Compact Solid Shine Laser 12 000 lumens Projector

PT-RS11

Designed for long-lasting stable brightness in events and staging. Laser light source, 3-chip DLP, 12 000 lumens, SXGA+ projector.

Volledige specificaties Share page

Belangrijkste kenmerken

Laser 3-chip DLP, 12000 lumens, SXGA+

120Hz high frame rate for superb and sharp motion pictures

Lamp-free laser projection and dust resistant liquid cooling system with 20000 hours of free maintenance

20,000:1 contrast ratio

	PT-RQ13	PT-RZ12	PT-RS11
Brightness	10,000 lm	12,000 lm
Resolution	5,120 x 3,200 px	1,920 x 1200 px	1,400 x 1,050 px
Contrast	20,000:1

Real-motionprocessor combineert het maken en het verwerken van frames bij 120 Hz voor vloeiende bewegingsreductie
Indrukwekkende helderheid van 12.000 lm
's Werelds lichtste 3-chip DLP™-projector van 45 kg (vanaf juni 2015)
Dynamisch contrast zorgt voor contrastverhouding van 20.000:1*1 door laserlicht te regelen
Nieuwste generatie Detail Clarity Processor levert natuurlijke texturen tot de fijnste details
System Daylight View 3 voor verbeterde kleurwaarneming in fel verlichte ruimtes en kaarttoepassingen.
DICOM-simulatiemodus voor medische presentaties en trainingen*2
Rec. 709-modus reproduceert kleuren nauwkeurig voor HDTV-projectie

show more show less

Lagere exploitatiekosten, hogere betrouwbaarheid

Lichtbron met extreem lange levensduur van 20.000 uur*3
Nieuw vloeistofkoelsysteem zorgt voor stille werking
Stabiele werking bij omgevingstemperaturen tot 45 °C*4
Consistente kleurweergave zonder verslechtering van de beeldkwaliteit op de lange termijn
Dankzij laserlichtbron is 24/7-gebruik mogelijk
Stofdicht optisch blok
Breed lensverschuivingsbereik

360-graden installatieflexibiliteit

360-graden verticale, horizontale en tilt-projectie mogelijk dankzij laserlichtbron
Multi-Screen Support-systeem voor naadloos aansluitende projectiebeelden met randovervloeiing, kleuraanpassing en digitale beeldvergroting.
Geometrische aanpassing voor projectie op kromme of gebogen oppervlakken
Compatibel met kit voor automatische schermaanpassing ET-CUK10*5
Helderheidsregeling voor meerdere schermen
Compatibel met meervoudige bewakings- en besturingssoftware van Panasonic en Early Warning-software.
Via DIGITAL LINK-aansluiting met één kabel kunnen video- en besturingssignalen over afstanden tot 100 m worden overgedragen
Compatibel met verlichtingsregelingsprotocol Art-Net DMX
Ruime aansluitmogelijkheden waaronder 3G-SDI, DIGITAL LINK, DVI-D en HDMI
Deelt gemeenschappelijke lenzen (inclusief de ET-D75LE90 ultra-short-throw-lens) met 3-chip DLP™-projectorserie van Panasonic.

_{*1 Volledig aan/uit, met dynamisch contrast ingesteld op “3”,}
_{*2 Dit product is geen medisch instrument. Niet gebruiken voor werkelijke medische diagnose,}
_{*3 Gebruiksomgeving is mogelijk van invloed op levensduur van de lichtbron,}
_{*4 Lichtopbrengst kan lager zijn om de projector te beschermen afhankelijk van omgevingsomstandigheden,}
_{*5 ET-CUK10 is beschikbaar voor gebruik over de hele wereld, behalve in de Verenigde Staten. Verkrijgbaarheid varieert per land}

Specifications table

Lamp	3-Chip DLP Laser
Brightness	12,000 lumens
Resolution	1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Power Supply	AC 100-240 V 50/60 Hz
Power Consumption	1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3
BTU Value	Max 4,096 BTU
DLP™ Chip \| Panel Size	24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 3 (R, G, B), DLP™ projection system

Volledige specificaties

Accessoires & Software

Showing 0 of 0

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEF70

A wide 91.5° viewing angle achieves maximum screen coverage with a single projector.

View product

Key Features
Compatible with high-brightness 3-chip DLP projectors up to 30,000 lm brightness
Supports WQXGA (4K+) ultra-high-resolution image projection
Installation flexibility is supported by wide lens-shift (vertical: up to ± 37 %, horizontal: up to ± 17 %).
Adapted for dome-theater applications in planetariums, video domes at exhibitions, or theme-park attractions

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEU100

Project in tight spaces from very short throw-distances. With zero offset capability, these two lens options widen the versatility of Panasonic’s 3-Chip DLP™ lineup.

View product

Showing 2 of 2

Showing 0 of 0

Gerelateerde bronnen

Image Data

Spec Files

Operating Instructions

Technical Documents

Brochures

Full specifications

Download specifications

Lamp	3-Chip DLP Laser
Brightness	12,000 lumens
Resolution	1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Power Supply	AC 100-240 V 50/60 Hz
Power Consumption	1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.), Average power consumption NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W LONG LIFE 3: 550W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Picture mode: Dynamic, Dynamic Contrast3
BTU Value	Max 4,096 BTU
DLP™ Chip \| Panel Size	24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ Chip \| Pixels	1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels
Lens	Optional powered zoom/focus lenses
Light Source	Laser Diode (Laser class: Class 1) Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³ 43,800 hours at constant luminance (Longlife1) 61,320 hours at constant luminance (Longlife2) 87,600 hours at constant luminance (Longlife3)
Screen Size	1.78-25.4 m (70-1,000 inches) (4:3 aspect ratio) 1.78-15.24 m (70-600 inches) with the ET-D75LE8 (4:3 aspect ratio) 3.05-15.24 m (120-600 inches) with the ET-D75LE90 (4:3 aspect ratio)
Center-to-Corner Uniformity	90%
Contrast	20,000:1 (full on/full off, in Dynamic Contrast 3 mode)
Scanning Frequency \| SDI	SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE ST 259 compliant: 525i(480i), 625i(576i) Single-link HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 292 compliant: 750(720)/60p, 750(720)/50p, 1125(1035)/60i, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 372 compliant: 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p Dual-link HD-SDI signal (X Y Z 4:4:4 12-bit): SMPTE ST 372 compliant: 2048 x 1080/24p, 2048 x 1080/24sF, 2048 x 1080/24p, 2048 x 1080/24sF 3G-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 424 compliant: 1125(1080)/60p, 1125(1080)/50p 3G-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 424 compliant: 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p Dual-link 3G-SDI signal (YPBPR 4:4:4 12-bit/10-bit): SMPTE ST 425 compliant: 1125(1080)/60i, 1125(1080)/50i, 2048 x 1080/48p, 2048 x 1080/50p, 2048 x 1080/60p Dual-link 3G-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 425 compliant: 1125(1080)/60i, 1125(1080)/50i, 2048 x 1080/48p, 2048 x 1080/50p, 2048 x 1080/60p
Scanning Frequency \| HDMI/DVI-D	Horizontal: 15 kHz-100 kHz, vertical: 24 Hz - 120 Hz, dot clock: 25 MHz - 162 MHz
Scanning Frequency \| RGB	Horizontal: 15 kHz-100 kHz, vertical: 24 Hz - 120 Hz, dot clock: 162 MHz or less
Scanning Frequency \| YPBPR (YCBCR)	525i (480i): fH 15.73 kHz; fV 59.94 Hz, 625i (576i): fH 15.63 kHz; fV 50 Hz, 525p (480p): fH 31.47 kHz; fV 59.94 Hz, 625p (576p): fH 31.25 kHz; fV 50 Hz, 750 (720)/60p: fH 45.00 kHz; fV 60 Hz, 750 (720)/50p: fH 37.50 kHz; fV 50 Hz, 1125 (1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency \| Video/Y/C	fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical Axis Shift \| Vertical	±50% (±40% with the ET-D75LE6), (+71% with the ET-D75LE90), from center of screen, powered
Optical Axis Shift \| Horizontal	±30% (±20% with the ET-D75LE6) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50/ET-D75LE90.
Keystone Correction Range	Vertical : ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90), horizontal: ±15° (0° with the ET-D75LE90)
Installation	Ceiling/floor, front/rear
Terminals \| SDI In 1	BNC x 2, (3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI) 3G-SDI signal: SMPTE ST 424 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
Terminals \| HDMI In	HDMI 19-pin x 1, Deep Color, compatible with HDCP, NOTE: Compatible with non-interlaced signals only.
Terminals \| DVI-D In	DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals \| RGB 1 In	BNC x 5
Terminals \| RGB 1 In \| R, G, B	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 1 In \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| RGB 1 In \| Video in	BNC x 1, 1.0 Vp-p 75 ohms Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals \| RGB 2 In	D-sub HD 15-pin (female) x 1
Terminals \| RGB 2 In \| R, G, B	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals \| RGB 2 In \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| 3D Sync 1 In/Out	BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals \| 3D Sync 2 Out	BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals \| Serial In	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| Serial Out	D-sub 9-pin (male) x 1 for link control
Terminals \| Remoter 1 In	M3 jack x 1 for wired remote control
Terminals \| Remoter 1 Out	M3 jack x 1 for link control
Terminals \| Remoter 2 In	D-sub 9-pin x 1 for external control (parallel)
Terminals \| DIGITAL LINK/LAN	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible
Power Cord Length	3.0 m (9 ft 10 in)
Cabinet Materials	Molded plastic
Dimensions (W x H x D)	578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 inches) (without lens)
Weight	44 kg (97.0 lbs) (without lens)
Operating Noise	43 dB
Operating Temperature	Normal The operating temperature range is 0°C to 50°C (32 °F to 122 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level, and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.) Eco/Long life 1/2/3 The operating temperature range is 0°C to 45°C (32 °F to 113 °F). (Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.) When the projector is used with a Smoke Cut Filter The operating temperature range is 0°C to 40°C (32 °F to 104 °F). (The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.) * The brightness of the light source may drop depending on the operating temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be.
Applicable Software	10%-80% (no condensation)
Technology	3-chip DLP Laser

Compact Solid Shine Laser 12 000 lumens Projector

PT-RS11

Belangrijkste kenmerken

Lagere exploitatiekosten, hogere betrouwbaarheid

360-graden installatieflexibiliteit

Product galerij

Specifications table

Accessoires & Software

ET-D3LEF70

ET-D3LEU100

Gerelateerde bronnen