Products

Filters
725 results

Ultra Short Throw Projectors

PT-CMZ50

CMZ50 is een ultra-short-throw projector voor goed verlichte HyFlex leer- en vergaderruimtes.

PT-RQ25K Series

PT-RQ25K

Lever meer voor minder met 's werelds kleinste en lichtste 20.000 lm 3-chip DLP™ 4K-projector

PT-RQ50K Series

PT-RQ50K

's Werelds meest compacte laserprojector van 50.000 lumen met native 4K-resolutie en 3-chip DLP-technologie

SQ1H Series

TH-75SQ1H

4K displays met hoge helderheid en 24-uursbediening

PT-RQ35K Series

PT-RQ35K

Ondanks de hoge helderheid en de verbluffende beeldkwaliteit is de PT-RQ35K-serie het kleinste en lichtste 3-chip DLP™-product in zijn klasse en kan het met slechts twee personen worden getransporteerd en geïnstalleerd. Bespaar op arbeid en geniet van meer gemak wanneer de opslagruimte beperkt is. Een combinatie van twee blauwe en een rode laser vergroot de kleurweergave met 114%*3 over de PT-RQ32K. Levendige rode en echte blauwe weergave verhogen het realisme voor een meeslepende ervaring en tillen de hoge resolutie-inhoud naar een hoger niveau. Het opnieuw ontworpen luchtstroompad, het koelsysteem en de vinloze radiator versterken de betrouwbaarheid. Dynamic Digital Control regelt de rode laservoer en koeling voor een consistente beeldkwaliteit. Verwacht 20.000 uur aan onderhoudsvrije projectie met back-up-ingang en laser-failovercircuit die gemoedsrust bieden wanneer de projectie niet mag worden onderbroken.

4K UHD PTZ Models

AW-UE4

Compacte 4K ePTZ-camera voor hoogwaardige video-output van maximaal 4K/30P. 

Placement (SMT)

NPM-VF

The NPM-VF is equipped with a double portal. The SMD and THT components are placed by one placement head per portal. A wide variety of vacuum pipettes and grippers are available. The pick and place machine can be used in single or dual lane mode. The NPM-VF reaches a speed of up to 4,500cph and can process component sizes from 5x5mm up to 130x35mm and 60mm height. Active cutting and clinching tools are integrated which detach THT components from the radial and axial feeders. Clinching directions as well as pin lengths per THT component can be defined via the assembly program. Beside the radial and axial feeders, the NPM-VF can be equipped with all common standard feeder systems for SMD components. The flexible NPM-VF is an ideal machine for cycle-optimized production, especially for companies that must process both types of components due to the increased demand from power electronics for THT assemblies. This efficient pick and place machine contributes to reduce manpower requirements and to consistent production with high productivity, flexibility and high-quality pick and place results.

Insertion (THT/PTH)

RG131

The RG 131 is the successor of the RHSG. By supporting 3/4 pitches, expanding the range of board sizes and increasing component insertion rate, this high-density radial component insertion machine increases productivity. High speed insertion at a rate of between 0.25s and 0.6s per component can be achieved, even for large-size components with 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) configurations. A comprehensive self-correction function ensures high reliability. With large numbers of component supply and dual-partitioned component supply units, long-term operation can be obtained. A total of up to 80 types of components can be mounted. With large numbers of component supply and dual-partitioned component supply units, long-term operation can be achieved easily with the RG131. A total of up to 80 types of components can be mounted, with up to 32 (16 + 16) types of large components. The two separate component supply units enable components to be exchanged and replenished during operation. Panasonic offers also the RG131-S platform version with smaller footprint. Higher productivity expanding board size range and increasing component input.

Insertion (THT/PTH)

RL132

The RL132 combines functionality and speed with an insertion rate up to 25,700cph (.14s/component), a board processing sizes up to 650 x 381mm, a 33% reduction in PCB transfer time, up to 18% reduction in electrical and air consumption per insertion and an improved parts lifespan for a very low cost of ownership. This through-hole machine features a 4-pitch span and is configurable with 40 or 80 components inputs. Meanwhile, its dual split carriage enables machine function at exchange mode and parts replenishment during production. The RL132 was designed for a non-stop productivity. The Lead V cut method enables the RL132 to insert radial lead components at a speed of 0.14s/component. Either a 2-pitch (2.5mm/5.0mm), 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) option can be selected. The fixed feeder unit method and an out-of-component detection function allow ongoing component replenishment and long-term runs. PCB of 650mm x 381mm can be processed.

Insertion (THT/PTH)

AV132

Supplied with a 40 or 80 component feeder with optional jumper wire, the compact supply unit configuration of the AV132 can fit both ammo pack and reel. The dual partition configuration enables a fast changeover. The next job can be set up while the current one is being processed.Capable of inserting components in four directions: 0°, 90°, 180°, and 270°, the AV132 optimizes productivity by simultaneously handling 26 and 52mm taped components and providing fast, full auto-recovery. The AV132 can reduce loading times by running two PCBs simultaneously, enabling efficient production due to a speed of 0.12s/component and a transfer speed of 2s/PCB.The fixed feeder unit and the out-of-component detection feature allow to replenish components while maintaining long-term non-stop runs.Preparation in advance or equipment operation during component change-over is possible.

System Product Collaboration

Tecnopoint

TUNING is een robotsysteem dat PTZ-camera's voorziet van gemotoriseerde dolly's en telescopische kolommen van uitzendkwaliteit.

Printing (SMT)

SPV

The SPV Stencil Printer offers a variety of options to suit different PCBs and production processes for consistent high quality. With its high 10s/PCB cycle time, the SPV eliminates bottlenecks and ensures quality by self-cleaning after every PCB. Three conveyors and the PCB identification function provide different automatic printing set ups for a high throughput. With the machine-to-machine-communication option the SPV Screen Printer is using APC correction data to correct positional printing errors. The SPV Stencil Printer can print multiple 350x300mm (M-size) boards simultaneously. This lowers WIP inventory and reduces changeover times by processing up to 4 unique products at once. The configuration minimizes capital expenditure by reducing printer investment by 50% and maximize the floor space utilization with new hybrid board handling concept and the multi-stage board handling conveyors.

You can select up to 3 products to compare: