Breadcrumb
6,200 lumens Solid Shine laser projector
PT-RZ660
DiscontinuedLaser 1-Chip DLP, 6200 lumens (centre), WUXGA, 360 degrees free installation, long lastin laser engine
Key features
Laser 1-Chip DLP, 6200 lumens (centre), WUXGA |
High brightness and excellent image quality with laser light source |
Maintenance free up to 20,000 hours with dust-resistant optical block and long lasting laser engine |
Free 360 degrees installation and Geometric Manager Pro function |
10,000:1 contrast ratio |
PT-RZ660 | PT-RW620 | |
---|---|---|
Brightness | 6,200 lm (centre)/ 6,000 lm (ANSI) | 6,200 lm (centre)/ 6,000 lm (ANSI) |
Resolution | WUXGA/ (1,920x 1,200) | WXGA/ (1,280x 800) |
Contrast Ratio | 10,000:1 | 10,000:1 |
Wide spectrum colour with up to 6.200 lm (centre) brightness
With the next generation of the DLP™ technology the RZ660 series is delivering high resolution in detail and the dual laser modules outputting a brightness of up to 6.200 lm (centre). Due to the quartet colour harmonizer the energy loss of the light source is reduced and the robust and heat resistant phosphor wheel the of PT-RZ660 solid shine laser series produces scintillating images with unfailing reliability.
Outstanding white balance and colour reproduction
The quartet colour harmonizer wheel mechanism captures a wider colour space than comparable laser projectors, which allows white to be reproduced realistically on the screen. With conventional projectors it’s difficult to achieve an accurate white balance causing images to appear with a distracting greenish tint. Panasonic’s quartet colour harmonizer eliminates this negative impact by adding an additional yellow segment to the colour wheel to produce whites with unparalleled accuracy for natural and realistic picture quality.
Maintain image quaility for longer use
Thanks to the long lasting dual solid state laser modules, there are no lamps which needs to be replaced. The image colours and brightness degrades very gradually in consistent, linear fashion. As well as reducing maintenance hassle, out-of-the-box picture quality preserves longer.
Dependable 24/7 operation with failover protection
With the dual drive laser optical engine the laser diodes are grouped into two discrete modules. A failsafe redundancy circuit works to minimize the brightness- and colour uniformity loss if a laser diode fails. In combination with the 20.000 hours*1 maintenance-free projection period the PT-RZ660 series is ideal for mission critical applications.
Dynamic light control delivers better contrast
The PT-RZ660 series directly modulates laser power output to achieve a high contrast with low power consumption. A digitally controlled frame-by-frame scene-linking modulation ensures highly precise output adjustment, while the accurate 10.000:1 contrast ratio is delivered even when bright and dark scenes are frequently interchanging.
Vivid images in bright environments
Panasonics premium system daylight view 3 prevents images from washing cut in well lit envorinments and enhances brightness perception in multi-projector mapping applications by adjusting sharpness and gamma curves and correcting colours. The result is a greater visual impact even in challenging conditions.
Deatil clarity processor 3 - Sharpness in the finest details
This unique Panasonic circuit optimizes the sharpness of each image based on the super high, high, medium and low frequency components of the extracted image information. The resulting images are expressed with natural and convincing realism.
Dust-resistant airtight optical block
The optical block of the PT-RZ660 series is airtight, ensuring consistent, long-lasting image quality for up to 20.000 hours* without maintenance. The optical block design passed stringent testing to assure utmost realiability in environments with up to 0,15mg of particulate matter per cubic meter*2 . The structure prevents brightness degration from dust intrusion.
Select a mode to maintain image quality for longer
Approximatley 20.000 hours of continuous operation
In Normal Mode, the PT-RZ660 series can operate continuously for about 20.000 hours*1. In Eco Mode, this is extended to around 24.000 hours. These modes enhance suitability for education and signage appliacation.
Long Life mode offers up to 10 years maintenance free
In environments where full grightness is not necessary, such as survaillance, control- and simulation-rooms, constatn operation modes extend light-source replacement up to 87.600 hours*2 in Long Life Mode 3 - about 10 years of 24/7 operation with consistent brightness and colour.
User operation modes
In addition to present operation modes, the PT-RZ660 series can be customized to achieve your prefered balance of brightness performance or extended life.
Original Contrast Sync and Shutter Sync functions
The PT-RZ660 series is among the world's first to feature contrast and shutter sync functions for multi screen and mapping applications. Contrast Sync allows the projector's digitally modulated contrast function to be synchronized over the network for consistent picture quality across the screens, while Shutter Sync incorporates a master/slace principle to synchronize shutter on/off timing between all networked projectors. It includes simultaneous face-in and fade-out functions
Geometric Adjustment adapts special projection surfaces
Geo Adjustment adapts the image for projection into spherical, cylindrical and otehr speical shaped screens. Fine-tuning is performed with the remote control with no external equipment needed. paured with Multi-Screen support system, highly creative mapping presentations are possible in variety of event and staging applications.
Single-cable Digital Link control and video connection
Upward HDBaseT™ compatible Digital Link supports transmission of uncompressed Full HD video and control commands through a single CAT 5e or higher STP cable for distances of up to 150m. Add an optional Digital Link switcher (ET-YFB200) or Digital Interface Box (ET-YFB100) to further simplify installation in large venues while reducing cost and improving reliability at the same time.
*1 At this time the brightness will have decreased to approx. haolf of it's original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic). Panasonic recommends cleaning or check-up at point of purchase after approx. 20.000 hours. Light source lifetime may be reduced depending on environmental conditions. Replacement parts other than the light source may be required in a shorter period. *2based on American Society of Heating, Refrigiating and Air-Condition engineers [ASHRAE] and Japanese building maintenance association guidelines *3 With operation mode set to long life 3. Long life mode is tested in conditions with 0.015mg of particulate matter per cubic meter (simulating rear-box projection environment), which is not compliant with the ASHRAE. 24 hours/ day x 365 days/year x 10 years= 87.000 hours. Replacement parts other than the light source may be required in a shorter period.
Product gallery
Specifications table
Power Supply | AC100 - 240V 7.1A 50Hz/60Hz |
---|---|
Power Consumption | 700W NORMAL: 499W ECO: 428W LONG LIFE1: 287 - 402W LONG LIFE 2: 262 - 402W LONG LIFE 3: 238 - 402W SHUTTER: 69W STANDBY MODE [ECO]*1: 10.2W STANDBY MODE [NORMAL]: 3W STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft), ICE62087: 2008 Broadcast contents, Picture mode: Standard, Dynamic Contrast2 |
BTU Value | Max 2389BTU |
DLP™ Chip | Panel Size | 17.0 mm (0.67 in) diagonal (16:10 aspect ratio) |
DLP™ Chip | Display Method | DLP™ chip x 1, DLP™ system |
DLP™ Chip | Pixels | 2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels |
Lens | PT-RZ660B/W | Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm |
Lens | PT-RZ660LB/LW | Optional powered zoom/focus lenses and xed-focus lens |
Product series
PT-RZ660 Series
PT-RZ660 Series | |
---|---|
Model | |
DLP™ Chip | Panel Size | 17.0 mm (0.67 in) diagonal (16:10 aspect ratio) |
DLP™ Chip | Display Method | DLP™ chip x 1, DLP™ system |
DLP™ Chip | Number of Pixels | 2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels |
Brightness | 6,200 lumens (Center)/ 6,000 lumens |
Light Source | Laser Diode Laser class 1(Class3R for US models)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 30°C (86°F), Altitude 700m (2,297 ft), Dust: 0.15mg/m3
Dynamic Contrast3
43,800 hours at constant luminance (LONG LIFE1)
61,320 hours at constant luminance (LONG LIFE2)
87,600 hours at constant luminance (LONG LIFE3) |
BTU Value | Max 2389BTU |
Resolution | WUXGA 1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.) |
Contrast Ratio | 10,000:1 (All White/All Black) (Dynamic Contrast3) |
Screen Size | 1.27- 15.24 m (50-600 inches) (16:10 aspect ratio)
*1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio)
*2.54 - 7.62 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio) |
Optical Axis Shift | Vertical: +50%, -16%(powered),
Horizontal: +30%, -10% (When using the ET-DLE085/ET-DLE105, +28%, -10%) (powered)
NOTE: Optical a xis shift function cannot be operated when used with the ET-DLE055.
If using the ET-DLE030, the optical axis is fixed. |
Installation | Ceiling/floor, front/rear, 360 degree free installation |
Terminals | SDI In | BNC x 1,
3G-SDI signal: SMPTE ST 424 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant |
Terminals | HDMI In | HDMI 19-pin x 1, Deep Color, compatible with HDCP |
Terminals | DVI-D In | DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP,
for single link only |
Terminals | RGB 1 In | BNC x 5 |
Terminals | RGB 1 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic |
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR) | Y:1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
Terminals | RGB 1 In | Video in | 1.0Vp-p, 75 ohms |
Terminals | RGB 2 In | D-sub HD 15-pin (female) x 1 |
Terminals | RGB 2 In | R, G, B | R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic |
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms |
Terminals | Multi Sync In | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
Terminals | Multi Sync Out | D-sub 9-pin (male) x 1 for link control |
Terminals | Remote 1 In | M3 jack x 1 for wired remote control |
Terminals | Remote 1 Out | M3 jack x 1 for link control (for wired remote control) |
Terminals | Remote 2 In | D-sub 9-pin (female) x1 for external control (parallel) |
Terminals | DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
connection, 100Base-TX, compliant with PJLink™(Class 1)
Deep Color, HDCP |
Power Supply | AC100 - 240V 7.1A 50Hz/60Hz |
Power Consumption | 700W
NORMAL: 499W ECO: 428W LONG LIFE1: 287 - 402W
LONG LIFE 2: 262 - 402W LONG LIFE 3: 238 - 402W SHUTTER: 69W
STANDBY MODE [ECO]*1: 10.2W STANDBY MODE [NORMAL]: 3W
STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft),
ICE62087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic Contrast2 |
Operation Noise | 35 dB |
Operating Temperature | 0-45 °C (32-113 °F) * 6 |
Cabinet Materials | Molded plastic |
Technology | 1-Chip DLP Laser |
Accessories & Software
Lenses for 1-Chip DLP
ET-DLE085
0.8-1.0:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE150
1.3-1.9:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE250
2.3-3.6:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE350
3.6-5.4:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE450
5.4-8.6:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE105
1.0-1.3:1 throw ratio (WUXGA)
Lenses for 1-Chip DLP
ET-DLE035
0.380:1 throw ratio (WUXGA) Ultra Short Throw Lens capable of projecting on 100-350 inch diagonal screen sizes.
Showing 7 of 7
Digital Interface Box
ET-YFB100G
By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.
Showing 1 of 1
Digital Interface Box
ET-YFB100G
By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.
Showing 1 of 1
DIGITAL LINK Switcher
ET-YFB200G
2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.
Showing 1 of 1
DIGITAL LINK Switcher
ET-YFB200G
2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.
Showing 1 of 1
Geometry Manager Pro
ET-UK20
Geometric adjustment option for 3D mapping and complex projection adjustments.
Showing 1 of 1
Autoscreen Adjustment
ET-CUK10_CUK10P
Expends Geometry Manager Pro software allowing automatic adjustment of multi-screen or curved-screen projections.
Showing 1 of 1
Brackets
ET-PKD120H
High ceiling mount bracket
Brackets
ET-PKD120S
Low ceiling mount bracket
Brackets
ET-PKD130H
ET-PKD130H
Brackets
ET-PKD130B
Bracket assembly
Showing 4 of 4
Frames
ET-RFD40
The rental frames are sturdy, strong and visually appealing. In addition, they offer a horizontal and vertical adjustment feature for the ideal projector position.
Showing 1 of 1
Related resources
Showing 12 of 49
Sorry there was an error...
The files you selected could not be downloaded as they do not exist.
You selected items.
Continue to select additional items or download selected items together as a zip file.
You selected 1 item.
Continue to select additional items or download the selected item directly.
Share page
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: