18–55 mm f/3.5–5.6G, AF-S DX NIKKOR 18–140 mm f/3.5–5.6G ED VR, AF-S DX NIKKOR 18–55 mm f/3.5–5.6G VR II

Specifications table

Screen Size55-inch(1387 mm)
Panel TypeIPS/D-LED
Aspect Ratio16:9
Effective Display Area (W x H)1209 x 680 mm(47.6" x 26.8")
Number of Pixels (H x V)1920 x 1080 pixels
Brightness700 cd/m2
Contrast Ratio1200:1
Response Time8.0 ms(G to G)

Product series

VF Series

VF Series
 
Model
Screen Size
55-inch(1387 mm)
54.6-inch (1387 mm )
54.6-inch(1387.8 mm)
Panel Type
IPS/D-LED
IPS/D-LED
IPS/D-LED
Aspect Ratio
16:9
16:9
16:9
Effective Display Area (W x H)
1209 x 680 mm(47.6" x 26.8")
1209.6 x 680.3 mm(47.62" x 26.78")
1209.6 x 680.3 mm(47.62" x 26.78")
Number of Pixels (H x V)
1920 x 1080 pixels
1920 x 1080
1920 x 1080 pixels
Brightness
700 cd/m2
700 cd/m2
500 cd/m2
Contrast Ratio
1200:1
1100:1
1100:1
Response Time
8.0 ms(G to G)
8.0 ms (G to G)
8.0 ms(G to G)
Viewing Angle
178°/178°
178°/ 178° (CR ≧ 10)
178°/ 178° (CR ≧ 10)
Panel Surface Treatment
Anti-glare treatment (Haze 44%)
Advanced Anti-glare treatment (Haze 28%)
Advanced Anti-glare type (Haze 28%)
Terminals | HDMI In
Type A Connector x 1
Type A Connector x 1
Terminals | DisplayPort IN
DisplayPort( DP1.1 Dual Mode Only) x 1
DisplayPort( DP1.1 Dual Mode Only) x 1
Terminals | DVI-D IN/AUDIO IN (L/R)
DVI-D 24-pin x2
DVI-D 24-pin x2
Terminals | PC IN/AUDIO IN (L/R)
Mini D-Sub 15-pin x 1 (Female)
Mini D-sub 15-pin x 1 (Female)
Terminals | Serial In/Out
D-sub 9pin x 1 / x 1, RS-232C Compatible
D-sub 9pin x 1 / x 1, RS-232C Compatible
Terminals | IR In/Out
Stereo Mini Jack (M3) x 1 / x 1
Stereo Mini Jack (M3) x 1/ x 1
Terminals | Audio Out
Stereo Mini Jack (M3) x 1 Variable (- ∞ - 0 dB) (1 kHz 0 dB Input,10 k Ω Load)
Stereo Mini Jack (M3) x 1 Variable (- ∞ - 0 dB) (1 kHz 0 dB Input,10 k Ω Load)
Terminals | LAN
RJ45 x 1 / x 1, 100BASE-TX, Compatible with PJLinkTM (Shared with DIGITAL LINK)
RJ45 x 1/ x 1, 100 BASE-TX, Compatible with PJLink™ (Shared with DIGITAL LINK)
Terminals | USB
USB 2.0 Type A connector x 1 DC 5 V / 500 mA (USB3.0 is not supported.)
USB 2.0 Type A connector x 1 DC 5 V / 500 mA (USB3.0 is not supported.)
Speaker
8Ω ,20 W [10 W + 10 W](10 % THD)
8Ω ,20 W [10 W + 10 W](10 % THD)
Power Requirements
AC 110 - 127 V 50Hz/60Hz AC 220 - 240 V, 50 Hz/60 Hz
AC 110 - 127 V 50Hz/60Hz AC 220 - 240 V, 50 Hz/60 Hz
Power Consumption
300 W
300 W
On Mode Average Power Consumption
165 W
165 W *Based on IEC 62087 Ed.2 measurement method
Power Off Condition
approx. 0 W
approx. 0 W
Standby Condition
approx. 0.5 W
approx. 0.5 W
Dimensions (W x H x D)
1212 x 683 x 95 mm(47.7" x 26.9" x 3.75")
1210.6 x 681.3 x 97.3 mm / 47.658" x 26.820" x 3.829"
1210.6 x 681.3 x 97.3 mm / 47.658" x 26.820" x 3.829"
Weight
Approx. 30.0 kg (66.1 lbs.)
approx. 23.0 kg / approx. 50.7 lbs
approx. 23.0 kg / approx. 50.7 lbs
Carton Dimensions (W x H x D)
1395 x 848 x 280 mm / 55.0" x 33.4" 11.1"
1395 x 848 x 280 mm / 55.0" x 33.4" 11.1"
Gross Weight
34 kg / 75.0 lbs
34 kg / 75.0 lbs
Bezel Width
0.9 mm(0.036")
T / B / R / L 0.44 mm / 0.018"
T / B / R / L 0.44 mm / 0.018"
Wall-Hanging Pitch
VESA compliant 400 x 400 mm(15.8" x 15.8")
VESA Compliant 400 x 400 mm / 15.8" x 15.8" (Installed by: M6 screws / Screw hole depth 12 mm / 0.47")
VESA Compliant 400 x 400 mm / 15.8" x 15.8" (Installed by: M6 screws / Screw hole depth 12 mm / 0.47")
Operating Time
24 h/day
24 h/day
Operating Environment
0℃ to 40℃ / 32°F to 104°F  /for up to 1400 m (4593 ft) altitude 0℃ to 35℃ / 32°F to 95°F   /for between 1400 m (4593 ft) and 2800 (9186 ft) m altitude Depending on the temperature or humidity conditions, uneven brightness may be observed. This is not a malfunction.
Temperature: 0 °C to 40 °C (32 °F to 104 °F)/Humidity: 20-80 % (Non condensation) /for up to 0-1400 m (4593 ft) attitude. Temperature: 0 °C to 35 °C (32 °F to 95 °F)/Altitude 1400 -2800 m (4593 ft to 7874 ft)

Accessories & Software

Video Wall Accessories

TY-VK55LV2

Magnetic mounting system for 55" video wall landscape installations. Saves time, reduces labor cost, eliminates panel-surface alignment inconsistencies.

Video Wall Accessories

TY-CF55VW1

Cover Frame kit for video wall displays

Showing 2 of 2

Auto Display Adjustment Upgrade Kit

TY-VUK10

Software automatically adjusting the colours and brightness levels of multiple displays in a video wall installation

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

Showing 1 of 1

Related resources

Showing 12 of 53

Showing 12 of 19

Sorry there was an error...
The files you selected could not be downloaded as they do not exist.

You selected items.
Continue to select additional items or download selected items together as a zip file.

You selected 1 item.
Continue to select additional items or download the selected item directly.

Download selected file