Products

The AM100 meets the high standards of reliability, capacity and flexibility that customers look forward to in a cost-efficient, gradationally scalable, high-mix SMT solution. It only takes one machine to start off production and extra units and/or technologies can be easily integrated according to requirements. The single-head (single beam) of Panasonic's AM100 modular placement machine is able to place an impressive component array including: 0402 mm to 120 x 90 x 2 8mm, odd-shaped components, large connectors, as well as advanced packaging types e.g.Features The single solution AM100 provides high net productivity and versatility. Equipped with a 14-nozzle head and 160 feeders the AM100 can place an impressive component range. On top the non-stop changeover allows you to prepare the next product process during running production. An off-line setup support station and a feeder set-up navigator option improves operating time and minimizes the downtime.

The RL132 combines functionality and speed with an insertion rate up to 25,700cph (.14s/component), a board processing sizes up to 650 x 381mm, a 33% reduction in PCB transfer time, up to 18% reduction in electrical and air consumption per insertion and an improved parts lifespan for a very low cost of ownership. This through-hole machine features a 4-pitch span and is configurable with 40 or 80 components inputs. Meanwhile, its dual split carriage enables machine function at exchange mode and parts replenishment during production. The RL132 was designed for a non-stop productivity. The Lead V cut method enables the RL132 to insert radial lead components at a speed of 0.14s/component. Either a 2-pitch (2.5mm/5.0mm), 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) option can be selected. The fixed feeder unit method and an out-of-component detection function allow ongoing component replenishment and long-term runs. PCB of 650mm x 381mm can be processed.

Featuressmart-factory-solutions software panacim-logo-02PanaCIM-EE Gen2 is the next generation of PanaCIM-EE, which allows for more efficient electronics manufacturing. This digital planning tool is necessary to enable reliable data management. This applies not only to individual systems, but to entire production lines, in which the data of each individual machine is included in the analysis. In addition, data from reports and management are included in the planning. This allows higher production rates and shorter cycle times to be achieved to make electronics production even more efficient and reliable. The PanaCIM-EE Gen2 is the next generation of a smart factory solution, connecting the shop floor with overall the management system. This includes precise inventory management, maximized factory performance based on a continuous production, total traceability, real time monitoring and optimization and an accurate in-time material supply. Material verificationMaterial controlTraceabilityProduction monitoring/dispatchProduction analysisMaintenanceEnterprise link

FeaturesThe line management system NPM-DGS provides various features, like the Multi-CAD import, tact simulations, a component library of all pick and place machines, displaying of placement and inspection head data on the display during operation, production data optimization and an optional off-line component data creation to make the work preparation as easy as possible, by guaranteeing an improved and more efficient placement process. NPM-DGS offers to create off-line component data and improves productivity and the data generation workflow. A parts library for the entire shop floor can be centrally managed. With simulations the total operating rate of the production line can be checked. With the MJS-function the feeder replacement can be reduced. The PPD/LWS Editor helps to quickly and easily edit the production data. Multi-CAD importMost CAD data formats can be imported through macro definitions. A polarity check in performed in advance. Optional off-line component data creationDGS works with any flatbed scannerand offers the ability  to create off-line component data or with the NPM off-line camera unit to improve productivity and  quality of the data generation workflow Component library A parts library for all placement equipment in the entire shop floor can be centrally managed, even including data from the CM series. SimulationCheck the tact simulation in advance on the screen and improve the total operating rate of the line. Mix Job Setter (MJS)A common feeder arrangement is advantageous when manufacturing multiple different products, since the reduction in feeder replacement time increases productivity. PPD/LWS EditorReduce loss times by quickly and easily editing the production data of the placement and inspection heads on the PC screen during production.

The NPM-WX  represents the  next  generation  of  Panasonic’s  mounting  production  concept “Smart manufacturing”. The platform represents higher  line  throughput  and  improved  quality  at  lower cost  thanks  to  integrated  automated  systems.  APC  system  and  automatic  recovery  are  integrated  to provide autonomous line control.  The  incorporated  floor-management system and  remote-operation option  improve  utilisation  combined  with  lower  labour  costs.  Feeder  set-up  and  component supply  navigation  systems  are available, helping  to  reduce  the  work  variations.The  NPM-WX  can  handle  a  wide variety  of  components, from  0402  chip  components  up  to  large  components with  a max. size  of 150x25x40 mm.  Parts can be supplied from  tape,  stick or tray-feeder . Feeder-cart  flexibility can be provided by selecting the existing 30-input feeder cart or inserting two 17-inpu

Mounting feed-forward function Components can be placed correctly based on the solder printing position. Placement skip data feed-forward/Block recognition data feed-forward Placement machine recognition time reduction based on feed-forward discrepancy data. Misplacement of components using a modular placement machine can be prevented based on feed-forward solder/land* printing defect block data.*When inspecting lands on which package components are placed using flux epoxy. Printing position data feedback The solder printing position misalignment is measured by the inspection machine. The positioning correction is transferred by means of feedback to the screen printer. The solder printing area is measured by the inspection equipment. The stencil cleaning direction can be compared with the reference value by means of feedback.

FZ-VSTN11U

TOUGHBOOK N1 Extended Battery Pack

THE SHOULDER STRAP (FZ-VNS401U) IS DESIGNED FOR COMPATIBILITY WITH THE TOUGHBOOK 40

The Desktop Port Replicator (CF-VEB201U) is designed for compatibility with TOUGHBOOK G2, G1 models

THE DESKTOP PORT REPLICATOR (FZ-VEB401U) IS DESIGNED TO PROVIDE CONNECTIVITY AND FUNCTIONALITY IN A DESKTOP ENVIRONMENT, FULLY COMPATIBLE FOR THE TOUGHBOOK 40

THE LI-ION BATTERY PACK (FZ-VZSU1XU) HAS AN IMPRESSIVE 18 HOURS OF BATTERY LIFE AND CHARGED IN 3 HOURS, FULLY COMPATIBILITY FOR THE TOUGHBOOK 40