PT-DW17K2

Discontinued

3DLP - 17000 lumens - WXGA - 4Lamps - Exchangeable lens - 3D /HD-SDI/ Portrait Mode/ Digital Link/ 10000:1

View full specifications Share page

Key features

3-chip DLP, 17000 lumens, WXGA

Compact design, light weight and low noise level (as low as 46db)

Quad-lamp redundancy for failsafe operation

Fully featured for single or multi-mapping installations

Compact 17.000lm*1Projector Delivers Stunning Picture Quality

17.000lm^*1 of Brightness with a contrast ratio of 10.000:1 from an extraordinarily compact body
Providing a variety of advanced features, such as DIGITAL LINK connectivity, portrait mode capabilityand multi-screen projection

^{*1 17,000 lm for the PT-DW17K2, and 16,000 lm for the PT-DZ16K2.}

Benefits of PT-DW17K2:

1. Ultra High and Detailed Images

17,000 lm of brightness (PT-DW17K2: 17,000 lm, PT-DZ16K2: 16,000 lm) for large venues.
Next-generation Detail Clarity Processor delivers crisp and detailed image quality.
High 10,000:1^*1 contrast ratio with Dynamic Iris.
System Daylight View 3 for enhanced color performance in bright rooms and mapping applications.
Waveform Monitor function for easy adjustment of black/white level.
DICOM Simulation mode for medical presentations and training^*2.

Show more Show less

2. High Reliability and Low TCO

Extended lamp replacement cycle of 3,000 hours^*3.
Liquid cooling with highly efficient quad-lamp system reduces operational noise.
Stable operation in ambient temperatures of up to 45 ° C^*4.
Quad-lamp system allows 24/7 operation in Lamp Relay mode.
Easy lamp replacement from rear side.
Eco filter requires no maintenance for 12,000 hours^*5.
Durable, precision-tuned optical engine.
High efficiency lamps reduce power consumption.

3. Versatile Installation Flexibility

Flexible installation with 360 ° vertical cabinet rotation.
Multi-Screen Support System seamlessly joins screens with Edge blending, Color matching, and Digital image enlarging.
Multi-Unit Brightness Control.
Compatible with Panasonic Multi Monitoring & Control Software and Early Warning Software.
Single-cable DIGITAL LINK connection transmits video and control signals for up to 100 m (328 ft).
Portrait mode capability (PT-DZ21K2/DS20K2/DW17K2. Mounting the optional lamp units for portrait mode is required)^*6.
Abundant terminals including 3G-SDI inputs (PT-DZ21K2/DS20K2 features inputs x 2 and PT-DZ16K2 has input x 1).

^{*1 Full on/off, with Dynamic Iris set to “3”, *2 This product is not a medical instrument. Do not use for actual medical diagnosis, *3 Usage environment affects lamp replacement cycle, *4 Operating temperature range is 0-40 °C (32-104 °F) when projector is used in Portrait mode or High Altitude mode for altitudes 1,400-2,700 m (4,593-8,858 ft).}
^{Operating temperature range is 0-35 °C (32-95 °F) when projector used in Portrait mode in High Altitude mode, *5 Usage environment affects filter replacement cycle, *6 Installation is possible only with the terminal side facing downward. Horizontal rotation and vertical rotation are both limited to 15 °, Additionally, lamp life is reduced to 700 hours depending on usage environment.}

Product gallery

Specifications table

Brightness	17,000 lumens (four lamp)
Resolution	1,366 x 768 pixels (Input signals that exceed this resolution converted to 1,366 x 768 pixels.)
Lamp	432 W UHM lamps (x 4) (four lamp system)
Power Supply	200 - 240 V AC, 12 A , 50/60 Hz ( 3-wire single-phase)
Power Consumption	2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU ( without light o utput: 6,758 BTU )
DLP™ Chip \| Panel Size	21.6 mm (0.85 inches) diagonal (16:9 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 3 ( R, G, B), DLP™ projection system
DLP™ Chip \| Pixels	1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels

View full specifications

Product series

PT-DZ21K2 series

PT-DZ21K2 series
Model	PT-DZ16K2	PT-DW17K2	PT-DS20K2
Lens test	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses
Projector Type	432 W UHM lamps (x 4) (four lamp system)	432 W UHM lamps (x 4) (four lamp system)
DLP™ Chip \| Panel Size	24.1 mm (0.95 inches) diagonal (16:9 aspect ratio)	21.6 mm (0.85 inches) diagonal (16:9 aspect ratio)
DLP™ Chip \| Display Method	DLP™ chip x 3 (R, G, B), DLP™ projection system	DLP™ chip x 3 ( R, G, B), DLP™ projection system
DLP™ chip \| Number of Pixels	2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels	1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels
Brightness	16,000 lumens (four lamp)	17,000 lumens (four lamp)	20000 lumens (four lamp)
Resolution	1,920 x 1,080 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,080 pixels.)	1,366 x 768 pixels (Input signals that exceed this resolution converted to 1,366 x 768 pixels.)	1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Contrast Ratio	10,000:1 (full on/full off, in dynamic iris 3 mode)	10,000:1 (full on/full off, in dynamic iris 3 mode)
Screen Size	1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8 tele), (1.78-7.62 m(70 - 300 inches) with the ET-D75LE5, 16:9 aspect ratio	1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:9 aspect ratio
Optical Axis Shift \| Vertical	±60% (±50% with the ET-D75LE6, +75-+88% with the ET-D75LE90) from center of screen, powered	±70% (±60% with the ET-D75LE6, +78-+96% with the ET-D75LE90) from center of screen, powered
Optical Axis Shift \| Horizontal	±20% (±15% with the ET-D75LE6, -12-+14% with the ET-D75LE90) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.	±30% (±20% with the ET-D75LE6, -13-+27% with the ET-D75LE90) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Lens	Optional powered zoom/focus lenses	Optional powered zoom/focus lenses
Installation	Ceiling/・or, front/rear	Ceiling/floor, front/rear
Terminals \| SDI In	BNC x 1, 3G-SDI signal: SMPTE ST 424 compliant Dual-link HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
Terminals \| HDMI In	HDMI 19-pin x 1, Deep Color, compatible with HDCP	HDMI 19-pin x 1, Deep Color, compatible with HDCP
Terminals \| DVI-D In	DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single l ink only	DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals \| RGB 1 In	BNC x 5	BNC x 5
Terminals \| RGB 1 In \| R, G, B	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 1 In \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| RGB 2 In	D-sub HD 15-pin (female) x 1	D-sub HD 15-pin (female) x 1
Terminals \| RGB 2 In \| R, G, B	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative a utomatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 2 In \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| Serial In	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| Serial Out	D-sub 9-pin (male) x 1 for link control	D-sub 9-pin (male) x 1 for link control
Terminals \| Remote 1 In	M3 jack x 1 for wired remote control	M3 jack x 1 for wired remote control
Terminals \| Remote 1 Out	M3 jack x 1 for link control	M3 jack x 1 for link control
Terminals \| Remote 2 In	D-sub 9-pin (female) x 1 for external c ontrol (parallel)	D-sub 9-pin (female) x 1 for external control (parallel)
Terminals \| DIGITAL LINK	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible Deep Color, compatible with HDCP	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible Deep Color, compatible with HDCP
Power Supply	200 - 240 V AC, 12 A, 50/60 Hz (3-wire single-phase)	200 - 240 V AC, 12 A , 50/60 Hz ( 3-wire single-phase)
Power Consumption	2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU (without light output: 6,758 BTU )	2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU ( without light o utput: 6,758 BTU )
Cabinet Materials	Molded plastic	Molded plastic
Operation Noise	46 dB (quad lamp operation)	46 dB (quad lamp operation)
Operating Temperature	0°- 45°C (32°- 113°F)	0°- 45°C (32°- 113°F)
Dimensions	620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)	620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)
Weight	Approx. 41 kg (90.4 lbs) (without lens)	Approx. 41 kg (90.4 lbs) (without lens)

Accessories & Software

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

View product

Key Features
Simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Transmission up to 100m
Abundant input terminals, including two sets of HDMI and RGB inputs.
A separate audio output enables sound to be output when the display power is turned off.
ET-YFB100G input can be selected with the remote control of a Panasonic display with DIGITAL LINK compatibility.

Showing 1 of 1

Digital Interface Box

ET-YFB100G

By combining the ET-YFB100G with a DIGITAL LINK-ready device, video, audio and control signals can be transmitted over a single cable.

View product

Key Features
Simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Transmission up to 100m
Abundant input terminals, including two sets of HDMI and RGB inputs.
A separate audio output enables sound to be output when the display power is turned off.
ET-YFB100G input can be selected with the remote control of a Panasonic display with DIGITAL LINK compatibility.

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

View product

Key Features
Long-distance DIGITAL LINK transmission of up to 150 m through a single LAN cable
Lower cabling costs and reduced wiring complexity
Self-contained with integrated splitter, switcher, scaler, and DIGITAL LINK conversion technology
Connect multiple ET-YFB200G switchers to accommodate extra display devices
Compact half-rack dimensions

Showing 1 of 1

DIGITAL LINK Switcher

ET-YFB200G

2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.

View product

Key Features
Long-distance DIGITAL LINK transmission of up to 150 m through a single LAN cable
Lower cabling costs and reduced wiring complexity
Self-contained with integrated splitter, switcher, scaler, and DIGITAL LINK conversion technology
Connect multiple ET-YFB200G switchers to accommodate extra display devices
Compact half-rack dimensions

Showing 1 of 1

Lamps

ET-LAD520

UHM lamp x 1

View product

Lamps

ET-LAD520PF

UHM lamp x 4, For portrait mode

View product

Showing 2 of 2

Lenses for 3-Chip DLP < 35.000 lumens

ET-D75MC1

Lens motor cover for 3-DLP projectors

View product

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEF70

Fisheye lens for 3-Chip DLP projectors perfect for dome and planetarium projection

View product

Key Features
Compatible with high-brightness 3-chip DLP projectors up to 30,000 lm brightness
Supports WQXGA (4K+) ultra-high-resolution image projection
Installation flexibility is supported by wide lens-shift (vertical: up to ± 37 %, horizontal: up to ± 17 %).
Adapted for dome-theater applications in planetariums, video domes at exhibitions, or theme-park attractions

Lenses for 3-Chip DLP < 35.000 lumens

ET-D3LEW50

0.7:1 throw ratio (WUXGA) Fixed-focus Lens for 3-Chip DLP Projectors

View product

Showing 3 of 3

Filters

ET-EMF510

Eco filter

View product

Showing 1 of 1

Software

Multi Monitoring and Control Software

Remote control, monitoring, and live status reporting about your projectors and displays fleet from an intranet.

View product

Key Features
Status of up to 2 048 devices can be checked from a single PC.
Easily manage groups of devices by “Group” or “Keyword” categories according to location or application.
Scheduled commands can be executed for a selected device or for multiple devices. Functions include control commands, image distribution, projector brightness control, delivery of a content list, Light ID control, and more.
Distribute media from a content playlist, including stills and video, from PC to selected projectors and displays. LinkRay™ Light ID transmission is also supported on selected devices.
Expend your possibilities by addding Early Warning software and add predictive maintenance and alert functions to your monitoring system.

Showing 1 of 1

Brackets

ET-PKD520S

The Low ceiling mount bracket is designed for compatibility with PT-DZ21K2E, PT-DS20K2E, PT-DW17K2E, PT-DZ16K2, PT-RZ12K, PT-RQ13K projectors.

View product

Showing 1 of 1

PT-DW17K2

Key features

Compact 17.000lm*1Projector Delivers Stunning Picture Quality

Benefits of PT-DW17K2:

1. Ultra High and Detailed Images

3. Versatile Installation Flexibility

Product gallery

Specifications table

Product series

Accessories & Software

ET-YFB100G

ET-YFB100G

ET-YFB200G

ET-YFB200G

ET-LAD520

ET-LAD520PF

ET-D75MC1

ET-D3LEF70

ET-D3LEW50

ET-EMF510

Multi Monitoring and Control Software

ET-PKD520S

Related resources